Package-03- Hirisavae chattahally road Job No-197,Hyarane junction to HNP 198,TDH road to Kabballi 200,NH-75 to NH173 201and Doddapura to Heragu 202 Hassan taluk.

Amount

Clearing grass and removal of rubbish outside the periphery of the area. By Manual Means with all lead, lift and other incidental charges, as per the directions and instructions of the Engineer in Charge of work

Improvements to road from Hyarane Junction to Holenarasipura state Highway (via Hyarane- Beekanahalli-Channangihally-Ankapura-Karle Hanumanahally-Paduvalahippe) Km 25.70 to 33.48 (SH-109) in Holenarasipura taluk. (Job No-CRIF-KNT-2023-24-198)

Removal of Unserviceable Soil with Disposal -Removal of unserviceable soil including excavation, loading and but excluding replacement by suitable soil which shall be paid separately as per clause 305 including all labour, usage charges of all machinery etc., complete with all lead, lift and other incidental charges, as per the directions and instructions of the Engineer in Charge of work complete.

Improvements to road from Hyarane Junction to Holenarasipura state Highway (via Hyarane- Beekanahalli-Channangihally-Ankapura-Karle Hanumanahally-Paduvalahippe) Km 25.70 to 33.48 (SH-109) in Holenarasipura taluk. (Job No-CRIF-KNT-2023-24-198)

Tack Coat on Bituminous surfaces -Providing and applying tack coat with bitumen emulsion (RS1) using emlsuion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom & dusting by air compressor and spraying including cost of all materials, labour, usage charges of all machinery, lead, lift loading & unloading etc., complete and with all other incidental charges, as per the directions and instructions of the Engineer in Charge of work complete,

Improvements to road from Hyarane Junction to Holenarasipura state Highway (via Hyarane- Beekanahalli-Channangihally-Ankapura-Karle Hanumanahally-Paduvalahippe) Km 25.70 to 33.48 (SH-109) in Holenarasipura taluk. (Job No-CRIF-KNT-2023-24-198)

Dense Graded Bituminous Macadam Grade-II-Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates as per table 500-7 of specified grading premixed with bituminous binder VG-30 grade paving bitumen as per clause 504.3.1 complying with IS-73-2013 of specified grading, premixed with bituminous binder at 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects including cost of all materials all labour, usage charges of all machinery all lead, lifts, loading, unloading stacking transporting etc., with all other incidental charges, as per the directions and instructions of the Engineer in Charge of work complete, (Excluding cost of primer/ tack coat) 50-75 mm compacted thickness.

Improvements to road from Hyarane Junction to Holenarasipura state Highway (via Hyarane- Beekanahalli-Channangihally-Ankapura-Karle Hanumanahally-Paduvalahippe) Km 25.70 to 33.48 (SH-109) in Holenarasipura taluk. (Job No-CRIF-KNT-2023-24-198)

Bituminous Concrete Grading-II-Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates as per table 500-7 of specified grading premixed with bituminous binder VG-30 grade paving bitumen as per clause 504.3.1 complying with IS-73-2013 of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler @ 2% by weight of agregate, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects including cost of all materials all labour, usage charges of all machinery all lead, lifts, loading, unloading stacking transporting etc., with all other incidental charges, as per the directions and instructions of the Engineer in Charge of work complete, ( Excluding cost of primer/ tack coat) 30-40 mm compacted thickness

Improvements to road from Hyarane Junction to Holenarasipura state Highway (via Hyarane- Beekanahalli-Channangihally-Ankapura-Karle Hanumanahally-Paduvalahippe) Km 25.70 to 33.48 (SH-109) in Holenarasipura taluk. (Job No-CRIF-KNT-2023-24-198)

Construction of Subgrade and Earthen Shoulders- Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No.300-2 laid in layers not exceeding 250 mm thick and compacting it by mechanical means after adding water to its OMC, so as to achieve 97% compaction of maximum dry density and finish the surface to the required camber, grade and cross section etc., speading, grading by motor grador, consolidation by roller including all lead, lifts, loading, unloading, all labour, usage charges of machinery etc., with all other incidental charges, as per the directions and instructions of the Engineer in Charge of work complete. (New road formation).

Improvements to road from Hyarane Junction to Holenarasipura state Highway (via Hyarane- Beekanahalli-Channangihally-Ankapura-Karle Hanumanahally-Paduvalahippe) Km 25.70 to 33.48 (SH-109) in Holenarasipura taluk. (Job No-CRIF-KNT-2023-24-198)

Providing and fixing of Reflective Raised Pavement marker (RPM's) / Cat eyes / Road studs confirming to ASTM D4280 type - H, having reflective panels made of prismatic lens of total height of 20mm size of 130mm X 150mm and reflecting area of 13 Sq Cm with the slope of retro reflective surface The RPM's should be fixed by using two numbers of polymetric shanks using appropriate adhesive as recommended and certified by RPM manufacturer. The raised pavement marker should support a sufficient minimum load of 13635 Kg in accordance with ministry specification. The test certificates of the product and purchase lots certificate issued by the supplier should be producted at the time of billing. The RPM's shoud be got approved by the Engineer-in-charge of work before fixing at site. The cost is inclusive of all lead lift, transportation, labour, fixing in position firmly, with all other incidental charges, as per the directions and instructions of the Engineer in Charge of work - Reflectivity Warranty as per IRC : 67-2012

Improvements to road from Hyarane Junction to Holenarasipura state Highway (via Hyarane- Beekanahalli-Channangihally-Ankapura-Karle Hanumanahally-Paduvalahippe) Km 25.70 to 33.48 (SH-109) in Holenarasipura taluk. (Job No-CRIF-KNT-2023-24-198)

Project Display Board of size 1.80x1.60m and 2.8m from ground level Providing and erecting Project Display Board of size 1.80 vertical x 1.60M Horizontal made of Cold Rolled Coil Sheet 16 Guage (1.6mm thickness) sheeting strengthened by welding to MS angle of size 35x35x5 mm iron frame work on all sides, extra cross vertical angle fixed using nuts and bolts, base of the board shall be cleaned, applying red oxide and black paint by sprayer on both sides of the board and all MS iron frame works, background of the facing side of the board painted in traffic yellow, project information written in English/Kannada/Hindi, painting letters and numerals in black, fixed on a mild steel angle iron post 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level and the board 2.8M from ground level as per approved drawing including cost of all materials all labour, lead, lifts, loading, unloading transporting etc., with all other incidental charges, as per the directions and instructions of the Engineer in Charge of work complete.

Improvements to road from Hyarane Junction to Holenarasipura state Highway (via Hyarane- Beekanahalli-Channangihally-Ankapura-Karle Hanumanahally-Paduvalahippe) Km 25.70 to 33.48 (SH-109) in Holenarasipura taluk. (Job No-CRIF-KNT-2023-24-198)

Direction and Place Identification Signs with size more than 0.9 sqm size Board- Providing and erecting direction and place identification retro-reflectorised sign as per IRC :67 made of High Intensity grade sheeting lause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminum composite material sheet with overall thickness of 4 mm with area exceeding 0.9 sqm fixed over back support frame of min 40 x 40 x 5 mm MS Angle mounted on two nos. of mild steel circular pipe 65 NB, 3.2 mm thicknness and 4.5 meter total height firmly fixed to the ground by means of properly designed foundation with M 25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing, finishing neatly, including supplying to site of work, curing concrete work, cost of all materials, all labour, lead, lifts, loading, unloading transporting etc., with all other incidental charges complete. as per the direction of Engineer-In-Charge of the work.

Improvements to road from Hyarane Junction to Holenarasipura state Highway (via Hyarane- Beekanahalli-Channangihally-Ankapura-Karle Hanumanahally-Paduvalahippe) Km 25.70 to 33.48 (SH-109) in Holenarasipura taluk. (Job No-CRIF-KNT-2023-24-198)

Retro-Reflectorised Traffic Signs- Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of Class-C Type XI retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 801.3, 4mm thick Aluminium composite material sheet including lettering depending on the size of the sign fixed over back support frame of min 25 x 25 x 3mm Angle mounted on a mild steel circular pipe 65 NB 3.60mtrs high (min effective height 1.90 mtrs),3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67, including curing, cost of all materials all labour, lead, lifts, loading, unloading transporting etc., with all other incidental charges, as per the directions and instructions of the Engineer in Charge of work complete. B-(ii) 90 cm equilateral triangle

Improvements to road from Hyarane Junction to Holenarasipura state Highway (via Hyarane- Beekanahalli-Channangihally-Ankapura-Karle Hanumanahally-Paduvalahippe) Km 25.70 to 33.48 (SH-109) in Holenarasipura taluk. (Job No-CRIF-KNT-2023-24-198)

Retro-Reflectorised Traffic Signs- Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of Class-C Type XI retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 801.3, 4mm thick Aluminium composite material sheet including lettering depending on the size of the sign fixed over back support frame of min 25 x 25 x 3mm Angle mounted on a mild steel circular pipe 65 NB 3.60mtrs high (min effective height 1.90 mtrs),3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67, including curing, cost of all materials all labour, lead, lifts, loading, unloading transporting etc., with all other incidental charges, as per the directions and instructions of the Engineer in Charge of work complete. B-(viii) 60 cm circular

Improvements to road from Hyarane Junction to Holenarasipura state Highway (via Hyarane- Beekanahalli-Channangihally-Ankapura-Karle Hanumanahally-Paduvalahippe) Km 25.70 to 33.48 (SH-109) in Holenarasipura taluk. (Job No-CRIF-KNT-2023-24-198)

Road Delineators: Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide strips, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and conforming to IRC-79 and the drawings, including cost of all materials all labour, lead, lifts, loading, unloading transporting etc.,with all other incidental charges, as per the directions and instructions of the Engineer in Charge of work complete.

Improvements to road from Hyarane Junction to Holenarasipura state Highway (via Hyarane- Beekanahalli-Channangihally-Ankapura-Karle Hanumanahally-Paduvalahippe) Km 25.70 to 33.48 (SH-109) in Holenarasipura taluk. (Job No-CRIF-KNT-2023-24-198)

Dismantling of flexible pavements-Dismantling of flexible pavements and disposal of dismantled materials stacking serviceable and unserviceable materials separately. including all labour, usage charges of all machinery, lead, lift, load, unload, transportation etc., with all other incidental charges, as per the directions and instructions of the Engineer in Charge of work complete. (Dismantled material to be transported mechanically) (ii) A Bituminous courses - By Mechanical Means

Excavation in Soil using Hydraulic Excavator and Tippers with -Excavation for roadwork in soil by hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location, with all lead, lifts and including all labour, load, unloading, usage charges of all machinery etc., with all other incidental charges complete. as per the direction of Engineer-In-Charge of the work.

Excavation in Ordinary Rock using Hydraulic Excavator and Tippers with Excavation for roadway in ordinary rock with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections transporting to embankment location, within all lifts and including all labour, load, unload, usage charges of all machinery etc., complete and with all lead, lift and other incidental charges as per the direction of Engineer-In-Charge of the work.

"Granular Sub-Base with Close /Coarse Graded Material (Table:-400-1) Plant mix method":Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 including protection of edges of GSB layer, cost of all materials, labour, usage charges of all machinery, lighting, guarding, barricading, maintenance of diversion road, loading & unloading all lead, lifts etc.,with all other incidental charges, as per the directions and instructions of the Engineer in Charge of work complete with (Compacted thickness). A(ii) Grading-II Material (Close graded)

Wet Mix Macadam (Plant Mix Method)- :Providing, laying, spreading and compacting graded stone aggregate as per table 400-12 & 400-13, to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density of 98% including protection of edges of WMM layer, cost of all materials, labour, usage charges of all machinery, lighting, guarding, barricading, maintenance of diversion road, loading & unloading all lead, lifts etc., with all other incidental charges complete, with (Compacted thickness). as per the direction of Engineer-In-Charge of the work. Laying Using Grader

Prime Coat over WMM/WBM-Providing and applying primer coat with SS1 bitumen emulsion complying IS-8887 on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means. as per table-500-3, including cost of all materials, labour, usage charges of all machinery, lead, lift, loading & unloading etc., with all other incidental charges, as per the directions and instructions of the Engineer in Charge of work complete.

Tack Coat on Granular surfaces -Providing and applying tack coat with bitumen emulsion(RS1) using emulsion pressure distributor at the rate of 0.25 kg per sqm on the prepared granular surface cleaned with mechanical broom & dusting by air compressor and spraying including cost of all materials, labour, usage charges of all machinery, lead, lift, loading & unloading etc., with all other incidental charges, as per the directions and instructions of the Engineer in Charge of work complete.

Excavation for structures-Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling with approved material, including cost of all labour, material, usage charges of machinery, lead, lifts, loading, unloading transporting etc., with all other incidental charges complet as per the direction of Engineer-In-Charge of the work. I B - (i) Ordinary soil - Mechanical means - Depth up to 3 m

Supplying, fitting and placing TMT Fe 500 grade bar reinforcement in super-structure including cost of all labour, materials, usage charges of machinery, fabrication charges, straightening, cutting, bending, hooking, binding with approved quality of binding wire, after placing in position, tying, lapping and/or welding whereever required (wastages for laps, hooks shall not be measured & paid) with all lead, lifts, loading, unloading, transporting, stacking neatly, etc., With all other incidental charges complete, as per drawing & Technical specifications. as per the direction of Engineer-In-Charge of the work.

Filler joint Providing and fixing in position 20 mm thick premoulded joint filler in expansion joint for fixed ends of simply supported spans not exceeding 10 m for a horizontal movement upto 20 mm covered with sealant complete as per drawing and Technical specification, including cost of all materials all labour, fixing in position material, usage charges of machinery, lead, lifts, loading, unloading, transporting, etc., with all other incidental charges, as per the directions and instructions of the Engineer in Charge of work complete.

Drainage Spouts complete as per drawing and Technical specification, including cost of all labour, material, usage charges of machinery, lead, lifts, loading, unloading, transporting, etc., with all other incidental charges, as per the directions and instructions of the Engineer in Charge of work complete.

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications, including cost of all labour, material, usage charges of machinery, lead, lifts, loading, unloading, transporting, etc., with all other incidental charges, as per the directions and instructions of the Engineer in Charge of work complete.

Plain / Reinforced Cement Concrete in open foundation complete as per Drawing and technical specifications including form work, centering, vibrating, compacting, cost of all labour, materials, usage charges of machinery, curing, lead, lifts, loading, unloading, transporting, stacking, finishing the exposed faces neatly etc., with all other incidental charges, as per the directions and instructions of the Engineer in Charge of work complete (excluding cost of steel and fabrication charges). A-Case PCC Grade M 15 using batching plant & concrete pump.

Plain/Reinforced Cement Concrete M 20 in open foundation complete as per Drawing and technical specifications including formwork, centering, compacting, cost of all labour, materials, usage charges of machinery, curing, lead, lifts, loading, unloading, transporting, stacking, finishing the exposed faces neatly etc., with all other incidental charges, as per the directions and instructions of the Engineer in Charge of work complete (excluding cost of steel and fabrication charges) C-Case-I PCC Grade M 20 using batching plant transit mixer & concrete pump.

Furnishing & placing Reinforced/Prestressed Cement Concrete in superstructure as per Drawing and technical specifications including formwork, centering, vibrating, compacting, cost of all labour, materials, usage charges of machinery, curing, lead, lifts, loading, unloading, transporting, stacking, finishing the exposed faces neatly etc., with all other incidental charges, as per the directions and instructions of the Engineer in Charge of work complete RCC M-25 Grade Using batching plant, transit mixer and concrete pump. B (i) For solid slab super-structure-height upto 5m.

Back filling behind abutment, wing wall and return wall complete as per drawing and Technical Specification, including cost of all materials, compacted with plate compactor, all labour, material, usage charges of machinery, lead, lifts, loading, unloading, transporting, etc., complete with all other incidental charges, as per the directions and instructions of the Engineer in Charge of work complete., A Granular material

Supplying, fitting and placing TMT Fe 500 grade bar reinforcement in sub-structure including cost of all labour, materials, usage charges of machinery, fabrication charges, straightening, cutting, bending, hooking, binding with approved quality of binding wire, after placing in position, tying, lapping and/or welding whereever required (wastages for laps, hooks shall not be measured & paid) with all lead, lifts, loading, unloading, transporting, stacking neatly, etc., with all other incidental charges, complete, as per drawing & Technical specifications. as per the direction of Engineer-In-Charge of the work.

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes, including, barricading, traffic diversion as per IRC-35, cleaning the surface of dirt, dust and other foriegn matter, demarcation at site, traffuc control,cost of all materials all labour, lead, lifts, loading, unloading transporting etc., with all other incidental charges, as per the directions and instructions of the Engineer in Charge of work complete.2.5mm thick

Metal beam crash barrier :Type-A "W": metal crach barrier Providing and erecting "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road / ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2m centre to centre, 1.8m high, 1.1 m below ground/ road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to confirm to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330mm long complete as per clause 811, including cost of all materials, all labour, lead, lifts, loading, unloading transporting etc., with all other incidental charges complete. as per the directions and instructions of the Engineer in Charge of work

Retro-Reflectorised Traffic Signs- Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of Class-C Type XI retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 801.3, 4mm thick Aluminium composite material sheet including lettering depending on the size of the sign fixed over back support frame of min 25 x 25 x 3mm Angle mounted on a mild steel circular pipe 65 NB 3.60mtrs high (min effective height 1.90 mtrs), 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67, including curing, cost of all materials all labour, lead, lifts, loading, unloading transporting etc., with all other incidental charges as per the direction of Engineer-In-Charge of the work. complete. B-(xi) 60 cm x 50cm Rectangular

Kilometre Stone-Reinforced Cement Concrete M15 grade Kilometre stone of standard design as per IRC:8, fixing in position including painting & printing letters etc., including cost of all materials, all labour, lead, lift, loading, unloading, usage charges of all machinery transporting etc., with all other incidental charges as per the direction of Engineer-In-Charge of the work. complete. (Ordinary Kilometre stone precast)

Kilometre Stone-Reinforced Cement Concrete M15 grade Kilometre stone of standard design as per IRC:8, fixing in position including painting & printing letters etc., including cost of all materials, all labour, lead, lift, loading, unloading, usage charges of all machinery transporting etc., with all other incidental charges as per the direction of Engineer-In-Charge of the work. complete. (200 metre stone precast)

RAMEGOWDA H N