Upgradation / Completion of balance work of Community Hall near Shiv Mandir Opposite Church lane, Gandhi Nagar in Ward No. 21

Amount

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge:1:4:8 or leaner mix (i/c equivalent design mix)

Removal of Excavated mulba, dismantled unserviceable material from the site of work by MT/Animal transport or other wise including loading /unloading complete job.

Providing and laying under layer including preparation of ground 75.mm thick (Un-Compacted) layer of dry stone agg. and grouted with sand (complete job).

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering,finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for: (i) Stairs (excluding landings) except spiral staircases.

(ii) Columns, pillars, piers, abutments, posts and struts.

(iii) Lintel, beams, plinth beams, girders, bressumers and cantilevers.

(iv) Suspended floors, roofs, landings, balconies and access platforms.

(v) Edges of slabs and breaks in floors and walls Under 20 cm wide

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

12mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand)

12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand)

Flooring with marble stone of specified thickness as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including rubbing, polishing and curing complete with:Raj Nagar plain 16mm

Flooring with marble stone of specified thickness as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including rubbing, polishing and curing complete with:Raj Nagar plain 16mm including Extra for marble stone flooring in treads of steps and risers using single length up to 2.00 meter

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.In all colours, shades, except White, Ivory, Fume Red Brown

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Providing and fixing of Aluminium doors and windows/ventilator, paneled and glazed including Handle Bar, Brass lock etc., and all other allied items (Complete Job)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 (1 cement : 6 coarse sand) including extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Providing and fixing pressed steel door frames conforming to IS: 4351,manufactured from commercial mild steel sheet of 1.60mm thickness,including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.60mm pressed, mild steel welded or rigidly fixed together by mechanical means, including M.S pressed butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Fixing with adjustable lugs with split end tail to each jamb

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete.Fixed to steel windows by welding

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws 35mm including.Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured)

Providing and fixing in wall lining of specified medium density board, pre-laminated one side decorative lamination other side balancing lamination Grade I, exterior grade, with necessary fixing arrangement and screws etc. complete. 12 mm thick

Providing and fixing decorative high pressure laminated sheet of plain/wood grain in gloss/matt/suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS: 2046 Type S including cost of adhesive of approved quality 1.5mm thick

Providing and fixing bright finished brass butt hinges with necessary screws etc.complete :100x70x4 mm (ordinary type)

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. :250x10 mm

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. : 150x10 mm

Providing and fixing bright finished brass door latch with necessary screws etc. complete. :300x16x5 mm

Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

Providing and fixing bright finished brass handles with screws etc. complete : 125 mm

Providing and fixing bright finished brass handles with screws etc. complete :300 mm

Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot &double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

Providing and fixing of stainless steel doors, handles and locking mechanism Door lock as per the direction of Engineer - in - charge

Providing and fixing of Door handle Long as per the direction of Engineer - in - charge

Providing and fixing of electric fitting incl. Lights and other fittings with wiring as per the direction of Engineer-in-Charge Complete Job Switch Boards incl. Pianao Switches wiring Labour all Complete

Providing and fixing 10 W Round Ceiling lights of approved Brand as per the direction of Engineer-in-Charge Complete Job

Providing and fixing Exhaust fans with ISI marked of approved brand as per the direction of Engineer - in - charge Complete Job

Providing and fixing Ceiling fans with ISI marked of approved brand as per the direction of Engineer - in- charge Complete Job

Providing and fixing of Sleek LED Tube Lights of approved brand as per the direction of Engineer incharge complete job

Earthing with GI earth pipe 4.5 m long and 40 mm dia including accessories and providing masonry Enclosed with cover plate having locking arrangement and watering pipe etc with charcoal / Coke and salt as required

Providing and fixing of MCBS and MCB main Box for the Complete Community Hall points of approved brand as per the direction of Engineer incharge complete job

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in?charge.PN-16 pipe , 20mm OD(SDR-7.4)PN-16 pipe , 20mm OD(SDR-7.4)

( a )Providing and fixing PPR Unions PPR Union 20mm

( b )Providing and fixing PPR Unions PPR Union 25mm

Providing and fixing of PVC pipes 110 mm dia complete with all fittings excl Trenching & refilling etc integral work

Providing and fixing of PVC pipes 75 mm dia complete with all fittings excl Trenching & refilling etc integral work

Providing and fixing UPVC Bend 110mm

Providing and fixing UPVC Bend 75mm

Providing and fixing UPVC Tee 110 mm

Providing and Fixing UPVC Flow Trap 110 mm

Providing and fixing white vitreous China pedestal type Water closet (European type) with seat and lid,10 ltr low level white vitreous China flushing cistern and CP flush bend with fitting and CI bracket, 40mm flush make bend, overflow arrangement with special of standard make and mosquito proof coupling of of approved Municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C. Pan with ISI marked white solid plastic seat and lid.

Providing and fixing Water closet squatting pan(Indian type W.C pan) with 100mm sand cost iron P or S trap, 10 litre low level white P.V.C flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231 with all fittings and fixture complete including cutting and making good the walls and floors wherever required white vitreous China Orissa pattern W.C Pan of size 580 x 440mm with integral type foot rests.

Providing and fixing wash basin with C.I bracket, 15 mm dia CP brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- white vitreous China wash basin size 550x400 mm with a 15 mm CP brass single hole basin mixer

Providing of fixing PVC waste paipe for sink or wash basin including PVC waste fitting complete : flexible pipe 40 mm dia

Providing and fixing of ball valve (brass) of approved quality ,High or Low pressure ,with plastic floatscomplete 20 mm nominal bore.

providing and fixing C P Brass shower rose with 15 or 20 mm inlet of approved brand 100mm dia meter.

providing and fixing gun metal non-return valve of approved qaulity (Screwed end) Horizontal 25 mm nominal

providing and fixing 15 mm nominal bore C.P brass long nose bib cock of approved quality conforming to ISI standards and weighing not less than 810 gms.

providing and fixing 15 mm nominal bore C.P brass long body bib cock of approved quality conforming to ISI standards and weighing not less than 690 gms

Providing and fixing PTMT grating of approved quality and colour.125 mm nominal dia with 25mm waste hole

Providing and fixing uplasticized PVC connection pipe with brass unions 20 mm nominal bore

providing and fixing 600x450mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden clats with C.P brass screws and washers complete job.

providing and fixing of PTMT Towel rail complete with barckets fixed to wooden cleats with CP brass screws with consealed fitting arrangement of approved quality and colour 450mm long towel rail with total lengh of 495mm,78mm wide and effective hieght of 88mm,weighing not less than 170gm.

providing and fixing C.P brass soap dish of approved brand as per the direction of Engineer incharge complete job

providing and fitting of electric motor of 1 HP water pump /motor of make ISI marked,including fitting complete job as per the direction of Engineer incharge complete job

Supply and placing on terrace (at all floor level) polythylene water storage tank ISI 12701 marked indicating the BIS licence no. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and base support for tank( Sintex ,electroplast, star, Lotus for equivalent having valid if ISI.

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

providing and fixing of inaguration plate of size 3'-0'x2'-6'' of Granite Marble stone Black colour with carving letters (complete Job)

Carriage of material Sand and stone aggregate 20mm by MT avg.10KM

Carriage of material stone aggregate 40mm by MT avg.10KM

Carriage of Bricks by MT avg. 15KM

Provision for design, Drawing and consultancy charge complete job.

M/S RICKY LANGER GUPTA