08/SE/EWC/AYO/2024-25

Amount

Safe Loading, Carriage and then safe unloading of the following material from Store Centres Under the jurisdiction of EE ESD Ayodhaya to dump site proper stacking.

M.S. Top Channel 125x65 mm 3200 mm

33 KV Pin Insulator polymer type

ACSR Dog Conductor

33 KV Cable 3x300 mm XLPE

33 KV Straight through jointing kit indoor 3x300 sq.mm. XLPE

33 KV cable jointing kit outdoor 3x300 sq.mm. XLPE

Stringing, sagging, binding and Jumpering of ACSR Dog conductor. 3 Phase of 33 KV Line including fixing, mounting of P.G.clamp suitable for Dog Conductor at sectional point. (Contractor shall provide necessary PG clamps etc)

Earthing by way of boring and lowering the "B" class GI pipe of 55 mm dia from ground upto water level not less than 20 mtr. As per standard practice . The G.I pipe which laid down below the railway crossing will be connected with G.I strip 50x6. (All material will be supplied by the contractor)

Laying & Dressing of 3x300 sq. mm XLPE Cable underground Double Circuit. Laying of double circuit 3x300 sq .mm XLPE Cable in normal soil by digging of trench 1050 mm deep, 750 mm wide including supply of required materials, as 1st class Bricks, Stone slabs and fine sand. Providing 150 mm fine sand cusion beneath, and 150 mm sand cusion above the cable. The cable shall be duly protected by Bricks, sand and stone slab. The inter axial spacing between two cables should be in between 0.25 to 0.04 M. After laying the cable refilling and ramming of the left out soil,closing the trench and leveling.

Installation of Heat Shrinkable Type cable jointing kits of following types/sizes for 33 XLPE Cable.

(a) Fixing of 33 KV 3x300 sq. mm Straight Through joints. (jointing kit supplied by dept.)

(b) Fixing of 33 KV 3x300 sq. mm Outdoor End Terminations (jointing kit supplied by dept.)

High Pressure testing to which 33 KV Line & cable to be stand for duration of 5 minutes after completion of Laying, Stringing, sagging, binding and Jumpering of ACSR Dog conductor. ( Testing equipment will be arranged by the contractor)

Hoisting of 33 KV Cable on existing/erected support with provision of MS Pipe 150 mm dia 3 mtr long suitable for 3x300 sq mm cable fixing of proper support and its clamping, providing long barral lugs 6 nos and P.G. Clamps & "Y" shape jumpering properly and 02 nos. supporting angle 65X65X6, 2240 mm long and making connection including supply of jumpering cable ,mounting clamps as per RESSPO Norms. (All material will be supplied by the contractor like M.S Pipe , P.G. Clamps, And Supporting Angle 65X65X6, 2240 mm and jumpering cable suitable for 33 KV jumper).

Fabrication, Erection and grouting of route marker and marking 33 KV line by painting after grooving on the stone. (Contractor shall provide all materials)

Laying of cable through HDD method Laying of Double circuit 33 KV 3x300 Sq mm XLPE cable through drilling method . The cable be laid at the depth asper norms from the under surface.(Around depth of 1 mtr)

Providing of G.I Pipe 6" Dia B class pipe

Laying of cable & G.I Pipe Laying of Double circuit 33 KV 3x300 Sq mm XLPE cable and G.I Pipe by drilling method . The cable be laid at the depth of 3 mtr from the under surface in G.I. pipe (200 mm. dia.) casing.

restoring the road as it is before after completion of work

Providing and fixing of M.S Top chanel 125x65 3200 mm (All the material will be provided the Contractor like nut ,bolt clamps etc)

Providing and fixing of Aluminum Barrel Lug

Providing and fixing of Polymer Pin insulator type (All the material will be provided the Contractor like nut ,bolt clamps etc)

Inspection Pit will be digged as per the direction and supervision of JE/AE/EE.

Hindustan Electric Work

M/S R.G. TRADERS