REPAIR/MAINT TO KERB STONE, CLADDING TILES, SEATING AREA ALONGTHWITH MISC B/R REPAIR AT BEG AND CENTRE UNDER AGE B/R-II IN GE (CENTRAL) KHADKI.

Dismantling Single or double layer Mangalore pattern or similar tiles on ridge/roofing complete all as specified and as directed.

Supply and fix roof tiles , Mangalore Pattern, inter locking at side joints laid dry complete all as specified and as directed.

Description all as per item No 2 above but (except) Mangalore tiles complete all as specified and as directed. NOTE :- Material shall be used from dismantling

Supply and fix ridge or hip tiles to suit Mangalore Pattern of roofing tiles bedded and jointed in CM 1:6 complete all as specified and as directed.

Description all as per item No 4 above but (except) Mangalore tiles complete all as specified and as directed. NOTE :- Material shall be used from dismantling

Dismantling of plain or corrugated sheeting any gauge thickness including Nainital or similar pattern as in roof covering complete all as specified and as directed.

Supply and fix 0.63mm thickness Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts and washers, in roofs(in any position and bent to any radius curve), walls etc. with grade of zinc coating 275 etc complete all as specified and as directed.

Supply and fix for plain, galvanised mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashing (length and girth as fixed) by using 1.00mm thick sheet grade of zinc coating @120 Gms/Sqm both sides and welded or soldered joints are provided complete all as specified and as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles and removing the debris outside the defence land complete all as specified and as directed.

Material and labour Brick work with fly ash old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 in any position, complete all as specified and as directed.

Material and labour for 15mm thick rendering on fair faces of concrete surfaces in CM 1:4 finishing even and smooth without using extra cement complete all as specified and as directed.

Material and labour for 15mm thick rendering on fair faces of concrete surfaces in CM 1:6 finishing even and smooth without using extra cement complete all as specified and as directed.

Dismantaling timber in scantling 40 sq.cm and over in section in any position and any description unframed wk or unframed work.

Supply and fix timber work second class hard wood clean sawn in scantlings, complete all as specified and directed.

Dismantaling battens for tiles ,singles etc of any size including tiling fillets spaced exc.15 cm complete all as specified and as directed.

Dismantling timber scantlings in fillets, rails, posts, rafters, purlins etc under 40 sq. cm in section (Unframed work) in any position complete all as specified and as directed.

Supply and fix for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410 -W (Gde-E- 250) quality-A etc complete all as specified and as directed.

Supply and fix for gypsum reinforced boards 595x595x8 to 10mm thick for ceiling on Hot dipped Galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 4mm dia to be fixed by approved rawl plug, level and justers and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm center to form 1200x600mm modules cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross Tee centrally between the 1200mm cross tee. Tee, Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture instruction including taking down old/existing ceiling boards of any type (fibre, pulp insulation etc) or insulation boards any thickness incl fillets complete all as specified and as directed.

Taking down chowkhat or frame n. exc 1.5 Sqm each but with shutter (without taking off shutter from the frame) complete all as specified and as directed.

Taking down chowkhat or frame exc. 1.5 Sqm but n. exc 4 Sqm each but with shutter (without taking off shutter from the frame) complete all as specified and as directed.

Supply and fix aluminium powder coated window sliding type (3 track) with frame size 100x35x1.2mm thick and shutter frame size 39.40x17.70x1.2mm thick with and including two glass shutter and one mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 4mm thick tinted float glass and 0.36mm dia apperture 1.4mm SS wire mesh and fittings etc complete all as specified and as directed.

Supply and fix powder coated aluminuiim partitions wall including anchorage rod, aluminium cleats, drilling, punching, plastering, and making good to the existing surfaces and comprising of following specification as directed :- (a) aluminium section of size 49.91x44.45x2.00 mm thick (b) 5 mm thick tinted glass with aluminium galzing clips and rubber beads, area not exceedings 1.5 sqm (c) 12 mm thick both side prelaminated particle baord fixed with aluminium clips and rubber beads complete all as specified and as directed.

Supply and fix for 35mm thick 2nd class HW glazed and skelton shutter, wire mesh, open rebated and prepared to receive glass, gauze, etc. (without sach bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge, etc size of shutters including wire mesh as specified in SSR-I, complete all as specified and as directed.

Supply and fix for 30mm thick flush shutter, solid core construction, with block board core plywood face panels, commercial type on both sides, chemically treated against termite infestation, complete all as specified and as directed.

Material and labour for glazed vitrified tiles double charge 7 to 8 mm thick light shade (square/rectangular) polished area of each tile 1200 mm x 600mm over and including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed.

Description all as per Ser item No 25 above but in skirting and dado laid over and incl 10mm thick rendering in CM 1:4 and pointing including dismantiling and removing the debris outside the defence land complete all as specified and as directed.

Material and labour for cement concrete 25mm thick type B-0, 1:2:4 (12.5mm graded aggregate) as in flooring complete all as specified and as directed.

Supply and fix butt hinges, 100mm long, extruded aluminium alloy with galvanised mild steel hinge pin, complete all as specified and as directed.

Supply and fix extruded brass handles, fabricated type polished 150mm long fixing with screws etc complete all as specified and as directed.

Supply and fix aluminium anodised , barrel tower bolt 200mm long, powder coated of extruded section and fixed complete all as specified and as directed.

Supply and fix aluminium alloy, anodised, sliding door bolt 250mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy 12mm dia, complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and as directed.

Supply and fix, plain sheet glass 4mm thick, ordinary quality, not exc 0.50 Sqm in each pane fixed to aluminium door/window and steel window/frame with oil putty and securing pins, spring clips etc complete all as specified and as directed.

Supply and fix in repair Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

Supply and fix Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

Material and labour for washing, rubbing down and stopping of distempered and painted surfaces of manglore tile, and applying two coats of exterior acrylic emulsion paint over one coat of exterior primer complete all as specified and as directed.

Material and labour for complete removal of existing treatement/old plastered/concrete surface from internal surface of wall by wire brushes and applying 2mm thick of Birla/JK wall care putty to obtain smooth regular/even finish using sand paper and applying two coat of oil bound distemper emulsion over a coat of primer upto height 10 mtr etc complete all as specified and as directed.

Material and labour for preparation of old plastered or unplastered surface of walls and applying two coats of cement base paint of approved tint upto height 15 mtr including necessary scaffolding etc complete all as specified and as directed.

Material and labour solid PVC Wall Lining consisting of 10 mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as as per direction of Engineer-in-Charge.

Material and labour for preparation of new or previously untreated wooden surface of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Material and labour for preparation of new or previously untreated steel surface of any description over 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Material and labour for preparing new plastered surface of walls and applying two coat of cement base paint oaver a coat of primer at any height including necessary scaffolding ladder etc complete all as specified and as directed.

Material and labour for preparing new plastered surface of walls and applying two coat of oil bond distemper of alkali resistant primer at any height including necessary scaffolding ladder etc complete all as specified and as directed.

Material and labour for 15mm thick rendering on brick /concrete surface in CM 1:4 with water profing compound finishing even & smooth without using extra cement and similar like at any height including necessary scaffolding , ladder & formwork including taking down cement plaster, raking out joints, hacking for key & scrubbing down with water and removing the debris outside defence land complete all as specifed and as directed. NOTE :- Water proofing compound shall be measured & paid separetely

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15cm thickness (below of above ground level) and removing the debris outside the defence land complete all as specified and as directed.

Material and labour for 75 mm thick plain cement concrete type D-2 (1:4:8) (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed.

Material and labour for hard core of gauge not exceeding 63 mm of broken granite stone deposited spread and levelled in layers not exceeding 15 cm watered and rammed to a true surface in sub station complete all as specified and as directed.

Material and labour for rubber moulded coloured glossy finish (Red, Yellow & Black) precast concrete interlocking paver blocks with grey cement and pigment any shape and size, shade as approved by GE, 60mm thick conforming to IS 15658-2006 M-35 grade and interstices filled with sand including 40mm thick sand cushion and including demolition of existing tiles and removal outside the MoD land complete all as specified and as directed.

Supply only Liquid water proofing compound complete etc all as specified and as directed.

Taking down copper/aluminium point wiring ( light, fan, socket, power ) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately ) and making good disturbed surface of walls, floors, etc

Material and Labour for Point wiring complete with 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLSH cable 1100 Volts grade drawn through in and including PVC casing caping of required size with all fittings and accessories alongwith green colour FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer on existing MS concealled box for mounting of switch, regulators or bell push and casing caping terminal box for mounting ceiling rose/ holders etc as specified and directed. for the following: (a) One light point /fan/Ex fan/bell point controlled by one switch

For one 3/5 pin socket outlet 5/6 Amps on the same board with other switches with cable of size 1.5 Sqmm nominal area

For one 3/5 pin socket outlet 5/6 Amps independent board with cable 1.5 Sqmm nominal area

For one 3/6 pin socket outlet 15/16 Amps independent Board with cable of size 2.5 sqmm nominal area.

Material and labour for submain wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 4.0 sqmm (Nominal area) drawn through in and including PVC conduit/casing caping with all fittings and accessories as required at site alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 4.0 sqmm as earth lead and connected to earth dolly and making good to disturbed surfaces all as specified and directed. NOTE :- (a) Two run of cable with one run of earth wire and one run of casing capping/conduit will be measured as one length.

Description all as item no 6 but for 2.5 sqmm size

Description all as item no 6 but for 1.5 sqmm size

Supply and fix 5 Amp switch Piano flush type single pole one way all as specified and as directed.

Supply and fix socket flush type 6 amps, 5 pin, 230v complete all as specified and as directed.

Supply and fix switch piano, flush type single pole, one way 16 Amp complete all as specified and as directed.

Supply and fix socket out let 2 in 1, 3 pin 6 and 16 Amp flush type complete all as specified and as directed.

Supply and fix ceiling rose surface Bakelite three terminal all incl dismantling taking down unsv one complete all as specified and as directed.

Supply and fix sheet metal enclosure SPN 08 way (MCB DB) Double door, 240 Volts AC of complete all as specified and as directed.

Supply and fix MCB DB double door 4 way ETPN with 200 Amps rated bus bar 240 volts complete all as specified and as directed.

Supply and fix MCB TPN 40-63 Amps, 415 volt 10 KA complete all as specified and as directed.

Supply and fix MCB, SPN (Double Pole) 32 amps, 240 Volts, 10 KA ‘’C” curve of complete all as specified and as directed.

Supply and fix MCB, Single Pole, 5 to 32 amps, 240 Volts, 10 KA breaking cap, ‘’C” curve of complete all as specified and as directed.

Supply and fixing LED lights fitting 1x 20W, 220V,AC, decorative box type with driver, holder incl LED tybe light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Supply and fix LED building security light 20 watt, 230V, with lens, PF > 0.95 complete with all accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI medium grade 20mm dia bracket of total length 50 cm and fixed to wall with 2 Nos MS Clamp and fastener all as specified and as directed. MAKE :- CG Cat Part No-TRP-415-20-57-SL-LM-NBK or techno commercially equivalent in Philips/Wipro.

Supply and fix in replacement wall fan 400 mm sweep, 3 speed control , PVC body 230 volts all as specified and as directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed . NOTE :- Old UNSV ceiling fan deposit to MES store

Supply and fix recess mounted LED panel, 36 watt ( 2'x2'), highly efficient suitable for celing complete with all fixing accessories and including connecting up to ceiling rose with 0.5 sqmm two core copper flexible conductor cable incl dismentling taking down unsv fitting any type all as specified and as directed. MAKE :- CG cat part no -TCR-145-36-65-SL-NWH or techno commercially equivalent in Havells/Wipro

Material and labour for PVC insulated, PVC sheathed twin core 1100 volts grade, 04 sqmm aluminium stranded conductor (incl PVC conduit/wire guard where required) complete all as specified and as directed.

Material and labour for Earthing complete with galvanised steel pipe electrode, 40 mm bore, medium grade, 3 mtr long buried directly and vertically in ground with top edge at ground level after making bore hole of size not less than 300 mm dia and 3.0 Mtr long using suitable mechanical drilling rig (for drilling near the specified bldg), connected with galvanised steel earthing lead of 4mm dia all as shown in Plate No-2, connected to the earthing test point, concrete pit in PCC 1:3:6 type C-2with RCC precast pit cover slab 400mmx400mmx80mm with handle for lifting made out of 8mm dia MS rod, funnel, wiremesh, 15 mm dia light grade GI tubing for protection of GI wire 4mm dia, charcoal and salt in alternate 150mm thick layers around GI earth pipe, including necessary returning filling in & removal all as specified or indicated in SSR Part-I, including testing to achieve earth resistance value as per IS specification on completion.