CWE/HSR-43 OF 2021-22 CONVERTION OF HT OH LINE ALONGWITH CONNECTED ITEMS TO UG CABLE FOR SMOOTH FUNCTIONING OF ELECTRIC SUPPLY AND SUB STATION BUILDING INCLUDING SERVICES AT HISAR MIL STN UNDER GE HISAR

Amount

M&L for surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out from soft / loose soil and Clearing away all grass vegetation, saplings, shrubs, brushwood, undergrowth, roots, and trees not exceeding 30 cm girth (measured one metre above ground level) complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft and loose soil etc complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregates) as in foundation filling/mass concrete complete all as specified and directed.

M&L for reinforced cement concrete M-25 ( using 20 mm graded aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for reinforced cement concrete M-25 ( using 20 mm graded aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for reinforced cement concrete M-25 ( using 20 mm graded aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for reinforced cement concrete M-25 ( using 20 mm graded aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for reinforced cement concrete M-25 ( using 20 mm graded aggregate) as in Chajjas complete all as specified and directed.

M&L for formwork on rough finished flat surfaces of concrete to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions (square / rectangular) complete all as specified and directed.

M&L formwork on rough finished flat surfaces of concrete to sides and soffits of floor or roof beams, beam haunchings, girders, bressumers, lintels, cantilevers, shelves including supports, overhangs etc, also splays between floors and beams, etc.all as specified and directed.

M&L for formwork on rough finished flat surfaces of concrete to chullah hoods, chajjas, troughs and similar items including edges rough finished surfaces of concrete complete all as specified and directed.

M&L for formwork on rough finished flat surfaces of concrete of soffits of suspended slabs such as roof slab, floor slabs, landigs and similar work, not exc 200mm thick (horizontalor sloping) rough finished surfaces of concrete complete all as specified and directed.

M&L for formwork on rough finished surfaces of concrete to edge for roof slab n.exc 20cm wide with rough finished complete all as specified and directed.

M & L brick work with flyash bricks straight or curved on plan exc 6 m mean raidus built in old size bricks cm 1:4 complete all as specified and directed.

M&L brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 using old size bricks complete all as specified and directed.

M&L for 40mm thick Damp proof course in cement concrete 1:2:4, type B-0 to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.

M&L rendering 12 mm thick in CM 1:6 on fair face of brick /concrete surfaces of any description and finishing the surfaces even and smooth without using extra cement complete with complete all as specified and directed.

M&L rendering 15 mm thick in CM 1:4 with and including mixing of liquid WPC of approved make @ 200ml per bag of cement / manufacturer's instructions on brick/concrete wall surfaces of any description, and finishing the surfaces even and fair complete complete all as specified and directed.

M&L for rendering 5mm thick in CM 1:3 as in ceiling/landing etc on concrete surface finish even and smooth without using extra cement complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer of same make, colour as approved by GE over 2mm thick wall care putty complete all as specified and directed.

M&L for preparing new plastered or unplastered surface of walls and applying two coats of cement Base paint complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash on undecorated surface complete all as specified and directed.

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified. complete all as specified and directed.

Providing cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate as in roof kerbs complete all as specified and directed by Engr-in-Charge.

Spreading levelling layer n.exc 25cm with soil well ramming with watering filling under floor complete all as specified and directed by Engr-in-Charge.

M&L for hardcore (Broken stone or boulders ) of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 75mm thick PCC Type D- 2, 1:4:8 (40mm graded aggregate) as in sub base of flooring complete all as specified and directed by Engr-in-Charge.

M & L for polythene film, 50 micron thick, laid on floor complete all as specified & directed

M&L for 25mm thick (1:2:4) Type-B-0 (using 12.5mm graded crushed stone aggregate) as in sub base of flooring complete all as specified and directed by Engr-in-Chargre.

M&L for Machine cut kota stone slab flooring 18-20mm thick of size not less than 0.30 Sqm of each slab over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with and including 15mm thick screed bed or bedding in cement mortar 1:6 complete all as specified and directed. (Note : Single piece tiles will be placed on the surface of stair case tread area).

M&L for Kota stone slab 15mm thick in riser of bricks steps & riser of staircase , skirting, dado and pillar laid over cement screed and jointed with pigment to match the shade of the slab including rubbing and polishing with & including backing coat in 10mm thick CM (1:3) to receive Kota Stone complete all as specified and directed (Note : Single piece tiles will be placed on the surface of stair case riser area).

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

M&L non skid ceramic tiles coloured pattern as required of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed in CM (1:4) compete all as specified and directed.

M&L glazed ceramic coloured, designer & pattern (dark & light shade combination) tiles in 450 x 300 x 7-8 mm thick on vertical surfaces such as dado etc set and jointed in neat cement slurry and pointed in white or colour cement to match over with and including 10mm thick backing coat in CM 1:3 and d complete all as specified and directed.

M&L Granite (of any type) tiles, 18-20 mm thick machine cut laid over cement screed as in floor and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the granite stone including cutting and polishing with and including 20mm thick screed bed or bedding in cement mortar 1:6 complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing as per specifications and drawing complete all as specified and directed.

M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, hand rails, cupboards & door frame and similar work con- forming to Fe.290.Gde-E-165 with and including necessary cutting and welding complete all as specified and directed.

S&F 30mm flush door shutters, soild core construction, with block board core and plywood face panels, commercial type both sides complete all as specified and directed.

S&F factory made mild steel windows (Box Type ) with side hung shutters including glazing bars to receive glass, dovetailed or welded with and including necessary welding, reveting, tower bolt, hanlde, holdfast, hinges and steel peg stay as per Drg No. CEJZ/TD-2013/01 sheet (1/3, 2/3, 3/3) complete all as specified and directed.

S&F factory made mild steel windows (Box Type ) with side hung shutters without glazing bars but including sash bars to receive wire gauge, dovetailed or welded with and including necessary welding, reveting, tower bolt, hanlde, holdfast, hinges and steel peg stay as per Drg No. CEJZ/TD-2013/01 sheet (1/3, 2/3, 3/3) complete all as specified and directed.

S&F factory made mild Steel ventilators with top hung shutter (Box Type) to receive glass or wire guage and steel peg stay with and including necessary welding, reveting, tower bolt, hanlde, holdfast & hinges complete all as specified and directed.

M&L preparation of new or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L preparation of new or previously untreated steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples with and including complete all as specified and directed.

Supply and fixing acrylic transparent sheets 3mm thick in square / rectangular area of each pane not exc 0.5 sqm and fixed /lock with window frame by using PVC snap beeding with necessary self tapping reviting / screwing and suitable method complete all as specified and directed.

S&F figured glass 4.00 mm thick, pin head type and glazing with oil putty & necessary screwing / cliping in squares/rectangle exc 0.5 Sqm in each pane complete all as specified and as directed and directed.

S&F stainless steel butt hinges medium weight of size 100 mm fixed with stainless screws complete all as specified and directed.

S&F 250 mm long aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F 200mm size aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed.

S&F extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed.

S&F 100mm long aluminium anodized floor door stopper double legged with rubber shoe, fixed to bottom rail of door complete all as specified and directed.

M&L for 75mm thick (1:3:6) Type-C-2 (using 40mm graded crushed stone aggregate) as in plinth protection or paving with and including finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

S&F 15 mm dia steel water GI tube medium grade with all fittings / connections & MS clamps / clips and necessary screwing as reqd and fixed with or without concealed to walls & surface of roof slab with and including making good to required surfaces by using white cement complete all as specified and directed.

S&F 20 mm dia steel water GI tube medium grade with all fittings / connections & MS clamps / clips and necessary screwing as reqd and fixed with or without concealed to walls, ceilings or laid in floors complete all as specified and directed.

S&F vitreous China, squatting pan, Orissa Pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with PTMT trap of suitable size ( P or S type) including connection to trap and to flushing pipe, anti syphonic pipe etc complete including provision of lime concrete bedding & making good to floor complete complete all as specified and directed.

S&F 10 Ltr capacity PVC valveless syphonic action type flushing cistern low level white, with inlet, ball valve, float and handle including PVC flush pipe and brackets complete fixed in wall and floor to trap of WC as reqd complete all as specified and directed.

S&F Vitrous china wash hand basin, oval shape counter top of size 550 x 400 mm white fixed to RCC counter with and, 32mm dia PTMT waste coupling and 32mm dia PVC waste pipe 90cm long etc inlet and outlet connection complete all as specified and directed.

S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe with and including suitable size CP coupling, waste pipe & Fixing Accessories with and including CP urinal spreader, half turn CP angle valve, suitable size of PVC connection and Agromech round urinal complete all as specified and directed

S&F 15 mm bib tap chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F chromimum plated pillar taps with capstan head (but fancy type) screwed down high pressure with or without lettered Hot or cold with long screwed shank and fly nuts screwed for iron pipe and fixed complete all as specified and directed.

S&F brass Chromium plated shower roses of size 125mm with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S&F 15mm dia CP angle valves complete all as specified and directed by Engr-in-Charge.

S&F 20mm dia Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F 15mm dia Stop valves fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F 15 mm dia PVC connections, 450 mm long with PTMT nuts of suitable size at two end complete all as specified and directed.

S&F single/multi PVC (SWR) floor trap 75mm dia, palin with grating including joining to waster pipe, fixed in cement concrete type B-1 (1:2:4) using 20mm graded broken stone aggregate co,mplete all as specified and directed.

S&F towel rail 600 mm long of PTMT fixed with and incl Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190 gms).

S&F rotational moulded polythene water storage tank 1000 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed.

S&F 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete, all as specified and directed.

S&F Nipple suitable for HDPE water tank. (20mm dia) (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms) complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls or laid in trenches with necessary MS clamps complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls or laid in trenches with necessary MS clamps complete all as specified and directed.

S&F 110 mm PVC (SWR) access door bends any radius complete all as specified and directed.

S&F 75 mm PVC (SWR) access door bends any radius complete all as specified and directed.

S&F 110mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed.

S&F 110mm PVC PVC (SWR) vent cowl complete all as specified and directed.

S&F soap dish, PTMT complete all as specified and directed.

S&F CP peg set 6. complete all as specified and directed by Engr-in-Charge.

M&L for returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated soil and rubbish materials to a distance exc. 250 m but n exc. 500 m and depositing where directed at level not exceeding 1.5 metre above the starting point complete all as specified and directed.

S&F TMT bars 10 mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) complete all as specified and diirected.

S&F TMT bars 06mm dia to 08mm dia in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) all as specified and directed.

S&F TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns & beam, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) all as specified and directed.

S&F Steel rolling shutters 1.25mm thickness of laths ( gear operated type with bevel gear box and crank handle, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and diirected.

S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.

S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

Supply and fixing acrylic transparent sheets 5mm thick in square / rectangular area complete all as specified and directed.

Point wiring with 1.5 sq mm, single core ,PVC insulated but unsheathed, FRLS cable, 1100 volts grade IS -694 marked, with multistandard copper conductors and earth continuity wire with similar 1.5 Sq mm cable (incl connecting to earth dolly) drawn through and incl cutting chasing in wall and incl rigid PVC conduit and conduit accessories / fittings, fixed / laid concealed in walls and surface on ceilings and also incl sunk type pressed steel terminal box and 3 mm thick plastic laminated sheet top covers for the One light point controlled by one nos, one way switch

Point wiring with 1.5 sq mm, single core ,PVC insulated but unsheathed, FRLS cable, 1100 volts grade IS -694 marked, with multistandard copper conductors and earth continuity wire with similar 1.5 Sq mm cable (incl connecting to earth dolly) drawn through and incl cutting chasing in wall and incl rigid PVC conduit and conduit accessories / fittings, fixed / laid concealed in walls and surface on ceilings and also incl sunk type pressed steel terminal box and 3 mm thick plastic laminated sheet top covers for the One ceiling fan/Ext Fan point controlled by one way switch

Point wiring with 1.5 sq mm, single core ,PVC insulated but unsheathed, FRLS cable, 1100 volts grade IS -694 marked, with multistandard copper conductors and earth continuity wire with similar 1.5 Sq mm cable (incl connecting to earth dolly) drawn through and incl cutting chasing in wall and incl rigid PVC conduit and conduit accessories / fittings, fixed / laid concealed in walls and surface on ceilings and also incl sunk type pressed steel terminal box and 3 mm thick plastic laminated sheet top covers for the One three pin 5 Amp socket outlet point on indep board controlled by one nos, one way switch on indep bd

Point wiring with 1.5 sq mm, single core ,PVC insulated but unsheathed, FRLS cable, 1100 volts grade IS -694 marked, with multistandard copper conductors and earth continuity wire with similar 1.5 Sq mm cable (incl connecting to earth dolly) drawn through and incl cutting chasing in wall and incl rigid PVC conduit and conduit accessories / fittings, fixed / laid concealed in walls and surface on ceilings and also incl sunk type pressed steel terminal box and 3 mm thick plastic laminated sheet top covers for the One three pin 5 Amp socket outlet point on same board controlled by one nos, one way switch on same bd

All as per item No 95 above but point wiring with 2.5 sq mm single core FRLS cables and earth continuity wire with 2.5 Sq mm single core cable for one 3 pin 15 Amps socket out let point controlled by one nos, one way switch on independent board complete all as specified and directed.

Supply and fix switch piano type 230/250 volts grade on top covers Single pole one way 5/6 Amp rating

Supply and fix switch piano type 230/250 volts grade on top covers Single pole one way 15/16 Amp rating

Supply and fix socket outlet multipurpose type 230/250 volts grade on top covers 3 Pin5 Amp( with 2 pin outlet also)

Supply and fix socket outlet multipurpose type 230/250 volts grade on top covers 3 pin 15 Amp ( with 3 pin 5Amp outlet also)

S&F of ceiling rose, three terminals 230/250 V grade compete all as specified and directed.

S&F factory made epoxy polyester powder coated distribution board SP & N 12 way fabricated from minimum 1.6 mm thick CRCA sheet with metal double door (IP-43 protection ) fixed flush to wall and suitable for universal mounting and including 100 Amps bus bar, Neutral bar, standard DIN rail, eath bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and outgoings MCBs complete all as specified and conforming to IS: 8623 alongwith cable end box for above DB all as specified and directed. NOTE (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

S&F MCB SP & N 63 Amps, 240 V, 50 Hz AC complete all as specified directed.

S&F MCB SP 6 to 32 Amps, 240 V, 50 Hz AC complete all as specified directed.

S&F metallic exhaust fan of 380mm sweep heavy duty double ball bearing 1400 RPM suitable for single phase 230 volt 50 Hz AC supply incl cutting the hole compete all as specified and directed.

S&F metallic ventilating of 230mm sweep heavy duty double ball bearing 900 RPM suitable for single phase 230 volt 50 Hz AC supply incl cutting the hole compete all as specified and directed.

S&F ceiling fan 1200 mm sweep single phase 230 volt 50 Hz AC supply complete all as specified and directed.

S&F aesthetically designed LED security light luminiareis of 35 watts system wattage for energy saving having IP 66 degree of protection,with minimum system efficiency as>85%,made of pressure die casting aluminum housing power coated in graphite grey and heat resistant toughened glass with excellent thermal management LED shold have lens optics and vandal proof prismatic poly carbonate covers for ensuring efficient optics and uniform distribution of light Fitting should have operating voltage range of 120-270 VAC,THD<10%,P.F>.95 The fitting should have in built surge protector of 5 KV and CRI>70 with CCT 5700 K complete all as specified and directed.

S&F LED tube light 20 Watt which offers high lumen output with excellent energy saving and maintenance free operation higher illumination complete all as specified and directed.

S&F Suspended architectural LED luminaire provides soft-light and glare free symmetrical illumination LED tube light 40 Watt which offers high lumen output with excellent energy saving and maintenance free operation higher illumination complete all as specified and directed. Cat part no-CONSTA 1144LP40WLED830SPCWH Make- Havells or equivalent.

M&L ceiling fan regulator electronic step type suitable for 1200mm ceiling fan complete all as specified.

Supply, laying, testing and commissioning XLPE insulated armoured heavy duty electric cable of size 10 sqmm 2 core with aluminium conductor cable 1100 volts grade in trenches ducts, pipe on walls, poles of following sizes complete all as specified and directed.

M&L well burnt bricks sub class 'B' as in protection of cable laid dry, flat abutting each other width wise completed all as specified and directed

M&L for sand cushioning to PVC cable with using clean dry and natural river sand gently punning below/around cable completed all as specified and directed.

S&F metallic down rod of length 3 meter long suitable for hanging of 1200mm ceiling fan complete all as specified and directed.

M&L for plate earthing complete with galvanized mild steel plate electrode 60 cm x 60 cm x 6.3 mm thick buried directly in ground vertically (in earth pit not less than 2.25 metre deep below ground level) with the top edge of earth plate at a depth not less than 1.5 metre below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and including GI earth wire 4 mm dia bolted (with GI nuts, bolts & check nuts) and rivetted to earth (Plate) electrode at one end and connected to main switch board / DB at the other, earth wire protected by and incl GI pipe 15 mm dia (medium grade) from top of electrode to main switch board and also incl watering pipe GI pipe (medium grade) 20 mm bore from bottom of earth pit to top of electrode complete with earth pit in PCC 1:2:4 type B0 using 12 mm graded crushed stone aggregate, RCC cover etc all as shown on electrical plate No 3 of SSR - 2009 Part I.

M&L Reinforced concrete drain pipe 150mm dia, class NP3, laid and jointed complete with collars complete all as specified and directed by Engr-in-Charge.

M&L for PCC 1:3:6 type C2 (usiing 40mm graded stone aggregates) in surface channels and drains complete all as specified and directed by Engr-n-Charge.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms , moulds, mitred/stopped ends etc complete all as specified and directed by Engr-in-Charge.

M&L for finishing top of cement concrete surface even and smooth using extra cement complete all as specified and directed by Engr-in-Charge.

M&L rendering 15 mm thick in CM 1:3 on brick/concrete wall surfaces of any description, and finishing the surfaces even and smooth without using extra cement with WPC @ 3% by weight of cement or as per manufacturer instructions complete all as specified and directed. Note :- Water proofing compound (WPC) shall be measured and paid separately.

Supply only integral water proofing compound conforming to IS-2465-1975 @ complete all as specified and directed.

M&L for precast RCC 1:2:4 Type-B1 (using 20mm graded crushed stone aggregate) as in manhole / drain cover slab and similar article with plain faces, set in cement 1:4 incl formwork complete all as specified and directed by Engr-in-Charge.

M&L reinforced cement concrete 1:2:4 type B-1 ( using 20 mm graded aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engr-in-Charge.

S&F for MS framed work (angle) such as fixed with FI lugs & embeded in RCC slab complete all as specified and directed by Engr-in-Charge.

M&L for preparing surfaces of small articles of steel such as rungs and handles and treated with tar or coal tar black paint area not exc 0.10 sq.m each complete all as specified and directed by Engr-in-Charge.

M&L PCC 1:2:4 type B0 (12.5mm graded stone aggregate ) as in coping and bed blcoks etc including necessary form work complete all as specified and directed by Engr-in-Charge.

M&L for Machine pressed precast concrete interlocking paver block any shape and size (with grey cement and pigment) confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade with and including 25mm thick (average thickness) sand cushioning complete all as specified and directed.

M&L for PCC 1:2:4 Type: B-1 (using 20mm stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed by Engr-in-Charge.

S&F 25 mm dia steel water GI tube medium grade with all fittings / connections laid in trenches complete all as specified and directed.

S&F 25mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

M/S RAJESH KUMAR & SONS