GE/BAS-66/2023-24 Repair and maintenance of street light timer LT panel bus bar and high mast light and its allied services at Basoli and Janglote under GE Basoli

Amount

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5mtr in depth for foundation of pole and laying of UG cable and getting out in any type of soil complete all as specified and directed.

Returning filling in and including spreading, levelling, watering and well ramming in layers not exceeding 25cm completed all as specified and directed.

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5M above the starting point complete all as specified and directed.

M&L for PCC (1:2:4) type B-2 using 40mm graded crushed stone aggreghate for foundation of poles and stay assembly complete all as specified and directed.

Supply and Laying in trenches or passing through pipe or fixing to pole/wall UG cable XLPE 16 sqmm 4 core, PVC insulated,armoured heavy duty electric cable with aluminum conductor,1100 Volts grade, complete all as specified and directed. Note : (I) Earth work/ sand cushioning shall be measured and paid separately .

Taking out the old unsv cable in trenches or passing through pipe/fixed to pole/ wall XLPE insualted any size/core armourned heavy duty electric cable and removing from site complete all as specified and directed.

S&F DWC high density polyethelene pipes in replacement having 63/50outer dia mm, inner as per site requirement having corrugation on the wall and plain surface on the inner wall conforming to IS: 14930(Part I & II) for protection of underground cable laid along pole/along wall/in PCC on GL/roof and including all fittings as required at site complete all as specified and directed.

S&F structural steel work conforming to grade Fe-410S as in cross arms, bracing, supports, clamps and back plates fabricated from structural steel sections, including , nuts, bolts, washers, welding , bending cold or hot drilling holes for bolts in any shape or size as indicated or directed and inclusive of one primer coat, one under coat , one finishing coat of aluminium paint and epoxy coating, including taking down old corroded structural steel complete all as specified and directed.

S & F of Street light control panel three phase, 430 volt of contractor size 32 Amp TP for maximum load 6 KW astronomical type confirms to IS /IEC60947-4-1 with protecion IP-54, suitable for outdoor installation. Control panel having extended wide bad coil & FRLS internal wiring suitable size. In built short circuit protection should be prrvided and complies with Class H insulation. All components (i.e Astronomical timer, contractor, MCB & panel should be same OEM) complete all as specified and directed

S & F of Street light control panel three phase, 430 volt of contractor size 65 Amp TP for maximum load 12 KW for maximum of astronomical type confirms to IS /IEC60947-4-1 with protecion IP-54, suitable for outdoor installation. Control panel having extended wide bad coil & FRLS internal wiring suitable size. In built short circuit protection should be prrvided and complies with Class H insulation. All components (i.e Astronomical timer, contractor, MCB & panel should be same OEM) complete all as specified and directed

Supply and fix in repair / replacement LED street light fitting of capacity 45 Watt energy saving & environmental friendly long life versatile pressure die cast aluminium with ptotection IP66 and impact reistance of IK07 with high power LEDs as light suorce with electronic chip and driver efficacy 100 Lm/W 5700 K suitable for pole dia 54mm(max)complete all as specified and directed

Supply and fix in replacement LED street light fitting of capacity 60 Watt energy saving & environmental friendly long life versatile pressure die cast aluminium with ptotection IP66 and impact reistance of IK07 with high power LEDs as light suorce with electronic chip and driver efficacy 100 Lm/W 5700 K suitable for pole dia 54mm(max)complete all as specified and directed

Supply and fix in replacement flood light of capacity 50 Watt energy saving & environmental friendly long life versatile pressure die cast aluminium with ptotection IP66 made out pressure die cast aluminium housing suitable lens & toughened glass with high power LEDs as light source with electronic chip and driver complete all as specified and directed

Supply and fix in replacement flood light of capacity 60 Watt energy saving & environmental friendly long life versatile pressure die cast aluminium with protection IP66 made out pressure die cast aluminium housing suitable lens & toughened glass with high power LEDs as light source with electronic chip and driver complete all as specified and directed

Supply and fix in replacement flood light of capacity 150 Watt energy saving & environmental friendly long life versatile pressure die cast aluminium with protection IP66 made out pressure die cast aluminium housing suitable lens & tughened glass with high power LEDs as light source with electronic chip and driver of complete all as specified and directed

Supply and fix in replacement flood light of capacity 200 Watt energy saving & environmental friendly long life versatile pressure die cast aluminium with ptotection IP66 made out pressure die cast aluminium housing suitable lens & toughened glass with high power LEDs as light source with electronic chip and driver of complete all as specified and directed

Supply and fix in replacement for junction box of size 300x250x150mm made out of 1.6 mm thick CRCA sheet powder coated front hinged door with openable and self closing arrangements including aluminium bus bar 3 Phase 4 wire system of size 20mm x 5mm fixed on SMC/DMC insulators and cable entry glands for connections and MCB SP 6 Amps-01 No all as required and fixed to poles with MS clamp made out of MS flat iron of size 25x5mm and including nuts, bolts and washers complete all as specified and directed.

Disconnecting electrical connection of high mast light of 13 mtr long and taking out high mast light pole including all accessories and relocated other site as per ground requirement alongwith all accessories such i.e nuts, bolts, washers & struts etc including transpotation if required complete all as specified and directed by Engineer-in-Charge. Note:- Excavation & PCC shall be paid separately.

KALSI CONSTRUCTION CO

G.M. ENGINEERING SERVICES

kailu construction co

Ms International Engineers

Substantial Const. Co.

BALKRISHAN GUPTA AND SONS

M/s Northern India Construction co

M/s. Aggarwal Engineers

M/S HIMANSHU BUILDERS