Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.3 LAccepted-AOC 0 0 MOH SITARGANJ PIPRI POST UKHLI KATRA SHAHJAHANPUR UTTAR PRADESH 242301 SHAHJAHANPUR SHAHJAHANPUR UTTAR PRADESH 242301 | SHAHJAHANPUR | UTTAR PRADESH | 242301 | L1 | Accepted-AOC L1 | |
| 2 | L2₹14.3 L+₹2.0 L (16.2%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | L3₹14.4 L+₹2.1 L (17.0%)Rejected-AOC | L3 | Rejected-AOC L4 | |
| 4 | L4₹15.4 L+₹3.1 L (25.4%)Rejected-AOC | L4 | Rejected-AOC L3 |
Tender Value
₹14 L
EMD Value
₹28,000
Closing Date
14 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Bharatpur
Kanjoli line Bharatpur
Provn of certain sanction work Part-IV at Sewar fort under GE Bharatpur
2022_MES_545914_1
8191/E8
Open Tender
Civil Works
Item Rate
180 days
GE Bharatpur
as per tender document
6 documents required · 6 mandatory
₹500
GE Bharatpur
₹28,000
Yes
24 Sept 2022
17 Aug 2022
22 Sept 2022
17 Aug 2022
14 Sept 2022
31 Aug 2022
20 Aug 2022 - 26 Aug 2022
Amount
M&L for excavation in trenches n.exc. 1.5 m wide and n.exc. 1.5 m in depth, for foundation, etc, or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc. 10 sqm on plan and n.exc. 1.5 m in depth and getting out in Soft/Loose soil.
Excavation over areas, n exc 1.5m deep and getting out for soft /loose soil
M&L for plain cement concrete type D2 1:4:8 (40 mm graded aggregate) as in foundations, filling and mass concrete.
Use And waist for form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and sofits (if any) of foundation and plinth beams, and similar work; vertical or to batter rough finished flat surface of concrete.
Use and waist for formwork to sides of pillars, posts, struts, piers, columns and stanchions, rough finished surfaces of concrete
M&L for Reinforcement concrete M- 25 (20 mm graded aggregates) as in foundations, including rafts, footings, foundations beams, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete.
M&L for Reinforcement concrete M-25 (20 mm graded aggregates) as in columns, pillars, piers, posts and struts.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels cantilevers, shelves including supports, overhungs etc. also splays between floors and beams etc. as in rough finished surfaces.
M&L for Reinforcement concrete M-25 (20 mm graded aggregates) as in beams, cantileveres, bressummers, lintels over 1.5 m span.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar works not exceeding 200 mm thick (Horizontal or slopping)
Reinforced cement concrete (Design Mix M-25) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like.(Column height is upto 5.0m)
S&F mild steel TMT bars 06 to 08 mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips
S&F mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips.
S&F mild steel TMT bars 5 mm dia and over upto and including 10 mm dia in strips, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips.
S&F Rolled mild steel in Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering. Door, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete using FE-410-W (Gde- E-250.
S&F Welded steel wire fabric supplied and fixed complete to steel members & weight n. exc 4 Kgs per Sqm complete all as specified & directed
S&F 100 mm long butt hinges, medium weight, cold rolled mild steel.
S&F 75 mm size hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws.
M&L for removing excavated materials n.exc. 50m and depositing where directed at a level n.exc. 1.5m above the starting point in soils.
Returning filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm in soft/ loose soil.
M&L for preparing surfaces of any description over 10 cm girth or width, not otherwise described and applying two coats of synthetic enamel paint over a coat of Red oxide on new surfaces of steel or iron.
Taking down cement plaster of any description etc including racking out joints,hacking for key, scrubbing down with water all as specified
M&L for 15 mm thick rendering on fair faces of brick work or concrete burfaces in cement sand mortar 1:6 as in internal surfaces of walls finished fair even and smooth.
M&L for 15 mm thick rendering on fair faces of brick work or concrete burfaces in cement sand mortar 1:4 as in External surfaces of walls finished fair even and smooth.
5 mm thick rendering on rough faces of brick work or concrete burfaces in cement sand mortar 1:3 as in RCC surfaces of ceilling finished fair even and smooth.
M&L for two coats of cement base paint on new surfaces of walls, white or tinted including preparation of surfaces.
M & L Preparation of new plastered surface of wall including cornices, pilasters etc by brooming down and applying two coats of distemper oil emulsion white or tinted over a coat of alkali resistant priming paint wall primer with hand roller & 3 mm wall care putty (in Two Coats) complete all as specified and as directed
Demolition of brick masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings,dressed stone work and precast concrete articles all as spd and directed by Engr-in-Charge.
M&L Brick work with sub class 'B' old size bricks bricks straight or cured on plan exceeding 6 m mean radius built in cement mortar 1:6
M&L for surface excavation n.exc. (Not exceedings) 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil.
Cement Concrete Type D-2, 1:4:8 40mm graded aggregate 100mm Thick.
Supply Fine Agg (sand) for laying interlocking tiles over it (25mm thick)
M&L for 80mm thick & M-35 factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould/rubber molded, laid in required colour & pattern over 25mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge (cushion shall be measured & paid in seprate item)
M&L factory made precast PCC solid block (1:2:4) type B-1 using 20mm graded stone aggregate as in kerb stone of size 300mmx300mmx150mm setting in cm (1:4) etc complete.
M&L for Reinforced concrete pipes 300mm dia , class NP2 , laid and jointed complete with collars all as specified and directed.
M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.
M&L for Machine cut kota stone slab flooring 20-25 mm (slab shall not be less than 550mmX550mm) thick over cement screed 20 mm thick in cement mortar 1:6, laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.
M&L for Machine cut kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over cement screed 15 mm thick in cement mortar 1:4, laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. Note : Riser of steps shall be in one piece only .
M&L for PCC 1:1.5:3 type B2 using 40mm graded aggregate in mass concrerte for hume pipe including filling surrounding of hume pipe
Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for.
M&L for plain cement concrete type C2 1:3:6 ( 40 mm graded stone aggregate ) as struct the post of monkey guard ,in foundation, filling and mass concrete.
M&L for providing Square/Rectangular,raised platform of hight 20 cm below the tank and base dia min 100 MM projected by the external dia all around of tank for pvc cylendrical tank of capicity 500/1000 liters using pcc 1:3:6 type C1 using 20 mm graded stone aggregate with smooth finish including necessary form work etc.
Dismantling and taking up or down the existing unserviceable GI pipe and M&L for new galvanised steel water tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors of following sizes :- 15MM bore
20 mm bore
Disconnectingt existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hositing if required reconnecting and re-fixing in position capicity exc 250 ltr &n exc 500 litre
Disconnectingt existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hositing if required reconnecting and re-fixing in position capicity exc 500 ltr & nexc 1000 litre
GANGA CONSTRUCTION
Tulsi Enterprises
Captainkomalchaharconstructions
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .