Survey, Supply, Transportation, Carriage, Erection, Testing and Commissioning for Creation of 630kva susbstaion with HT line for E-Buses charging units at New Bus Stand Udhampur on turnkey basis

Survey, Supply, Transportation, Carriage, Erection, Testing and Commissioning for Erection of 630 KVA, 11/0.415 KV Sub station alongwith 120 mm² AB Cable on 11 mtr. long ST poles for E-Buses charging unit alongwith tapping point at New Bus Stand Near (Hanuman Mandir).

11 Mtr. Long pole (ST-410 SP-56)

GI V Cross -arm with top Bracket including clamps

GI Channel X-arm including clamps and Angle for braces

11 KV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, vertical

Heat Shrinkable outdoor cable termination kit

Suppply Heat Shrinkable, outdoor cable termination kitmfor 120mm² 11 KV, HT AB Cable

120mm² AB (HT) Cable (3x120+1x95mm²) XLPE (11 KV, 3C+Earth)

Suspension/Tension clamps with eye hook

PG Clamps

11 KV Polymer composite Pin Insulator 12 KV, 5 KN, lighting impulse 75 KV Positive and 80 KV Negative, Creepage distance 320mm.

11 KV Polymeric Composite Disc insulator 12 KV, min failing load 45 kn, lightening impulse 75KV Positive and 80 KV Negative, creepage distance 320mm with fitting

Galvanized Nuts and Bolts

Danger Plates with Clamps

Anti climbing device with clamps

Earthing complete by GI Rod 20 mm, 2.5 mtr long through G.I. Strip 25X3 mm

Painting of 11 mtr ST poles with one coat of Red oxide Paint.

Painting of 11 mtr ST poles with two coat of Aluminium Paint.

Cement bottoming 1:2:4 mix as per REC standard (0.5 cum per pole)

Galvanised Stay Set with 50x8mm stay clamp, guy insulator (2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Survey, Design, Supply, Transportation, Carriage, Erection, Testing and Commissioning for installation of 630 KVA Sub Station for providing power supply to E-Busses charging unit at New Buses stand (Near Hanuman Mandir) Udhampur.

11/0.433 KV, 3-phase distribution Transformer 630 KVA with Bimetallic Terminal Connectors Energy Level-2 Copper Wound, & with LV Cable box having detachable Aluminium Gland plate

Gapless surge Arestor, 9 kv, 10 KA , LA with polymer housing stn. Type

11 KV GO AB Switch 3 phase, 3 pole, 200 Amp, vertical

11 KV Horn gap fuse set 3 phase 200 A

630 mm² 1.1 KV Grade, PVC insulated stranded Al. conductor FRLS Type

9 mtr. Long ST pole (ST-410 SP33)

11 KV Polymeric Composite Disc insulator 12 KV, min failing load 45 kn, lightening impulse 75 Positive and 80 KV Negative, creepage distance 320mm with fitting

GI Channel /Angle/flat of sizes including clamps

Galvanized Nuts and Bolts.

Earthing of sub stn. Excavation of earth pit of dia 650mm & depth 3000mm installation of earthing pipe of 40mm Nominal bore & 4mm wall thickness & length 2.5 mtr. Long as per IS 1239. G.I Strip for neutral earthing of size 25mmx3mm for connection of transforemr body, GO Set & lightening arrestor as per IS 2629/85, GI Nuts & bolts refilled with earth enhancement materials and earth chamber with RCC Slab cover

11 KV Poloymer composite pin insualtor, 12 KV, 5KN Lightening impulse 75 KV Positve and 80 KV Negative, creepage distance 320mm

LT distribution box for 630 KVA DTR with MCCB for incomer and SFU's for outgoing circuits

Galvanised Stay Set with 50x8mm stay clamp, guy insulator (2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

PG Clamps

Danger Plates with Clamps

GI Barbed wire for Anticlimbing

3-phase HT Trivector meter with CT PT Unit

Cement bottoming 1:2:4 mix as per REC standard 0.5 cum per pole

Painting of ST poles 9 mtr. long with 1 coat of Red oxide & 2 coat of Al. paint

Construction of PCC platform 3.0 mtr. x 3.0 mtr x 1.20 mtr in PCC 1:3:6.Providing & fixing of G.I chain link fabric fencing made of 4mm G.I Wire of requried width (4'-0") in Mesh Size 50x50mm with Nuts , bolts and washers of 12mm dia inculding providing of MS Angle iron 50x50x6mm and flat iron 50x6mm with top and bottom runner of angle iron 50x50x6mm one side detachable and Provision of Gate on fixed side . Painting of MS Angle iron and flat iron with one coat of Red oxide & two coat of Al. paint as per direction of Engineer Incharge (1 No. Complete Job)

M/S JCM CONSTRUCTIONS

DINESH KUMAR KHAJURIA

ADITYA SHARMA

M/S SURAJ PARTAP SINGH

VEENA CONSTRUCTION CO.

power control system