REPAIRS TO STEEL FURNITURE AT AIR FORCE STATION PATHANKOT, JANDWAL AND DALHOUSIE UNDER GE AIR FORCE PATHANKOT

Amount

ALMIRAH STEEL LARGE WITH SHELVES (Drawing No FD-67(M), FD-243 & FD-1031):- Taking out worn out unserviceable Handle without damaging the adjacent parts of almirah. Supply & fixing new chromium plated steel handle 120 mm long/as exixting of approved quality complete all as specified by GE/Engr-in-charge

All as per item No 1.00 above but taking down unserviceable Lock without damaging the adjacent parts of almirah and supply & fixing new 50mm Brass lock four levers/as existing approved by GE (including duplicate keys) of suitable size of almirah steel large complete all as specified by GE/Engr-in-charge.

All as per item No 1.00 above but taking out worn unserviceable broken Leg from Almirah steel large and supply & fixing by reviting new leg made out of MS sheet 1mm thick of suitable size including applying one coat of superior quality of OG/Steel grey synthetic enamel paint over a coat of red oxide primer with spray machine and after preparation of surface complete and rest all as per drawing.

All as per item No 1.00 above but replacement of unserviceable Hook without damaging other adjacent parts with a new hook made to shape as existing or according to drawing of best quality to be fixed in the vertical cjhannel below each shelf to maintain equal distance between the shelves as directed by GE/Engr-in-charge.

All as per item No 1.00 above but supply and fixing of new Hinges 75mm Medium grade as required/existing for Almirah large in place of old unserviceable hinges complete all as specified and directed by GE/Engr-in-Charge.

All as per item No 1.00 above but replacement of unserviceable Three way locking device complete without damaging other adjacent parts with a new three way locking device made to shape as existing or according to drawing as directed by GE/Engr-in-charge.

All as per item No 1.00 above but Supply and fixing of Shelf made up of 1mm thick MS sheet made to shape as existing or according to drawing including a coat of synthetic enamel of superior quality over a applying a coat of red oxide primer with spray machine after prepration of surface to match existing colour as directed by GE/Engineer-in-charge.

All as per item No 1.00 above but Taking out unserviceable Front shutter/Door (Left or Right) without damaging other parts and supply and fixing of front shutter complete in all respects made of 1mm thick MS steel made to shape existing or according to drawing including applying one coat of OG synthetic enamel paint over a coat of red oxide primer and after preparation of surface complete and rest all as per drawing as directed by GE/Engr-in-charge.

All as per item No 1.00 above but Supply and fixing of Cover for locking device made of 1mm thick MS sheet on the inner side of left shutter duly painted as existing/directed by GE/Engr-in-charge.

All as per item No 1.00 above but Taking out unserviceable Door lock plate without damaging other parts. Supply and fixing of Door lock plate complete MS steel made to shape existing or according to drawing as directed by GE/Engr-in-charge.

All as per item No 1.00 above but M&L for preparation of old painted iron/steel surfaces by scraping & rubbing with Abrassive paper (externally and internally) whole body including shelves, broken welding or unscrewed shelves to be refixed/screwed/welded with main frame of almirah without damaging, removing dents and scratches, if any and filing the same with paste filler and applying one coat of superior quality of OG/Steel Grey synthetic enamel paint spray machine over a coat of red oxide primer as directed by Engr-in Charge.

ALMIRAH STEEL MEDIUM OR SMALL (Drawing No FD-67M, FD-114(M), FD-115(M), FD-243, FD-1032 & FD-1034) Taking out old unserviceable Handle without damaging the adjacent parts of almirah Supply & fixing new chromium plated steel handle 120 mm long of quality approved by GE and directed by Engr-in-charge.

All as per item No 2.00 above but taking down unserviceable lock without damaging the adjacent parts of almirah. Supply & fixing new 50mm/suitable size Brass lock four levers (ISI marked)/as existingapproved by GE (including duplicate keys) of almirah steel large complete all as specified by GE/Engr-in-charge.

All as per item No 2.00 above but taking out unserviceable broken leg from Almirah steel small and supply & fixing new leg made out of MS sheet 1mm thick of suitable size including applying one coat of superior quality of OG/Steel grey synthetic enamel paint over a coat of red oxide primer with spray machine and after preparation of surface complete and rest all as per drawing.

All as per item No 2.00 above but Supply and fixing of Cover for locking device made of 1mm thick MS sheet on the inner side of left shutter duly painted as existing/directed by GE/Engr-in-charge.

All as per item No 2.00 above but taking out unservicable Hinges. Supply and fixing of new hinges 75mm long medium grade as required/existing for Almirah med after removing of old unserviceable hinges.

All as per item No 2.00 above but taking out unserviceable Three way locking device without damaging other parts. Supply and fixing of three way locking device made to shape as existing or according to drawing as directed by GE/Engr-in-charge.

All as per item No 2.00 above but Supply and fixing of Shelf made up of 1mm thick MS sheet made to shape as existing or according to drawing including a coat of synthetic enamel of superior quality over a applying a coat of red oxide primer with spray machine after prepration of surface to match existing colour as directed by GE/Engr-in-charge.

All as per item No 2.00 above but Taking out unserviceable Front shutter/Door (left or right) without damaging other parts and supply and fixing of front shutter complete in all respects made of 1mm thick MS steel made to shape existing or according to drawing including applying one coat of OG synthetic enamel paint over a coat of red oxide primer and after preparation of surface complete and rest all as per drawing as directed by GE/Engr-in-charge. Make Asian, Nerolac and Berger.

All as per item No2.00 above but replacement of unserviceable Hook without damaging other adjacent parts with a new hook made to shape as existing or according to drawing of best quality to be fixed in the vertical cjhannel below each shelf to maintain equal distance between the shelves as directed by GE/Engr-in-charge.

All as per item No 2.00 above but Taking out unserviceable Door lock plate without damaging other parts. Supply and fixing of Door lock plate complete MS steel made to shape existing or according to drawing as directed by GE/Engr-in-charge.

All as per item No 2.00 above but Preparation of old painted iron/steel surfaces by scraping and scrubing with Abrassive paper (externally and internally) whole body including shelves, broken welding or unscrewed shelves to be refixed/screwed/welded with main frame of almirah without damaging. Removing dents and scratches, if any and filing the same with paste filler. Applying one coat of superior quality of synthetic enamel paint colour OG/Steel grey with spray machine over a coat of red oxide primer as directed by Engr-in Charge.

TABLE OFFICE CLERK STEEL (Drawing No FD-84 M, FD-307, FD-381, FD-1004) :- Taking out the unserviceable table top. Supply & fixing new top of suitable size, made of 18 mm thick pre-laminated particle board bonded exterior grade , one side teakwood shade balancing white.Teakwood beading of 4 mm x 18 mm size fixed all round the top, joined at corners in Mitre joint with synthetic adhesive and panel pins and duly given a coat of high gloss french polish complete and rest all as per drawing and directed by GE/Engr-in-Charge.

All as per item No 3.00 above but removing the existing unserviceable lock from the drawer of table. Supply & fixing new brass lock 50mm/suitable size (ISI marked), four levers with duplicate keys complete and rest all as per drawing.

All as per item No 3.00 above but replacement of unserviceable drawer from table office clerk steel with new steel drawer made out of 1mm thick MS sheet duly painted one coat with synthetic enamel paint over one coat primer as directed by Engr-in-Charge and rest all as per drawing

All as per item No 3.00 above but taking out unservicable leg. Supply and fixing of legs 25 mm square tube of mild steel of 1.6mm wall thickness complete in all respect in replacement of unserviceable legs as directed by GE/Engr-in-charge.

All as per item No 3.00 above but taking out unservicable long rail. Supply and fixing of long rail 25mm square tube of mild steel of 1.6mm wall thickness complete in all respect in replacement of unserviceable long rail as directed by GE/Engr-in-charge.

All as per item No3.00 above but taking out unservicable short rail. Supply and fixing of short rail 25mm square tube of mild steel of 1.6mm wall thickness complete in all respect in replacement of unserviceable short rail as directed by GE/Engr-in-charge.

All as per item No 3.00 above but taking out unservicable stiffner. Supply and fixing of stiffner 25mm square tube of mild steel of 1.6mm wall thickness complete in all respect in replacement of unserviceable short rail as directed by GE/Engr-in-charge.

All as per item No3.00 above but taking out unservicable PVC/ hard rubber shoes. Supply and fixing of PVC shoes suitable for legs of size 25mm square tube of minimum thickness 3 mm as approved by GE/Engr-in-Charge in replacement of unserviceable shoes.

All as per item No3.00 above but preparation of old painted iron & steel surfaces (externally and internally whole body by scraping & scrubbing down with abrassive paper, removing dents and scratches, if any and filing the same with paste filler and applying a coat of

Chair Verandah (Drawing No FD-19(M), FD-256 & FD-359) Taking out unserviceable 10 mm dia round bar. S & F in repairs 10mm dia round bars 450mm long welded 75mm below the bottom of seat to the front legs in Chair varandah duly painted applying one coat of superior quality synthetic enamel paint (White) over a coat of primer all as directed by Engr-in-Charge.

All as per item No 4.00 above but removing existing unserviceable plastic cane. Recanning in mat pattern with new virgin plastic cane 4 mm wide half round white colour 0.4mm thick to the seat and back of chair verandah all as specified and as directed by Engr-in–Charge.

All as per item 4.00 but Welding of broken parts of the frame. Re-alignment of Chair Verandah to its original shape as per drawing in accordance with standard workmanship/ directed and specified by GE/Engr-in-Charge.

All as per item No 4.00 above but taking out unservicable PVC/ hard rubber shoes. Supply and fixing of PVC shoes of superior quality as approved by GE/Engr-in-charge.

All as per item No 4.00 above but M&L for preparation of old painted iron steel surfaces by scrubing and rubbing down with abrassive paper removing dents and scratches, if any. Applying paste filler to smoothen surface. Applying a coat of white synthetic enamel paint superior quality over a coat of red oxide primer complete all as specified and directed by GE/Engr-in-Charge.

CHARPOY GI PIPE WITH MNF (Drawing No FD-220) :- Taking down and removing of old unserviceable plywood from charpoy GI pipe.Supply and fixing at top new plywood BWR 12 mm thick ISI marked of quality approved by GE. Retightening and Realignment of the frame of Charpoy GI pipe in original shape after carrying out threading as per requirement of rails or legs as directed and specified by GE/Engr-in-Charge.

All as per item No. 5.00 above but Taking out unserviceable long rail. Supply and fixing of New Long rail of 32 mm dia GI pipe medium grade (ISI marked) in place of unservicable long rail complete all as specified and directed by GE/Engr-in-Charge.

All as per item No. 5.00 above but Taking out of unserviceable short rail. Supply and fixing of New short rail of 32 mm dia GI pipe medium grade in place of unservicable short rail complete all as specified and directed by GE/Engr-in-Charge.

All as per item No. 5.00 above but taking out unservicable short rail of 32 mm dia. S & F with retrieved Short rail made out of the long rail( two short rails from one long rail) vide item at Serial no 38 by cutting and threading at both ends to the required size in the frame of GI Charpoy complete all as shown in the drg and as directed by GE/Engr-in-Charge.

All as per item No. 5.00 above but taking out unservicable leg of 32 mm dia GI pipe medium grade and replacing with retrieved Leg out of the short rail of item 5(c) and 5(d) by cutting and threading at one end to be fitted in the Elbow and other end plugged by weilding 3mm thick MS sheet to the required size ; and be fitted in the frame and fixing of two clamps 25mmx 3mm (Bottom clamp shall be plugged with 3mm thick MS sheet) on each leg of GI Charpoy complete all as shown in the drg and as directed by GE/Engr-in-Charge.

All as per item No. 5.00 above but removing unserviceable elbow. Supply and fixing of 32 mm iron medium grade Elbows three ways of GI suitable for 32mm dia GI pipe medium grade for fixing long rail short rail and legs in GI Charpoy.

All as per item No.5.00 above but removing unserviceable legs. Supply and fixing of New legs of 32 mm dia GI pipe medium grade in place of unservicable legs complete all as specified and directed by GE/Engr-in-Charge.

All as per item No5.00 above but removing unserviceable check nuts. Supply and fixing of Check nuts made of 10 mm thick MS plate galvanized coating suitable for 32mm dia GI pipe medium grade for GI pipe Charpoy.

All as per item No 5.00 above but removing unserviceable Nylon Niwar. Supply and weaving/Knitting closely on the both sides Nylon Niwar made of virgin Nylon of width 50/55 mm and weight of total Niwar per Charpoy shall not be less than 2.00 Kg and as directed by GE/Engr-in-Charge.

All as per item No 5.00 above but painting of MNF with a coat of Synthetic enemal of black colour over a coat of red oxide primer for Charpoy GI as per standard workmanship as directed by GE/Engr-in-Charge.

ALMIRAH STEEL LARGE GLAZED (Drawing No FD-104(M) :- Taking out worn out unserviceable handles without damaging the adjacent parts of almirah. Supply & fixing new chromium plated steel handle 120 mm long of approved quality complete all as specified by GE/Engr-in-charge

All as per item No 6.00 above but taking down unserviceable lock without damaging the adjacent parts of almirah. Supply & fixing new Brass lock of suitable/as existing size (ISI marked) four levers approved by GE (including duplicate keys) of suitable size of almirah steel large complete all as specified by GE/Engr-in-charge.

All as per item No 6.00 above but taking out worn unserviceable broken/damaged leg from Almirah steel large glazed. Supply & fixing by reviting new leg made out of MS sheet 1mm thick of suitable size including applying one coat of superior quality of OG/Steel grey synthetic enamel paint over a coat of red oxide primer with spray machine and after preparation of surface complete and rest all as per drawing.

All as per item No 6.00 above but Taking out unserviceable Door lock plate without damaging other parts. Supply and fixing of Door lock plate complete MS steel made to shape existing or according to drawing as directed by GE/Engr-in-charge.

All as per item No 6.00 above but supply and fixing of new hinges 75mm Medium grade as required/existing for Almirah large glazed in place of old unserviceable hinges complete all as specified and directed by GE/Engr-in-Charge.

All as per item No 6.00 above but replacement of unserviceable three way locking device without damaging other adjacent parts with a new three way locking device made to shape as existing or according to drawing as directed by GE/Engr-in-charge.

All as per item No 6.00 above but Supply and fixing of shelf made up of 1mm thick MS sheet made to shape as existing or according to drawing in replacement of unservicable shelf including a coat of synthetic enamel of superior quality over a applying a coat of red oxide primer with spray machine after prepration of surface to match existing colour as directed by GE/Engineer-in-charge.

All as per item No 6.00 above but Taking out unserviceable front shutter (Left or Right) without damaging other parts and supply and fixing of front shutter complete in all respects made of 1mm thick MS steel made to shape existing or according to drawing including applying one coat of OG synthetic enamel paint over a coat of red oxide primer and after preparation of surface complete and rest all as per drawing as directed by GE/Engr-in-charge.

All as per item No6.00 above but Supply and fixing of cover for locking device made of 1mm thick MS sheet on the inner side of left shutter duly painted as existing/directed by GE/Engr-in-charge.

All as per item No 6.00 above but Supply and fixing of glass pane of 3mm thickness in the front doors alongwith rubber gasket and MS frame (if required) as existing/directed by GE/Engr-in-charge.

All as per item No 6.00 above but preparation of old painted iron/steel surfaces by scraping & rubbing with Abrassive paper (externally and internally including shelves, broken welding or unscrewed shelves to be refixed/screwed/welded with main frame of almirah without damaging, removing dents and scratches, if any and filing the same with paste filler and applying one coat of superior quality of OG/Steel grey/Royal Ivory white synthetic enamel paint spray machine over a coat of red oxide primer as directed by Engr-in Charge.

Locker Steel FD 1029 Replacement of unserviceable Hasp and staples with new MS chrome plated/ Stainless steel hasp and staple of size 100mm medium grade duly riveted at the required place in the front shutters.

All as per item No 7.00 above but taking out unservicable hinge. Supply and fixing of new hinge of 75 mm medium grade as per existing size) to the body or to the shutter as required for Locker steel after removal of old unserviceable hinges complete. all as specified by GE/Engr-in-Charge.

All as per item No 7.00 above but taking out unservicable leg of locker steel. S&F of legs made of shapes as shown in drg/existing made of mild steel sheet 1 mm thick complete all as specified by GE/Engr-in-Charge.

All as per item No 7.00 above but taking out unservicable shelf. Supply and fixing of shelf made up of 1mm thick MS sheet made to shape as existing or according to drawing including a coat of synthetic enamel of superior quality over a applying a coat of red oxide primer with spray machine after prepration of surface to match existing colour as directed by GE/Engineer-in-charge.

All as per item No7.00 above but taking out unserviceable front shuter/door without damaging other parts. Supply and fixing of front shutter complete in all respects made of 1mm thick MS steel made to shape existing or according to drawing including applying one coat of synthetic enamel paint over a coat of red oxide primer and after preparation of surface complete as directed and specified by GE/Engr-in-Charge.

All as per item No 7.00 above but taking out unserviceable 20mm dia chromium plated steel pipe including damaged sockets without damaging the adjacent parts of Locker Steel and supply & fixing 20mm dia chromium plated steel pipe of suitable length and sockets of approved quality complete all as specified by GE/Engr-in-charge

All as per item No 7.00 above but M&L for preparation of old painted iron & steel surfaces (externally and internally including shelves. Scraping & scrubbing with abrassive paper the surface of locker, removing dents and scratches if any, filing the same with paste filler and applying a coat of OG/steel grey synthetic enamel paint with spray machine over a coat of red oxide primer as directed by GE/ Engr-in Charge.

CHAIR CB STEEL WITH ARMS (Drawing No FD-75):- Removing of unserviceable seat. Supply & fixing new seat made out of teak wood first class duly canned in Godrej pattern and painted with enamel paint of superior quality black colour of suitable size and fixed with new screws complete and rest all as per drawing .

All as per item No 8.00 above but Removing of unserviceable back. Supply & fixing new back made out of teak wood first class duly canned in Godrej pattern and painted with enamel paint of superior quality black colour of suitable size and fixed with new screws complete and rest all as per drawing .

All as per item No 8.00 above but removing of unserviceable arm. Supply & fixing new arm made of Ist class teakwood of size and shape as existing and painted in black colour, fixed with new screws complete and rest all as per drawing.

All as per item No 8.00 above but S&F MS flat strip of suitable/required length, 20mm(Width)x3mm (thickness) with two holes, welded with the bottom of frame of seat of chair duly painted with one coat of OG synthetic enamel paint over a coat of red oxide primer complete and rest all as per drawing.

All as per item No 8.00 above but removing of old unserviceable hard rubber shoes of chair tubular steel with arms. Suply and fixing new PVC shoes superior quality complete as directed by GE/Engr-in-Charge.

All as per item No 8.00 above but removing of unserviceable PVC plugs of chair tubular steel with arms. Supply and fixing new PVC plugs superior quality complete as directed by GE/Engr-in-Charge.

All as per item No 8.00 above but Removing existing unserviceable plastic cane, recanning in mat pattern with new virgin plastic cane 2 mm wide half round white colour 0.4 mm thick to the seat a in chair CBA all as specified and as directed by Engr-in–Charge.

All as per item No8.00 above Removing existing unserviceable plastic cane, recanning in mat pattern with new virgin plastic cane 2 mm wide half round white colour 0.4 mm thick to the back a in chair CBA all as specified and as directed by Engr-in–Charge.

All as per item No 8.00 above but preparation of old painted iron & steel surfaces (externally and internally) by scraping & scrubbing with sand paper/abrasive paper, smoothening scratches, if any and filing the same with paste filler and applying a coat of OG Synthetic enamel paint superior quality over a coat of red oxide primer using spray machine as directed by Engineer-in Charge.

Chair CB Steel without Arms (Drawing No FD-75):- Removing of existing old unserviceable seat. Supply & fixing new seat made out of teak wood first class frame duly canned Godrej pattern and painted in black colour of suitable size and fixed with new screws complete and rest all as per drawing.

All as per item No 9.00 above but removing of unserviceable back. Supply & fixing new back made out of teak wood first class duly canned in Godrej pattern and painted with enamel paint of superior quality black colour of suitable size and fixed with new screws complete and rest all as per drawing .

All as per item No 9.00 above but MS flat strip of suitable/required length, 20mm(Width)x3mm(thickness) with two holes, welded with the bottom of frame of seat of chair duly painted with one coat of OG synthetic enamel paint over a coat of red oxide primer complete and rest all as per drawing.

All as per item No 9.00 above but Removing of old unserviceable hard rubber/pvc shoes of chair tubular steel without arms. Supply and fixing new PVC shoes superoir quality complete.

All as per item No 9.00 above but removing of unserviceable PVC plugs of chair tubular steel with arms. Supply and fixing new PVC plugs superior quality complete.

All as per item No 9.00 above but preparation of old painted iron & steel surfaces (externally and internally) by scraping & scrubbing down with abrassive paper. Removing dents and scratches, if any filing the same with paste filler and applying a coat of OG synthetic enamel paint of superior quality over a coat of red oxide primer as directed by Engineer-in Charge. .

TEAPOY VERANDAH (Drawing No FD-255, FD-383) Removing of unservicable top from teapoy verandah. Supply & fixing new top of suitable size, made of 18 mm thick pre-laminated particle board bonded exterior grade, with both sides in white shade including all around teak wood beading of 4 mm x 18 mm size fixed with synthetic adhesive and panel pins joined at corners in mitre joint in smooth finish duly given a coat of high gloss french polish. Rest all as per drawing.

All as per item No 10.00 but taking out unservicable shoes. Supply and fixing of PVC shoes superior quality in place of old unservicable shoes as approved by GE/Engr-in-charge.

All as per item No 10.00 but Re-alignment and Welding (in smooth finish) of broken parts/jionts of the frame of teapoy Verandah to its original shape. Supply and fixing 20x3 mm thick iron strip, if required as per drawing in accordance with standard workmanship/directed and specified by GE/Engr-in-Charge.

All as per item No 10.00 above but preparation of old steel surface of teapoy verandah, scrubing the old paint, de-rusting the surface. Painting with one coat of white synthetic enamel paint superior quality over a coat of red oxide primer as directed by GE/Engr-in-Charge.

Table (900mm x 600mm) with & without drawer (Drawing No FD-1007/1008) Removing of unservicable table top. Supply & fixing new table top of suitable size, made out of 18 mm thick pre-laminated particle board exterior grade, one side with teakwood shade balancing white including of 4 mm x 18 mm size fixed with synthetic adhesive and panel pins joined at corners in mitre joint in smooth finish duly given a cost of high gloss french polish and complete and rest all as per drawing.

All as per item No 11.00 above but removing of old broken drawer from existing table 3’x2’. Supply and fixing new mild steel drawer made of 1 mm thick PBI sheet duly painted with two coats of synthetic enamel paint of superior quality over a coat of red oxide primer as directed by Engr-in-Charge.

All as per item No 11.00 above but removing the existing unserviceable brass lock from the drawer of table. Supply & fixing new brass lock ISI marked, four levers with duplicate keys of quality approved by GE complete.

All as per item No 11.00 above but taking our unservicable Shoes. Supply and fixing of PVC shoes of thickness 3 mm suitable for legs of size 25mm square tube as approved by GE/Engr-in-Charge in replacement of unserviceable shoes.

All as per item No 11.00 taking our unservicable leg. Supply and fixing of leg 25mm square tube of mild steel of 1.6mm wall thickness complete in all respect in replacement of unserviceable legs as directed by GE/Engr-in-charge.

All as per item No 11.00 taking our unservicable long rail. Supply and fixing of long rail 25mm square tube of mild steel of 1.6mm wall thickness complete in all respect in replacement of unserviceable long rail as directed by GE/Engr-in-charge.

All as per item No 11.00 taking our unservicable short rail. Supply and fixing of short rail 25mm square tube of mild steel of 1.6mm wall thickness complete in all respect in replacement of unserviceable long rail as directed by GE/Engr-in-charge.

All as per item No 11.00 taking our unservicable short stiffner. Supply and fixing of short stiffner 25mm square tube of mild steel of 1.6mm wall thickness complete in all respect in replacement of unserviceable long stiffner as directed by GE/Engr-in-charge.

All as per item No 11.00 above but applying one coat of synthetic enamel paint over a coat of red oxide primer on the steel frame after preparation of surface as per standard workmanship and directed by GE/Engr-in-Charge.

Table dinning ORs Steel (FD-165). Replacement of unservicable top of the table dinning. Supply and fixing of top of table dinning with 19/18 mm thick plywood BWR of size 685mmx1900mm with aluminium sheet of 22 gauge fixed as directed and specified by GE/Engr-in-Charge.

All as per item No 12.00 above but taking our unservicable long stiffner/rail. Supply and fixing of long stiffner/rail 25mm square tube of mild steel of 1.6mm wall thickness duly painted complete in all respect in replacement of unserviceable long stiffner as directed by GE/Engr-in-charge.

All as per item No 12.00 above but taking out unservicable short stiffner/rail. Supply and fixing of short stiffner/rail 25mm square tube of mild steel of 1.6mm wall thickness complete in all respect in replacement of unserviceable short stiffner as directed by GE/Engr-in-charge.

All as per item No 12.00 above but taking out unservicable short stiffner/rail. Supply and fixing of short stiffner/rail 25mm square tube of mild steel of 1.6mm wall thickness complete in all respect in replacement of unserviceable short stiffner as directed by GE/Engr-in-charge.

All as per item No 12.00 above but taking our unservicable leg. Supply and fixing of leg 25mm square tube of mild steel of 1.6mm wall thickness complete in all respect in replacement of unserviceable legs as directed by GE/Engr-in-charge.

All as per item No 12.00 above but Preparation of old steel surface of table dinning and welding damaged joints, if any including scrubing, de-rusting the surface and painting with one coat of black synthetic enamel paint as directed by Engineer-in-Charge.

Stool revolving adjustable Steel (FD- 103M, FD-119, FD-354 & FD 1026) Taking out unservicable seat and seat cover. Supply and fixing of seat of diameter 420mm made from 6mm thickness plywood BWR duly upholstered with leatherite cover of quality approved by GE after fixing U foam of thickness 75mm of density 40 over the top of plywood seat as specified and directed by GE/Engr-in-charge.

All as per item No 13.00 above but taking out unservicable 25mm dia threaded steel bolt 255 mm. Supply and fixing of new 25mm dia threaded steel bolt 255mm as specified and directed by GE/Engr-in-charge. Rest all as per drawing

All as per item No 13.00 above but taking out unservicable shoe. Supply and fixing of PVC shoes black colour suitable for legs of size 25mm dia tube as approved by GE/Engr-in-Charge in replacement of unserviceable shoes.

All as per item No 13.00 above but preparation of old steel surface of stool revolving adjustable steel including scrubing, de-rusting the surface with abrassive paper and welding loose joints, if any. Painting with one coat of black synthetic enamel paint over a coat of red oxide primer with spray machine as specified and directed by Engineer-in-Charge.

COMPUTER STOOL ROUND BACK REST (TP) Taking out unservicable seat and seat cover. Supply and fixing of seat of diameter 420mm made from 6mm thickness plywood BWR duly upholstered with leatherite cover of quality approved by GE after fixing U foam of thickness 75mm of density 40 over the top of plywood seat as specified and directed by GE/Engr-in-charge.

All as per item No 14.00 above but taking out unservicable shoe. Supply and fixing of PVC shoes black colour suitable for legs of size 25mm dia tube as approved by GE/Engr-in-Charge in replacement of unserviceable shoes.

All as per item No 14.00 above but preparation of old steel surface of stool revolving adjustable steel including scrubing, de-rusting the surface with abrassive paper and welding loose joints, if any. Painting with one coat of black synthetic enamel paint over a coat of red oxide primer with spray machine as specified and directed by Engineer-in-Charge.

SIDE RACK WITH TRAY (FD97/FD1023) Taking out unservicable shelf. Supply and fixing of shelf made up of 1mm thick MS sheet made to shape as existing or according to drawing including a coat of synthetic enamel of superior quality over a applying a coat of red oxide primer with spray machine after prepration of surface to match existing colour as directed by GE/Engineer-in-charge.

All as per item No 15.00 above but taking out unservicable leg and Supply and fixing of leg made up angle of 40mmx40mmx3mm thick Mild steel angle according to drawing including a coat of synthetic enamel of superior quality over a applying a coat of red oxide primer with spray machine after prepration of surface to match existing colour as directed by GE/Engineer-in-charge.

All as per item No 15.00 above but preparation of steel surface of book shelf including scrubing, de-rusting the surface and welding loose joints, if any. Painting with one coat of synthetic enamel paint over a coat of red oxide primer with spray machine as specified and directed by Engineer-in-Charge.

Book shelf open large (FD-69M) : Taking out unservicable shelf and Supply and fixing of shelf made up of 1mm thick MS sheet made to shape as existing or according to drawing including a coat of synthetic enamel of superior quality over a applying a coat of red oxide primer with spray machine after prepration of surface to match existing colour as directed by GE/Engineer-in-charge.

All as per item No 16.00 above but taking out unservicable leg and Supply and fixing of leg made up angle of 40mmx40mmx3mm thick Mild steel according to drawing including a coat of synthetic enamel of superior quality over a applying a coat of red oxide primer with spray machine after prepration of surface to match existing colour as directed by GE/Engineer-in-charge.

All as per item No 16.00 above but Preparation of steel surface of book shelf , if any including scrubing, de-rusting the surface and welding loose joints. Painting with one coat of synthetic enamel paint over a coat of red oxide primer with spray machine as specified and directed by Engineer-in-Charge.

Box kit steel (FD-98) : Removing and supply and fixing of new hinges 50mm Medium grade as required for box kit steel in place of old unserviceable hinges complete all as specified and directed by GE/Engr-in-Charge.

All as per item No 17.00 above but removing of unserviceable hasp and staple. Supply and fixing of new hasp and staple of 40X2X75 Medium grade as required for box kit steel in place of old unserviceable hasp and staple complete all as specified and directed by GE/Engr-in-Charge.

All as per item No 17.00above but removing of unserviceable handle. Supply and fixing of new handle of size 125X50 Medium grade as required for box kit steel in place of old unserviceable handle complete all as specified and directed by GE/Engr-in-Charge.

All as per item No 17.00 above but removing and supply and fixing of new handle of size 100X50 Medium grade as required for box kit steel in place of old unserviceable handle complete all as specified and directed by GE/Engr-in-Charge.

All as per item No17.00 above but removing and supply and fixing of new box cover/lid made to shape as existing from PBI Sheet of 22 guage 100X50 as required for box kit steel in place of unserviceable cover/lid complete all as specified and directed by GE/Engr-in-Charge.

All as per item No 17.00 above but removing and supply and fixing of new box cover/lid made to shape as existing from PBI Sheet of 22 guage 100X50 as required for box kit steel in place of unserviceable cover/lid complete all as specified and directed by GE/Engr-in-Charge.

All as per item No 17.00 above but Preparation of steel surface of box kit steel including scrubing, de-rusting the surface and painting with one coat of black synthetic enamel paint superior quality over a coat of red oxide primer with spray machine as specified and directed by Engineer-in-Charge.

Chair Computer (FD-E6/MAP/01 or TP) Taking out/removing of unserviceable tapestry cloth/ Ieatherite from the seat and back. Supply and upholstering of the seat and back with the tapestry cloth (Acrylic/polyester/poly viscos/poly prophelene)/ Ieatherite of quality approved by GE as existing/specified and directed by GE/Engr-in-charge.

All as per item 18.00 removal of unserviceable seat. Supply and fixing of seat (510X470X60mm) with moulded poly urethane foam including upholstering of cloth of quality approved by GE as existing complete, specified and directed by GE/Engr-in-charge.

All as per item 18.00 removal of unserviceble twin wheel castors. Supply and fixing of twin wheel castors of quality approved by GE as specified and directed by GE/Engr-in-charge.

All as per item 18.00 removal of unserviceable back. Supply and fixing of back with moulded poly urethane foam including upholstering of tapestry cloth of quality approved by GE as existing complete, specified and directed by GE/Engr-in-charge.

As per item 18.00 removal of unserviceble Arm rest. Supply and fixing of Arm rest black interal skin polyurethane reinforced with MS insert. It shall be scratch and weather resistant of quality approved by GE as specified and directed by GE/Engr-in-charge.

As per item 18.00 removal of dust/dirt from the seat, back and arms using non-toxic and non-erosive disinfactant and cleansing chemicals and vaccum cleaner as specified and directed by GE/Engr-in-charge.

Form without back FD-77 & FD-1027 Replacement of unservicable seat. Supply and fixing of New seat of teakwood first class plank one piece of thickness 25mm edges well chamfered and all exposed surface french polished in high gloss finish as specified and directed by GE/Engr-in-Charge.

All as per item No 19.00 above but removing of unserviceable Black PVC shoes. Supply and fixing of Black PVC shoes suitable for legs of size 25mm square tube of minimum thickness of 3 mm as approved by GE/Engr-in-Charge in replacement of unserviceable shoes.

All as per item No 19.00 above replacement of unserviceable legs. Supply and Fixing of new legs of suitable size made from 25 mm squared tube of thickness 1.6 mm duly painted over a coat of red oxide primar after preparation of the surface with Spray machine as directed by GE/Engr-in-Charge

All as per item No 19.00 above but replacement of unserviceable stiffner. Supply and Fixing of new stiffner made to shape of suitable size made from 25 mm squared tube of thickness 1.6 mm duly painted over a coat of red oxide primar after preapration of the surface with Spray machine as directed by GE/Engr-in-Charge

All as per item No 19.00 above but preparation of old steel surface of form without back, scrubing the old paint, de-rusting the surface. Painting with Spray machine one coat of black synthetic enamel paint superior quality over a coat of red oxide primer as directed by GE/Engr-in-Charge

Form with back (FD-78) Taking out unservicable seat. Supply and fixing of new seat of suitable size of teakwood first class plank one piece of thickness 25mm edges well chamfered and french polished in high gloss finish as specified and directed by GE/Engr-in-Charge.

All as per item No 20.00 above but taking out unserviceable back. Supply and fixing of New back of suitable size of teakwood first class plank one piece of thickness 25mm edges well chamfered and french polished in high gloss finish as specified and directed by GE/Engr-in-Charge.

All as per item No20.00 above but taking out unserviceable shoes. Supply and fixing of Black PVC shoes suitable for legs of size 25mm square tube as approved by GE/Engr-in-Charge in replacement of unserviceable shoes.

All as per item No 20.00 above replacement of unserviceable long rail. Supply and Fixing of long rail of suitable size made from 25 mm squared tube of thickness 1.6 mm duly painted over a coat of red oxide primar after preapration of the surface with Spray machine as directed by GE/Engr-in-Charge

All as per item No20.00 above replacement of unserviceable stiffner. Supply and Fixing of stiffner made to shape of suitable size made from 25 mm squared tube of thickness 1.6 mm duly painted over a coat of red oxide primar after preapration of the surface with Spray machine as directed by GE/Engr-in-Charge

All as per item No20.00above but preparation of old steel surface of form with back, scrubing the old paint, de-rusting the surface and painting with spray machine one coat of black synthetic enamel paint over a coat of red oxide primer as directed by GE/Engr-in-Charge.

TABLE (900mm x 900mm) FD 1009 Removing of unservicable table top. Supply & fixing new table top of suitable size, made out of 18 mm thick pre-laminated particle board exterior grade, one side with teakwood shade balancing white including beading of 4 mm x 18 mm size fixed with synthetic adhesive and panel pins joined at corners in MITRE joint and duly given a cost of high gloss french polish and complete and rest all as per drawing.

All as per item No 21.00above but taking out unservicable Shoes. Supply and fixing of PVC shoes of thickness 3 mm suitable for legs of size 25mm square tube as approved by GE/Engr-in-Charge in replacement of unserviceable shoes.

All as per item No 21.00 taking out unservicable leg. Supply and fixing of leg 25mm square tube of mild steel of 1.6mm wall thickness complete in all respect in replacement of unserviceable legs as directed by GE/Engr-in-charge.

All as per item No21.00 taking our unservicable long/Short rail. Supply and fixing of long/Short rail 25mm square tube of mild steel of 1.6mm wall thickness complete in all respect in replacement of unserviceable long/Short rail as directed by GE/Engr-in-charge.

All as per item No21.00 above but applying one coat of synthetic enamel paint over a coat of red oxide primer on the steel frame after preparation of surface as per standard workmanship and directed by GE/Engr-in-Charge.

ALMIRAH STEEL DOUBLE SHUTTER SIZE 1985X1040X550MM (Drawing No TP/HALF HANGING HALF SHELF/ANY SORT) :- Taking out worn out unserviceable handles without damaging the adjacent parts of almirah. Supply & fixing new chromium plated steel handle 150 mm long of approved quality complete all as specified by GE/Engr-in-charge

All as per item No 22.00 above but taking down unserviceable lock without damaging the adjacent parts of almirah. Supply & fixing new Brass lock of suitable/as existing size (ISI marked) four levers approved by GE (including duplicate keys) of suitable size of almirah steel large complete all as specified by GE/Engr-in-charge.

All as per item No 22.00 above but taking out unserviceable broken/damaged leg from Almirah steel large glazed. Supply & fixing by reviting new leg made out of MS sheet 1mm thick of suitable size complete and rest all as per drawing.

All as per item No 22.00 above but taking out unserviceable hinge. Supply and fixing of new hinges 75mm Medium grade as required/existing for Almirah large glazed/half hanging half shelf in place of old unserviceable hinges complete all as specified and directed by GE/Engr-in-Charge.

All as per item No 22.00 above but taking out unserviceable three way locking device without damaging other adjacent parts.Supply and fixing a new three way locking device made to shape as existing or according to drawing as directed by GE/Engr-in-charge.

All as per item No 22.00 above but taking out unserviceable shelf. Supply and fixing of shelf made up of 1mm thick MS sheet made to shape as existing or according to drawing complete and as directed by GE/Engineer-in-charge.

All as per item No 22.00 above but Taking out unserviceable front shutter (Left or Right) without damaging other parts and supply and fixing of front shutter complete in all respects made of 1mm thick MS steel made to shape existing or according to drawing complete and rest all as per drawing as directed by GE/Engr-in-charge.

All as per item No22.00above but Supply and fixing of cover for locking device made of 1mm thick MS sheet on the inner side of left shutter duly painted as existing/directed by GE/Engr-in-charge.

All as per item No 22.00 above but Taking out unserviceable Door lock plate without damaging other parts. Supply and fixing of Door lock plate complete MS steel made to shape existing or according to drawing as directed by GE/Engr-in-charge.

All as per item No 22.00 above but preparation of old painted iron/steel surfaces by scraping & rubbing with Abrassive paper (externally and internally) including shelves, removing dents and scratches, if any and filing the same with paste filler. Welding or fixing shelf with main frame of almirah without damaging. Applying one coat of superior quality of OG/Steel grey/royal ivory white synthetic enamel paint spray machine over a coat of red oxide primer after preparation of surface as directed by Engr-in Charge.

BOOK CASE STEEL (FD-1028/FD-90) Taking out worn out unserviceable handles without damaging the adjacent parts of book case. Supply & fixing new chromium plated steel handle 100 mm long of approved quality complete all as specified by GE/Engr-in-charge

All as per item No 23.00 above but taking down unserviceable lock without damaging the adjacent parts of book case. Supply & fixing new Brass lock of suitable size four levers approved by GE (including duplicate keys) of suitable size of book case steel large complete all as specified by GE/Engr-in-charge.

All as per item No 23.00 above but taking out unserviceable guide rail of book case. Supply and fixing of new guide rail of MS of 1 mm thickness as existing. for book case in place of old unserviceable guiderail complete all as specified and directed by GE/Engr-in-Charge.

All as per item No 23.00above but taking out unserviceable shelf. Supply and fixing of shelf made up of 1mm thick MS sheet made to shape as existing or according to drawing complete as directed by GE/Engineer-in-charge.

All as per item No 23.00 above but Taking out unserviceable front shutter without damaging other parts. Supply and fixing of front shutter complete in all respects made of 1mm thick MS steel made to shape existing or according to drawing complete. Rest all as per drawing and as directed by GE/Engr-in-charge.

All as per item No 23.00 above but taking out unserviceable glass pane. Supply and fixing of glass pane of 3mm thickness in the front doors alongwith rubber gasket and MS frame (if required) as existing/directed by GE/Engr-in-charge.

All as per item No23.00 above but Adjustment of front shutters and guiderail channel for smooth opening of front shutters, supply and fixing of roller in the front shutters (if required) as existing/directed by GE/Engr-in-charge.

All as per item No 23.00 above but preparation of old painted iron/steel surfaces by scraping & rubbing with Abrassive paper (externally and internally) including shelves. Removing dents and scratches, if any and filing the same with paste filler. Welding in smooth finish of damaged joints. Applying one coat of superior quality of OG/Steel grey/royal ivory white synthetic enamel paint spray machine over a coat of red oxide primer as directed by Engr-in Charge.

CHAIR REVOLVING (ALL TYPE or TP or EXECUTIVE) Taking out/removing of unserviceable tapestry cloth/leartherite from the seat and back. Supply and upholstering of the seat and back with the tapestry cloth (Acrylic/polyester/poly viscos/poly prophelene)/leatherite of quality approved by GE as existing/specified and directed by GE/Engr-in-charge.

All as per item 24.00 removal of unserviceable seat. Supply and fixing of seat of moulded plywood 12mm thick poly urethane foam including upholstering of cloth/leatherite of quality approved by GE as existing complete, specified and directed by GE/Engr-in-charge.

All as per item 24.00 removal of unserviceable gas lift mechanism. Supply and fixing of the gas lift mechanism to its functional working status as directed and specified by the GE/Engr-in-charge.

All as per item 24.00 removal of unserviceble twin wheel castors. Supply and fixing of twin wheel castors of quality approved by GE as specified and directed by GE/Engr-in-charge.

All as per item 24.00 removal of unserviceble Arm rest. Supply and fixing of Arm rest black integral skin polyurethane reinforced with MS insert. It shall be scratch and weather resistant of quality approved by GE as specified and directed by GE/Engr-in-charge.

All as per item 24.00 removal of unserviceable back. Supply and fixing of back of moulded plywood 12mm thick with poly urethane foam including upholstering of cloth/leatherite of quality approved by GE as existing complete, specified and directed by GE/Engr-in-charge.

As per item 24.00 removal of dust/dirt from the seat, back and arms using non-toxic and non-erosive disinfectant and cleansing chemicals and vaccum cleaner as specified and directed by GE/Engr-in-charge.

Book shelf open small FD-69M : Taking out unservicable shelf. Supply and fixing of shelf made up of 1mm thick MS sheet made to shape as existing or according to drawing complete as directed by GE/Engineer-in-charge.

All as per item No 25.00 above but taking out unservicable leg. Supply and fixing of leg made up angle of 40mmx40mmx3mm thick Mild steel according to drawing complete as directed by GE/Engineer-in-charge.

All as per item No 25.00 above but Preparation of steel surface of book shelf small including scrubing, de-rusting the surface with abbrasive paper. Welding of loose joints. Painting with one coat of synthetic enamel paint of colour shade OG/ steel grey / royal ivory white over a coat of red oxide primer with spray machine as specified and directed by Engineer-in-Charge.

TABLE OFFICE OFFICER STEEL (Drawing No FD-84 M, FD-306 & FD-1003) :- Taking out the unserviceable table top. Supply & fixing of new top of suitable size, made of 18 mm thick pre-laminated particle board bonded exterior grade , one side teakwood shade balancing white.Teakwood beading of 4 mm x 18 mm size fixed all round the top, joined at corners in Mitre joint with adhesive and panel pins and duly given a coat of high gloss french polish complete and rest all as per drawing and directed by GE/Engr-in-Charge.

All as per item No 26.00 above but removing the existing unserviceable lock from the drawer/shutter of table. Supply & fixing new brass lock 50mm/suitable size (ISI marked), four levers with duplicate keys complete and rest all as per drawing.

All as per item No 26.00 above but taking out unserviceable drawer Supply and fixing new steel drawer made out of 1mm thick MS sheet duly painted one coat with synthetic enemal paint over one coat primer as directed by Engr-in-Charge and rest all as per drawing

All as per item No 26.00 taking out unservicable leg. Supply and fixing of legs 25 mm square tube of mild steel of 1.6mm wall thickness complete in all respect in replacement of unserviceable legs as directed by GE/Engr-in-charge.

All as per item No 26.00 taking out unserviceable U shape frame on long side. Supply and fixing of U shape frame on long side complete in all respect as directed by GE/Engr-in-charge.

All as per item No 26.00 taking out unserviceable U shape frame on short side. Supply and fixing of U shape frame on short side complete in all respect as directed by GE/Engr-in-charge.

All as per item No26.00 taking out unserviceable shutter of the cabinet. Supply and fixing of shutter of the cabinet complete in all respect as directed by GE/Engr-in-charge.

All as per item No26.00 taking out unserviceable shoe. Supply and fixing of PVC shoe complete in all respect as directed by GE/Engr-in-charge.

All as per item No 26.00 above but preparation of old painted iron & steel surfaces (externally and internally ) by scraping & rubbing with abrassive paper, removing dents and scratches, if any. Filing the same with paste filler. Applying a coat of OG/steel grey synthetic enamel paint over a coat of red oxide primer as directed by Engineer-in Charge.

CSHOE RACK (Drawing No FD/E6/MAP/02/R) Taking out the unserviceable pipe of 25mm dia of legs. Supply & fixing by way of arc welding 25mm dia MS Pipe of 18 gauge complete in all respects and all as per drawing and directed by GE/Engr-in-Charge.

All as per item No27.00 above but removing the existing unserviceable Jali frame work of 3mm dia MS rod. Supply & fixing Jali frame work of 3mm dia MS rod of suitable size, by way of welding to 19mm dia MS Pipe of 18 guage. Rest all as per drawing.

All as per item No 27.00above but removing the existing unserviceable 19mm dia MS Pipe 18 guage. Supply & fixing 19mm dia MS Pipe 18 guage of suitable size made to shape as existing by way of welding to 25mm dia MS Pipe of 18 guage of legs. Rest all as per drawing.

All as per item No27.00 above but removing the existing unserviceable shoe. Supply & fixing PVC Shoe of suitable size and 3 mm thickness to 25mm dia MS Pipe of 18 guage of legs. Rest all as per drawing.

All as per item No 27.00 above but painting of the shoe rack in black colour by way of powder coating as per standard workmanship. Rest all as per drawing.

TABLE COMPUTER (Drawing No FD/E6/MAP/03/any other type with similar Mainframe.) Taking out the unserviceable rectangular CR Pipe of dimension 25mm x 50mm of legs of suitable length. Supply & fixing by way of arc welding rectangular CR Pipe of dimension 25mm x 50mm of legs of suitable length complete in all respects and as per drawing and directed by GE/Engr-in-Charge.

All as per item No 28.00 above but removing the existing unserviceable top of the table. Supply & fixing top of the table suitable size, made out of 18 mm thick pre-laminated particle board exterior grade, one side with teakwood shade balancing white including beading of 4 mm x 18 mm size fixed with fevicol and panel pins joined at corners in MITRE joint and duly given a cost of high gloss french polish and complete and rest all as per drawing. Rest all as per drawing.

All as per item No28.00above but removing the existing unserviceable telescopic channel of key board tray of the table. Supply & fixing telescopic channel (ISI marked) of key board tray of the table of suitable size. Rest all as per drawing.

All as per item No 28.00above but removing the existing unserviceable telescopic channel of drawer of the table. Supply & fixing telescopic channel (ISI marked) of drawer of the table of suitable size. Rest all as per drawing.

All as per item No 28.00 above but removing the existing unserviceable nylon buffers in the legs of the table. Supply & fixing nylon buffers in the legs of the table of suitable size. Rest all as per drawing.

All as per item No 28.00 above but removing the existing unserviceable drawer of the table. Supply & fixing drawer of the table made to shape as existing of suitable size from 18 mm thick pre-laminated particle board exterior grade, one side with teakwood shade balancing white. Rest all as per drawing.

All as per item No28.00 above but removing the existing unserviceable prelaminated panel in legs of the table. Supply & fixing panel in legs of the table of suitable size from 18 mm thick pre-laminated particle board exterior grade, both side with teakwood shade. Rest all as per drawing.

All as per item No 28.00above but removing the existing unserviceable lock on the drawer of the table. Supply & fixing brass lock four lever with duplicate keys in the drawer of the table. Rest all as per drawing.

All as per item No28.00 above but removing the existing unserviceable prelaminated shelf/bottom of the table. Supply & fixing shelf/bottom of the table of suitable size from 18 mm thick pre-laminated particle board exterior grade, Both side with teakwood shade. Rest all as per drawing.

CHARPOY FOLDING IRON PIPE FD-365/ANY OTHER FD) Taking down and removing of old unserviceable plywood from charpoy folding iron pipe. Supply and fixing at top new plywood BWR 12 mm thick(02 pieces of suitable dimensions) ISI marked of quality approved by GE. Realignment of the frame of Charpoy GI pipe in original shape as directed and specified by GE/Engr-in-Charge. All as specified and directed by GE/Engr-in-Charge.

All as per item No. 29.00 above but taking out unserviceable U shaped half portion of ms tube. Supply and fixing of New U shaped half portion consisting of half of 02 long rails and short rail of 35 mm dia MS conduit pipe of thickness 2 mm in place of unservicable U shaped half portion complete all as specified and directed by GE/Engr-in-Charge.

All as per item No29.00above but taking out unservicable head rest. Supply and fixing of head rest of 35 mm dia MS conduit pipe of thickness 2 mm in replacement of unserviceable head rest complete all as specified and directed by GE/Engr-in-Charge.

All as per item No.29.00 above but taking out unservicable foot rest. Supply and fixing of foot rest of 35 mm dia MS conduit pipe of thickness 2 mm in replacement of unserviceable foot rest complete all as specified and directed by GE/Engr-in-Charge.

All as per item No. 29.00 above but taking out unservicable 120x120x5mm FI gusset. Supply and fixing of 120x120x5mm FI gusset plate duly revited 32 mm dia of 35 mm dia in replacement of unserviceable FI gusset plate complete all as specified and directed by GE/Engr-in-Charge.

All as per item No.29.00 above but taking out unservicable 25x5mm FI stay. Supply and fixing of 225x60 FI Sth cut to and bend at 150 to avoid folding 25x5 FI stay duly revited with 6 mm dia revit and washer in replacement of unserviceable 25x5 FI stay complete all as specified and directed by GE/Engr-in-Charge.

All as per item No. 29.00 above but taking out unservicable shoe. Supply and fixing of hard rubber shoes of minimium thickness 5mm at the bottom of each leg in place of unserviceable hard rubber shoes complete all as specified and directed by GE/Engr-in-Charge.

All as per item No. 29.00 above but taking out unservicable leg. Supply and fixing of leg of 35 mm dia MS conduit pipe of thickness 2 mm in replacement of unserviceable legs complete all as specified and directed by GE/Engr-in-Charge.

All as per item No 29.00 above but painting of charpoy with a coat of Synthetic enamel of black colour superior quality over a coat of red oxide primer as per standard workmanship as directed by GE/Engr-in-Charge.

RACK SIX TIER STEEL (FD-1038)/ RACK ADJUSTABLE 6 TIER STEEL (FD-106M) Taking out unservicable shelf. Supply and fixing of shelf made up of 1mm thick MS sheet made to shape as existing or according to drawing including painting to match existing colour as directed by GE/Engineer-in-charge.

All as per item No30.00 above but taking out unservicable leg. Supply and fixing of leg made up angle of 40mmx40mmx3mm thick Mild steel according to drawing including painting to match existing colour as directed by GE/Engineer-in-charge.

All as per item No30.00 above but preparation of steel surface of side rack with trays including scrubing, de-rusting the surface. Fixing of damaged/loose joints if any.Painting with one coat of synthetic enamel paint superior quality over a coat of red oxide primer with spray machine as specified and directed by Engineer-in-Charge.

RACK ADJUSTABLE THREE TIER STEEL FD-106M Taking out unservicable shelf. Supply and fixing of shelf made up of 1mm thick MS sheet made to shape as existing or according to drawing painting to match existing colour as directed by GE/Engineer-in-charge.

All as per item No 31.00 above but taking out unservicable leg and Supply and fixing of leg made up angle of 40mmx40mmx3mm thick Mild steel angle according to drawing including a coat of synthetic enamel of superior quality over a applying a coat of red oxide primer with spray machine after prepration of surface to match existing colour as directed by GE/Engineer-in-charge.

All as per item No 31.00 above but preparation of steel surface of side rack with trays including scrubing, de-rusting the surface. Fixing of damaged/loose joints if any. Painting with one coat of synthetic enamel paint superior quality over a coat of red oxide primer with spray machine as specified and directed by Engineer-in-Charge.

RACK PIGEON HOLE STEEL FD-106M/FD-1037 Taking out unservicable shelf and its partition without damaging the adjacent parts and Supply and fixing of shelf made up of 1mm thick MS sheet made to shape as existing or according to drawing including a coat of synthetic enamel of superior quality over a applying a coat of red oxide primer with spray machine after prepration of surface to match existing colour as directed by GE/Engineer-in-charge.

All as per item No32.00 above but taking out unservicable leg and Supply and fixing of leg made up angle of 40mmx40mmx3mm thick Mild steel according to drawing including a coat of synthetic enamel of superior quality over a applying a coat of red oxide primer with spray machine after prepration of surface to match existing colour as directed by GE/Engineer-in-charge.

All as per item No32.00 above but preparation of steel surface of side rack with trays and fixing of damaged/loose joints if any, including scrubing, de-rusting the surface and painting with one coat of synthetic enamel paint superior quality over a coat of red oxide primer with spray machine as specified and directed by Engineer-in-Charge.

CHAIR SCHOOL WITH HAND BOARD FD/E6/MAP/05 Taking out unservicable one piece PVC seat and back of minium weight 1.40 KG. Supply and fixing one piece PVC seat and back as existing as directed by GE/Engineer-in-charge.

All as per item No33.00 above but taking out unservicable hand board. Supply and fixing of hand board made of 18 thick prelaminated particle of both side white with edges fixed with plastic laminated beading of 3mm thickness with synthetic adhesive and headless pins of suitable size to be screwed th 25 mm dia hollow steel pipe hinged on the arm as directed by GE/Engineer-in-charge.

All as per item No 33.00 above but removing the existing unserviceable shoe. Supply & fixing PVC Shoe of suitable size and 3 mm thickness to 25mm dia MS Pipe of 18 guage of legs. Rest all as per drawing.

All as per item No 33.00 above but welding of damaged/loose joints of any part. Scrubing and painting joint with one coat of synthetic enamel paint black colour superior quality over a coat of red oxide primer with spray machine as specified and directed by Engineer-in-Charge.

CHAIR SCHOOL WITH HAND BOARD FD-120 Taking out unservicable one piece PVC seat and back of minium weight 1.40 KG. Supply and fixing one piece PVC seat and back as existing as directed by GE/Engineer-in-charge.

All as per item No 34.00 above but taking out unservicable hand board. Supply and fixing of hand board made of 18 thick of teakwood first class duly french polished of suitable size to be screwed th 25 mm dia hollow steel pipe on the arm as directed by GE/Engineer-in-charge.

All as per item No 34.00 above but removing the existing unserviceable shoe. Supply & fixing PVC Shoe of suitable size and 3 mm thickness to 25mm dia MS Pipe of 18 guage of legs. Rest all as per drawing.

All as per item No34.00 above but welding of damaged/loose joints of any part. Scrubing and painting joint with one coat of synthetic enamel paint black colour superior quality over a coat of red oxide primer with spray machine as specified and directed by Engineer-in-Charge.

LADDER STEEL FD-238 Welding the damaged/loose joints of any part as specified and directed by Engineer-in-Charge.

All as per item No 35.00 above but taking out unservicable stinger of 25mm dia ms pipe. Supply and fixing stinger of 25mm dia MS pipe of 2mm thickness as existing as directed by GE/Engineer-in-charge.

All as per item No 35.00 above but taking out unservicable rail/legs of 25mm dia MS pipe. Supply and fixing rail/Legs of 25mm dia MS pipe of 2mm thickness made t o shape/as existing and directed by GE/Engineer-in-charge.

All as per item No 35.00above but taking out unservicable hard rubber shoe from bottom and top of 25mm dia MS pipe of leg/rail. Supply and fixing hard rubber shoe of thickness 5mm at bottom and top of 25mm dia MS pipe of leg/rail as directed by GE/Engineer-in-charge.

All as per item No 35.00 above but preparation of steel surface of ladder including scrubing, de-rusting the surface and painting with one coat of synthetic enamel paint black colour superior quality over a coat of red oxide primer with spray machine as specified and directed by Engineer-in-Charge.

Table 1200mm x 900mm (FD/MAP-II/03) :- Removing of unservicable table top. Supply & fixing new table top of suitable size, made out of 18 mm thick pre-laminated particle board exterior grade, one side with teakwood shade balancing white including beading of 4 mm x 18 mm size fixed with fevicol and panel pins joined at corners in MITRE joint and duly given a cost of high gloss french polish and complete and rest all as per drawing.

All as per item No 36.00 above but taking our unservicable Shoes. Supply and fixing of PVC shoes of thickness 3 mm suitable for legs of size 25mm square tube as approved by GE/Engr-in-Charge in replacement of unserviceable shoes.

All as per item No 36.00 taking our unservicable leg. Supply and fixing of leg 25mm square tube of mild steel of 1.6mm wall thickness complete in all respect in replacement of unserviceable legs as directed by GE/Engr-in-charge.

All as per item No 36.00 taking our unservicable long rail. Supply and fixing of long rail 25mm square tube of mild steel of 1.6mm wall thickness complete in all respect in replacement of unserviceable long/Short rail as directed by GE/Engr-in-charge

All as per item No36.00 taking our unservicable short rail. Supply and fixing of short rail 25mm square tube of mild steel of 1.6mm wall thickness complete in all respect in replacement of unserviceable long/Short rail as directed by GE/Engr-in-charge.

All as per item No36.00 above but applying one coat of synthetic enamel paint superior quality of shade OG/Steel Grey over a coat of red oxide primer on the steel frame after preparation of surface as per standard workmanship and directed by GE/Engr-in-Charge.

CHARPOY DOUBLE BUNK :- Taking down and removing of old unserviceable plywood from charpoy GI pipe.Supply and fixing at top new plywood BWR 12 mm thick ISI marked of quality approved by GE. Retightening and Realignment of the frame of Charpoy GI pipe in original shape after carrying out threading as per requirement of rails or legs as directed and specified by GE/Engr-in-Charge. All as specified and directed by GE/Engr-in-Charge.

All as per item No. 37.00 above but Supply and fixing of New Long rail of 32 mm dia GI pipe medium grade (ISI marked) in place of unservicable long rail complete all as specified and directed by GE/Engr-in-Charge.

All as per item No.37.00 above but Supply and fixing of New short rail of 32 mm dia GI pipe medium grade in place of unservicable short rail complete all as specified and directed by GE/Engr-in-Charge.

All as per item No. 37.00 above but taking out unservicable short rail of 32 mm dia GI pipe medium grade and replacing with retrieved Short rail out of the long rail( two short rails from one long rail) vide item at Serial no 38(b) by cutting and threading at both ends to the required size made here-in-before and be fitted in the frame of GI Charpoy complete all as shown in the drg and as directed .

All as per item No.37.00 above but taking out unservicable leg. Supply and fixing of New legs of 32 mm dia GI pipe medium grade in place of unservicable legs complete all as specified and directed by GE/Engr-in-Charge.

All as per item No. 37.00 above but taking out unservicable checknut. Supply and fixing of Check nuts made of 10 mm thick MS plate galvanized coating suitable for 32mm dia GI pipe medium grade for GI pipe Charpoy.

All as per item No. 37.00 above but Supply and fixing of 32 mm iron medium grade Elbows three ways of GI suitable for 32mm dia GI pipe medium grade for fixing long rail short rail and legs in GI Charpoy.

BED HARD STEEL FD/E6/MAP/08R :- Taking down and removing of old unserviceable plywood from bed hard steel pipe.Supply and fixing at top new plywood BWR 12 mm thick ISI marked of quality approved by GE. Retightening and Realignment of the frame of bed hard steel pipe in original shape after carrying out threading as per requirement of rails or legs as directed and specified by GE/Engr-in-Charge. All as specified and directed by GE/Engr-in-Charge.

All as per item No. 38.00 above but taking out unservicable long rail. Supply and fixing of New Long rail of 25x65 mm CR rectangular pipe (18 gauge) medium grade in place of unservicable long rail complete all as specified duly arc welded as directed by GE/Engr-in-Charge.

All as per item No. 38.00 above but taking out unservicable short rail. Supply and fixing of New short rail of 25x65 mm MS rectangular pipe (18 gauge) medium grade in place of unservicable short rail complete all as specified duly arc welded as directed by GE/Engr-in-Charge.

All as per item No.38.00 above but taking out unservicable stiffner. Supply and fixing of New stiffners 25x25 mm MS rectangular square pipe (18 gauge) medium grade in place of unservicable stiffners complete all as specified duly arc welded as directed by GE/Engr-in-Charge.

All as per item No. 38.00 above but taking out unservicable leg. Supply and fixing of New legs of 38x38 mm of length 500mm of head board of MS square pipe medium grade in place of unservicable legs complete all as specified duly arc welded as directed by GE/Engr-in-Charge.

All as per item No.38.00 above but taking out unservicable leg. Supply and fixing of New legs of 38x38 mm of length 800mm of foot board of MS square pipe medium grade in place of unservicable legs complete all as specified duly arc welded as directed by GE/Engr-in-Charge.

All as per item No38.00 above but Supply and fixing of prelaminated particle board of teak shade on both sides exterior grade of suitable size edges fixed using synthetic adhesive and headless pin with teak wood beading of size 4x18 mm french polished duly screwed in the head board as per drawing in place of unservicable prelaminated particle board in the head board complete all as specified duly arc welded as directed by GE/Engr-in-Charge.

All as per item No 38.00 above but welding of MS strip 20x45 mm MS strip in the head board/ foot board complete in all respect as specified duly arc welded as directed by GE/Engr-in-Charge.

All as per item No.38.00 above but Supply and fixing of prelaminated particle board of teak shade on both sides exterior grade of suitable size edges fixed using synthetic adhesive and headless pin with teak wood beading of size 4x18 mm french polished duly screwed in the foot board as per drawing in place of unservicable prelaminated particle board in the foot board complete all as specified duly arc welded as directed by GE/Engr-in-Charge.

All as per item No 38.00 above but taking out unservicable shoe. Supply and fixing of PVC/ hard rubber shoes of minimium thickness 5 mm suitable for legs of size 38x38 mm square tube as approved by GE/Engr-in-Charge in replacement of unserviceable shoes.

DESK STEEL ANY TYPE A or B :- Removing of unservicable table top of the box of the desk. Supply & fixing new table top of the box of suitable size as existing, made out of 18 mm thick pre-laminated MDF board exterior grade, one side with teakwood shade balancing white including beading of 4 mm x 18 mm size fixed with fevicol and panel pins joined at corners in MITRE joint and duly given a cost of high gloss french polish and complete and rest all as per drawing.

All as per item No 39.00 taking our unservicable front leg of the of desk. Supply and fixing of front leg 25mm square pipe of mild steel of 1.6mm wall thickness made to shape complete in all respect in replacement of unserviceable legs as directed by GE/Engr-in-charge.

All as per item No 39.00 taking our unservicable leg of the seat of desk. Supply and fixing of leg 25mm square pipe of mild steel of 1.6mm wall thickness made to shape as existing complete in all respect in replacement of unserviceable legs as directed by GE/Engr-in-charge.

All as per item No 39.00 taking our unservicable long rail of any part of box/seat/stiffner. Supply and fixing of long rail any part of box/seat/stiffner 25mm square pipe of mild steel of 1.6mm wall thickness complete in all respect in replacement of unserviceable long/Short rail as directed by GE/Engr-in-charge.

All as per item No 39.00 taking our unservicable short rail. Supply and fixing of short rail 25mm Conduit pipe of mild steel of 1.6mm wall thickness complete in all respect in replacement of unserviceable Short rail as directed by GE/Engr-in-charge.

All as per item No 39.00 but removing of unservicable table bottom of the box of the desk. Supply & fixing new table bottom of the box of suitable size as existing, made out of 18 mm thick pre-laminated MDF board exterior grade, one side with teakwood shade balancing white including beading of 4 mm x 18 mm size fixed with fevicol and panel pins joined at corners in MITRE joint and duly given a cost of high gloss french polish and complete and rest all as per drawing.

All as per item No 39.00 but removing of unservicable table back of the box of the desk . Supply & fixing new table back of the box of suitable size, made out of 18 mm thick pre-laminated MDF board exterior grade complete and rest all as per drawing.

All as per item No 39.00 but removing of unservicable side of the box of the desk. Supply & fixing new table side of the box of suitable size made to shape of 18 mm thick pre-laminated MDF board exterior grade, one side with teakwood shade balancing white including beading of 4 mm x 18 mm size fixed with fevicol and panel pins joined at corners in MITRE joint and duly given a cost of high gloss french polish and complete and rest all as per drawing.

All as per item No 39.00 taking our unservicable seat of bench. Supply and fixing of seat of bench made of 20 mm thick plank one piece shesham wood duly french polished with edges well chemfered complete in all respect in replacement of unserviceable seat of bench as directed by GE/Engr-in-charge.

All as per item No 39.00 taking our unservicable back of bench. Supply and fixing of back of bench made of 20 mm thick plank one piece shesham wood duly french polished with edges well chemfered complete in all respect in replacement of unserviceable back of bench as directed by GE/Engr-in-charge.

All as per item No 39.00 but polishing of the wooden parts of desk after preparation of surface viz-a-viz smothening of surface using abrassive paper/angle grinder applying of wooden surface filler on wooden parts of desk as directed by GE/Engr-in-charge.

All as per item No 39.00 taking out unservicable bottom rail of desk. Supply and fixing of bottom rail 25 mm square pipe of mild steel of 1.6 mm wall thickness complete in all respect in replacement of unserviceable bottom rail welded using arc welding with two 25x25x3mm flat iron at the bottom and as directed by GE/Engr-in-charge.

All as per item No 39.00 but fixing/welding of damaged / broken various joints of the desk using arc welding and painting the joints and the adjacent sides in black enamel paint as directed by GE/Engr-in-charge.

All as per item No 39.00 but fixing/welding of damaged / broken various joints of the desk using arc welding and painting the joints and the adjacent sides in black enamel paint as directed by GE/Engr-in-charge.

All as per item No 39.00 above but applying one coat of synthetic enamel paint superior quality black colourover a coat of red oxide primer on the steel frame after preparation of surface as per standard workmanship and directed by GE/Engr-in-Charge.

PAINTING OF STEEL FURNITURE : - Painting of table typist. M&L for preparation of old painted iron/steel surfaces by scraping & rubbing with Abrassive paper (externally and internally) broken/damaged welding or unscrewed parts to be refixed/screwed/welded with main frame without damaging. Removing dents and scratches, if any and filing the same with paste filler and applying one coat of superior quality of OG/Steel grey/white synthetic enamel paint spray machine over a coat of red oxide primer as directed by GE/Engr-in Charge.

All as per item No 40.00 but Book shelf Steel with Glass door

All as per item No 40.00 but Cabinet with glass panel door with four shelves

All as per item No 40.00 but Cabinet cardex steel two drawers

All as per item No 40.00 but Cabinet steel filing small three drawers/Cabinet filing steel and drawers/filing cabinet steel 900 x 450 x 600

All as per item No 40.00 but Locker pigeon hole 1.5 x 1.5 x 2 with 15 compartments with locking arrangements

All as per item No 40.00 but Locker steel with 12 compartments

All as per item No 40.00 but Rack stationary steel /rack 6' x 4'x3

All as per item No 40.00 but Rack steel 6.25x6.25x15 inch with 05 selves

All as per item No 40.00 but Rack steel rifles

All as per item No 40.00 but bed stead iron hospital

All as per item No 40.00 but couch examination

DESK STEEL FD-1021 :- Removing of unservicable table top of the box of the desk. Supply & fixing new table top of the box of suitable size, made out of 18 mm thick pre-laminated MDF board exterior grade, one side with teakwood shade balancing white including beading of 4 mm x 18 mm size fixed with fevicol and panel pins joined at corners in MITRE joint and duly given a cost of high gloss french polish and complete and rest all as per drawing.

All as per item No 41.00 above but taking our unservicable Shoes. Supply and fixing of PVC shoes of thickness 3 mm suitable for legs of size 25mm Conduit pipe as approved by GE/Engr-in-Charge in replacement of unserviceable shoes.

All as per item No 41.00 taking our unservicable leg. Supply and fixing of leg 25mm Conduit pipe of mild steel of 1.6mm wall thickness made to shape complete in all respect in replacement of unserviceable legs as directed by GE/Engr-in-charge.

All as per item No 41.00 taking our unservicable long rail. Supply and fixing of long rail 25mm Conduit pipe of mild steel of 1.6mm wall thickness complete in all respect in replacement of unserviceable long/Short rail as directed by GE/Engr-in-charge.

All as per item No 41.00 taking our unservicable short rail. Supply and fixing of short rail 25mm Conduit pipe of mild steel of 1.6mm wall thickness complete in all respect in replacement of unserviceable long/Short rail as directed by GE/Engr-in-charge.

All as per item No 41.00 but removing of unservicable table bottom of the box of the desk Supply & fixing new table bottom of the box of suitable size, made out of 18 mm thick pre-laminated MDF board exterior grade, one side with teakwood shade balancing white including beading of 4 mm x 18 mm size fixed with fevicol and panel pins joined at corners in MITRE joint and duly given a cost of high gloss french polish and complete and rest all as per drawing.

All as per item No 41.00 but removing of unservicable table back of the box of the desk Supply & fixing new table back of the box of suitable size, made out of 06 mm thick pre-laminated MDF board exterior grade complete and rest all as per drawing.

All as per item No 41.00 but removing of unservicable table side of the box of the desk Supply & fixing new table side of the box of suitable size made to shape of 18 mm thick pre-laminated MDF board exterior grade, one side with teakwood shade balancing white including beading of 4 mm x 18 mm size fixed with fevicol and panel pins joined at corners in MITRE joint and duly given a cost of high gloss french polish and complete and rest all as per drawing.

All as per item No 41.00 above but applying one coat of synthetic enamel paint over a coat of red oxide primer on the steel frame after preparation of surface as per standard workmanship and directed by GE/Engr-in-Charge. Note: - The BOQ Comprises of quantities of items of furniture to be repaired/painted/recanned at site in Pathankot, Jandwal and Dalhousie as directed by Engr-in-Charge/GE. Bifurcation wrt item of furniture can be confirmed from BSO office. .

SEALINE BUILDERS