REPAIR TO SUNKEN FLOOR, DADO, SOIL WASTE VENT AND WATER SUPPLY PIPES, SANITARY FITTINGS, PLUMBINGS INCLUDING CLEANING OF OHTSs IN C2B AREA AND REPAIR TO COMPOUND WALL, FENCING, CONCERTINA COIL, DRAINS, CULVERTS AND MISC B/R ITEMS AT C2A AND C2B AREA

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises.

M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified.

M&L for coloured Glazed ceramic tiles on vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick backing coat of cement mortar in 1:4 complete all as specified.

M&L for light shade vitrified ceramic tiles 10mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortar 15mm thick in CM 1:4.

S&F Dark shade Vetrified Ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortar 15mm thick in CM 1:4.

Demolition of concrete of any description and in any position not otherwise specifically provided for as in sunken floor etc. complete all as specified.

M&L for Providing cement concrete M-15 grade (Nominal mix) using 12.5mm graded stone aggregate in padding in sunken slab concrete to achieve proper slope including cutting holes in bricks or RCC for spout pipe complete all as specified & directed by Engr-in-Charge.

M&L for PCC M-5 grade (Nominal mix) using 40 mm graded stone aggregate as in filling in sunken floor.

M&L for providing damp proof layer in two coats of acrylic polymer coating consisting of 1 part of acrylic polymer liquid mixed with 2 parts of cementious powder applying at the rate of 1.40 Sqm/ Kg of mix per coat. Second coat should be applied after 4-6 hrs of first coat, 5 days curing is to be carried out to the surface before providing plastering. Make of the material :Smart Care damp block 2K' of Asian paints or equivalent from Dr Fixit, STP, CICA etc. as approved.

Demolition of brick work or stone boulder masonary built in cement mortar including all quoins arches pillars etc. but excluding ashlar facing dressed stone work and precast concrete articles.

M&L Brick work with old size fly ash bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6.

Taking down cement or cement lime plaster on brick or stone walls, etc. including racking out joints,hacking for key,scrubbing down with water, etc complete.

M&L for rendering 5 mm thick on ceiling surfaces in cement mortar 1:3 finished even & fair all as specified and directed.

M&L rendering 15mm thick (10mm + 5mm) plaster on fair face of brick work in CM 1:4 and surface finished even and fair by mixing liquid water proofing compound as per manufacturers instructions complete. Note :- Liquied WPC shall be measured & paid seprately under relevant item of this BOQ.

Supply only liquid water proofing compound hydroseal-W+ / Dr Fixit or eqivalent (for plaster hardening, to contol efflorescence & fungal growth) as approved by GE.

M&L for Rendering 15 mm thick on other than fair faces of brick surfaces or concrete surfaces and finished surfaces even & smooth in CM 1:6 complete.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.

M&L for preparation of new plastered surface of wall and applying two coats of Oil Bound Distemper on wall complete all as specified and directed by Engineer-in-Charge.

S&F in repairs high density polythene pipe 32 mm (HDPE) of pressure @ 6 Kg/Sqcm laid in trenches/wall

S&F in repair 75 mm dia PVC floor trap plain with grating including jointing with solvent cement complete all as specified.

M&L for 150mm x 150mm Salt-glazed stoneware gully traps, square or round mouthed, tvpe 'P' and setting and jointing in cement mortar 1:1 complete all as specified in repairs.

S&F in repair 110mm bore PVC (SWR )vent cowl complete all as specified.

S&F in repair 110 mm dia PVC (SWR) bends any radius with oval access door complete all as specified.

S&F in repair 75 mm dia PVC (SWR) bends any radius complete all as specified.

S&F in repair 75 mm dia PVC (SWR) bends with access door any radius complete all as specified.

S&F in repair 110 mm dia PVC(SWR) plain bends any radius complete all as specified and directed.

S&F in repair PVC (SWR) junction single Y bore 110 mm complete all as specified and directed.

S&F in repair PVC (SWR) junction single Y with access door bore 110 mm complete all as specified and directed.

S&F in repair 75 mm dia PVC (SWR) pipes type 'A' single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified.

S&F in repair 75 mm dia PVC (SWR) pipes type 'A' single socketed in any length with rubber ring joints fixed to walls with suitable MS clamps complete all as specified.

S&F in repair PVC (SWR) 110 mm dia pipes type 'A' single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified.

S&F in repair PVC (SWR) 110 mm dia pipes type 'A' single socketed, in any length with rubber ring joints, fixed on walls with suitable MS clamps complete all as specified.

Taking up or down 15mm bore steel tubing and connections, complete all as specified and as directed

Taking up or down 20mm bore steel tubing and connections, complete all as specified and as directed

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth of brick walls complete all as specified.

S&F 16mm CPVC Pipes SDR II & special fittings (brass elbow brass Tee male threaded brass adeptor female threaded brass adeptor etc) on walls medium grade with & including all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engr-in-Charge.

Supplying & fixing to walls and ceiling 20 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed.

S&F in repair 15mm size bib taps cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete.

S&F in repair 15mm size bib taps with wall flange cast copper alloy, chromium plated, fancy type, screwed down, screwed for iron pipes 15mm bore complete.

S&F in repair Single Lever Basin Mixer without pop-up waste with 450mm long braided hoses complete.

S&F in repair Basin pillar cock with 450mm long braided hose complete.

S&F in repair Wall mixer 3-in-1 system with provision for both, Hand Shower & Overhead Shower complete with 115mm long Bend pipe, connecting legs & wall Flange.

S&F in repair 15mm size angular cock, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed both end for iron pipes complete.

S&F in repair 15mm size angular stop cock with wall flange, cast copper alloy, chromium plated, fancy type.

S&F in repairs concealed stop cock size 15mm, reduced body with adjustable Wall Flange.

S&F in repair Towel Rail 600 mm long complete all as specified and directed.

S&F in repairs plastic water closet seat cover white closed pattern with flat bottom and cover incl mild steel chromium plated hinging devices complete.

S&F in repairs Viterous china squatting pan, Órissa' pattern, size 580 x 440mm white, with integral foot rests including connection and fitting to trap, and to flushing pipe complete and making good to wall or floor tilling to match the existing complete all as specified.

S&F Vitreous China Urinal, Half stall type white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified.

S&F in repairs flush handle PVC with adjustable lever and hook for low level flushing cistern complete.

S&F in repairs PVC syphon complete for low level flushing cistern complete all as specified.

S&F in repair 15 mm size two way angle cock cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete.

S&F in repair Health faucet of superior quality ABS body with 8 mm dia 1.2 m long flexible tube and wall hook including fixing complete all as specified and as directed. Make : Cera paryware etc.,

S&F in repair waste coupling of 32 mm size chromium plated for glazed ware sink basins, etc with long screwed shanks and fly nuts flanges end bedded in red lead cement and other end fixed.

S&F in repair waste coupling of 40 mm size brass chromium plated for sink , etc with long screwed shanks and fly nuts flanges end bedded in red lead cement and other end fixed.

S&F in repair 450 mm long PVC connections 15 mm size with PTMT nuts at both end complete.

S&F in repair stainless soap dish fixed to wall complete all as specified and directed.

S&F in repair 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 g ms) complete.

S&F in repairs mild steel chromium plated grating (round) 100mm dia fixed over floor/nahani trap (with hole/without hole) complete all as specified.

Supply and fix in repair 500 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete.

Supply and fix in repair 1000 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete.

Cleaning of HDPE tank of capacity up to & including 500 Litres by Flushing out water cleaning & removing of sludge, scale mud etc from wall & floor by rubbing with brushes, cleaning with caustic soda etc complete & finally washing with fresh water, including writing date of cleaning with white synthetic enamel paint and removing sludge, scale mud etc to a distance not exceeding 50 metre and depositing complete all as directed.

Cleaning of HDPE tank of capacity exc 500 Litres but n. exc 1000 litres by Flushing out water cleaning & removing of sludge, scale mud etc from wall & floor by rubbing with brushes, cleaning with caustic soda etc complete & finally washing with fresh water, including writing date of cleaning with white synthetic enamel paint and removing sludge, scale mud etc to a distance not exceeding 50 metre and depositing complete all as directed.

S&F in repair 20 mm dia Gun metal, globe or gate valves,with iron wheel head,including making thread to both ends of pipes for fixing,screwed both ends for iron pipes and fixed.

S&F in repair Vitreous China wash basin, white, flat back, size 580x450x 200mm rectangular shape (for Hospilal use) including brackets complete all as specified and directed.

S&F in repair 15-20mm (out side dia-20 mm) GI reducer.

S&F in repair 20 mm bore GI Union complete.

S&F in repair 20 mm bore GI Elbow complete.

S&F in repair 20 mm bore GI socket complete.

S&F in repair 15 mm bore GI Tee complete.

S&F in repair 15 mm bore GI Union complete.

S&F in repair 15 mm bore GI Elbow complete.

S&F in repair 15 mm bore GI socket complete.

S&F in repair 15 mm bore 125 mm long Nipple

S&F in repair 15 mmbore 100 mm long Nipple

S&F in repairs GI nipple fully threaded with two numbers check nuts and washers for PVC tank, 100mm long to PVC tank with back nut and washers for inlet and outlet pipe of following sizes :

15mm bore

20mm bore

S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers & wastes; including bedding in CM on to dwarf wall or including fixing cantilever brackets & connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers & waste; including bedding in CM to dwarf wall or including fixing cantilever brackets & connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete.

S&F in repair PTMT extension Nipple 15mm bore. (min. weight 15mm-18gms)

S&F in repair wash basin mixer 15mm bore all as specified. Make : Jaquar cat no: FUS-29005B or equivalent make given under list of makes.

S&F in repair sink mixer 15mm bore single lever all as specified. Make :- Jaquar cat no: FUS-29165 or equivalent make given under list of makes.

S&F in repair wash piller cock 15mm bore all as specified. Make :- Jaquar cat no: FUS-29001 or equivalent make given under list of makes.

S&F bottle trap with fully casted body (with internal partition) 32mm with 190mm & 125mm long connecting pipes & wall flange complete all as specified of Make :- Jaguar - cat No ALE-ESS-773AL 190 x 125 or equivalent.

Dismantling of existing roof treatment consisting of screed, tar felts etc, and removal of dismantled materials complete all as directed and as specified

Demolition of existing roof treatment of any description including cement / mosaic tiles, lime/cement concrete, of any thickess including plaster, in any position and removing demolished material/debris to a distance exc 500 mtr and n exc 1500 mtrs all complete and all as specified.

M&L for Providing, cement concrete M-15 grade (Nominal mix) using 12.5mm graded stone aggregate in coping, coving, roof padding, padding in sunken slab as directing mixed with liquid water proofing compound.

M&L for 10 mm thick bedding layer in cement mortar 1:3 using water proofing compound @ 3% by weight of cement or as per manufacturers instructions, on roofs to receive water proofing treatment finished even and smooth without using extra cement all complete and all as specified .

M&L for preparation of RCC roof surfaces with wire brush drying and cleaning to remove all foreign materials and washing with water to remove loose particels.Filling the cracks by crack filler at the places. Wherer slope is not proper of roof surface is uneven to maintain the proper roof slope. Providing 10 mm thick polymer modified plaster in ratio 1:10 (1 part of polymer and 10 parts of cement with solid contents not less than 30% over slab and applying priming coat of epoxy primer with resin and haerdener with water duilution as per manufacturer instructions,applying 1st coat if solvent based polyurethane liquid membrane not less than 500 micron thick UV stable having SRI value greater than equal to 105 with consumption of 0.61 kg/Sqm and applying 2nd coat solvent based polyurethane liquid membrane not less than 500 micron thick UV stable having SRI value greater than liquid to 105 with consumption of 0.61 kg/Sqm over dried 1st coat complete all as specified and directed. Make : Asian Paints/Pidilite/STP/Thermax/Sikka /FOSROC/DR FIXIT/Torchtar Membranes & bitumen Products Pvt Ltd.

M&L chipping of unsound/ deteriorated up to 50mm average thickness from slabs, beams,columns,chajja etc with manual chisel including tapering of all edges including cleaning of exposed concrete surface and reinforcement with wire brushes etc and disposal of debris as directed.

Identifying and marking carefully the damaged reinforced concrete by tapping with light hammer and chipping of unsound weak concrete and plaster material from slabs/beams/columns etc. with power/hand driven chisel as directed by the engineer-in-charge upto 40 mm average depth including saw-cutting of all edges making square shoulders of the cavities all as specified and as directed. Note :- (i) All loose unsound and cracked concrete shall be removed out side MD land. (ii) Thickness will be measured excluding plaster

Identifying and marking carefully the damaged reinforced concrete by tapping with light hammer and chipping of unsound weak concrete and plaster material from slabs/beams/columns etc. with power/hand driven chisel as directed by the engineer-in-charge upto 60 mm average depth including saw-cutting of all edges making square shoulders of the cavities including complete all as specified and as directed. Note :- (i) All loose unsound and cracked concrete shall be removed out side MD land. (ii) Thickness will be measured excluding plaster.

Cleaning loose concrete if any all around reinforcement including from behind the reinforcing bars to give an average 10 mm thick (but not less than 10 mm clear air gap) and cleaning reinforcement of total rust using alkaline rust remover with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washed with water and allowing it to dry complete all as specified and as directed. Note : - (i)Length of reinforcement bars cleaned of rust all around will be measured for payment. (ii) Thickness will be measured excluding plaster.

Applying two coats of epoxy based passivating, protecting & bonding coat of zinc rich system (Nitozinc (R) primer of Fosroc and equivalent of SIKA/Dr Fixit Pidilite/ Krishna Conchem) as approved by the Engineer-in-Charge for old and new reinforcement any dia complete all as specified and as directed. Note :- Epoxy based passivating, protecting & bonding coat of zinc rich system will be paid for separately.

Supply only epoxy based passivating, protecting & bonding coat of zinc rich system (Nitozinc (R) primer of Fosroc and equivalent of SIKA/Dr Fixit Pidilite/ BASF) as approved by the Engineer-in-Charge. Note :- Payment will be made for the total weight of resin and hardener in manufactured specified proportion.

Mixing and applying SBR latex modified cementitious bond coat using cement 2.2 kg per square metre on prepared concrete surfaces of parent material complete all as specified and as directed. Note :- SBR latex will be paid for separately.

Mixing and applying SBR latex modified cement mortar 25 mm thick in cement sand mortar in proportions of 1:3 (1 cement and 2 graded quartz aggregate) with polymer admixed in proportions as approved, including trowelling with wooden tools on prepared concrete surfaces of parent material complete all as specified and as directed. Note :- Acrylic polymer will be paid for separately.

Supply only approved SBR latex from FOSROC/BASF/DR FIXIT/ SIKA for bonding coat/Polymer modified cement mortor. Note: Rate will be in terms of solid contents of polymer.

M&L for providing and placing in position micro-concrete, grade M40, which shall be cement based prepacked single component, chloride free, non-shrink, free flow, self compacting, ready to use after mixing water in specified proportion, obtained from Fosroc / SIKA / BASF/ Dr Fixit, thickness of section upto 75 mm complete all as specified and as directed by the Engineer in charge. Note :- Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument.

Dismantling fencing wire mesh any type

Dismantling posts or struts (Wood, Steel or RCC) any section, including Taking out embedded portion making good disturbed ground, posts embedded in concrete, brick work,masonry,etc. complete all as directed .

Dismantling posts or struts (Wood, Steel or RCC) any section, including Taking out embedded portion making good disturbed ground, posts embedded in natural ground complete all as directed .

M&L for cement concrete type M-10 grade (Nominal mix) using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified.

Supply only chain link fencing made out of mild steel galvanised wire as specified and directed.

Fixing only chain link fencing of description fixed to steel post with mild steel flat & nut bolt etc. Note: (i)Supply only fencing will be measured and paid separately. (ii)Supply and fix mild steel nut bolt and flat will be measured and paid separately.

Supply and fix mild steel section for Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts for post and struts for fencing including cutting top to shape as directed drilling hole notching for wire etc.or flat iron fillet (for securing wire mesh etc)including all necessary drilling bolting,using steel section of grade E-165 ( Fe-290)complete.

Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long & dia of shank 5 mm to 10mm long.

Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long & dia of shank 11 to 15 mm long.

Supply and fix 10 mm dia mild steel round bar as in line wire for chain link fencing fixed with GI wire all as specified for 410 W or Fe-290 Gde-165

Dismantling wrought iron or mild steel work of any description not otherwise provided for

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

M&L for preparation of new steel surfaces of any description and applying two coats of synthetic enamel paint over a coat of zinc chromate primer complete all as specified.

Excavating in trenches n.exc 1.50m wide and 1.50m deep for foundation of wall etc and getting out in hard dense soil.

Returning, filling in including spreading leveling, watering and wall ramming in layers not exceeding 25cm in soft /loose soil complete all as specified and directed.

Removing excavated material exc 1.50 km but not exc 5km and depositing where directed.

M&L PCC M-15 grade (Nominal mix) using 20mm graded stone aggregate as in coping etc. complete all as specified and directed.

M&L for providing Providing type M-15 grade (Nominal mix) using 12.5 mm graded aggregate as in precast cement concrete louvres and jallies, 25mm thick (mea sured solid), including all mould- ings but excluding frame set in cement mortar 1:4 complete all as specified

M&L for rendering 15 mm thick on brick wall or concrete surface in cement mortar 1:4 finished even & fair all as specified and directed.

M&L for preparing newly plastered surfaces of wall and applying two coats of weather proof acrylic exterior paint (100% Acrylic) including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.

M&L for preparing old plastered surfaces of wall and applying one coat of weather proof acrylic exterior paint (100% Acrylic) including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.

Taking down and refix the old chain link fencing with old flat iron nut bolt etc of any size of mesh and any weight.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.laid bedded and pointed in any mortar.

M&L for non skid coloured cermic ENDURA tiles n. exc. 0.11 Sqm 10 mm thick set and jointed in neat cement slurry & pointed with coloured cement to match in floor over & including 15mm thick screed bed in CM 1:4.

M&L sand filling under floors including consolidation complete for laying paver blocks.

M&L 100 mm thick PCC M-7.5 grade (Nominal mix) using 40 mm graded stone aggregate as in sub base

M&L for Chequred Cement concrete coloured tiles glossy finish, rubber moulded with grey cement and pigments 30cm x 30cm x 25mm thick, machine pressed, set jointed and pointed in neat cement slurry in floors, with and including 20 mm thick screed bed in CM 1:4 all as specified and as directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade made with grey cement and pigment complete all as specified and directed.

Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete) of any type and size, set in cement mortar, in foul position.

M&L 300mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed.

M&L 450mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed.

Concrete bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested in cement concrete type M-10 garde (Nominal mix) using 40mm graded aggregate 300mm dia pipe

M&L for PCC M-10 garde (Nominal mix) using 40mm graded stone aggregate as in foundation & mass filling complete.

M&L for PCC M-15 grade (Nominal Mix) using 20mm graded stone aggregate Providing, cement concrete in roof kerbs benching channel or mud stops, rounded or chamfered on edges finishing even and smooth without using extra cement complete all as specified and directed.

M&L for PCC M-10 grade (Nominal mix) using 20 mm graded stone aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed.

M&L for forming fair finished drain or channel 50cm in inner girth in CM concrete extra cement in including form moulds mitred/stopped ends etc.

M&L for rendering 10mm thick on concrete surfaces in CM 1:4 finished even and smooth.

SHRI RADHAYSHYAM JHA

M/s Hoti Lal Contractor

R N AGRAWAL