GE/PNH-48/2024-25

Amount

Dismantling plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering, complete all as specified and directed.

M&L for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.

M&L for pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, valley gutter and similar works fixed with self tapping screws complete all as specified.

S&F Plain, galvanised, 0.80 mm thick mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) class VIII fixed with 'L' hooks or cranked bolts etc in lieu of screws, complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

M&L for mild steel work as in hand rails, half round or other stock section or core for wooden hand -rail, straight portion drilled and countrsunk for ballusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cuttings, tops to shapes, as directed, drilling, holes, notching for wire etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc. and similar work conforming to Fe-250 Gde E-165 all as specified.

Dismantling timber scantling under 40 sq cm in section in any position, framed work in fillets, rails, posts, rafters,purlins, etc.complete all as directed.

M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified.

M&L for two coats of synthetic enamel painting on new steel surfaces over 10cms width or girth over and incl a coat of red oxide primer etc complete all as specified and directed.

M&L for preparation of steel newly and previous untreated Surfaces of eaves gutter and pipes any description, n. exc 60 cm girth including holderbats, distance pieces, etc. (length measured over bends, branches etc.) and applying two coats of synthetic enamel paint over and incl one coat of primer complete all as specified and directed.

M&L for preparation of old or undecorated steel surface of any description exc.10 cm. in width or girth and applying one coat of synthetic enamel paint complete all as specified.

Taking down cement plaster from stone/brick walls including raking out joints, hacking for keys and scrubbing down with water etc, complete all as specified and directed.

M&L for rendering 15 mm thick on stone masonry surface or other than fair face of brick work or on one side of lathing finished even & smooth without using extra cement in CM 1:6, complete all as specified and directed.

M&L for rendering 15 mm thick on stone masonry surface or other than fair face of brick work or on one side of lathing finished even & smooth without using extra cement in CM 1:4, complete all as specified and directed.

Material & Labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces in painting on walls complete all as specified and as directed.

M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion complete all as specified and as directed.

Demolition of brick work or stone/boulder masonary built in CM incl. all quoins, arches, pillars,etc complete all as specified & directed.

M & L for Walling of random rubble,brought upto course,well bonded bedded, and solidly hearted, built in CM 1:6, complete all as specified & directed.

M & L Walling of random rubble,brought upto course,well bonded bedded, and solidly hearted, built in CM 1:6, But Except stone complete all as specified & directed.

Demolition of cement concrete (unreinforced) as in ground floor and pavings n.exc 15cm thickness below or above ground level all as specified.

M&L for 50mm thick PCC 1:3:6 Type C-1 (using 20mm graded crushed stone aggregates) laid in alternate bays (not exceeding 2 sqm each) as in plinth protection, finished the surfaces even & fair, including filled the joints with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight, complete all as specified and directed.

Demolition stone slabs and tiles of any description or thickness in floors, aprons etc. as in floor surface complete all as specified and directed.

M&L for machine cut Kota stone slab flooring 18-20mm thick , bedded and jointed with grey cement slurry and pointed with grey cement with admixture or pigment to match the shade of Kota stone slab as approved by GE, laid over and including screed bed or bedding layer of mortar 20mm thick in cement mortar (1:6) including cutting, grinding and mirror polishing, complete all as specified and directed.

M&L for machine cut Kota stone slab flooring 18-20mm thick, as in skirting/dado etc jointed with grey cement slurry and pointed with grey cement with admixture or pigment to match the shade of Kota stone slab as approved by GE, over and including rendering of 10mm thick in cement mortar (1:4) including cutting, grinding and mirror polishing, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises complete all as specified and directed.

M&L for Non skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.11 Sqm but n exc. 0.18Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed in CM (1:4), complete all as specified and directed.

M&L for glazed ceramic coloured tiles (450x300mm) x 7mm thick, as in vertical surfaces such as in skirting and dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick back coat layer in cement mortar 1:4, complete all as specified and directed by Engr-In-Charge.

Taking down shutters of any description exc 1 sqm but n exc 2 sqm each, complete all as specified and directed.

Taking down Chowkhats or frames exc 1.5 sqm but n.exc 4 sqm each with shutters (without taking off shutters from the frames), complete all as specified and directed.

Taking down Chowkhats or frames n exc 1.5 sqm each with shutters (without taking off shutters from the frames), complete all as specified and directed.

S&F factory made pressed steel frames of size 105x60mm made out of PBI sheet 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinge,lock strike plate etc. with one shop coat of primer complete all as specified and directed.

S&F factory made pressed steel frames of size 125x60mm made out of PBI sheet 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinge,lock strike plate etc. with one shop coat of primer complete all as specified and directed.

M&L for 35 mm thick plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers,complete all as specified and directed.

S&F 35mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc. size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed.

S &F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and directed.

S&F Steel windows or ventilators, fixed type, with glazing bars, complete all as specified and directed.

S&F Sheet glass, ordinary quality, 3 mm thick and glazing with oil putty or wooden beads, in square, not exc. 0.5 Sqm pane, complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aparture 1.18mm and fixed with tinned tacks or galvanised wire stapple, complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aparture 1.18mm and fixed with tinned tacks or galvanised wire stapple, complete all as specified and directed.

M&L for PCC 1:3:6, type C-1 (using 20mm graded crushed stone aggregate), for fixing of hold fast, copings, plinth bands bed blocks kerb or mud stops,rounded or chamfered angles and edges, including necessary form work complete all as specified and directed.

M&L for preparation of wood and wood based surfaces of any description not otherwise described over 10 cms width or girth and applying two coats of synthetic enamel paint over and incl a coats of pink primer all as specified and directed.

S&F 100 mm long mild steel butt hinges, medium weight, cold rolled and fixed, complete all as specified and directed.

S&F 100mm long aluminium, anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed.

S&F 150mm long aluminium, anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed.

S&F 100 mm long aluminium handles, cast type, anodised and fixed, complete all as specified and directed.

S&F 150 mm long aluminium handles, cast type, anodised and fixed, complete all as specified and directed.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed.

S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, fixing in opening as per specification & drawing complete all as specified and directed.

S&F factory made solid core PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC sheet, 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap inserted for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified & shown in relevant drawing of item No. 08080 in MES Schedule (Part-II) complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing 15mm and connections, including cleaning for refixing or removal to store, complete all as specified and directed.

Taking up or down steel tubing 20 mm and connections, including cleaning for refixing or removal to store, complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks triple layer (Cylindrical vertical with threaded closed top) hoisted and fixed in position all as spd in SSR Pt-I, of capacity 1000 Ltrs incl, screwed for iron pipe or brass ferrule, incl dismentling of existing tank, complete all as specified and directed.

S&F 20mm dia PVC ball cock (PVC float valves) complete high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed as required to use reducer and check nut, complete all as specified and directed.

Supply & fixed in repairs Gate Valve (ISI Marked), cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 20 mm bore, complete all as specified.

Supply & fixed in repairs Stop cock fancy type, chromium plated (ISI Marked), cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore, complete all as specified.

Supply & fixed in repairs stop cock fancy type, chromium plated with long shank and cup (concealed type) (ISI Marked), cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore, complete all as specified.

S&Fixed in repair Bib tap 15 mm bore, Chromium Plated, fancy type (long shank). with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule, complete all as specified.

S&F in repair Pillar taps, fancy type,cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15mm bore, complete all as specified.

S&F GI tubing of 15 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified and directed.

S&F GI tubing of 20 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 600mm long, complete all as specified and directed.

S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed.

S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to walls, complete all as specified and directed.

S&F in repair soap dish, cromium plated fixed to plugs with chromium plated brass screws, complete all as specified and directed.

S&F fixed in repairs squatting pan of size 580 x 440 mm white, with integral foot rests including connection to trap, flushing cistern and flushing pipe, anti-syphonage pipe, etc. complete including 110 mm dia PVC (SWR) 'S' trap set in and including concrete making good to including jointing to existing pipe of floor of size 100mm complete all as specified and as directed.

S&F in repair Brass chromium plated shower rose 125mm size Chromium plated shower roses with or without swivel joints, including fixing to steel pipe or union complete all as specified and as directed.

S&F in repair PVC Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and as directed.

S&F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified and as directed.

S& F for 100mm bends (any radius), complete all as specified and as directed.

S&F in repair 100mm branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, complete all as specified and as directed.

S&F in repair 110mm PVC (SWR) vent cowl, complete all as specified and as directed.

S&F in repair for 110mm PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and as directed.

Dismantling wall and ceiling board (fibre, pulp, PVC, insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillets, complete all as specified and as directed.

S&F Anodised aluminium snap grid Size of grid 605 x 605mm frame work for false ceiling and Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling including 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screwsall as specifiedr complete all as specified and directed.

Dismantling/taking down steel gate of any description area exc 8 sqm but not exc 10 sqm, for refixing in same opening after certain repair works to pillars, complete all as specified and as directed.

M & L for brickwork with sub class B bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

Dismantling fencing wire mesh, any type complete all as specified and directed.

Dismantling posts or struts steel or RCC embedded in concrete any section including taking out embeded portion and making good distrubed groung complete all as specified and directed.

Excavation in post holes (or similar holes) each n exc 0.5 cu.m, getting out in any type of soil(soft/loose and hard/dense soil), returning, filling inand ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed.

M & L for plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregates as in mass concrete, filling in, foundation and flooring complete all as specified and directed.

M & L for plain cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregates as in mass concrete, filling in, foundation and flooring complete all as specified and directed.

M & L for mild steel as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

Supply only Chain link MS galvanised fencing, any size or type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

S & F in repair galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, incl securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed.

M&L for mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

All as per item No 89 above but 8mm to 10mm dia bars in stirrups, spacers and binders complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions and similar work complete all as specified and directed.

M&L for RCC, M-25 design mix as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc. basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for RCC, M-25 design mix as in Columns, pillars, piers, posts and struts complete all as specified and directed.

Fixing of steel gate taking down against srl item No. 77 here in above after necessary repair if any and hosted in position with required props/supports etc, complete all as specified and as directed by Engr-in-Charge.

M&L for one coat of synthetic enamel painting on new steel surfaces over 10cms width or girth over and incl a coat of red oxide primer etc complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in flooring/path etc. finished even & fair, complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B-0 with (using 12.5 mm graded crushed stone aggregates) as in sub base of flooring finishing the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specfied and directed.

M&L for mild steel work conforming to Fe-290 (Gde E-165) as in grills, gratings etc. with ends of bars shouldered and/ or rivetted or forged into spikes; framed guard bars, and similar works all as specfied and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished the surface even and smooth without using extra cement , complete all as specified and directed.

M&L for preparation of new plaster surface of wall including cornices pilaster etc, and applying two coats of cement base paint over a coat of approved primer, complete as specified and directed.

Taking down existing tarfelt including tiles and Demolition of lime / cement concrete & screed bed complete from roof surfaces including parapets and lowering without disturbing the existing RCC roof slab and removing the same to a distance exc. 50m and n. exc. 100m including roughening of old concrete surface of roof by wire brushing and cleaning the surface to remove all loose dust etc., complete all as directed and directed.

M&L for 15mm thick screed bed or bedding layers in cement mortar (1:4) with mixing of water proofing compound @ 3% in order to maintain proper slope over existing roof surfaces for laying APP based polymeric membrane and finished the surfaces even and smooth without using extra cement, complete all as specified and as directed. (NOTE : Polymeric membrane & WPC shall be measured and paid separately under relevant item of this Schedule 'A').

M&L for water proofing treatrment to RCC roof slab, including parapet comprising with the following courses of treatment/specification from bottom to top :- (a) Applying bitumenous primer @ 0.4 ltrs per Sqm over plastered surfaces of roof including parapet surface. (b) Over the priming coat laying one layer APP based polymembric membrane of approved manufacturer 3mm thick, weight not less than 3 Kgs per Sqm reinforced with non woven polyester febric, weight not less than 150 gms per Sqm. Polymeric membrane shall be taken to a height of 60cm (min) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. Note :- (i) Laying APP bassed polymenic membrane shall be done torch on methed or as per manufacturer's instructions. (ii) A minimum overlap of 100mm and 75mm should be made at the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as per manufacturer's instruction. (iii) APP bassed polymeric membrane shall be "Dr Fixit" manufacturered by(i) M/S Pidilite Industries (ii) M/S Texsa India Limited (iii) IWL India Limited (c) Applying two coats of Aluminium paint over APP membrane.)

E&M PORTION:- Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings,removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specifiecd and directed.

M&L for point wiring with two single core 1.5 Sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable and one single core 1.5 Sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable as earth continuity to common earth and connecting to earth dolly running in and including PVC casing & caping (ISI marked) of suitable size with PVC boards of appropriate sizes and all requisite accessories such as PVC elbow, Tee, collars, bends etc. with PVC terminals box & cover for mounting swtches, sockets, fan regulator etc for mounting switches, sockets, fan regulators etc complete all as specified and as directed for the following :-

One light/fan point controlled by one way switch 6 Amp complete all as specified and directed.

One 3/5 pin socket outlet 6 amp on same board complete all as specified and directed.

One 3/5 pin socket outlet 6 amp independent board complete all as specified and directed.

All as per srl item No 106 here in before but for one 3 pin socket outlet 16/20 Amp independent with two single core 2.5 Sqmm size cable as phase & neutral and one single core 2.5 Sqmm as in continuous earth wire complete all as specified and directed.

S&F ceiling rose, 3 terminal, surface bakelite 65 mm x 50mm, PVC/poly carbonate, insulated body, complete all as specified and directed.

S&F switch piano flush type 6 Amp single pole one way, (ISI marked), complete all as specified and directed.

S&F socket outlet 2 in 1, 5 pin, 6 Amp flush type universal, complete all as specified and directed.

S&F Switch socket combination, 5 pin, 5 Amp flush type universal, complete all as specified and directed.

S&F Switch socket multipurpose combination 2 in 1, 5 pin, 5 and 15 Amp flush type universal, complete all as specified and directed.

S&F Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.

Supply and fixing in repair inverter LED lamp, CDL 12 watt, B22 base, complete all as specified and directed.

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. for 1200 / 1400mm sweep, complete all as specified and directed.

Supply and fixing in repair inverter LED batten 1x 20W, with square profile and polycarbonate channel, lithium iron battery with charging time of 8 to 10 hours and backup tile upto 04 hours with driver, holder incl LED tube light connecting up with with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. all as specified and directed.

Supply and fixing in repair LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver including suitable bracket fixed to wall/ pole complete with IP 65/66 protection complete all as specified and directed.

S & F in replacement of BLDC ceiling fan complete with blades of capacity 1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE, 5 star rated, 230 V, 50 Hz with all connecting accessories, complete all as specified and directed.

S&F in repair sheet metal enclosure for DBs, vertical TPN double door (IP43), 4 ways built in bus bars suitable for 415 volts, AC, 50 Hz and suitable for FP MCCB as incommer and out going SP/TP MCBs complete all as specified and directed. Note:- MCBs shall be measured and paid separately.

S&F in repair geyser of capacity 25 ltrs 5 star rated ISI marked horizontal storage type including all accessories such as safety valve, thermostate, NRV, connection pipes etc including making good and matching existing surface and finish complete all as specified and directed.

S&F in repair single pole and neutral enclosure with a two pin and metal earth plug and socket complete with & incl one single pole MCB of 20 Amps complete all as specified and directed.

Taking out old unsv exhaust fan from site and replacement of exhaust fan, steel body AC single Phase. 230V of size 450m sweep with, blades, and frame and louvers incl all connecting accessories complete all as specified and directed by Engineer-in-charge.

S&F in repair sheet metal enclosure for DBs, SPN double door (IP43), 12 ways with 200 amps rated bus bar suitable for 240 volts, AC, 50 Hz, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning complete all as specified and directed.

S&F in repair MCCB TPN, 3 Pole, 415 V, fixed type, 25 to 100 Amps with breaking capacity 10 KA complete all as specified and directed.

S&F in repair MCB SPN 40-63 amps 415 volts 10 KA 'C' series, complete all as specified and directed.

S&F in repair MCB single pole 6 to 32 amps 240 volts 10 KA 'C' series complete all as specified and directed.

S&F Earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 3 of 2009 SSR Pt-I and testing complete including earth work in any type of soil, PCC 1:2:4 type B-1 as in earthing pit and cover 50mm thick reinforced with 6mm dia MS round bar @ 10cm C/C both way and MS frame, common salt, charcoal and testing on completion including dismantling unsv earthing, complete all as specified and directed.

S&F Sub main wiring with single core cable 2x 6 Sqmm FRLS insulated unsheathed stranded copper conductor cable 1100 Volts grade including surface PVC casing caping medium grade alongwith 1x 6 Sqmm FRLS insulated unsheathed copper conductor cable as earth wire connected with main earth dolly, complete all as specified and directed. Note:-Three wire of 6 sqmm and one run of PVC conduit/casing caping shall be measured as one unit.

Supply and laying in trenches/on floor/pole or under road/culvert 1100 volts grade armoured, heavy duty XLPE electric cable with aluminium conductor of size 25 Sqmm 4 core, incl taking out old unsv cable, complete all as specified and directed.

Supply and laying in trenches/on floor/pole or under road/culvert 1100 volts grade armoured, heavy duty XLPE electric cable with aluminium conductor of size 16 Sqmm 2 core, incl taking out old unsv cable, complete all as specified and directed.

S & F in repair LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size., complete all as specified and directed.

M/S BADRI NATH GUPTA (BID ID -3156337)