Renovation of Main Building, Toilet, Out House, Staff Quarter, Barrack, Badminton Court and Construction of Shed, New Toilet, Under Ground Sump and other work in Honble Chief Justice Residence at Kanke Road, Ranchi (High Court Pool)

Providing and fixing factory made Upvc glazed /wire mesh windows/doors comprising of lead free uPVC multi-chambered fame,sash and mullion/coupler (where eve required)extruded profiles having minimum wall thickness of 1.70mm for series R1 and R2 profiles and 2.10mm for series R3 and R4 profiles conforming to EN 12608 in any shape,colour and design duly reinforced with galvanized mild steel section made of required shape &size as prCPWD specification,UPVC extruded glazing beads,interlocks and inline sash adaptor ( where ever required) of appropriate dimensionEPDM gasket,hardware,SS 304 grade fasteners of miniumi 8mm dia with countersunk head,comprising of matching kpolyamide PA6 grade sleeve for fixing frameto finished wall asper IS 1367:part 1 to 14,plastic packers,plastic caps and necessary stainless steel screws etc Profile of frame,sash &mulion ( if required) shall be mitred cut and fusion welded/mechanically jointed duly

sealed at all comers,including drilling of holes for fixing hardware and drainage of water etc.After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality all compelte as per approved drawig conforming to CPWD specification and direction of E/I.section of steel reinforcemenntr and cross sections of UPVC profiles to be as per design approved by E/I. wire mesh/Glazing of plain/toughened/laminated/double glass unit with/without high performance coatings as per design requirements and conforming to IS:3548 & IS:16231 shall be paid separately.(Note-structural design proof checked from a Goverment Engineering Institure,to be provided by the manufacturer for (i)sites with basic wind speed> 45m/sec as per IS 875-part 3(ii)sites with structure height more than 20m for all wind speeds.

Two and half track three panels sliding window with two glazed & one wire mesh panels with aluminium channel for roller track,wool pile,nylon rollers with SS 304 bodyUsing R4 series with frame (64mm& above)x(45mm&above)& glazed sash (44mm &above)x(55mm&above) with zinc alloy(zamak)powder coated handle on every panel along with multi poinnt locking system(height above 1.8m)

Providing and fixing factory made Upvc glazed /wire mesh windows/doors comprising of lead free uPVC multi-chambered fame,sash and mullion/coupler (where eve required)extruded profiles having minimum wall thickness of 1.70mm for series R1 and R2 profiles and 2.10mm for series R3 and R4 profiles conforming to EN 12608 in any shape,colour and design duly reinforced with galvanized mild steel section made of required shape &size as prCPWD specification,UPVC extruded glazing beads,interlocks and inline sash adaptor ( where ever required) of appropriate dimensionEPDM gasket,hardware,SS 304 grade fasteners of miniumi 8mm dia with countersunk head,comprising of matching kpolyamide PA6 grade sleeve for fixing frameto finished wall asper IS 1367:part 1 to 14,plastic packers,plastic caps and necessary stainless steel screws etc Profile of frame,sash &mulion ( if required) shall be mitred cut and fusion welded/mechanically jointed duly

sealed at all comers,including drilling of holes for fixing hardware and drainage of water etc.After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality all compelte as per approved drawig conforming to CPWD specification and direction of E/I.section of steel reinforcemenntr and cross sections of UPVC profiles to be as per design approved by E/I. wire mesh/Glazing of plain/toughened/laminated/double glass unit with/without high performance coatings as per design requirements and conforming to IS:3548 & IS:16231 shall be paid separately.(Note-structural design proof checked from a Goverment Engineering Institure,to be provided by the manufacturer for (i)sites with basic wind speed> 45m/sec as per IS 875-part 3(ii)sites with structure height more than 20m for all wind speeds.

Casement door sigle panel with zinc alloy(zamak)3D hinges,Multi point locking system with clyinder,zinc alloy(zamak) powder coated handles on both sides.Using R4 series with frame(64mm & above)x(55mm&above)&sash(64mm&above)x(100mm & above)(Height above 2.5metre)

Providing & fixing glass panes with putty and glazing clips in steel doors,windows,clerestory windows all complete with: 5.50mm thick glass panes.

Providing &Applying high quality acrylic modified resin based texture of Dholpur/Red sand stone patter with anti algae and Uv resistace properties to be aapplied as intermediate fiish in desired pattern @ 43.04 kg/s10 sqm to form film of 1-1.5mm thickess after scrapping and propperly cleaning the surace to remove loose particles from the plaster surface,followed by top coating with premium acrylic smooth exterior paint with silicone additives of required shade by two or more cots @ 1.43 litre/10sqm,complete as the direction of E/I.

roviding and laying vitrified tiles in floor in different sizes(Thickness to be specified by the manufacture) with water absorption’s less than 0.08% and conforming to IS:15622 of approved brand & Manufacturer in all colours and shades,laid on20mm thick cement mortar 1:4(1cement:4 coarse sand)jointing wth grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., The tiles must be cut with the zero chipping diamond cutter only.Laying of tiles will be done with the notch trowel,plier,wedge,clips of required thickness,leveling system and rubber mallet for placing the tiles gently and easily.Glsazed viterified floor tiles Polished finish of size (size 600x600mm)

roviding and laying vitrified tiles in floor in different sizes(Thickness to be specified by the manufacture) with water absorption’s less than 0.08% and conforming to IS:15622 of approved brand & Manufacturer in all colours and shades,laid on20mm thick cement mortar 1:4(1cement:4 coarse sand)jointing wth grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., The tiles must be cut with the zero chipping diamond cutter only.Laying of tiles will be done with the notch trowel,plier,wedge,clips of required thickness,leveling system and rubber mallet for placing the tiles gently and easily.Glsazed viterified floor tiles Polished finish of size (size 600x1200mm)