8959/GWL/E8 REPAIR/REPLACEMENT OF INTERNAL WIRING FOR MD ACCN UNDER GE GWALIOR

Amount

Taking down carefully existing aluminum/copper point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, ceiling fan with regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed.

Taking down submain wiring of any size & any type and in any position metalic/non metallic PVC conduit or from wooden batten complete all as specified and directed.

Taking down unserviceable Sheet metal box, Single pole and neutral encloser with top & MCB DB SPN with MCB's of any make/capacity complete all as specified and directed.

Taking down unserviceable Sheet metal box & MCB DB TPN with MCB's of any make/capacity complete all as specified and directed.

M&L for concealed point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH confirming to IS 694:2010 having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area (ISI marked with valid CML No) drawn in and including concealed non metallic rigid PVC conduit medium grade (ISI marked with valid CML No) not less than 20 mm dia with all fitting and fixing accessories and 1.5 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to common earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes/modular flush box factory made for mounting switch, regulators etc with and including 2.8 mm thick plastic laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches. sockets etc complete all as specified and directed for the following:-

One light point controlled by one switch.

One Ceiling fan point controlled by one switch.

One Exhaust fan point controlled by one switch.

One Bell/Buzzer point controlled by one way 5 Amp push button switch.

One 5 pin multipurpose socket out let 5/6 Amps on the same board with other switch.

One 3 pin/5 pin switch socket outlet, 5 Amps on independent board.

For one light point controlled by 2- two way switch.

Description all as per item No 5 here in before but point wiring with 2.5 sqmm FRLSH H confirming to IS 694:2010, multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sqmm FRLSH PVC insulated multi strand copper conductor cable as continuous earth wire complete all as specified and directed.

S&F for Modular switch 1 way 6A, 1 module complete all as specified and directed.

S&F for Socket, 6A - 2/3 pin combined 2 module, complete all as specified and directed.

S&F for Modular switch 1 way 16A, 1 module 15 Amp complete all as specified and directed.

S&F for Socket 6A/16A - 6 pin combined 2 module complete all as specified and directed.

S&F for Modular switch 2 way 6A, 1 module complete all as specified and directed.

S&F for modular bell push flush type, 5 Amps complete all as specified and directed.

S&F of buzzer Ding Dong, AC, 230 Volts, single pole complete all as specified and directed.

S&F for ceiling rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed.

S&F for Fan step regulator, 120W - 2 module 240 volts, AC 50Hz complete all as specified and directed.

S&F for Lamp holder with metal ring, PVC/Polycarbonate type with back plate suitable for batten fittings ISI Marked complete all as specified and directed.

S&F for LED 'T' Type Mirror light fitting 09/10 watt, 6500k, luminous efficiency >110lm/watt with provision of fixed in Lamp holder complete all as specified and directed.

S&F for sheet metal box Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amp complete all as specified and directed.

M&L for sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 6 Sqmm size drawn in and including non metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 25mm dia with all fittings & fixing accessories including one run single core PVC insulated unsheathed 6 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. NOTE: (i) Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface.

M&L for sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 2.5 sqmm size drawn in and including non metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 20 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 2.5 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. NOTE: (i) Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface.

M&L for sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 4 sqmm size drawn in and including non metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 25 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 4 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. NOTE: (i) Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface.

S&F in Renewal of Decorative ultra slim LED Tubelight fitting of LED with extruded polycarbonate, enviormental friendly energy efficient ready to use, 20 watt, 6500K, luminous efficiency > 100lm/watt fitting, incluing reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor for electrical connection from ceiling rose to connector of LED fitting and testing on completion complete all as specified and directed.

S&F in renewal for sheet metal enclosure double door for distribution board factory made for MCB DB load link VTPN 4 way suitable for MCCB as incomer, 100 Amp, 4 pole & Including MCCB 100 amps 4 pole 16 KA complete (when MCB's are to be used) with suitable size of busbar complete, fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification complete all as specified and directed.

S&F for TPN 63 Amp, 415V 10KA 'C' curve miniature circuit breaker (MCB) of four poles and current carrying capacity in the DB complete with connection testing and commissioning with suitable size copper lugs complete all as specified and directed.

S&F for MCB DB, sheet metal enclosures double door SPN 8 way with bus bar 240 volts 2 in 1 shutter type (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and directed.

S&F for MCB SPN 40-63 Amps, 240 volts 'C' series 10 KA, including connection with suitable size copper lugs complete all as specified and directed.

S&F for MCB SP 240 volts, 6 to 40 Amps, 'C' series 10 KA including connection with suitable size copper lugs complete all as specified and directed.

S&F in renewal of switch piano, flush button single pole one way 5 Amp complete all as specified and directed.

S&F in renewal of socket out let, multipurpose, 2 in 1, 5 pin, 5 Amp complete all as specified and directed.

S&F in renewal of switch piano, flush button single pole one way 15 Amp complete all as specified and directed.

S&F in renewal of socket out let multipurpose flush type, 2 in 1 6 Pin 5/15 amps complete all as specified and directed.

S&F in renewal of switch piano, flush button single pole two way 5 Amp complete all as specified and directed.

S&F in renewal of bell push flush type, 5 Amps complete all as specified and directed.

S&F in renewal of electronic step rotary type fan regulator of two module capacity 80 to 100 Watt, 240 volts, AC 50Hz complete all as specified and directed.

S&F in renewal of Switch Socket Combination 2 in 1, 6 Pin 5/15 amps complete all as specified and directed.

S&F in renewal of socket out let, multipurpose, 2 in 1, 5 pin, 5 Amp complete all as specified and directed.

S&F for modular plate including fixing, modular switchs, modular socket, modular regulator complete all as specified and directed.

White cover plate with frame but 2/3/4 module.

White cover plate with frame but 6/8/12 module.

Taking down old damaged modular/Non modular metal flush box with damage hylum sheet of any size and model and provising of new suitable size of modular/Non modular metal flush box with suitable size hylum sheet including refixing the old/new switch, socket, regulator and ss combination of different size complete all as specified and directed.

Om Electricals

M/s Himgiri construction

KP ELECTRICAL AND AUTOMATION

M/s Sagar Construction

BHAGIRATH CONSTRUCTION COMPANY

M/S NIRMAL SINGH DHANJAL

BEHL CONSTRUCTION CO

Jai Mahakaal Construction

Aawadh associates

SREE BABA TRADERS

M/s Shanti Enterprises

3Krishna Enterprises