8382/E8

Amount

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water complete and removing the debries all as specified and directed.

Demolition of Plain cement concrete (un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Dismantling fencing wire mesh any type complete all as specified and as directed.

Dismantling posts of ant type ( wood, steel or RCC) of any section embedded in concrete including taking out embedded portion and making good disturbed ground complete all as spcified and as directed.

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation, etc n exc 10 Sqm on plan and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 Cm as in soft/loose soil complete all as specified and directed.

Removing excavated material not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

Material and Labour Plain cement concrete 1:3:6 type C2 (using 40 mm graded crushed stone aggregates) as in foundation, filling and mass concrete complete all as specified and as directed.

Material and Labour Precast Reinforced cement concrete Jalli 50mm thick type B0 ( using 12.5mm graded crushed stone aggregates) including formwork and set in CM 1:4 including all mouldings, reinforcement etc complete all as specified and as directed .

Material and Labour Brick work with fly ash bricks, pulverized of designation 7.5, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed

All as above Item No.15.00 here-in-before but except bricks. Note:- Servicable bricks will be obtained from Item No. 12.00 mentioned here-in-before.

Material and Labour Plain cement concrete 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregates) as in coping, benching etc complete all as specified and as directed.

Material and Labour Reinforced cement concrete 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregates) as in beam, lintel beam, coping complete all as specified and as directed.

Material and Labour Reinforced cement concrete 1:2:4 type B1 (using 20 mm graded crushed stone aggregates) as in foundation, fotting and raft concrete complete all as specified and as directed.

Material and Labour Reinforced cement concrete 1:2:4 type B1 (using 20 mm graded crushed stone aggregates) as in pier, posts, struts and coloumn complete all as specified and as directed.

Materials and Labour Formwork for rough finished surfaces to the sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed.

Materials and Labour Formwork for rough finished surfaces to sides of pillars, posts, struts, piers, columns and stanchions of square or rectangular in section complete all as specified and as directed.

Materials and Labour Formwork for rough finished surfaces to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers,lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and as directed.

Supply only PVC coated MS galvanised Chain link fencing 3.00 mm dia of wire (minimum weight 3.00Kg/Sqm) and spacing 75 mm x 75mm including line wire to any standard rails with staining bolts complete all as specified and as directed. Note:- Line wires shall be measured and paid separately under relevant items of these schedule.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed.

Supply and fix Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) including taking down old unserviceable barbed wire complete all as specified and as direcetd.

Supply and fix TMT steel bars 10mm dia and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.

Supply and fix TMT steel bars 6 to 8mm dia for stirrups, spacers and binders and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.

Supply and fix Mild steel work in posts and struts and flat iron in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Material and Labour for Mild steel framed work such as for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc. and similar work conforming to Fe-410-0 Gde E-250 complete all as specified and directed.

Material and Labour for Mild steel framed work such as for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc. and similar work conforming to Fe-410-0 Gde E-250 complete as in ornamental and intricate design all as specified and directed.

Supply Only Mild steel TMT bars 8mm dia including binding with mild steel wire ( annealed) not less than 0.90mm dia complete.

Supply and Fix Mild steel screw bolts ( Machine made) with hexagonal or square heads at one end and screwed at other end, each screwed end to be fitted with one hexagonal or square nut and one washer, length of bolt exc 5 Cm but n.exc 10 Cm and dia of neck 11mm to 15mm complete all as specified and as directed.

Material and Labour 16-18mm thick granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, wall cladding and like in CM(1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed bed in CM 1:4 including necessary edge moulding/chamfering (full or half moulding) complete all as specified and directed including taking down old unserviceable granite with bedding layer.

Material and Labour Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished the surfaces even and smooth with using extra cement complete all as specified and directed.

Material and Labour Rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished the surfaces even and smooth with using extra cement complete all as specified and directed.

Materials and labour Preparation of newly plastered external surfaces of any description and applying Premium Acrylic smooth exterior paint with silicon additives of required shade complete all as specified and directed. Note:- For new works Two or more coats applied @ 1.43 litre/ 10 Sqm area over and including Priming coat of exterior primer applied @ 2.20 Kg/ 10 Sqm.

Materials and labour Complete removal of existing treatment from old external surfaces and applying Premium Acrylic smooth exterior paint with silicon additives of required shade complete all as specified and directed. Note:- For new works Two or more coats applied @ 1.43 litre/ 10 Sqm area over and including Priming coat of exterior primer applied @ 2.20 Kg/ 10 Sqm.

Materials and Labour Cement based paint of any colour / tint , two coats over a coat of alkali reistance primer on new external surfcaes including necessary preparation of surfaces complete all as specified and as directed.

Materials and Labour Cement based paint of any colour / tint , two coats over a coat of alkali reistance primer on old external surfcaes including complete removal of existing treatment complete all as specified and as directed.

Material and Labour Synthetic enamel paint of any colour / tint, two coats over a coat of red oxide primer on new steel or iron surfaces over 10 Cm width or girth including necessary preparation of surfaces complete all as specified and directed.

DIPAK ENTERPRISE

BHARUKA ENTERPRISES

AUTO ELECTRICALS

M A ENTERPRISES

Frazco Enterprise

SOVA ENTERPRISE

M/S SK PAUL