REPAIR TO TILING, FLOORING, ROOF TREATMENT, SANITARY FITTINGS AND REPAIR/MAINTENANCE AS WELL AS IMPROVEMENT OF EXTERNAL ELECTRIC SUPPLY, STREET LIGHTS AND ALLIED WORKS AT LAO (A) OFFICE AND DAD RESIDENTIAL ACCN IN THE AREA OF AGE B/R-II UNDER GE PANA

Amount

Taking down cement plaster on brick wall including raking out joints, hacking for key, scrubbing down with water, etc and removing rubbish from the premise complete all as specified and directed.

Taking down chowkat or frame n.exc 1.5 Sqm each with shutter (without taking off shutter from the frame) complete all as specified.

Taking down chowkats exc 1.5 sqm and n.exc 4 sqm each with shutters (without taking off shutters from the chowkats or frames) complete all as specified and directed.

M&L for Non skid coloured ceramic tiles 7 to 8mm thick (squre/rectangular) area of each tile n exc 0.18 sqm in floors etc over a screed bed as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified over and including screed bed or bedding layer of CM(1:6), 15mm thick for laying floor finishes including dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable rubbish off the permises complete all as specified and directed.

M&L for Non skid coloured ceramic tiles 7 to 8mm thick (squre/rectangular) area of each tile exc 0.18 sqm but n exc 0.38 sqm in floors etc as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified, over and including screed bed or bedding layer of CM (1:6),15mm thick for laying floor finishes including dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the permises complete all as specified and directed.

M&L for glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, over and including screed bed 10mm thick in CM (1:3) including dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) rubbish off the permises complete all as specified and directed.

M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles n.exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of CM (1:6), 15mm thick for laying floor finishes including dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceble tiles to store and rubbish off the permises complete all as specified and directed.

M&L for rendering in CM (1:6), 15mm thick on fair face of brick work and finised even and smooth without using extra cement complete all as specified and directed.

M&L for rendering in CM (1:3), 10mm thick on fair face of brick work/concrete surfaces and finised even and smooth without using extra cement as in ceiling complete all as specified and directed..

M&L for rendering in CM (1:4), 15mm thick on fair face of brick work and finished even and smooth without using extra cement using with water proofing compound complete all as specified and directed. (Note: WPC shall be measured and paid separately).

M&L for complete removal of existing treatment on wall plaster surface & providing of 1.5mm thick (minimum) wall care putty & applying two coat of oil bound distampered on wall surfaces & over a coat primer complete all as specified and directed.

M&L for applyning two coats of oil bound distampered on wall surfaces & over a coat primer on new plastered surfaces including preparation complete all as specified and directed.

Preparation of new ceiling surfaces plastered surfaces and applying three coat of white washing on ceiling surfaces complete all as specified and directed.

Preparation of old ceiling surfaces plastered or unplastered and applying One coat of white washing on ceiling surfaces complete all as specified and directed.

S&F aluminium alloy anodised barrel tower bolt 150mm long complete all as specified and directed.

S&F extruded aluminium alloy handle fabricated type anodized 150mm long complete all as specified and directed.

S&F aluminium alloy anodised barrel tower bolt 150mm long complete all as specified and directed.

S&F 100 mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

S&F hydraulic door closer aluminium extruded section body desiganation No-3 universal type ,suitable door shutter width and waight between 61kg to 80kg of approved make, fixed with screws, all as specified and as directed by Engr-in -Charge.

S&F aluminum alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts of extruded such or cast aluminum alloy complete all as specified and directed.

M&L for 150 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F mortice lock, alluminium body, 4 lever, 100 mm size, vertical type with two keys in repair complete all as specified and directed.

M&L for cutting holes in brick wall exc half brick but n.exc one brick for inserting hold fast and macking good dismanteled portaion in CM (1:4) or cement concret 1:2:4, type B-I built in cm complete all as specified and directed.

S&F hold fasts inserted brick wall complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description exc 10cm in width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description exc 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old steel surfaces of any description exc 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F 100mm long hasp and staple safety type aluminum anodised with mild steel hinge pin including bolt to hinges plate and fixed in repiars with screws complete all as specified and directed.

S&F in repairs mild steel powder coated darpery curtain rod 25mm dia fixed including brackets complete all as specified and directed.

S&F in repair Bib taps, cast copper alloy with handle, chromium plated fancy type, short body with wall flange screwed down, suitable for 15 mm bore pipe complete all as specified and directed.

S&F in repair PVC valve less, syphonic action type, 10 Litres capacity flushing cistern, low level, white, with inlet, ball valve, float and handle, including bracketsand flush pipe, complete all as specified and directed.

S&F 15mm dia PVC connection 450mm long of approved make fancy type as specified and directed by Engineer-In-Charge

S&F in repair stainless steel soap dish fancy type as specified and directed by Engineer-In-Charge

S&F in repair stainless steel towel rail 20mm dia D type solid 60cm long between flanges of approved make and pattern, fixed to walls with screws complete all as specified and directed by Engineer-In-Charge

S&F vitreous china wash down water closet (Padestal pattern) white with P or S trap including plastic water closet seat & cover mild steel chromium plated or aluminised hinging device and jet, fushing cistern low or high level, 32mm dia polyethylene fush pipe etc complete all as specified and directed (excluding cost of flush tank).

S&F polycarbonite sheet cabinet with openable shutter and mirror with size of 450mm x 350mm x 120mm with thickness of mirror not less than 2mm, fixed to wall in repairs complete all as specified and directed. ( Make : PRAYAG or equivalent as approved by GE)

S&F concealed stop valve,/anglevalve cast copper alloy, screwed down, high pressure with handle, chromium plated, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe,in repair complete all as specified and directed.

Taking up or down steel tubing 15 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

S&F tubes 15 mm bore, ‘medium grade’, galvanized with all fittings and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

All as per item No 42.00 mentioned here-in-above but 75mm dia complete all as specified and directed.

S&F PVC bends 110mm dia long (any radius) dismantling pieces of tapers large bore measures fited with oval access door complete all as specified and directed.

S&F PVC bend 75 mm dia complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames glazed with putty or fixed with beads complete all as specified and directed.

M&L for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50X100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardan and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (Note: (i) M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately. (ii) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made)

S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative panelled decorative flush door shutter one side plain on other side of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

S&F 30mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F 4.0mm thick glass sheet ordinary quality and glazing with oil putty fixed with beads n.exc 0.5 Sqm in each pane complete all as specified and directed.

S&F solid PVC door frame of size 50mmX47mm made out of 5mm plain colour PVC foam sheet meter cut to two corner and jointed with 2 nos of 1500mm long bracket of 15x15 squre tube .the two vertical door profile are to be reinforced with 19x19mm squre tube of 19 gauge EPDM rubber gascut weather seal to be provided through out the frame frame shall be fixed to wall using 65x100mm long ms screw through the frame by using PVC fasterner (inc hold fast)and minium of 4 nos of screw to be provided for each vertical member & 2 nos for horzintal all as specified as per drawing.

S&F factory made solid PVC moulded door shutter with particle board core 28 to 30 mm thick (stiles) with 2,4 or 6 raised paneel design with 2mm thick moulded PVC sheet on the front face and 2mm plain colour PVCsheet on back face and moulded plain colour PVC 'c' chanel having PV C sheet for top rail ,lock rail & bottom rail panneling, supply and fixing in the frame at site as per specification

S&F powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge complete all as specified.

S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-Charge

S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-Charge

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing rubbish off from the premises complete all as specified and directed

M&L for brick work with fly ash bricks straight or curved on plan exc 6m mean radius,built in cement mortar (1:6) all as specified old size bricks complete all as specified and directed

M&L for complete removal of existing treatment by mechanically and manually where the mechane can not reach and wasing down the with water and applying exterior wall care putty to have uniform smooth surface applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as directed by Engineer-in-Charge

Dismantling of wall or ceilling board of any thickness complete all as specified and directed

S&F 605mmx605mm anodised aluminium snap grid frame work for false ceillingwith all necessary aluminium angle & Tee arrangement with and incl fixing cleats screw etc complete all as specified and directed

S&F Hanger 6mm dia G.I (up to 1200mm length) adjusting level fixed to roof by means of ceilling cleats made out of G.I flat 40x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm longcomplete all as specified and directed

S&F 6mm thick 'E' board (non asbestos fiber) designer building boards fixed in aluminium frame work in ceilling flat or sloping with screw complete all as specified and directed

Demolition of Plain cement concrete below or above ground level n.exc 15 cm thickness and removal of rubbish to outside MD land as directed by Engr-in-Charge

M&L for PCC 50mm thick type B-1, 1:2:4 (using 20mm graded stone aggregate) as in sub base of floor with nominal reinforcement complete all as specified and directed. (Note: Reinforcement shall be measured and paid separately).

M&L for Mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for PCC 25mm thick type B-0, (using 12.5 mm graded stone aggregate) as in floor finish complete all as specified and directed.

M&L for cement concret type C-1, 1:3:6 (using 20mm graded stone aggregate) as per plinth protection 75mm thick concrete surface without using extra cement complete all as specified and directed.

S&F plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

M&L for PCC, type B-1, 1:2:4 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in item 04028, water troughs and the like lincluding weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L for Pre-painted galvalume aluminium zinc coating @ 150 GSM GI based plain sheet 0.50 mm thick any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws, complete all as specified and directed.

M&L for along the external wall below concrete or masonry apron using chemical emulsion as post construction ATT @ 2.25 litres as per linear metre including drilling and plugging holes etc in apron complete all as specified and directed.

M&L for providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and directed.

M&L for treatment of soil under existing floors using emulsion as post constuction ATT @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with CM (1:2) (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed.

S&F prelaminated particle board 18 mm thick, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work.complete all as specified and directed.

M&L for applying two coats of epoxy based two component binder to bind old to new concrete checmical bond as per manufacture's instructions and procedures complete all as specified and directed

M&L for welding mild steel wire mesh weighing not less than 1 Kg/Sqm and primed with Nitco Zinc primer, fixing to the prepared concrete surface through proper fixing arrangements and applying 40mm thick average cement mortar with guniting machine/shotgun at a pressure not less than 4 Kg/Sqm in ratio 1:2 mixed with liquid water proofing compound chemical not less than 5% by weight of cement including lapping of new reinforcement to the rusted portion all as per manufacture's instructions and carried out the work as per procedures complete all as specified and directed

M&L for providing and filling epoxy putty into RCC/PCC/Stone masonry crack after opening up RCC/PCC/Stone masonry cracks in V- groove manner approximate 10mm wide and 10mm deep using mechanical cutter, properly cleaning the same to remove loose dust, dirt etc and finishing in line and level with existing concrete/masonry surface etc complete all as per manufacture's instructions and procedures complete all as specified and directed.

M&L for roughening/cleaning surfaces of roof with wire brush, sweeping clean and washing down with water to remove dust etc complete all as specified and directed.

M&L for brushing neat cement slurry @ 3KG of cement per Sqm mixed with water proofing compound complete all as specified and directed

M&L for cement concrete 25mm thick, type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) in paddng for levelling course of roof, rounded or chamfer edge sloping, coving all around at the junction of parapet and the roof slab etc including 10mm thick rendering in CM (1:4) over concrete surface whilest green concrete mixed with water proofing compound complete all as specified and directed. (Note: WPC shall be measured and paid seperately)

Supply only water proofing compound complete all as specified and directed (Make : Pidilite Industries/ Impermo/Snowcem India Ltd/Sika)

M&L for preparation new surfaces or roof and apply two coats of polyurethene (PU) acrylic based water proofing liquid compound over & including one coat of self priming @ one litre over 10 sqm with reinforcing fabric sheet as per manufactures instruction to stop leakage/ seepage from roof/ wall complete all as specified and directed by the Engineer-in-charge. (Note:- (i) As per description of these item minimum two coats of Polyurethene (PU) acrylic based water proofing liquid compound over one coat of primer shall be carried out by as per manufacturer instruction. Please note no price asjustment shall be made, if as per manufacturer instructions more coats of polyurethene )PU) acrylic based water proofing liquid compound & primer are required for roof treatment. (ii) Quoted rate shall be deemed to be included for work in buiding/ structure of any height).

EM PORTIONS Taking down carefully aluminium conductor point wiring (light,fan,socket or power) complete including fittings such as switches,ceiling roses, pendants, regulators ,sockets etc. and removing (except those to be reused shall be kept in safe custody at the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing complete all as specified and directed.

M&L for point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes/ modular, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)

M&L point wiring for socket outlet 3 pin, 5 amps on Independent board controlled by one, one way switch using 2.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes/ modular, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 2.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)

All as per item No 86.00 mentioned here-in- above but 5 Amp socket on same board with other switches complete all as specified and directed.

All as per Item No 86.00 mentioned here-in- before but for one light point controlled by two -2 way switches complete all as specified and directed.

M&L for wiring for socket outlet 3 pin, 15 amps on independent Boards controlled by one, one way switch using 4.0 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes/ modular , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 4.0 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FRLSH cable earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)

M&L for point wiring for light point/ fan point one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLSH cables in and including suitable size PVC casing and caping (ISI marked) , including pressed steel terminal switch boxes/sutable for modular, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)

M&L for point wiring for socket outlet 3 pin, 5 amps on Independent board controlled by one, one way switch using 2.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC casing and caping and fittings of medium grade, including pressed steel terminal switch boxes/surface box suitable for ordinary/ modular, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 2.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)

All as per item No 91.00 mentioned here-in-above but 5 Amp socket on same board with other switches complete all as specified and directed.

All as per Item No 91.00 mentioned here-in- above but for one light point controlled by two 2 way switches complete all as specified and directed.

M&L for point wiring for one 15 Amps socket outlet on independent board controlled by one, one way switch using 4.0 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated Unsheathed FRLSH cables in and including suitable size PVC casing and caping (ISI marked) , including pressed steel terminal switch boxes/surface box suitable for ordinary/ modular,3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 4.0 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FRLSH cable as earth wire and connecting to earth dolly and brass screws, washers etc.complete all as specified and directed.

S&F switch piano flush type, single pole , 5/6 Amps, one way complete all as specified and directed.

S&F switch socket combination 2 in 1 multipurpose 5 pin , (6 Amps ) flush type controlled by one switch complete all as specified.

S&F socket outlets 2 in 1, 5/6 Amps, 230/240 V complete all as specified and directed .( For Same Board only)

S&F switch socket combination 2 in 1 , 6 pin , (16 Amps ) flush type controlled by one switch complete all as specified and directed.

S&F ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified and directed.

S&F stepped type electronic fan regulator flush type 240 Volts ISI marked complete all as specified and directed.

S&F Bell push , flush type , 5 amp complete all as specified and directed.

S&F Buzzer, Ding dong, AC 230 Volts, single pole 230 volts complete all as specified and directed.

S&F lamp holder, PVC/polycarbonate type with back plate straight or anfular suitable for batten fittings complete all as specified and directed.

S&F submain two single core, 4 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade drawing in and including suitable size PVC casing and caping (ISI marked) including 4 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified and directed. (Note: Three runs cable and PVC casing caping will be measured as a single unit)

S&F submain two single core ,6 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade drawing in and including and including suitable size PVC casing and caping (ISI marked) including 6 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified and directed. (Note: Three runs cable and PVC casing caping will be measured as a single unit)

S&F in repair 01x 18 W LED batten light fittings, with T-8 tube rode, lighting fixture with extruded polycarbonate complete with all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing complete all as specified and directed.

S&F in repair security light fittings 25 watts, minimumm lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65 including necessary connection complete suitable for pole dia 25mm complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size complete all as specified and directed

S&F in repair 18 W surface mounted round LED downlight, aesthetically designed auminium die-cast enclousers, with seperate replaceable constant current driver 12 watts for grid ceiling ,including necessary connection complete all as specified and directed.

S&F in repair 10 W LED light fitting Inverter LED batten with square profile and polycarbonate channel lithium ion battery with charging time 8-10 hours and back up time upto 4 hours 10 watt , 6500K including necessary connection complete all as specified and directed.

S&F in repair decorative wall mounting brushed nickle finish fixture with opal glass diffuser suitable with 9 watt LED lamp B22 base 2Nx9w LED lamp complete with all accessories complete all as specified and directed.

S&F in repair bracket made out of galvanized tube 25mm dia bore (light grade) 1.50 meter long, and band as required,with MS clamps,nuts and boltswith two coat of red primer and one coat of sliver paint complete all as specified and directed.

S&F in repairs epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as specified and directed.

S&F in repairs epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Vertical Triple pole and neutral 415 V, 12 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as specified and directed.

S&F in repairs MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Voltsand to be housed in DBs including necessry connection complete all as specified and directed. (Note : Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

S&F in repairs MCB SPN 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection complete all as specified and directed. (Note : Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

S&F MCCB 4 pole, 3 phase, 415 volt of capacity 125 Amp, 16 KA complete with proper copper thimbles, copper reducer etc complete all as specified and directed.

M&L for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth wire electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth wire encased in and including 15 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion. (Note :- (i) If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department. (ii) Testing to be carried out by the contractor in presence of Engr- in- Charge , entered in the eath testing register, prepared and to be maintained by the contractor & submited to Concerned JE E/M.(iii) T&P and testing instrument(Meger) to be provided by the contractor at own cost).

S&F in repair steel body Exhaust ventilation fan of sweep 300mm after taking out the existing burnt out fan or make a suitable hole for exhaust fan and plaster a disturbed surface complete all as specified and directed by Engr-in-Charge.

M&L for checking of ceiling fans upto 1400 mm, after taking down the fan carefully and removing from site to workshop including, split pin and jam nut, rewinding of fan coil with super quality, super enameled copper wire of suitable gauge and heat vernishing and refixing the same in original position including greasing of bearings & other moving parts and replacement of split pin, jam nut & rubber bush and testing complete all as specified and directed.

M&L for checking of Exhaust fans upto 450 mm, after taking down the fan carefully and removing from site to workshop including, split pin and jam nut, rewinding of fan coil with super quality, super enameled copper wire of suitable gauge and heat vernishing and refixing the same in original position including greasing of moving parts and testing complete to make it fully funtional complete all as specified and directed.

S&F capacitor 2.5 MFD all as specified and directed by Engr - in -charge.

S&F capacitor 3.15 MFD all as specified and directed by Engr - in -charge.

M/s BISWAJIT GHOSH

ANSH CONSTRUCTION

SINGH CONSTRUCTION

BISWAS ENTERPRISE