Construction of stone garphagraham of Eakambareshwarar sannithi Mahamandapam Kamatchi Amman Sannathi Karumari Ammansannathi Bairavar Sannai Anjaneyar sannathi Sandikeswarar sannathi Natarajar sannathi and Navagraham sannathi and providing borewell

Amount

Earthwork excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.

Supplying and filling in foundation, basement, etc with filling sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and filling with Msand gravel mix in the ratio of 1:1 including cost and conveyance of Msand, gravel and all labour charges for filling ramming etc. complete with standard specifications

Plain Cement concrete 1:5:10 (One of Cement, five of Msand and ten of HBG stone jelly )for foundation using 40mm gauge HBG jelly inclusive of shoring strutting and baling out water where ever necessary ramming curing etc.,complete in respects complying with relevant Std, Specification and as directed by the Dept, Officers.

Providing and laying in position, Standardised Concrete Mix M-30 Grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 400 kg/mᶾ and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m.) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials). Foundation and Basement

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid) Roof & slab

Supply of Cut stones from approved quarry to site including cost of stone, loading, conveying charges, unloading and handling charges etc. stones required for upanam to pavukkal.

Length upto 5 feet

Length above 5 feet and upto 10 feet

Length above 10 feet and upto 14 feet

Labour charges for Cut Stone Dressing and fixing of required faces consisting of Aswapadam, Sthamaba, Sthambam, Kalasam, Thadi, Kudam, Palagai, Veerakandam, Bodhiyal, Uthiram, Kambu, Eludham, Kabothagam, Viyalam, Koodu, Ull Vari, Pavukkal, Thun, Flooring, Nilaikal, Bodhiyal Thani, Uthiram, etc neatly finishing, fixing in position and pointing with lime mortar 1:1.5 (Up to about 10 ft)

Chitravanam

Kanttam Pattiyal

Pattiyal

Padma Jagathi

Kumuthagam

Kanttam

Kanttam pattiyal

Vedhigai

Aswapatham sthambam

Kalvari thadi

Kudam palagai

pothigai

Uthiram kambu Eluthagam

Kapothagam

Viyalavari

Pavukkal

Nilaikal

Komugai

Steps

Nasithalai kudu

Nasithalai

Inner vari dressing

Kodungai

Pothiyal(Thani pothiyal)

Special work for Supply, making and fixing in position with hard granite single stone as per drawing.

Supplying and fixing of Three DimensionalSingle Stone of Yali Surulpadi of length 1'9" and height 1'7" and thickness of 9" as per the design & figure shown in diagram (3.1) made of single hard blue granite stone of good quality as per the satisfaction of the departmental officers with good finishing including all charges and properly fixing and positioning at site as directed by the departmental officers

Supplying and fixing of Three Dimensional StoneSannithi of length 2'1" and arch height 2 '7" prime and thickness of 6" prime along with Beedam of length 2'1”and height 1'1" prime prime with thickness 9" as per the design & figure shown in diagram made of hard blue granite stone of good quality as per the satisfaction of the departmental officers with good finishing including all charges and properly fixing and positioning at site as directed by the departmental officer.

Vallaba vinayagar sannithi

Anukai Vinayagar sannithi

Balamurugar sannithi

Flooring with Cut stone slab of size 600 x 600mm, not less than 100mm thick and similar varities with machine cut edges fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with cement mortor 1:3 (One Cement and Three M-sand). The cut stone slabs and other materials to be used shall be got approved by the executive engineer concerned before use on work, etc., complete as per standard specification. with Three Line Dressing

Manufacturing and fixing in position Temple pattern Ornamental Doors with high quality Burma Teak wood with 2" minimum to 7" maximum thick ornamental frame, 2" thickness to 5" thickness Kamala (Flower Planks), creeper, Birds, Animal figures, Sculptures etc., Backside 1" thickness to 3" thickness Plank including necessary carving, shaping and wastage etc., as per approved plan and design.

Weathering course concrete with broken jelly 20mm size and pure unslaked Poigai lime over RCC roof slab / Cut stone slab, the proportion being 32:12.5 (by volume) for required depth of 80mm for giving required slope and thickness of roof on required, well beaten with wooden beater etc, complete with standard specifications.

Supply and Fixing of Copper Kalasam 1'-7" Height, 11" Dia with 20 gauge is high quality Kalasam with a smooth and shine body. Labour Charge for Fixing in Crest of Vimanam, etc., complete with standard specifications.Including Teak wood stump(Sthupi thandu)

Scaffolding charges for Vimanans and gopurams with casurina posts coconut or plam trees wherever necessary for main, form work and providing with non- flammable Sheet coverings, providing ladder arrangements, country wood pland for working, inpection etc, complete hire charges only for erection, maintainance and removing the same on completion of the work Upto 15'0" Height

Finishing the top of roof with one course of machine pressed tiles of size 230 mm x 230mm x 20mm of approved quality laid in Cement mortar 1:3 (One Cement and Three Msand), 12mm thick mixed with water proofing compound 2% by weight of cement used etc, complete with standard specifications.

Ornamental Brick masonary in Cement Mortar 1:4 (One Cement and Four Psand) using ground moulded chamber burnt Stock bricks including all varivargams, mould sthambams mokopathrams, koodu, Nasi and all ornamental brick work complete, all pancharams Agarais, Karanakoodu, etc., forming core walls of Vimanam complete including cost and conveyance of all materials including cement, all the labour charges including marking pathies shaping of the bricks, lifting of all the materials to required heights, curing and all extra for working in heights etc., complete for Vimanam height upto 15 feet (Excluding Kalkaram)

Providing Vargapoochu over the corewalls of Vimanams, with Cement Mortar 1:4 (One Cement and Four Psand), complete including shapping the mukhapathram, mahanasi, Koodu all ornamentals works to proper shape by embdding broken bricks of shaped /chiselled bricks, rough-plastering with Cement Mortar 1:4 (One Cement and Four Psand), and finishing with final ornamental plastering and nayam theervai including cost and conveyance of all materials, labour therefore, lifting of materials, all working in heights, curing with water etc, complete inculding all axtra for folding and inculuding clearing from the vimanams/gopurams for Vimanam height upto 15 feet (Excluding Kalkaram)

Providing New Sudhai Vigrahams in the Vimanams and Rajagopurams with Copper Rod reinforcement of suitable dia with binding wire wherever necessary shaping the core with broken bricks set in Cement Mortar 1:3 (One Cement and Three Psand) fininshing the same with Cement Mortar 1:3 (One Cement and Three Psand), bringing to the correct shape (Lakshana) in confirmity with silpa sastra inclusive of special ornaments, weapons, peedam etc., complete and providing Cement Mortar Nayamtheervai wherever necessary, inclusive of cost and conveyance of all materials, such as cement broken bricks, sand, Copper rods, binding wire, all labour for working in heights , curing lifting of materials etc., complete including Panchavarna Painting 3 coats (Each Vigraham is accountable with One Head, Four Handas, with weapons, Ornamental costumes etc., as per Prathima Lakshana, Vigraham height is measurable from the crown top to the bottom of foot only. If Peedam is provided the rate with Peedam may be adopted as detailed here under)

Painting with multicolour (Panchavarnam) paint for the Vimanam including cost and conveyance of materials,labour charges including working in heights,lifting of all materials etc.,complete complying with standard specifications upto 15 feet height .

Drilling of 150mm dia Bore well including Transportation from one place to another in alluvial soil sedimentary strata of clay and sand stone shale pebbles boulders etc., by taking pilot bore of 150mm dia and then enlarging to 300 mm dia direct of reverse

Reaming of 150mm dia Pilot Bore to 300mm dia Bore well upto a depth of 65metre ending below Ground level as directed by the departmental officers.

Supply and delivery of following dia P.V.C Casing Pipe and specials as per IS 12818/1992 of approved quality for Bore well

150mm dia Pvc pipe

150mm dia Slotter Pvc pipe

150mm dia Pvc end cap

Labour Charges for inserting 150mm dia P.V.C Pipes assembly ( with or without slots ) in the drilled hole including jointing P.V.C Pipes with couplers with cement paste complete and supplying and packing annular space with pebbles of good quality - to Bore Well

Charges for developing the bore well with air compressor of 600 CFM Capacity including Transportation ,Labour and fuel charges for compressor as directed by the departmental officers and conducting Yield test by' V ' Notch method all complete as directed by the departmental officers - To Bore Well

Supply, delivery, erection and commissioning of 2.0 HP motor with clear water vertical wet type deep well submersible pump set suitable for 150mm dia borewell of best approval quality with ISI Mark, IS 8034/2002 as amended thereafter and BEE 3 Star Rated capable of discharging 100LPM against 30m head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass shall be directly coupled to a continuous rated two pole suitable wet type vertical squirrel cage induction motor as per IS 9283/1995 as amended there after, suitable for operation in AC three phase 415 V +/-10%, 50HZ +/-5% etc., complete in all respects and as directed by the departmental officer.

Supply and delivery of direct online starter confirming to IS13947, ICE 60947-1 suitable KW rating for operation in AC/ three Phase/50HZ(+/5%) and 415V (+/- 10%) including Ammeter, Overload relay, under Voltage release with no Volt coil, Air Break contactors suitable for next Standard higher KW rating, Single phase preventor, dry running preventor and On/ Off Push button switches, including the capacitor of best approved quality including cost of Materials, Labour Charges etc., Complete in all respects and as directed by the departmental officers.

Supplying and laying of PVC insulated and sheathed 4 Core Flat type 16 Sq.mm Copper Cable Confirming to IS 694 / 1990 with ISI mark for 3 phase submerisible pump set including labour charges for laying cables below ground level including earth work excavation and refilling charges, cost of all material Labour charges etc., complete in all respects and as directed by the departmental officers.

Supplying and laying of L.T. Cables 4 Core 1.1 KV Grade Armoured Aluminium Conductor cable confirming to IS 1554 part I with ISI mark 16 Sqmm cable below ground level including earth work excavation and refilling charges, cost of all material Labour charges etc., complete in all respect and as directed by the departmental officers.

Supply and laying of all materials and termination of 4 core 16 Sq.mm AYWY/A2XY/AYFY aluminium LT UG cables using double compression type cadmium plated brass cable glands suitable crimped type cable lugs(copper), cable identification tags and including gland earthing using Cu conductor of adequate size.

Supplying and laying of 40mm dia HDPE pipe for submercible of 10kg/cm including laying, cutting, jointing etc.,

Nylon rope of good quality tying the motor in proper way and as directed by the departmental officers.

Supply, delivery, erection and commissioning of 5.0 HP submersible pump set best approval quality with ISI Mark, IS 8034/2002 as amended thereafter and BEE 3 Star Rated capable of discharging 250LPM against 60m head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass shall be directly coupled to a continuous rated two pole suitable wet type vertical squirrel cage induction motor as per IS 9283/1995 as amended there after, suitable for operation in AC three phase 415 V+/-10%, 50HZ +/-5% etc., complete in all respects and as directed by the departmental officer.

Supply, erection, testing and commissioning of Gun Metal Non-Return Valve of size 50mm dia including necessary MS flange of table „E‟, gaskets, bolts & nuts, etc., installed at pump house delivery line for the purpose of priming to suction line so that to control one way including conveying, fixing and incidental charges etc., complete as per standard specification and as directed by the Departmental Officers. Make: LEADER / EQUIVALENT.

Supply, Erection of 7m Free Standing Double Arm Bracket 8 sided Octogonally continously tapered structured pole with base plate of size 250 x 250 x 12mmas per IS-875 with Concreting and masonary work for fixing the post and Lantern Carriage for fixing 4 Nos Lights and SMC outdoor box for street light with Backlite connector 4 Way 63A with control by 40A 4 P MCb Isolator and with 4 Nos of 80W LED Focus Light Fitting with LED with 4 Core 2.5 Sqmm Cable for connecting the fitting with necessary connection.

Supply and laying of 4 x 10 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good

Supply and clamping of 4 x 10 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps

Supply and fixing of brass cable gland for 2 x 10 sq.mm. PVC armoured LTUG cable with earth connection

Supply and fixing of Vertical type 4 way triple pole neutral MCB distribution board with Metal/Acrylic Door cover with IP42 Protection, 40A FP MCB as incoming with,2 Nos 32A TP MCB and 6 Nos 32A SP MCbs are Outgoing on wall with angle iron frame work with earth connection only.

Supply and fixing of Vertical type 4 way triple pole neutral MCB distribution board with Metal/Acrylic Door cover with IP42 Protection, 40A FP MCB as incoming with,12 Nos 32A SP MCBS are Outgoing on wall with angle iron frame work with earth connection only.The MCB DB and MCB's should be with ISI mark.(Like Legrand /Hager L &T make)

Supply and Run of 3 Core 2.5 Sqmm Copper Cable through Duraline :HDPE 50/38mm DWC duct as per IS 16205 Part 24 concealed in wall.

Supply and fixing of Phillips Make Down light SM296C LED20S-3000 PSU WH 18W Ceiling Fitting with Anchor Fastener grouted on ceiling with Sealant Paste for fixing the Fitting with Connection

Supply and fixing of Phillips Make Down Focus light ST700T LED40 930PC PSU 1C BK MB 40W Down Focus fitting with Mounting Bracket on the ceiling.

Supply and fixing of ORBIT Make OR-PAR-160 WP has following Specs.Colour of LEDS-RGBW Lamp 54 Pieces of Colour LEDD MX 512 Control Compatible Stand Alone function, IP 65 Gradewater proof used for outdoors architectural lightings with Special effect.

Supply and fixing of DMX control cable USB RS- 485cable XLR DMX512Cable stage lighting for DMX control, freestyler Download troller cable

Supply and fixing of Pillar Box, Panel Size 3'(L)x 3'(H) x 1.5'(W) with 100Mm x 50MM x 6MM MS Base channel with High Security CAM lock with 2 Keys, with Two Chambers for fixing the Power DBS and DMX Controllers, Concrete plinth and masonry work for fixing the Pillar Box with Powder Coating.

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall/ floor/ ground for earth connection

Sub Total

Pars Engineering India Private Limited (BID ID -1210742)

M/S Annanmar Constructions (BID ID -1209236)