Tender for the work of conversion of the existing overhead 11 KV line of Bicholim City, Assonora, Bordem and Bicholim IDC feeder emanating from 33/11KV Bicholim SS to underground cable system in the jurisdiction of SD-I(U), Bicholim, Div V Bicholim

Amount

Cost of Material

Supply of 11KV, 3 core 300 sq.mm A2XFY Aluminium Armoured XLPE Cable through conventional open trenching method in any type of soil including hard laterite.

Supply of 11 KV Straight Through joint 3 core 300 sqmm XLPE

Supply of 11 KV Termination kit Indoor 3 core 300 sqmm XLPE

Supply of 11 KV Termination kit Outdoor 3 core 300 sqmm XLPE

Supply of Cable Route marker

Supply & Erection of Warning tape.

Supply and laying of Sand for cushioning of HT underground cables. (Dimensions : - 0.2*.45*(31593-500))

Supply of RCC Hume Pipe 150mm dia with required no. of collars, for road crossing.

Supply of GI Pipe 150mm, class B

Supply and laying of RCC protective covers of size 600mm long x 250mm width and 50mm thick capable of bearing load of 135Kg. And covered with earth/ sand upto depth of 0.15mts. Confirming to IS 1255-1967 at non-road crossing.

Supply of 11KV, 3 core 300 sq.mm A2XFY Aluminium Armoured XLPE Cable by trenchless technology by adopting horizontal directional drilling (HDD method) [Note:- Rate of supply of Cable Shall be same as above]

Laying, Testing & commissioning of HT/LT UG cables by trenchless technology by adopting horizontal directional drilling (HDD method). The work includes preparation of site, Boring as well as drawing of cable in Normal/hard soil including soft, watery and sandy soil with minimum 8" bore size, which includes Supply & Laying of HDPE pipe

Supply of 11KV, 630 Amps, Outdoor, SF6 Ring Main Unit with two Load Break Switches and one Circuit Breaker(includes associated works as per Site Condition)

Supply of 11KV, 630 Amps, Outdoor, SF6 Ring Main Unit with three Load Break Switches(includes associated works as per Site Condition)

Supply of 11KV, 630 Amps, Outdoor, SF6 Ring Main Unit with Four Load Break Switches(includes associated works as per Site Condition)

Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size for foundations. Dimensions for RMU for 1. 4LBS =(2.8*.551*1.5)*2 2. 2LBS+1CB & 3LBS = ((2.8*3/4)*.551*1.5)*2

Centering and shuttering including struttings, propping etc and removal of formwork . Dimensions for RMU for 1. 4LBS =((2.8*1.5*2)+(1.5*0.551*2))*2 2. 2LBS+1CB & 3LBS = (((2.8*3/4)*1.5*2)+(1.5*0.551*2))*2

12mm cement plaster 1:4 (1 - cement: 4 - fine sand) for foundations. Dimensions for RMU for 1. 4LBS =((2.8*0.551)+(2.8*0.5*2)+(0.5*0.551*2))*2 2. 2LBS+1CB & 3LBS = (((2.8*3/4)*0.551)+(2.8*3/4)*0.5*2)+(0.5*0.551*2))*2

Supply of 11KV, 3 core 95 sq.mm A2XFY Aluminium Armoured XLPE Cable through conventional open trenching method in any type of soil including hard laterite.

Supply of 11 KV Termination kit Indoor 3 core 95 sqmm XLPE

Supply of 11 KV Termination kit Outdoor 3 core 95 sqmm XLPE

Supply & Erection of Warning tape.

Supply and laying of Sand for cushioning of HT underground cables. (Dimensions : - 0.2*.45*1480)

Disposal of earth at a distance of 3000 mts (Dimensions : - 0.2*.45*1480)

Supply and laying of RCC protective covers of size 600mm long x 250mm width and 50mm thick capable of bearing load of 135Kg. And covered with earth/ sand upto depth of 0.15mts. Confirming to IS 1255-1967 at non-road crossing.

Supply of Earthing complete with 40mm GI Pipe, 2.5 mts long alongwith 20 kgs each salt, charcoal complete etc.(as per GED Standard practice)

Supply of HDGI flat of size 25mm x 5mm for earthing.

Erection/Dismantling (Dismantled materials to be handed over to concerned Sub Division)

Laying, Testing & commissioning of 11KV, 3 core 300 sq.mm A2XFY Aluminium Armoured XLPE Cable through conventional open trenching method in any type of soil including hard laterite.

Erection, Testing & Commissioning of 11 KV Straight Through joint 3 core 300 sqmm XLPE

Erection, Testing & Commissioning of 11 KV Termination kit Indoor 3 core 300 sqmm XLPE

Erection, Testing & Commissioning of 11 KV Termination kit Outdoor 3 core 300 sqmm XLPE

Erection of Cable Route marker

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sq.m on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5m disposed earth to be leveled and neatly dressed including providing barricading, danger lighting guarding as directed in : Hard Soil (Dimensions : - 1.1*.45*(31593-500))

Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge (Dimensions : - 0.9*.45*(31593-500))

Disposal of earth at a distance of 3000 mts (Dimensions : - 0.2*.45*(31593-500))

Laying of RCC Hume Pipe 150mm dia with required no. of collars, for road crossing.

Laying of GI Pipe 150mm, class B

Laying of 11KV, 3 core 300 sq.mm A2XFY Aluminium Armoured XLPE Cable by trenchless technology by adopting horizontal directional drilling (HDD method) [Note:- Rate of supply of Cable Shall be same as mentioned above]

Erection, Testing & Commissioning of 11KV, 630 Amps, Outdoor, SF6 Ring Main Unit with two Load Break Switches and one Circuit Breaker(includes associated works as per Site Condition)

Erection, Testing & Commissioning of 11KV, 630 Amps, Outdoor, SF6 Ring Main Unit with three Load Break Switches(includes associated works as per Site Condition)

Erection, Testing & Commissioning of 11KV, 630 Amps, Outdoor, SF6 Ring Main Unit with Four Load Break Switches(includes associated works as per Site Condition)

Erection, Testing & Commissioning of 11KV, 3 core 95 sq.mm A2XFY Aluminium Armoured XLPE Cable through conventional open trenching method in any type of soil including hard laterite.

Erection, Testing & Commissioning of 11 KV Termination kit Indoor 3 core 95 sqmm XLPE

Erection, Testing & Commissioning of 11 KV Termination kit Outdoor 3 core 95 sqmm XLPE

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sq.m on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5m disposed earth to be leveled and neatly dressed including providing barricading, danger lighting guarding as directed in : Hard Soil (Dimensions : - 1.1*.45*1480)

Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge (Dimensions : - 0.9*.45*1480)

Erection, Testing & Commissioning of Earthing complete with 40mm GI Pipe, 2.5 mts long alongwith 20 kgs each salt, charcoal complete etc.(as per GED Standard practice)

Erection of HDGI flat of size 25mm x 5mm for earthing.

Removing of RCC poles 9.00 mtr

Removing of M.S. Rail Pole 90 lb

Removing of HDGI 11 KV V-shape 'X' arm with HDGI Clamps, Nut & Bolts etc for RCC poles 9.00 mtr

Removing of HDGI 11 KV V-shape 'X' arm with HDGI Clamps, Nut & Bolts etc for M.S. Rail Pole 90 lb

Removing of Cut point Channel 1.3 Mtr long with HDGI Clamps, Nut & Bolts etc for RCC poles 9.00 mtr

Removing of Cut point Channel 1.3 Mtr long with HDGI Clamps, Nut & Bolts etc for M.S. Rail Pole 90 lb

Removing of Guard Channel 1.5 Mtr Long with HDGI Clamps, Nut & Bolts etc for RCC poles 9.00 mtr

Removing of Guard Channel 1.5 Mtr Long with HDGI Clamps, Nut & Bolts etc for M.S. Rail Pole 90 lb

Removing of HDGI Top fitting cross arm ISMC channel, 75 x 40mm, 0.7mts long with HDGI Clamps, Nut & Bolts etc for RCC poles 9.00 mtr

Removing of HDGI Top fitting cross arm ISMC channel, 75 x 40mm, 0.7mts long with HDGI Clamps, Nut & Bolts etc for M.S. Rail Pole 90 lb

Removing of Stay clamps for RCC poles 9.00 mtr

Removing of Stay clamps for M.S. Rail Pole 90 lb

Removing of G.O.A.B. Switch 11 KV 400 Amps

Removing of 11 KV Pin Insulators with G.I. Pin

Removing of 11 KV disc insulators 45 KN with Metal parts

Removing of Stay Set Complete for RCC poles 9.00 mtr

Removing of Stay Set Complete for M.S. Rail Pole 90 lb

Removing of HDGI Structural material

Removing of ACSR conductor 'WEASEL' for Guarding

Removing of ACSR conductor 'RACCON' for Line

Aravinda Electricals