REPAIR MAINT OF STP 30 KLD to 100 KLD INCLUDING CERTAIN BR WORKS AT GMS UNDER GE I GOS

Amount

S&F in repair PVC waste pipe for WHB etc complete all as specified and directed.

S&F in repairs 32 mm bore waste coupling of (min weight 32 mm-45 gm of PTMT) (half or full threaded) etc complete all as specified and directed.

S&F in repair CP grating 100 mm dia with waste hole (minimum weight 40 gm) complete all as specified and directed.

S & F in repair CP Jet spray for 15 mm bore complete all as specified and directed.

S & F in repairs Hand shower (Health faucet) with 1 mtr long Easy flex tube in crome finish & wall hook complete all as specified and directed. Cat ALD-CHR-565 Make Jaquar or Equivalent

S & F in repair bottle trap chromium plated for WHB as per approved quality complete all as specified and directed.

S&F in repairs for vitreous china wash basin, white,flat back, size 550 x 400 mm including supply & fixing of brass chromium plated coupling 32 mm etc complete all as specified and directed.

S&F in repair Wash down water closet vitreous china white pedestal pattern with 'P' or 'S' trap including connecting to outgoing drain pipe & to flushing pipe excluding flushing cistern and flush pipe complete all as specified and directed.

S&F in repairs plastic water closet seat cover, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repairs vitreous china squatting pan , ‘Orissa’ Pattern, size 580 X 440 mm white, with integral foot rests etc. complete all as specified and directed.

S & F rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 500 litre capacity hoisted and fixed in position including dismantling of old U/S water tank and removing to store complete all as specified and directed.

S & F rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 1000 litre capacity hoisted and fixed in position including dismantling of old U/S water tank and removing to store complete all as specified and directed.

S&F ball valves for 20 mm bore of pipe high pressure of PTMT with Epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gms) complete all as specified and directed.

S&F ball valves for 25 mm bore of pipe high pressure of PTMT with Epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 455 gms) complete all as specified and directed.

S&F in repairs ball valves for 20 mm bore dia of pipe high pressure of PTMT with Epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gms) complete all as specified and directed.

S&F in repairs ball valves for 25 mm bore of pipe high pressure of PTMT with Epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 455 gms) complete all as specified and directed.

S & F in repair PVC Tank cover for 500 Ltr capacity fixed in position with nuts and bolt complete all as specified and directed.

S & F in repair PVC Tank cover for 1000 Ltr capacity fixed in position with nuts and bolt complete all as specified and directed.

Taking down bib tap /wash basin tap/pillar tap/stop cock/mixture tap and refixing the same after repair and replacement of washer only for 15 mm bore size without replacing spindles complete all as specified and directed.

Taking down bib tap /wash basin tap/pillar tap/stop cock/mixture tap and refixing the same after repair and replacement of spindles for 15 mm bore size complete all as specified and directed.

S&F in repair Chromoium plated Bib cock with flanges Quarter turn 15 mm bore complete all as specified and directed. Make-Jaquar FUS-29037 or Equivalent

S&F in repair Chromoium plated angular stop cock for 15 mm bore complete all as specified and directed. Make-Jaquar CON-053KN or Equivalent

S&F in repair Chromoium plated Two-way angular stop cock for 15 mm bore complete all as specified and directed. Make-Jaquar CON-059KN or Equivalent

S&F in repair, 15 mm bore stop cock, cast copper alloy with long shank and cup (concealed type) fancy type chromium plated screwed down high pressure with crutch & butterfly handle screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair 15 mm bore stop cock, cast copper alloy screwed down high pressure with crutch & butterfly handle fancy type chromium plated screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair pillar tap cast copper alloy with capstan head chromium plated screwed down high pressure with or without lettered hot or cold with long screwed shanks and ply nuts 15 mm bore complete all as specified and directed.

S & F in repair Kitchen sink made of stainless steel 1 mm thick with plug washer and waste pipe incl bedding fixing cantilever brackets and connetction union to pipe overall size 915 X 460mm bowl size 405X 355 mm complete all as specified and directed

S& F in repair 1 mm thick stainless steel plate rack of size 900X600X200 incl fixing with rawal plug and screws complete all as specified and directed.

S & F in repair Toilet Paper Holder with Flap complete all as specified and directed. Make-Jaquar AKP-3573P or Equivalent

S&F in repair Single door PVC cabinet mirror of size 300 mm x 450 mm with internal shelves complete all as specified and directed.

S & F in repair sheet Glass Shelf assembly consisting of 5.5 mm thick glass sheet shelf 12 cm wide with cromium plated bracket guard and railing 60 cm long complete all as specified and directed..

S & F in repair Brass chromium plated wall mixer non-telephonic shower arrangement with connecting legs & wall flanges for 15 mm bore of pipe complete all as specified and directed. Make-Jaquar CON-219 KN or Equivalent

S & F in repair Brass chromium plated hole bidet mixer (Basin mixer) with pop-up waste system with 300 mm long braided hoses complete all as specified and directed. Make-Jaquar CON-613KNB or Equivalent

S & F in repair Brass chromium plated Sink mixer with raised J shaped swinging spout (Wall mounted model) with connecting legs & Wall flanges complete all as specified and directed. Make-Jaquar CON-319KN or Equivalent

S&F in repairs, PVC valveless syphonic action type low level flushing cistern, 10 ltrs capacity with inlet, ball valve, float and handle including bracket complete all as specified and directed.

S & F in repair internal fitting for low level flushing cistern (Syphon) complete all as specified and directed.

S&F in repairs flush pipe 32 mm bore of polyethylene of low or high density or PVC, for low level cistern complete all as specified and directed.

S & F in repair 125 mm bore chromium plated shower rose of with or without swivel joint incl fixing to steel pipe complete all as specified and directed.

S&F in repair PVC connection 15 mm bore, 450 mm long complete with both ends unions complete all as specified and directed.

S&F in repair CP anodised tubular towel rail, 20 mm dia, D type, 60 cm long between flanges etc complete all as specified and directed.

S & F in repair 75 mm PVC(SWR) floor trap with grating incl jointing with solvent cement complete all as specified and directed.

S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe of 20 mm bore of pipe complete all as specified and directed.

S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends (ISI marked) for iron pipe of 25 mm bore of pipe complete all as specified and directed.

S & F in repair Soap dish any type fixed to plug with chromoium plated brass screw complete all as specified and directed. Make-Jaquar CAN-1311 N or Equivalent

S & F in repair corner glass shelf with brackets complete all as specified and directed. Make-Jaquar CAN-1173 or Equivalent

S & F in repair double coat hook complete all as specified and directed. Make-Jaquar AQN-7761 or Equivalent

S & F in repair chromium plated towel ring with bracket complete all as specified and directed. Cat AQN -7721 Make: JAGUAR or Equivalent

Taking up or down steel tubing and connections including cleaning if refixing required for 15 mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning if refixing required for 20 mm bore of pipe complete all as specified and directed.

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in Bricks/ stone Masonary wall complete all as specified and directed.

S&F GI tubes medium grade (ISI marked) with all fittings fixed complete to walls, ceilings or laid in floors of 15 mm bore of pipe complete all as specified and directed.

S&F GI tubes medium grade (ISI marked) with all fittings fixed complete to walls, ceilings or laid in floors of 20 mm bore of pipe complete all as specified and directed.

S & F 15 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings complete to walls, ceilings or in floors complete all as specified and directed.

S & F 20 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings complete to walls, ceilings or in floors complete all as specified and directed.

Making connection of PPR distribution branch with PPR main of following outer dia of pipe 16 to 40 mm size by providing and fixing tee including cutting and making fusion joint etc complete all as specified and directed.

Refixing old steel tubing and connections in new or old position (wall, floor, ceiling etc) of 15 mm bore of pipe complete all as specified and directed.

Refixing old steel tubing and connections in new or old position (wall, floor, ceiling etc) of 20 mm bore of pipe complete all as specified and directed.

Supply only liquid chlorine complete all as specified and directed

S&F lubiricant oil (320 Gde) at every two months including draining out old oil from engine of blowers of any capacity and cleaning oil chamber complete all as specified and directed.

S&F lubiricant oil (320 Gde) at every two months incl draining out old oil from engine of FAB feed pumps of any capacity and cleaning oil chamber complete all as specified and directed.

S&F in repalcement of FAB feed pump spiders complete all as specified and directed.

Supply and use bleaching powder ISI marked in 15 Kg bag

S&F Poly aluminium chloride liquid 100% concentrate complete all as specified and directed.

S&F Poly electrolite liquid 100% concentrate complete all as specified and directed.

Dismantling complete Air compressor set of any type & overhauling the same with repair,checking fan blades,cleaning of dirt & debris,proper belt tension, lubricating of bearing,checking of wornout holes of studs and provinding same with nuts,washers & gaskets.Rematting and balancing of piston,repair of piston rings,Split pin,scrapper ring,castle nuts,bushing and sealing ring of compressor,gland packing,and refitting the same after repair duly complete all as specified and directed for smooth functioning of capacity 1-3 Hp

All as per Item No. 66 above but of capacity 5-10 Hp

All as per Item No. 66 above but of capacity 10-15 Hp

All as per Item No. 66 above but of capacity 15-25 Hp

S & F in replacement butterfly Valve complete all as specififed and directed. of following dia : (a) 100 mm

Preparation of old surface by scraping and smoothing the surface with water emery paper and painting with approved colour of synthetic enemelled paint of two coat over a coat of primer red oxide and writing letters/numbers(SM/MES Nos. and DATE OF CLEANING ) of sewage treatment plants of capacities 600/800 CUM/Day and cleaning the srounding area up to three metre out side area of the plant by cutting grasses and surface dressing for Moving Bed Bio Reactor 1 & 2 etc complete all as specified and directed.

All as per Item No 74 above but dual Media filter.

All as per Item No 74 above but Activated carbon filter.

All as per Item No 74 above but Exposed water pipe lines.

All as per Item No 74 above but filter feed pump.

All as per Item No 74 above but filter backwash pump.

All as per Item No 74 above but distribution panel board.

All as per Item No 74 above but Tube settler tank.

All as per Item No 74 above but Air Blower with compressor 1 & 2.

Cleaning of sludge drying beds removing all sludges and de-scaling vegetation on the inside and outside of sludge bed and white washing (Two Coat) including Cleaning the surroundings area of the sludge drying beds to a distance of 3 mtrs circumstance including cutting of grass digging out roots, filling holes and levelling around and removing waste materials to a distance not exceeding 50 Mtrs complete all as specified and directed.

All as per Item No 83 above but Equilization Tank and air grid.

All as per Item No 83 above but Bar screen and pit

All as per Item No 83 above but Oil and grease trap

All as per Item No 83 above but Tube settler tank

All as per Item No 83 above but Clear water tank

All as per Item No 83 above but chlorine contact tank.

S& F in replacement 50 mm OD PPR Pipe 3 layer SDR 7.4 & SDR 11 UV stabilized and antimicrobical welded having thermal stability for hot and cold water supply including all PPR plain and brass threaded PPR Fittings fixed complete to walls ,celling or in floors etc complete all as specified and directed.

All as per Item No. 90 above but 110 mm outer dia

All as per Item No. 90 above but 63 mm outer dia

All as per Item No. 90 above but 40 mm outer dia

All as per Item No.90 above but 32 mm outer dia

S&F in replacement PPR gate valve (brass insert) 110 mm outer dia complete all as specified and directed.

S&F in replacement PPR gate valve (brass insert) 63mm outer dia complete all as specified and directed.

S&F in replacement PPR gate valve (brass insert) 50mm outer dia complete all as specified and directed.

S&F in replacement PPR gate valve (brass insert) 40mm outer dia complete all as specified and directed.

S&F in replacement PPR gate valve (brass insert) 32mm outer dia complete all as specified and directed.

S&F Filter media for MBBR complete all as specified and directed.

S&F Carbon for activated carbon filter and dual media filter complete all as specified and directed.

Dismantling the power supply of electric motor any type including dismantling from pump and taking to workshop with necessary transportation and opening the complete motor and rewinding the rotor with super enameled copper wire as per the existing gauge with necessary insulation, sticks and varnishing, including replacement of shaft bearing 02 Nos complete of capacity 20 to 30 HP complete all as specified and directed.

All as per Item No.102 above but of capacity 5 to 7.5 HP electric motor any type.

All as per Item No.102 above but of capacity 10 to 15HP electric motor any type.

All as per Item No.102 above but 1 to 3 HP electric motor any type.

Dismantling complete Centrifugal /Mono Block pump set of any type and overhauling the pump re-threading of wornout holes of studs and providing over size studs with nuts & washers. Rematlling and balancing of shaft, replacement of gunmetal bush bearing and gland packing of pump set. and refitting the same after the repair/replacement duly complete all as specified and tested for smooth functioning of capacity 20 to 30 HP

All as per Item No. 106 above but capacity 10 to 15 HP

All as per Item No. 106 above but capacity 5 to 7.5 HP

All as per Item No. 106 above but capacity 1 to 3 HP

S & F in replacement of non return valve 80 mm dia complete all as specified and directed. Make -KIRLOSKAR/VENUS OR Equivqlent with ISI Marked

S & F in replacement of non return valve 100 mm dia complete all as specified and directed. Make -KIRLOSKAR/VENUS OR Equivqlent with ISI Marked

S&F in replacement of change over switch with panel mounted of 63 amps 4 pole 415 volts capacity complete all as specified and directed.

S&F in replacement of change over switch with enclosure of 100 amps 4 pole 415 volts capacity complete all as specified and directed.

Excavation in trenches not exceeding 1.5 M wide and not exceeding 1.5M deep for foundation/cable trench, not exceeding 10 Sqmm on plan and getting out in soft/loose soil complete all as specified and directed.

Returning filling including spreading, leveling and well ramming in layers not exceeding 25 Cm thick in soil complete all as specified and directed.

Removal of surplus soil to a distance not exceeding 50M and depositing where directed at a level not exceeding 1.5M above the starting point complete all as specified and directed.

M&L in replacement for earthing complete with galvanized steel earth plate electrode size 600x600x6.3 mm thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanized iron strip 32X6 mm earth lead by means of bolts, nuts, check nuts and washers of galvanized steel including GI pipe light grade of size of 40 mm dia for protection and GI pipe light grade 20mm bore for watering funnel with wire mesh. CI cover with frame, PCC chamber pit with PCC 1:3:6 type C-2 excavation and earth work all as shown in electrical plate No 3 of SSR Part I (2009) connected to earthing test point complete all as specified including testing on completion.

Supply ,Fabricate,install,& Commissioning in repair of tank of MBBR as per existing shape and size of require MS sheet 8 mm thick ,rolled and welded to fit into existing place incl cut opening the old surface and scraping the new surface with water emery paper and painting with approved colour of synthetic enemelled paint of two coat over a coat of primer red oxide and writing MBBR on it.complete all as specified and directed.

S&F in repair Pressure Gauge (0-50 as per existing model and make for STPs.complete all as specified and directed.

S&F in replacement of Dosing Pump of capacity 0-6 litrs/Hrs and working pressure capacity of 4 kg incl all necessary fittings complete all as specified and directed.

S&F in replacement Dosing Tank of Capacity 200 Litres,material of construction LDPE/HDPE including all necessary connecting materials complete all as specified and directed.

All as per Item No. 121 above but of capacity 100 Liters

S&F in repair mild steel work for Cross arms, /angle supports bracings, supports, clamps and black plates fabricated from structural steel section including nuts, bolts, washers, welding ,bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint including taking out existing u/s MS work complete all as specified and directed.

S&F fibre glass reinforced translucent corrugated sheeting of thickness 2mm with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed.

Taking down old unserviceable and Supply and fixing centrifugal pump, electric driven 415 v, 3 HP, 2.2 KW,50 mm outlet (Model 2200 CW - Series Make :Kirloskar/CRI including lowering by manpower & mechanical complete all as specified and directed. NOTE: The Unsv. Pumpsets will be Deposited to the AGE E/M Store yard .

Taking down old unserviceable and Supply and fixing centrifugal pump, electric driven 415 v, 5 HP, 3.7 KW,65 mm outlet (Model 3700 CW - Series Make :Kirloskar/CRI including lowering by manpower & mechanical complete all as specified and directed. NOTE: The Unsv. Pumpsets will be Deposited to the AGE E/M Store yard .

Taking down damaged MS channel or angle section etc complete all as specified and directed.

M/S. KISHAN ENGINEERING

S J ENTERPRISES

MM ENGINEERING SYSTEMS

ABC CONSTRUCTION COMPANY

M/s Ats Electricals

M/s MAA BHAIRABI ENTERPRISES

HARAGOURI SUPPLIERS