Construction of Community Health Center with Residential Accommodation at Village Rania in Distt. Sirsa (Pdg. E.I Internal only).

Amount

Main Switches (HSR 31.12(a):- Supply and erection of metal clad switches / B.D.Bs with rag bolts on wall or on existing angle iron board / pedestal including bonding to earth and necessary connections. v) Double pole switch 32 amp. 415 Volts Cat-B.

xiv) Triple pole switch with neutral link 32 amp. 415 Volts Cat-B.

xv) Triple pole switch with neutral link 63 amp. 415 Volts Cat-B.

xvi) Triple pole switch with neutral link 100 amp. 415 Volts Cat-A.

Supply and erection of M.S. angle iron frame duly welded for housing M.S. sheet & main switches etc. on it, fixed on wall by means of suiteble size of rag bolts with cement concrete ,duly painted with three coats of approved paint including one coat of red oxide. (HSR 31.13). ii) Size 40 mm x 40 mm x 6 mm.

M.S.Sheet (HSR 31.14) i) Supply and erection of 3 mm thick mild steel sheet duly welded on existing M.S. angle iron frame for fixing the main switches etc. as required, duly painted with three coats of approved paint including one coat of red oxide.

Distrubution board with plug and socket:- Supply and erection of sheet steel enclosure 2 pole / 3 pole with earth plug and socket suitable for incorporating single pole / triple pole MCB on wall / on existing pedestal complete with necessary connections etc. (HSR 31.15). ii) S.P.N. enclosure for single pole MCB 20 amp.

Blanking sheet (HSR 31.16) i) Supply and erection of blanking sheet in existing distribution board.

Miniature Circuit Breaker and Isolator: -Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. (HSR 31.17) Miniature circuit breakers of 9 KA breaking capacity. SP MCB 6 amp. to 32 amp.

SPN MCB 6 amp. To 32 amp.

TPN MCB 6 amp. to 32 amp.

TPN MCB 40 amp. to 63 amp.

Supply and erection of Fittings and Accessories. (HSR 31.18) xi) Bakelite angle / straight button holder large size.

vii) Call bell 220 / 230 volts A.C. bakelite with double coil.

ix) Bell push flush type ( without flexible wire ) in existing sheet.

xii) Switch 5 amp. On existing sheet.

xiii) Wall socket 5 amp. On existing sheet.

xxvi) Supply and erection of hexagonal M.S. box 1.60 mm thick having each side 8 cms , 7.5 cms deep top covered with M.S. lid by means of screws including 10 mm dia 30 cm long mild steel rod made into suitable suspension hook and erected in RCC slab for erection of fan , the bottom covered with 3 mm thick bakelite sheet with suitable holes , painting etc. complete with all labour and material required to complete the job.

xxviii) Supply and erection of luminous bell indicator complete including making necessary connections and fixing the same on wall etc. to complete the job in all respect.

Pipe Laying: Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. (HSR 31.21). xxi) Heavy guage welded conduit pipe 20 mm dia 1.60 mm thickness flushed.

xxii) Heavy guage welded conduit pipe 25 mm dia 1.60 mm thickness flushed.

xxvii) Galvanized iron flexible pipe complete with socket nipples and check nuts etc. at both ends ( upto length of 1 meter.) b) Size 20 mm dia.

xxx) Supply and erection of PVC pipe of 6 kg. pressure laid 1 meter below ground level complete including digging refilling of the trench with jointing etc. a) PVC pipe 120 mm dia.

(Q) Earthing (HSR 31.22) i) Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required .

ii) Extra for using salt and charcoal / coke for pipe earth electrode as required.

xix) Supply and erection of 20 mm x 3 mm thick G.I. tape fixed with suitable G.I. staples of same size.

Under Ground Cables : Supply and erection of underground cable 1 meter below ground level covered with sand and bricks including necessary connections, digging and refilling of trenches. (HSR 31.25) xxv) 25 Sq. mm 3.5 Core Ard. Cable .

xxvii) 70 Sq. mm 3.5 Core Ard. Cable.

xl) 16 Sq. mm 4 Core Ard. Cable .

Supply and erection of underground cable ,loose in existing pipe or trenches complete with necessary connections. (HSR 31.26) xxv) 25 Sq. mm 3.5 Core Ard. Cable .

xxvii) 70 Sq. mm 3.5 Core Ard. Cable.

xl) 16 Sq. mm 4 Core Ard. Cable .

Supply and erection of suitable compression type brass cable glands for underground Cable. (HSR 31.28) ii) 10 Sqmm to 16 Sqmm Cable 2 to 4 Core .

iii) 25 Sqmm to 50 Sqmm Cable 2 to 4 Core.

iv) 70 Sqmm to 95 Sqmm Cable 3 to 3.5 Core .

Miscellaneous (HSR 31.35) i) Supply of M.S.pipe (B-Class) for suspension rod of ceiling fan including threading if required. i(a) 15 mm dia.

iii) Supply and erection of caution notice plate in three languages.

iv) Supply and erection of shock restoration chart in glass frame

vii) Supply and erection of 75 mm x75 mm x 60 mm deep M.S.box for telephone and inter-communication system including 2 pin 5 amp. socket including cost of bakelite sheet

PVC Insulated wiring in recessed conduit. Wiring in 1.5 sqmm PVC insulated copper conduct cable in 1.6 mm thick conduit pipe. (HSR 31.36) i) Fan Point b) Medium Point

c) Long Point

ii) Light Point a) Short Point

b) Medium Point

c) Long Point

iii) Twin Control Light point with 2 way, 5 amp. Single pole switch c) Long Point

vi) Call bell point including MS box of size 180mmx 60 mm deep for call bell. c) Long point

vii) 3 pin 5 amp. Plug point including earthing the 3rd pin etc. a) Short Point

b) Medium Point

c) Long point

viii) 3 pin 15 amp. Plug point with 4 amp. PVC insulated copper conductor cable including earthing the 3rd pin etc. c) Long point

S/E of of PVC unsheathed copper conductor cable single core 1100 volts grad in pipe of suitable size excluding cost and erection of pipe. (HSR 31.40). i) Cable size 1.5 sqm(3/0.81 mm)

ii) Cable size 2.5 sqm(3/1.05 mm)

iii) Cable size 4 sqm(7/0.85 mm)

iv) Cable size 6 sqm(7/1.05 mm)

v) Cable size 10 sqm(7/1.35 mm)

S/E of double door sheet steel enclosure distribution board suitable for MCBs and ELCBs recessed in wall including bonding to earth with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-Charge of the work. (HSR 31.41). ii) 8-way, SP&N (Horizontal)

iii) 12-way, SP&N (Horizontal)

v) 4-way,TP&N (Horizontal)(8+12)

vii) 12-way,TP&N (Horizontal)(8+36)

S/E of PVC conduit pipe ISI marked (Medium) recessed in wall/ ceiling etc. including cost of PVC bends, inspection box and all other material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of the work. (HSR 31.44). a) 20mm dia

Supply & erection of Socket size rotary step type Electronic regulator for A.C. ceiling fan Anchor make Delux model No. 50440 ISI / SSK make PC 561 operated on 120/280 V A.C. Supply complete including cutting of existing Bakelite sheet and making necessary connection ect upto the entire satisfaction of the Engineer-in-Charge of the work. (HSR 31.55).

Non Schedule Items S/E of M.S. box for computer made of 18 guage of size 8" x10" x 4" covered with 3 mm thick bakelite sheet white colour of ISI mark fixed by means of 4 nos .brass screws with cost of 1 No. 15 amp multi socket of ISI mark and 15 amp switch and 3 nos .5 amp multi socket with 5 amp switches of ISI mark including fixing the M.S. box in wall with cost of cement sand mixture including painting of M.S. Box and to complete the job in all respect upto the entire satisfatoin of Engineer-in- Charge of the work

Jayanti Electricals

The Sirsa Bansivat Co Operative L C Society Ltd.