Repair providing and fitting by way of replacement of wornout damaged components of 10000 GPH x 220 meter head HC pump set installed at pumping station Jib stage-1st (Old).

Amount

Repair / providing and fitting by way of replacement of wornout / damaged components of 10000 GPH x 220 meter head x 75 HP pump motor set installed at pumping station Jib stage-1st (Old) by way of disconnecting of all electrical connections, decoupling of pump from motor, carrying pump-motor set from pumping station to road side by way of head load and then to work shop by mechanical transportation. Providing and fitting of new pump shaft, turning and finishing to the original bearing size. Providing, fabrication and fitting of new impeller 8 numbers, fabrication /fitting of neck rings 8 nos. diffusers 4nos., shaft protection sleeve 2nos., gland plate-2nos. with check nut 2 nos. Providing and fitting of new bearings 7308-2nos. and N308-1no. Providing fabrication and fitting of new tie bolts with nuts. Repair to suction and delivery side by drilling and taping. Carriage of pump set back to pumping station by using manual labour tools and tackles and mechanical transport Repair to motor starter by replacement of all moving contacts and fix contacts, overload coils, no volt coils ,bakelite and providing and filling 10 liters transformer oil to the starter. Coupling pump motor set and making proper alignment and testing the pump set on load at site. Providing and fitting of nuts and bolts and leather flanges at delivery and suction side. Replacement of damaged nuts, bolts and rubber bushes. Complete job includes cost of material, labour charges including to and fro carriage / transportation charges.

AADISHWAR ELECTRICAL AND MECHANICAL WORKS (BID ID -2329273)

Vaibhav Engineers and Technocrates (BID ID -2329317)