Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.6 LAccepted-AOC | L1 | Accepted-AOC Awarded | |
| 2 | L2₹35.0 L+₹1.7 L (4.98%)Rejected-Finance | L2 | Rejected-Finance Rejected |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
10 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Subroto Park
GE AF Subroto Park c o 56 APO
ADDN/ ALTN TO CERTAIN BR SERVICES AT AFCME AT CAMERO COMPLEX, ADDN/ ALTN TO DT DNT WG AT AFRO AT CAMERO COMPLEX AND ADDITION/ ALTERATION OF ANNEXE BUILDING OF CSDO AT CAMERO COMPLEX
2022_MES_551700_1
GE/SP/ TOKEN-04/2022-23
Open Tender
Civil Works
Item Rate
180 days
Subroto Park Delhi Cantt
Please refer Tender documents.
10 documents required · 10 mandatory
₹500
Yes
GE AF Subroto Park
₹70,000
Yes
15 Nov 2022
13 Sept 2022
17 Oct 2022
13 Sept 2022
10 Oct 2022
27 Sept 2022
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and as directed by Engineer-in-Charge.
M&L for virified Ceramic light shade tiles 9 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match flooring( in any pattern) and jointed with neat cement slurry over 15 mm thick cement screed in CM 1:6 and pointed with coloured cement matching with surfaces of tiles as in floor complete all as specified and as directed by Engr-In-Charge.
Ditto as above item No-2 but as on vertical surface of wall such as skirting/dado incl 10mm thick cement plaster (1:4) as in backing coat of tiles complete all as specified and as directed by Engineer-in-Charge.
Material and labour Glazed ceramic coloured tiles in vertical surface 450x350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick screed in cement 1 :4 and pointed in white or coloured cement to match the shade complete all as specified and as directed by Engineer-in-Charge.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.50 Sqm each complete all as specified and as directed by Engineer-in-Charge.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5Sqm but not exc 4.00 Sqm each complete all as specified and as directed by Engineer-in-Charge.
S&F aluminium powder coated any colour (minimum thickness of powder coating 50 micron) for doors, windows, partician, ventilators with one or more rebates including joining cleat for fixing etc. including taking down each chowkhats or frames with shutters (without taking off shutters from the frames) complete all as specified and as directed by Engineer-in-Charge.
S&F aluminium powder coated an (minimum thickness of powder coating 50 micron) as in window and ventilator shutters, sliding type three track, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber packing, anodised aluminum snap beading screws etc complete all as specified and as directed by Engr-In-Charge.
S&F for powder coated aluminium doors shutters,( thickness of powder coating not less than 50 micron) alumonium section weighing 0.55 kg/m incl necessary joining cleats, glazing clips, rubber neoprene packing , handels 2 Nos in each door , hinges, anodised aluminium snap beading screws etc. complete all aspecified and directed by engr-In-Charge.
S&F 12mm thick particle board prelaminated on both sides as in panel of door shutters partition wall, work stations including beading etc.omplete all as specified and directed by Engr-in-Charge.
S&F Aluminium(extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as directed and specified.
S&F brass body Mortice lock, vertical type,size 100 mm 4 lever, incl escutcheon plate and two No keys fixed complete all as specified and directed by Engr-in-Charge.
S&F in repairs for double action floor spring hydraulically regulated mode lap of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed to shutter complete all as specified and directed by Engr-in-Charge.
S & F in repair 150mm long floor door stopper of brass body and tongue with hard drawn steel spring complete all as specified and as directed by Engineer-in-Charge.
S & F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples
S&F in repair vertical venetian blinds made out of nylon cloth of any colour as approved including hanging arrangement rollers etc complete as specified and directed by Engineer in charge.
Material and labour for false ceilings using GI snap grid system with roll-formed out of hot dip galvanised steel caping (powder coated) main runner 38 x 24 mm , cross Tee 29 x 24 mm and wall angle 24 x 24 mm members suspended with 4mm dia GI wire, carry maximum load up to 8.10 Kg/Sqm with 4mm thick designer ceiling board , pre painted Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions size 595 x 595mmx 4mm thick any texture (Lake and Hill, oceaniccascade or Electra) as approved by GE all as per , Everest Ceiling grid system 'Regular T-2430' or its equivalent make of "'Ramco, Charminar/Armstrong'' at any height including dismantling complete all as specified and as directed by Engr-In-Charge.
M &L for PVC profile for wall panelling colour / shade as approved size 250mm wide, 08 mm over all thick with 1 mm wall thickness fixed with screw to mild steel square ( size 20mmx 20mmx 1mm thick) tubler frame work including one coat of red oxide primer, fixed to walls and including dismentling complete all as specified and directed by Engr-in-Charge.
M&L for PVC profile corner beading L/T type for wall panelling, colour/shade matching with wall panelling complete all as specified and directed by Engineer-in-Charge.
Taking down cement or cement lime plaster any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-Charge.
M&L Rendering 15mm thick in CM 1:6 on other than fair faces of brick work or concrete surfaces of walls, finished even and smooth ( without using extra cement) complete all as specified and directed by Engineer-in-Charge.
M&L for rendering CM (1:4) 15 mm thick on fair faces of brick surfaces or concrete surfaces even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
M&L for rendering CM (1:3) 5 mm thick on concrete surfaces of ceiling, even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
Supply only liquid water proofing compund only
M&L for preparation of new plastered surfaces of walls, and applying two coats of distemper oil emulsion over a coat of primer incl 3mm thick elastomeric wall care putty on walls complete all as specified and directed by Engineer-in-Charge.
M&L for preparation on new or previously untreated wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces over putty complete all as specified and directed by Engineer-in-Charge.
M&L preparation of new plastered or unplastered surface and applying three coats of white wash on ceiling complete all as specified and directed by Engineer-in-Charge.
M&L for prepration of old plastered or unplastered surfaces of walls and applying two coat of approved shade of oil emulsion distemper, including repairing of pot holes and cracks with putty,complete all as specified and directed by Engr-in-Charge.
Material & Labour for prepration of old plastered or unplastered surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed by Engineer-in-Charge.
M&L Modular partition workstation with 45mm thick with per-laminated top of 25mm thick as per color approved with metal powder coated legs, Workstation having glass/fabric/white board prating on the top of the table, with mobile pedestal, keyboard and CPU trolley. Overall size for per seat 2400x600x1200mm.(two seaters) including dismentling complete all as specified and directed by Engineer-in-Charge.Make :-Model No ESC/WS/010 of Royal Koas or its equivalent.
Demolition of Reinforced Cement concrete/brickwork in suspended slabs, beams, lintels etc. in cement mortar or cement concrete (reinforcement cut as required to facilitate demolition) complete all as specified and directed by Engr-In-Charge.
Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, arches etc.
Excavation in trenches n.exc 1.50m wide and n.exc 1.5m deep for foundation etc.in hard/dense soil and getting out complete all as specified and directed by Engr-In-Charge.
M & L for cement concrete 1:4:8 type D2 using (40mm graded aggreate) in foundation filling & mass concrete complete all as specified and directed by Engr-In-Charge.
M&L Reinforced cement concrete nominal mix 1:2:4, type B-1 using (20mm graded aggregate) in foundations, including rafts, footing, foundation beams, plinth beams, bases for columns etc; basement slab, under reamed pilles and mass concrete complete all as specified and directed by Engr-In-Charge.
M&L Reinforced cement concrete nominal mix 1:2:4, type B-1 using (20mm graded aggreate) in slabs supported on walls, beams and column in floors,roofs,landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engr-In-Charge.
M&L RCC M-25 using 20 mm graded aggregate as in slab, shelves etc complete all as specified and directed by Engr-In-Charge.
M&L RCC M-25 (20mm graded agg) as in beams, cantilevers, lintels, over 1.5 m span complete all as specified and directed by Engr-In-Charge.
M & L Reinforced cement concrete M-25 using 20mm graded stone aggregate as in chajjas and the like complete all as specified and directed by Engr-In-Charge.
M&L Reinforced cement concrete nominal mix 1:2:4, type B-1 using (20mm graded aggregate) in columns, pillars, piers,post and struts complete all as specified and directed by Engr-In-Charge.
M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for flat and rough finished surface of concrete complete all as specified and directed by Engr-In-Charge.
M & L formwork to chullah hoods, chajjas, trough and similar items including edges finished rough surfaces of concrete complete all as specified and directed by Engr-In-Charge.
M&L Mild steel bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spiraly hooping ends binding with and including mild steel wire (aneealed) nit less than 0.9mm dia or securing with clips quality conforming to TMT bars complete all as specified and directed by Engr-In-Charge.
Description all as above here in Ser No 44 but 5mm dia and over upto and including 8mm for stirrups complete all as specified.
M & L for 75 mm thick cement concrete 1:3:6 type C-2, using 40 mm graded stone aggregate as in plinth protection laid to slop of 1:12, finished surface even and fair without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6 mm wide joints through out the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed by Engr-In-Charge.
M&L 40mm th PCC 1:2:4 type B-1 using 20mm graded aggregate as in flooring, finished even and smooth with using extra cement complete all as specified.
M&L for kota stone slab flooring 20-25mm thick over cement screed bed and jointed with grey cement slurry mixed with pigment to match the slab including rubbing, and polishing complete including cement scredd bed 15mm thick in cm 1:6 including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engr-In-Charge.
Ditto all as above item No-48 but as on vertical surface of wall such as skirting/dado incl 10mm thick cement plaster (1:4) as in backing coat of Kota Stone complete all as specified and directed.
M&L for Brick work with subclass B bricks, staright or curved on plan exc 6.00 mtr mean redius, biult in 1:4 cement mortar complete all as specified and as directed by Engr-In-Charge.
M&L for preparation of old surface and applying two coat of oil bound distemper white or tinted on wall over two coat of 3mm thick wall care putty as smooth surfacec omplete all as directed and specified.
S&F steel rolling shutters thickness of lath 1.0mm with out ball bearing , as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer and erected in position , indicated complete :Push pull OR ManuaL type
M&L for preparation of new steel surfaces of any description, not other wise described, over 10 cm width or girth and applying two coats synthetic enamel paint over a coats of red oxide primer.
S&F Safety lever locks mild steel with 4 levers for rolling shutters all as specified and directed.
M&L five layered prefabricated Atactic polypropylene Polymer (APP) modified 3mm thick membrane (weighing not less than 3 Kg/Sqm) reinforced with 160gsm polyster non-woven fabric. Concrete of roof surface shall be scratched with scratching tool before finishing roof surface. When the concrete surface is still green, 10mm thick 1:4 cement plaster shall be laid including liquid water proofing compound as per manufacturers instructions (WPC will be measuerd and paid seperatly). Painting with two coats of water proofing paint with aluminium finish. The roof surface shall be throughly wire brushed, washed, dried up and cleaned of all foreign matter and dust prior to the application primer. On the dried surface one coat of approved bituminoius primer, having density in the range of 0.87 to 0.89 Kg/Litre at 25 degree centigrade and viscosity of 70 to 160 CPS, manufactuered @ 0.4 Litre/ Sqm shall be applied. APP membrane shall be laid on primed surface by torch application method after allowing 24 hours for primer to dry. Laying of APP membrane shall be commenced at the lowest level and worked upto the crest. APP allowing 24 hours for primer to dry. Laying of APP membrane shall be commenced at the lowest level and worked upto the crest. APP membrane will normally be laid in length at right angle of the direction of slope. The overlaps shall be of minimum 100mm on longitudinal directions and 150mm on the transverse direction. All overlaps shall be bonded with bitumen primer and levelled by heating the overlaps with brutane torch. This treatment shall be done by the approved authorised applicators. Guarantee of treatment shall be 10 years. (ii) Independent testing of membrane for the approved technical parameters specified herinafter shall be carried ourt from the approved laboritries like "National Test House, or any other Govt approved laboratory having facilities for the testing membrane. APP membrane shall have following parameteres:- (i) Tear strength :- Longitudnal direction-300N, Transverse direction-250N (ii) Joint Strength :- Longitudnal direction- 650N, Transverse direction-450N.
S&F PVC (SWR) pipes 110mm single socketed in any length with solvent cement joints fixed to walls/laid in floors incl stack clamps of stainless steel with bolts & nuts etc.
S&F PVC SWR bends 110mm
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws including dismantling of asbastos cement (corrugated or semi corrugated) sheeting in roof covering as specified and directed by Engr-in-charge.
S&F steel/work in tubular truses, purlins, rafters, struts, vertical members and similar work including special shape washers complete using ERW or induction butt welded tubes conforming to IS-1161-1979, grade St-240 complete all as specified and directed by Engr-in-charge.
S&F precast machine pressed PCC interlocking paver block of 80 mm thickness, M-40 grade of any shape and size confirming to IS -15658-2006 with grey cement and pigment as approved over 50mm thick sand cushion and 100mm thick, plain cement concrete, type D-2, 1:4:8, (using 40mm graded stone aggregate) as in sub base flooring, surface finished even and rough to receive floor topping including dismentling complete all as specified and directed by Engineer-in-Charge.
S&F non skid coloured ceramic tiles area of each tiles exceeding 0.11sqm but not exceeding 0.18 Sqm and 7mm thick as in floor set & jointed in neat cement slurry & pointed in coloured cement to match over 15mm thick screed in cement mortar 1:4 complete.
M&L for coloured granite slab, 20 + mm thick, as in Plateforms, Kitchen and similar work etc., bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including Chamfering\Rounding the edges complete all as specified and as directed Over 15mm thick screed bed in CM 1:4 complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs Vitreous China wash basin white ovel shape of size 630x450mm including all fitttings (CP Pillar cock, CP angal valve, PVC Connection, waste pipe with CP Coupling complete all as specified and as directed by Engineer-in-Charge.
S & F in rotational moulded polyethylene water tank 1000 litre capacity tripple layer (white colour) (cylindrical vertical with closed top) hoisted and fixed as specified in SSR Part-I including dismentling with all fitting complete all as directed at site.
S&F 20 mm bore Gun Metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed
S&F 20 mm Ball brass valves high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed
S&F in repairs 15 mm bore angle valve chromium plated with wall flange and fancy type with high pressure screwed down with CP flange. Make- ORM- 10053 of Jaquar or its equivalent Parco/Marc complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs Vitreous China wash down water closet pan, white (including fixing bolts, PVC flushing cistern and flush pipe, including connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, Plastic water closet seat, black / white , closed pattern with flat bottom, jet spray with necessary fixing and cover and mild steel chromium plated or aluminised hinging device, required PVC Connection and angle valve etc complete all as specified and as directed by Engineer-in-Charge.
S & F in repairs bib tap cast copper alloy fancy type chromium plated with crutch or butterfly handle screwed down for 15mm bore pipe complete.
S & F in repairs CP Soap dish of Make-AQN-7731 of Jaquar Or Equivalent in MARC/GEM/PARKO complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs 15mm bore two way angle valve chromium plated with wall flange and fancy type high pressure screwed down with CP flange complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs PTMT grating round of 100mm dia (Miniumum wt 100gms) complete all as specified and directed.
S&F in reapirs PTMT grating with waste hole (Minium wt 100 gms)
S&F 20mm bore Tubes, 'medium grade' galvanised, with all fitting and fixed including taking down complete to walls and ceilings or laid in floors complete all as spd.
All as per above item No 75. But 15mm bore .
M & L for solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specifications.
M & L for factory made solid PVC panel door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheety strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded.sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing.
S & F of steel window with side hung shutters including box type hinges with steel handle, hold fast and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
Ditto as per item 79 above but without glazing bars complete all as specified.
S & F of 100 mm long mild steel butt hinges, medium weight cold rolled complete all as specified and directed.
S & F of 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
S & F of 125 mm long extruded anodised aluminium alloy handle, fabricated type complete all as specified and directed.
S & F mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders framed balusters, walk ways, railings, collapsible gates, truss, purlin, frame work of water tanks and similar work conforming to E-165 (Fe-290) complete all as specified and directed by Engineer-in-Charge.
S&F in repiar CP connection 15mm size for Hot & Cold water with CP nuts of length 450mm long all as specified
Material & Labour for prepration of plastered or unplastered surfaces of walls and applying Two coat appex/weather over 3mm wall care putty including priming coat of exterior primer complete all as specified and directed by Engineer-in-Charge.
S&F in repairs factory made 18mm(+0.7mm) thik celuka PVC Ply of density 600kg/cbm manufactured by an ISO-900-2008 certified company.One side prelam and other side plain 18mm thick Celuka PVC ply for kitchen cabinet and cupboards shutter and also manufacturer's test report and test certificate is mandatory with each and every supply of the materail complete as per directions of Engineer-in-charge,manufecturer's specifications and drawing.
S&F in repairs factory made 18mm(+0.7mm) thik celuka PVC Ply of density 600kg/cbm manufactured by an ISO-900-2008 certified company.Plain 18mm thick Celuka PVC Ply for Shelf/Partitions/Drawer and also manufacturer's test report and test certificate is mandatory with each and every supply of the materail complete as per directions of Engineer-in-charge,manufecturer's specifications and drawing.
S&F continous piano hinges, mild steel, bright finish or electrogalvanised of width of flap 30mm complete as specified and as directed
M &L for 125 mm magnetic catches with brass body and striking plate including letting in with knob and fixed complete all as specified and directed by Engr-in-Charge.
S&F of 125 mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed by Engr-in-Charge.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.
Taking down carefully by unscrewing from boards/outlet boxes, fittings and fixtures such as switches,sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse)
M&L for point wiring with single core of FRLS PVC insulated unsheathed ISI marked 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm drawing through in and including PVC conduit size of not less than 20 mm including conduit fittings and accessories concealed in wall / ceiling wiring on ceiling /wall terminated in flush metal box alongwith outer cover plate for mounting modular/piano switch, socket and electronic regulator along with provn of earth wire of PVC insulated, unseathed, 1100 V grade cable multi stranded FRLS ISI marked copper conductor of size 1.5 sqmm all as specified and directed by Engr-in-Charge. (a) For one light point controlled by one SP switch
(b)For one fan/exhaust fan and wall mounted fan point controlled by one SP switch.
All as per item No-95 above but for one 3 pin socket out let, 6 Amps on same board with the cable 1.5 Sqmm size.
All as per item No-95 above but for one 3 pin socket out let, 6 Amps on Independent board with the cable 1.5 Sqmm size.
All as per item No 95 above but with 2.5 Sq mm cable for Independent bd one 3 pin 15 Amps socket outlet including S/C 2.5 Sq mm PVC insulated copper conductor unsheathed 1100 v grade IS -694 FR LS cable for continuous earth wire connected to required size all as specified and directed by Engineer-in-Charge.
S&F switch piano 5 amps flush type single pole one way suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.
S&F socket outlet flush type 5 pin 6 amps suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.
S&F switch piano 16 amps flush type single pole one way suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.
S&F socket outlet 2 in 1, 5 pin 16 amps flush type suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.
Taking down including disconnecting the electric connection of ceiling fan and dismantling blades,greasing and painting the whole assembly including marking MES No complete all as specified and directed
Hanging only ceiling fan received from above and connecting up including fastner and provision of suitable size of copper cable from connector of fans to ceiling rose complete.
Refixing ceiling light fitting recieved from item No 94 with connected accessories after keeping in safe custody untill completion of finishing work and re-fixing the same after completion of false ceiling work including cleaning the existng light fitting and connecting,testing complete all as specified and as directed by Engr-in-Charge.
Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.
Supply and fix in replacement ceiling rose surface type bakelite 65 x 50 mm with three terminals with ISI mark.
Supply and fix in replacement lamp holder PVC/Poly Carbonate type suitable for batten fittings with ISI mark.
M/L for Sub main wiring with under mantioned runs of S/C PVC insulated but unsheathed FRLS cable of specified size with multistranded copper conductors 1100 volt grade IS- 694 marked drawn through and including non metalic PVC conduit pipe medium grade ISI marked (not less than 20 mm dia)along with fittings and accessories all fixed concealed in wall and surface of ceiling and also including the specified runs of specified size earth continuity conductor of similar type of cable complete all as specified and directed by Engineer in charge. (2 runs of main cable one run of earth wire one run of PVC pipe will be measured as an one run) 2 Run of 4 Sqmm cable and one run of 4 sqmm cable dolly earth continuity.
Taking down carefully copper/aluminium surface/conduit sub main wiring from Main DB to sub DB and keeping in safe custody for giving credit and making good disturbed surfaces or walls , floors , etc complete all as specified and directed by Engineer-In-charge. 2 Run of 4 Sqmm cable and one run of 2.5 sqmm cable.
Supply and fix in replacement LED lights fitting 1x 20W, 220V AC, 4' feet decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to fitting with all accessories , and testing complete all as specified and directed by the Engineer-In- Charge.
Supply and fix in replacement LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.
Supply and fixing MCB distribution board with Bus bar 200A neutral link , earth bar made out of CRCA mild steel sheet surface mounting SPN 8 way 230 volts double door type regal gray horizontal type Cat Part No - DHDPSHODRW08 complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in replacement MCBs 10 KA breaking capacity, single pole, 240 volts, 6 to 32 amps C Curve capacity.
Supply and fixing in replacement MCBs 16 KA breaking capacity, DP, 230 volts, 20 amps C Curve capacity.
Taking down old unsv MCB DB including MCBs of any size.
Mahesh Enterprises
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .