REPAIR REPLACEMENT OF DEFECTIVE SPARES COMPREHENSIVE MAINTENANCE OF CRANES AND HOISTS LOCATED IN 505 ABW CVD COD AND 35 INF BDE UNDER GE(U) PM DELHI CANTT 10

Amount

Comprehensive preventive maintenance by technically qualified technician and rendering operationally EOT crane of capacity as mentioned below including assemblies inspection and maintenance including checking / tightening of all nut , bolt & breaks any type any size complete system, adjusting etc of all breaks motions and VFD /VVVF drive adjustment setting of EOT / HOT cranes with having single or double girder type and providing greasing & oiling of traveling / moving parts of crane with connecting motor girder parts for movement of crane hoist / long / cross traveling and including maintaining the controlling of speed / creeping micro speed of motors with minor maint / repair electrically operated main control panel wire with connecting control wiring system consisting of main switch, step down transformer, contactor, HRC fuse, VFD, PLR, control pendent ,wire rope with break drum unit, gear box unit , oil levels, motor bed / foot ,electrical control cable, motor terminal, end cable carriage trolly , motor shaft, bush flange bearing with lathe work ,chain pulley block, ratchet clutch, gear block, chain wheel, chain etc and including locating the defect or fault and rectification of the fault and rectification of oil leakage etc any type any size and replacement of defected nut, bolt & washer and making it soundless/sound proof and after trails testing run of crane for smooth functioning / operation satisfactorily of the following mentioned capacity cranes/Hoist complete all as specified and as directed. Details of EOT Crane (i) EOT crane of 50 Ton capacity located in 505 ABW /CVD - 02 No. ( Make of Cranex Ltd-01 No & M/s John Smith -01 No) (ii) EOT crane of 45 Ton capacity located in 505 ABW - 01 No. ( Make of Rockwell Hoist) Total = 03 x 06 months = 18 Month

All as per srl item No 01 here-in-before but EOT Crane/Hoist of capacity is under mentioned complete all as specified and as directed. Details of EOT Cranes / Hoist (i) EOT crane of 20 Ton capacity located in 505 ABW - 01 No. ( Make of Cranex Ltd) (ii) EOT crane of 20/05 Ton capacity located in 505 ABW - 01 No. ( Make of Cranex Ltd) (iii) EOT crane of 10 Ton capacity located in 505 ABW - 01 No. ( Make of Cranex Ltd) Total = 03 x 06 months = 18 Month

All as per srl item No 01 here-in-before but EOT Crane / Hoist of capacity is under mentioned complete all as specified and as directed. Details of EOT Cranes /Hoist (i) EOT crane of 05 Ton capacity located at 505 ABW - 10 Nos. ( Make of Cranex Ltd-07 Nos,Tojyam Steel- 02 Nos, & Grip Engineer-01 No) (ii) EOT crane of 03 Ton capacity located at 505 ABW - 03 Nos. ( Make of Dinesh Enterprises-02 Nos, & USGC-01 No) (iii) EOT crane of 02 Ton capacity located at 505 ABW / 35 Inf Bde - 14 Nos. ( Make of Cranex Ltd -12 Nos, Grip enterprises-1 No & USGC-01 No) Total = 27.0 x 06 months = 162.0 Month

Notes for srl item Nos 1 to 3 :- (i) Inspection checking decarbonising & tightning of electrical connection in total system including replacement of thimbles etc. (ii) Inspection & checking of fuses, setting & tightning the same as per their capacity. (iii) Inspection and setting of voltage system including replacement of fused indicating lamp etc. (iv) Spares for EOT crane will be measured and paid seperately as given in BOQ. (v) Contractor will carry out comprehensive maintenance once in a month for six (06) months and maintain the record of same as per the performa of monthly maintenance check enclosed in the tender documents.The same shall be forwarded alongwith RAR failing which no payment shall be released to the contractor. (vi) Contracor will ensure serviceability and safety of crane during his each visit by way of maintining job card duly signed by Engr-in-Charge and JE E/M, (vii) The contractor will also send Technician on call basis in case of any fault. Fault to be rectified within 8hrs of receipt of complaint failing which Rs 500/- per day will be deducted till rectification of defect. (viii) Rates of all consumables such as lubricant, thrustor brake oil , nut bolt, split pins, bushes, gasket ,insulation sleeve,hanger,end cover and joint cover for shrouded bus bar , Push Buttorn for pendent are deemed to be included in the quoted rates.

Notes for srl item Nos 1 to 3 :- (ix) The maintenance & repair under this contract shall be done through MoU issued by any one of OEM i.e. M/s Rockwell Hoisto Cranes Pvt Ltd, M/s Poineer Cranes, M/s Hercules Hoisto, M/s Turbo Fergusan (India) Pvt Ltd, M/s Cranex, M/s USGC, M/s Garlik, M/s Morri, M/s Hindustan Livers, M/s Grip Engineers, M/s Meta feb, M/s JPSENT. The contractor will have to submit MoU on stamp paper of Rs 100/- duly notarized, as per specified Performa on Ser Page No.114 & 115 within fifteen days of acceptance of tender, failing which the contract will be liable to be cancelled and work shall be executed as per policy in vogue. (xi) OEM’s are exempted from production of MoU, if they participate in bidding directly, subject to fulfilling requirements as mentioned in the tender. It may also be noted that, if the OEM’s issues MoU for participation of other bidder than OEM’s bid will be rejected upon his direct participation in the tendering process.

Supply , fixing, adjustment in replacement of unserviceable AC Drive / verable frequency drive (VFD)/ frequency convertor device system of capacity of 11.0 KW (HD) three phase supply system with required input 3 x AC 380-480 Volt , 50 / 60 HZ and out put 3 x AC 0-480 Volt, frequency 0-400 HZ including DBR suitable for drive or as per existing sample with having setting controlling devices system for operating /controlling of slow / high speed for all motion and other controlling system etc for smooth functional of over head electric traveling crane and including making controlling cable connection of system and testing on load complete all as specified and as directed. Make :- L&T/Yaskawa/Siemens/Crompton/fuji

All as per srl item No 04 here-in-before but of capacity 7.5 KW (HD) complete all as specified and as directed.

All as per srl item No 04 here-in-before but of capacity 5.5 KW (HD) complete all as specified and as directed.

Overhauling of Electric wire rope Hoist capacity 02 to 05 Ton complete with dismantling and raplcement of defective parts complete after then reassembled in existing straucture and place complete and comprising of the following:- (i) Greasing/oiling of required part ie shaft, coupling, rope drum shaft bearing etc. (ii) Checking & testing/adjustment of brakes for all the motions (iii) Checking & tightening of coupling bolts, motor foundation bolt , wheel aligment etc. (iv) Checking the wiring connections in control panel and other accessories and to ensure that no loose/naked connection exist. (v) Checking of gear oil in gear boxes and topping oil if necessary . (vi) Cleaning of Bridge girder panel, complete.(vii) Checking and alingment of the mechanical parts i,e gear box , wheel axel. Note:- (i) All consumable items such as ball bearing ,brake and gear oil,fuse,Nuts & Bolts, wheel ,bracket indicating lamp need to be replace with new at site are including in quoted rate by the contractor. (ii) Replacement of Steel wire Rope, bottom block, limit switch, control panel ,brake drum , Disc brake and push button station shall be measured and paid seperaterly.

Supply & fixing in replacement Master Contactor 5 Step Type CMN/7 No of Contact 7 Spring Retun Type in Sheet Steel Enclosure suitable for crane operation or as per sample complete all as specified and as directed. Make:- Speedage / Speed-0- control/Omega

Supply and fixing MCCB FP 250 Amp, 35/36 KA,415 Volts with fixed thermal and fixed magnetic setting type complete any retrofit work, terminal links with thimbles, gland complete and taking down of existing MCCBs all as specified and as directed Make:- Havells/Legrand /HPL/ABB/L&T

Supply and fixing MCCB FP 200 Amp, 35/36 KA,415 Volts with fixed thermal and fixed magnetic setting type complete any retrofit work, terminal links with thimbles, gland complete and taking down of existing MCCBs all as specified and as directed Make:- Havells/Legrand /HPL/ABB/L&T

Supply and fixing MCCB TP 100 Amp, 25KA,415 Volts with fixed thermal and fixed magnetic setting type complete any retrofit work, terminal links with thimbles, gland complete and taking down of existing MCCBs all as specified and as directed Make :- Havells/Legrand /HPL/ABB/L&T

Supply & Fixing in replacement MCB 3 pole, 415V AC, 32 Amp rating 16 KA rupturing capacity, C curve complete with any retrofit work thimbles, gland as per requirement in existing panel complete all as specified and as directed. Make :- Legrand/Schneider/L&T/ABB

Supply & Fixing in replacement MCB 3 pole, 415V AC, 63 Amp rating 16 KA rupturing capacity, C curve complete with any retrofit work ,thimbles/lugs, gland as per requirement in existing panel complete all as specified and as directed. Make :- Legrand/Schneider/L&T/ABB

Supply and replacement of Electro Hydraulic Thrustor Brake MDT 100-18 Kg , alongwith suitable brake shoe liner with ribets complete, required any retrofit work for fitting in existing foundation of thrustor brake complete all as specified and as directed. Make :- Speedage / Speed-o-control/ USGC

Supply and replacement of Electro Hydraulic Thrustor Brake MDT 150-18 Kg , alongwith suitable brake shoe liner with ribets complete, required any retrofit work for fitting in existing foundation of thrustor brake complete all as specified and as directed. Make :- Speedage / Speed-o-control/ USGC

Supply and replacement of Electro Hydraulic Thrustor Brake MDT 200-18 Kg , alongwith suitable brake shoe liner with ribets complete, required any retrofit work for fitting in existing foundation of thrustor brake complete all as specified and as directed. Make :- Speedage / Speed-o-control/ USGC

Supply and replacement of Electro Hydraulic Thrustor Brake MDT 250 -18 Kg , alongwith suitable brake shoe liner with ribets complete, required any retrofit work for fitting in existing foundation of thrustor brake complete all as specified and as directed. Make :- Speedage / Speed-o-control/ USGC

Supply and replacement of Electro Hydraulic Thrustor Brake MDT 300-34 Kg , alongwith suitable brake shoe liner with ribets complete, required any retrofit work for fitting in existing foundation of thrustor brake complete all as specified and as directed. Make :- Speedage / Speed-o-control/ USGC

Supply and replacement of AC poly electromagnatic solenoid brake size of 7" including suitable brake shoe liner with ribets complete, required any retrofit work for fitting in existing foundation complete all as specified and directed. Make :- Speedage / Speed-o-control/ BCH

Supply & fixing in replacement of Electro Hydraulic Thrustor 18Kg. 3 Phase 415V AC with Hydraulic Oil complete all as specified and directed. Make:- Speedage / USGC / Speed-o-control

Supply & fixing in replacement of Electro Hydraulic Thrustor 34Kg. 3 Phase 415V AC with Hydraulic Oil complete all as specified and as directed. Make :- Speedage / USGC / Speed-o-control.

Supply & fixing in replacement of 3 core 1.5 Sqmm PVC insulated & round sheathed bright annealed copper conductor flexible cable for voltage grade 1100 V , FRLS as per IS: 694 complete all as specified and as directed. Make :- Finolex/ Polycab/KEI/ Havells

Supply & fixing in replacement of 3 core 2.5 Sqmm PVC insulated & round sheathed bright annealed copper conductor flexible cable for voltage grade 1100 V , FRLS as per IS: 694 complete all as specified and as directed. Make :- Finolex/ Polycab/KEI/ Havells

Supply & fixing in replacement of 3 core 4.0 Sqmm PVC insulated & round sheathed bright annealed copper conductor flexible cable for voltage grade 1100 V , FRLS as per IS: 694 complete all as specified and as directed. Make :- Finolex/ Polycab/KEI/ Havells

Supply & fixing in replacement of 3 core 6.0 Sqmm PVC insulated & round sheathed bright annealed copper conductor flexible cable for voltage grade 1100 V FRLS as per IS: 694 complete all as specified and as directed. Make :- Finolex/ Polycab/KEI/ Havells

Supply & fixing in replacement of FRLS cable PVC insulated & PVC round sheathed bright annealed copper conductor flexible cable for 6 Core 1.5 Sqmm voltage grade upto 1100 V as per IS 694/1990 of following size complete all as specified and as directed. Make :- Finolex/ Polycab/KEI/ Havells

Supply & fixing in replacement of FRLS cable PVC insulated & PVC round sheathed bright annealed copper conductor flexible cable for 12 Core 1.5 Sqmm voltage grade upto 1100 V as per IS 694/1990 of following size complete all as specified and as directed. Make :- Finolex/ Polycab/KEI/ Havells

Supply & fixing in replacement of for FRLS cable PVC insulated & PVC round sheathed bright annealed copper conductor flexible cable for 16 Core 1.5 Sqmm voltage grade upto 1100 V as per IS 694/1990 of following size complete all as specified and as directed. Make :- Finolex/ Polycab/KEI/ Havells

Supply /Fixing in replacement Resistence Box for 27.0 H.P. Slipring Motor RV-280, RA-47.5 made out Unbreakble Rustless Punched S.S. Grid Balance Type , 4 Step 10 Min Rating in Well Ventilated M.S. Enclosure Self Mounting Type Natural Air Cooled complete all as specified and as directed. Make :- Lachhman Electronics / Speedage / Speed-O-Control

Supply & fixing in replacement of Step Down Transformer double bound type 415/110V AC 100VA complete all as specified and as directed. Make:- Crompton Greaves /Alstom/Schneider/Bharat Bijlee/Voltamp/ITE Gurgaon /Universal Switch Gear Control

Supply & fixing in replacement of Step Down Transformer double bound type 415/110V AC 500VA complete all as specified and as directed. Make:- Crompton Greaves /Alstom/Schneider/Bharat Bijlee/Voltamp/ITE Gurgaon /Universal Switch Gear Control

Supply & fixing in replacement of Step Down Transformer double bound type 415/220V AC 1KVA complete all as specified and as directed. Make:- Crompton Greaves /Alstom/Schneider/Bharat Bijlee/Voltamp/ITE Gurgaon /Universal Switch Gear Control

Supply & fixing in replacement of Pneumatic Time Delay Relay 0-60 Sec Coil Voltage 110 V AC complete all as specified and as directed. Make:- L&T / Siemens /BCH / ABB /Schneider

Supply & fixing in replacement of Three Pole Power Contactor 3 phase 415V AC3 25 Amp. ML-1.5 with 2 N.O. + 2 N.C. Aux Contect Coil Voltage 110V AC complete all as specified and as directed. Make:- L&T / Siemens /BCH / ABB /Schneider

Supply & fixing in replacement of Three Pole Power Contactor 3 phase 415V AC3 32 Amp. ML-2 with 2 N.O. + 2 N.C. Aux Contect Coil Voltage 110V AC complete all as specified and as directed. Make:- L&T / Siemens /BCH / ABB /Schneider

Supply & fixing in replacement of Three Pole Power Contactor 3 phase 415V AC3 40 Amp. ML-3 with 2 N.O. + 2 N.C. Aux Contect Coil Voltage 110V AC complete all as specified and as directed. Make:- L&T / Siemens /BCH / ABB /Schneider

Supply & fixing in replacement of Three Pole Power Contactor 3 phase 415V AC3 70 Amp. ML-4 with 2 N.O. + 2 N.C. Aux Contect Coil Voltage 110V AC complete all as specified and as directed. Make:- L&T / Siemens /BCH / ABB /Schneider

Supply & fixing in replacement of Three Pole Power Contactor 3 phase 415V AC3 110A Amp. ML-6 with 2 N.O. + 2 N.C. Aux Contect Coil Voltage 110V AC complete all as specified and as directed. Make:- L&T / Siemens /BCH / ABB /Schneider

Supply and replacement of Three pole power contactor 3 phase,415 Volt MNX 185 with 2NO+2NC , 415/110V coil voltage complete all as specified and as directed. Make :- L&T / Siemens/BCH/ ABB/Schneider

Supply and replacement of Three pole power contactor 3 phase,415 Volt MNX 140 with 2NO+2NC, 415/110V coil voltage complete all as specified and as directed. Make :- L&T / Siemens/BCH/ ABB/Schneider

Supply and replacement of Three pole power contactor 3 phase,415 Volt MNX 32 with 1NO or 1 NC , 415/110V coil voltagecomplete all as specified and as directed. Make :- L&T / Siemens/BCH/ ABB/Schneider

Supply and replacement of Three pole power contactor 3 phase,415 Volt MNX 25 with 1NO or 1 NC complete all as specified and as directed. Make :- L&T / Siemens/BCH/ ABB/Schneider

Supply and fixing in replacement of power contactor 3 phase MNX series type or as per existing sample / model of rated capacity 9 Amp 415 volts along with suitable rating of NC/NO type Auxiliary contactor block complete all as specified and as directed. Make :- L&T / Siemens /BCH / ABB /Schneider

Supply and replacement of Current Collector 100A (Suitable for shrouded busbar) with 1mtr PVC copper cable for connection including bracket , welding etc for complete fitting all as specifed and as directed . Make:- Stromeg /Speed-o-control /Safeline.

Supply and replacement of Current Collector 160A (Suitable for shrouded busbar) with 1mtr PVC copper cable for connection including bracket , welding etc for complete fitting all as specifed and as directed . Make:- Stromeg /Speed-o-control /Safeline.

M& L for replacement of shrouded copper conductor busbar 160Amp TPN (4 Bar) "W" Type with PVC sleeves RYBG DSL 4 Bar , hanger,clamps,anchor clamps, power feed kit and caps, joining tool with towing arm, end cap complete and including MS fabricated supports for mounting of conductors made out of mild steel angle of size 40x40x5 mm and 450 mm long including two coats of synthetic enamel back paint cover a coat of red oxide primer and supports to be provided at every one mtr distance complete all as all as specified and as directed . Make:- Stromeg /Speed-o-control /Safeline Make of paint & primer :- Asian/Berger/Jenson & Nicholse/Shalimar

Supply and replacement of 2 way lever type limit switch 2 contact type LS/2SH/2 in IP 54 Enclosure suitable for Crane operation complete bracket and welding work required for fixing complete all as specified and as directed. Make:- Speedage/Speed-o-Control/BCH

Supply and replacement of Rotary type geared limit switch ratio 48:1 with 4 contacts type GRLS/48/4SE.suitable for Crane operation or as per sample complete all fitting on existing place ,as specified and directed. Make:- Speedage/Speed-o-Control/BCH

Supply and replacement of one way type gravity limit switch alongwith counter weight operated shunt limit switch type CWLS/ISH/2 with IP54 enclosure and suitable for crane operation or as per sample complete all fitting on existing place ,as specified and as directed. Make:- Speedage/Speed-o-Control/ BCH

Supply and replacement of Roller type limit switch 4N , NO/NC , 15 Amp , screw mounting IP54 enclosure and suitable for Hoist operation or as per sample complete all fitting on existing place ,as specified and as directed. Make:- Speedage/BCH/L&T/Siemens

Servicing of Helical Gear Box assembly of LT/CT/Hoist complete at any height and replacement of gear box oil seal, cover packing seal , gear box ball bearing, gear oil (90W/40) etc or other defected connecting parts as required at site as per existing sample/type and making it oil leak proof and sound less proof complete and including testing for EOT crane upto 10 ton capacity complete all as specified and as as directed. Note:- (i) Servicing of gear box of any type and testing run work will be carried out by well qualified technician having good experience in the repairing field of EOT / HOT Cranes/Hoist or as approved by Engineer-in-Charge. (ii) Necessary safety measures to be taken by the contractor while dismantling and fixing the Gear box. (iii) Replacement of bearing , gear oil, shaft and any consumable items of helical gear box included in the quoted rate by the contractor.

Taking down old and supply , installation , testing of helical Gear box foot mounting with ratio as per sample and suitable for LT/CT/MH motion of EOT Crane capacity upto 05 Ton Complete including fixing with motor shaft and floating shaft of CT/LT/MH (wheel ) complete alongwith required any retrofit work for fitting in existing foundation of cranes complete all as specified and as directed. Make :- Redicon/Premium/Greaves/Alicon/New Allenberry

Material and labour for taking down of unserviceable motor from EOT crane and including transporting and re-winding of electric motor of capacity 15 HP/ 11.2 KW, 3 phase 415 volts, with supper enameled copper conductor wire as per existing size/gauge including making varnishing drying and connecting fixing accessories etc including refixing on same position and testing on load complete all as specified and as directed.

All as per srl item No 57 here-in-before but of electric motor of capacity 10 HP/ 7.5 KW, 3 phase 415 volts complete all as specified and as directed.

All as per srl item No 57 here-in-before but of electric motor of capacity 5.0 HP/ 3.7 KW, 3 phase 415 volts complete all as specified and as directed.

Supply & fixing in replacement of Automatic Phase Sequence Corrector 25.0 HP 3 Phase 415 V. AC in CRCA Sheet Enclosure 2 mm Thick duly Powder Coated Indoor Type self standing / wall mounting,connecting cable in/out complete all as specified and as directed. Make :- L&T/ Volina / ABB / C&S / USGC

Supply & fixing in replacement of Automatic Phase Sequence Corrector 17.5 HP 3 Phase 415 V. AC in CRCA Sheet Enclosure 2 mm Thick duly Powder Coated Indoor Type self standing / wall mounting,connecting cable in/out complete all as specified and as directed. Make:- L&T/ Volina / ABB / C&S / USGC

Supply & fixing in replacement of defective DC Disc Brake Type Fail Safe Brake Model SLDC 150, 75 Watt. Torge 2 KGM , 3 Phase 415 V including suitable size of rectifier for convert AC- DC complete fitting as per existing loaction all as specified and as directed. Make :- USGC / H.S. engg. / Pethe / Speedage

Supply and fixing in replacement defective Control Panel For 150 Kg. Electric Wire Rope Jib Cranes with complete electrical wiring in/out from the panel complete and Comparising the Follwing accessories complete all as specified and as directed. (a) MCB 10 Amp. TP --- 1 No. (b) MCB 6 Amp. SP -- 2 Nos. (c) Step Down Transformer 415V /110V 100 VA --- 1 No. (d) AB Contactor AC3 18 Amp. with 1 N.C. Coil Voltage 110V.AC --- 4 Nos. (e) O/Load Relay suitable range ---- 1 No. (f) Suiatble Size of Contect Block --- 01 Set. Make of Panel :- L&T/ ABB/ C&S/ Siemens/ Crompton Greaves/ Schneider.

Material and labour for preparing surface and painting of EOT cranes upto 50 Ton capacity complete including double girder beam, trolly, foot path, railing path, motors , shaft, ladder and Gear Box and other connected parts of crane by scraping, cleaning, using wire brush, sand paper etc, and painting complete with one coat of synthetic enamel paint over one coat of zinc chrome primer of approved make and colour applying two coats of golden yellow/tractor orange/gray colour as per existing colour code( CT Span of the cranes not more than 37 metres) complete all as specified and as directed. Note:-(i) Necessary safety measures to be taken by the contractor while painting the cranes. (ii) Any damage to govt property while executing the work is to be make good by the contractor. (iii) The cost of scaffolding arrangement laddars,safety belt,lifting ,and T&P used while painting in the crane will borne by the contractor himself. (iv) Marking on the display board of the Crane i.e Make of cranes , Capacity , MES No/Sr No and Installtion Year in Black paint completed. Make :- Berger/Asian Paints/ Jenson & Nicholson/ Shalimar.

Material and labour for alignment of EOT Crane rail tracks on both sides of the way approx 20 Ft height from the ground floor, including gas cutting, welding and grinding, fish plates , nuts & Bolts for smooth movement of LT Motion of the EOT Cranes ( approx One side length of track 100-150 RM) complete all as specified and as directed. Note:- (i) Necessary safety measures to be taken by the contractor while working on rail tracks. (ii) The cost of scaffolding arrangement laddars,safety belt,lifting ,and T&P used during the alignment / working on rail track will borne by the contractor himself.

Material and Labour for replacement of steel Wire Rope 08 mm dia,F.M.C Construction 6X36 ungalvanised as per IS 2266/02 alongwith suitable rope clamp complete all as specified and as directed. Make :- Usha Martin/ Mahadev elevator

Material and Labour for replacement of steel Wire Rope 10 mm dia, F.M.C Construction 6X36 ungalvanised as per IS 2266/02 alonwith suitable rope clamp complete all as specified and as directed. Make :- Usha Martin/ Mahadev elevator

Material and Labour for replacement of steel Wire Rope 12 mm dia, F.M.C Construction 6X36 ungalvanised as per IS 2266/02 alonwith suitable rope clamp complete all as specified and as directed. Make :- Usha Martin/ Mahadev elevator

All as per srl item No 69 here-in-before but motors capacity of 5.0 HP /3.7 KW ,3 phase, 415 volts ,50 Hz complete all as specified and as directed.

All as per srl item No 69 here-in-before but motors capacity of 3.0 HP / 2.2 KW ,3 phase, 415 volts ,50 Hz complete all as specified and as directed.

Material and labour for cutting/fabrication ,fixing & welding of MS angle iron of size as per site requirement for fixing chequered plates/making ladders, supports fixing brackets etc including bracing ,supports ,clamps,and back plates fabricated fron structural steel section including Nits & Bolts ,washers,welding,bending cold or hot, drilling holes for bolts, in any shape or size as indicated or direcetd and inclusive of one primer coat one under coat and one finishing coat of paint inclusive of one coat of Red Oxide Zinc chrome paint and two coat of alumunium paint complete all specifed and as directed. Note:- The cost of PCC work for fixing of structure/ladders, if needed is deemed to be rate quoted.

supply and replacement of phase indication lamp with indication colour Red,Yellow and Blue for DSL busbar of crane with best quality LED lamps , visibility range upto 200 mtr, including ss powder coated enclosure and necessary welding and bracket for fixing indicator on the bus bar complete all as specified and as directed. Make :- L&T/Siemens/Havells/Schneider

Supplying, Laying ,and fixing in replacement of XLPE insulated armoured heavy duty electric cable of the size 70 Sqmm 3.5 Core ,1100 Volts grade , with stranded aluminium conductor served with aninner sheathing of PVC tape armoured with GI wire and over all PVC sheathed in laid trenches/ passing through pipe/duct/road crossing/surface of wall/in hume pipe etc including fixing hardware,clamps,making good the damaged surfaces etc complete all as specified and as directed. Make :- Polycab/Finolex/ Fort Gloster/KEI/Havells

All as per srl item No 74 here-in-before but size of 50 Sqmm 3.5 Core, 1100 volts grade complete all as specified and as directed.

Material and labour for replacement of Floating shaft made out of M.S. EN8 material medium carbon steel of Cylindrical shape of size 100mm dia and 1.80mtr length and shaft end both side machining with keyway slot including suitable size of coupling both end complete all as specified and as directed. Make :– Speedage/USGC/ Speed-O-Controls.

Supply and replacement of Bearing with plumber Block No. SYJ80TF or as per sample cost iron housing materials and complete mounting in existing place alonwith any retrofit work complete all as specified and as directed Make :- SKF /NBC/ZKL/FAG.

Taking down old and supply, installation and testing of Protective Cum Control panel for 5 Ton EOT crane indoor type, made out of CRCA sheet 2mm thick compatmental type (LT/CT/Hoist) dully powder coated , self standing / wall mounting and complete internal wiring by PVC flexible copper cable and ferruels. Control wiring not less than 2.0sqmm and power wiring not less 4.0 Sqmm and complete connection and comprising the following items. Make:- L&T/ ABB / C&S / Siemens/ Crompton Greaves / Schneider/ Universal Switch gear Control a). MCCB 3P 100A, 25 KA,415 Volt : - 1Nos. b). MCB 3P 63A 415V : - 02 Nos. c). MCB 3P 16A 415V : - 01 No d). MCB 2P 6-10A 230V : - 04 Nos. e)Step Down Transformer double bound type 415/110V AC 500VA - 01 No f) Power Contactor 3P ,40 Amp. ML-3 with 2 N.O. + 2 N.C. Aux Contect Coil Voltage 110V AC : - 5Nos. g) Power Contactor 3P,25 Amp. ML-1.5 with 2 N.O. + 2 N.C. Aux Contect Coil Voltage 110V AC: - 02 Nos. h) Thermal Overload relay range 20-33A suitable for ML Series contactor : - 01 No i) Thermal Overload relay range 09-15A suitable for ML Series contactor : - 02 Nos. j) Thermal Overload relay range 3-5A suitable for ML Series contactor : - 01 No. k) Single Phase Preventer 3 Phase 415V : - 1No l) Step Down Transformer 415/220VAC 1KVA Double Bound : - 01 No m) Connector Block of Sizes. 1 Set. n) Came operate rotory swich ON/OFF : - 2Nos. 0) 01 No digital type muttifuctioning meter show 0-500 Volt, 0-100 Amp KWH meterand set of cast resin CTs of suitable ratio complete.

Taking down old and supply, installation and testing of Protective Cum Control panel for 2 Ton EOT crane indoor type, made out of CRCA sheet 2mm thick compartmental type dully powder coated, self-standing / wall mounting and complete internal wiring by PVC flexible copper cable and ferruels. Control wiring not less than 2.0 sqmm and power wiring not less 4.0 sqmm with incoming and outgoing cable connection and comprising the following items.. Make:- L&T/ ABB / C&S / Siemens/ Crompton Greaves / Schneider/Universal Switch gear Control. a). MCCB 3P 100A , 25KA, Qty : - 01 No b). MCB 3P 63A 415V Qty : - 02 Nos. c). MCB 3P 16A, 415 Volt. Qty : - 01 No. d). MCB 2P 6-10A, 230V Qty : - 04 Nos.. e) Step Down Transformer double bound type 415/110V AC 500VA –01 No f) 3 Pole Power Contactor ML-2 with 2 NO. + 2 NC.Aux Coil Voltage 110V AC : - 05 Nos. g) 3 Pole Power Contactor ML-1.5 with 2NO. + 2 NC. Aux Coil Voltage 110V AC - 03 Nos. h) Thermal Overload relay ML-2 relay range 6-10A .Qty : - 02 Nos. i) Thermal Overload relay ML-2 relay range 3-5A Qty : - 01 No. j) Thermal Overload relay ML-2 relay range 9-15A Qty : - 1 No. k) Single Phase Preventer 3 Phase 415V Qty : - 01 No l) Step Down transformer double bound type 415/220V AC 1 KVA –01 No m)Connector Block of suitable sizes. 1 Set. n) Came operate rotory swich ON/OFF Qty : - 2Nos. 0) 01 No digital type muttifuctioning meter show 0-500 Volt, 0-100 Amp KWH meterand set of cast resin CTs of suitable ratio complete.

Taking down old and supply ,installation, testing of Protective Cum Control panel for 02 Ton Wire rope electric Hoist made out of CRCA sheet 2.0 mm thick duly powder coated , suitable for hoist mounting and complete internal wiring by PVC flexible copper cable and ferruels and comprising the following items Make:- L&T/ USGC/ABB / C&S / Siemens. a). MCB 3P 25 A 415V . : - 01 No b). MCB 2P 4A 230Volts. : - 01 No c). MCB 2P 6A 230 V. : - 01No d). Step Down Transformer double bound type 415/110V AC 100VA - 01 No e) 3 Pole Power Contactor 3 phase 415V AC3 ML-1.5 with 2NO. + 2 N.C. Aux Coil Voltage 110V AC: - 04 Nos. f) Indicating lamp R, Y, B - set of three g) Connector Block of suitable Sizes. 1 Set.

Universal Switch Gear Control

BUSINESS TEK INDIA