Additional works for Construction of Community hall at Austin town in ward no 111 shanthalanagara New Ward No 29

Additional works for Construction of Community hall at Austin town in ward no 111 shanthalanagara New Ward No 29

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, prov...

Providing White washing with lime to give an even shade :New work (three coats) with lime of approved quality, including cost of materials, labour complete as per specifications and as per directions ...

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand) including rounding off corners wherever requir...

Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smo...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less tha...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...

Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand ...

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre...

LED Titanium lettered name board of dimension 34' X 2'

Jag Fis 5953 WH WC with PP S-Cove. with includes all labour charges trasportion charges, installation charges and all other taxes with all lead and lift as per the approval of engineer incharge.

Jag Jcs 2400W Single PC Slim Conc Cistem with includes all labour charges trasportion charges, installation charges and all other taxes with all lead and lift as per the approval of engineer incharge.

Jag Jcp 392415 Control Plate Aria with includes all labour charges trasportion charges, installation charges and all other taxes with all lead and lift as per the approval of engineer incharge.

Jag Ald-583 Hand Shower ABS Body 1 mtr. PVC Tube. with includes all labour charges trasportion charges, installation charges and all other taxes with all lead and lift as per the approval of engineer ...

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangul...

Jag Opp 15307PM Bib Cock with includes all labour charges trasportion charges, installation charges and all other taxes with all lead and lift as per the approval of engineer incharge.

Supply and fixing of C.P brass concealed stop cock with wall flange. (Market Rate) 20mm dia inclusive of all other charges as per the direction of Engineer in Charge of the work.

Providing and fixing wall mounting type CP soap dish. The cost to include all fittings and fastenings all complete as required. inclusive of all other charges as per the direction of Engineer in Charg...

Providing and fixing heavy cast brass C.P coat hooks fixed with rawl plugs with C.P brass screws. All complete as required. inclusive of all other charges as per the direction of Engineer in Charge of...

PVC 4" pipe Supreme with includes all labour charges trasportion charges, installation charges and all other taxes with all lead and lift as per the approval of engineer incharge.

Providing and fixing high pressure type gunmetal ball float valve of approved quality 25mm inclusive of all other charges as per the direction of Engineer in Charge of the work.

Jag Urs Wht 13261 Urinals. with includes all labour charges trasportion charges, installation charges and all other taxes with all lead and lift as per the approval of engineer incharge.

Providing and fixing PVC 'P' or 'S' of deep trap wherever required or nanhi trap self cleaning design with or without vent. Complete including cutting and making good the walls and floors. (100mm dia ...

Providing and fixing CPVC Pipe (SDR 11)1" inclusive of all other charges as per the direction of Engineer in Charge of the work.

Providing and fixing CPVC Elbow 1" inclusive of all other charges as per the direction of Engineer in Charge of the work.

Providing and fixing CPVC R Tee 1X1/2 (Brass) inclusive of all other charges as per the direction of Engineer in Charge of the work.

Providing and fixing CPVC Collar 1" inclusive of all other charges as per the direction of Engineer in Charge of the work.

Ond. CP Extension Nipple 1 1/2" with includes all labour charges trasportion charges, installation charges and all other taxes with all lead and lift as per the approval of engineer incharge.

Providing and fixing 15mm dia flexible hose pipe connecting angle stop cock and the pillar cock or cistern inclusive of all other charges as per the direction of Engineer in Charge of the work.

Providing and fixing of Uriversal Clamp of size 2.1/2" made out of Mild steel including fixation with the drop in anchor and taper nut Sleeve anchor inclusive of all other charges as per the direction...

Providing and fixing of Uriversal Clamp of size 2.1/2" made out of Mild steel including fixation with the drop in anchor and taper nut Sleeve anchor inclusive of all other charges as per the direction...

Providing and fixing PVC R Y 110mX75mm inclusive of all other charges as per the direction of Engineer in Charge of the work.

Providing and fixing PVC End Cap of size 40mm including all fixation charges with working Presuure of 4kgf/cm2 inclusive of all other charges as per the direction of Engineer in Charge of the work.

Providing and fixing CPVC End Cap of size 3/4" including all fixation charges with working Presuure of 4kgf/cm2 inclusive of all other charges as per the direction of Engineer in Charge of the work.

Providing and fixing PVC Elbow with flawless finish made of superior quality C-PVC of size 40mm and Cost is inclusive of all fittings and fixation charges inclusive of all other charges as per the dir...

Providing and fixing PVC Shoe of size 40mm bent with angle of 45% with round shape including cost of all fittings and fixation charges inclusive of all other charges as per the direction of Engineer i...

Providing and fixing PVC Shoe of size 75mm bent with angle of 45% with round shape including cost of all fittings and fixation charges inclusive of all other charges as per the direction of Engineer i...

Providing and fixing PVC Shoe of size 75mm bent with angle of 45% with round shape including cost of all fittings and fixation charges inclusive of all other charges as per the direction of Engineer i...

Providing and fixing PVC Plain Bend 110mm inclusive of all other charges as per the direction of Engineer in Charge of the work.

Providing and fixing PVC Plain Bend 75mm inclusive of all other charges as per the direction of Engineer in Charge of the work.

Providing and Fixing PVC P Trap of Size 4" inclusive of all other charges as per the direction of Engineer in Charge of the work.

Providing and Fixing Multi Floor Drop inclusive of all other charges as per the direction of Engineer in Charge of the work.

Providing and Fixing Stopper Band of Size 1/4" inclusive of all other charges as per the direction of Engineer in Charge of the work.

Providing and Fixing Conside Valve of size 3/4" inclusive of all other charges as per the direction of Engineer in Charge of the work.

Providing and Fixing Washer inclusive of all other charges as per the direction of Engineer in Charge of the work.

Providing and fixing U Clamp of size 6" made out of Stainless steel of SS 304 Grade with Polished Surface. Including connection and fixation charges inclusive of all other charges as per the direction...

Providing and fixing U Clamp of size 2 (1/2)" made out of Stainless steel of SS 304 Grade with Polished Surface. Including connection and fixation charges inclusive of all other charges as per the dir...

Providing and Fixing Tee of size 1" made up of durable and strong CPVC Material with chemical and weather resistance, includng all fixation charges inclusive of all other charges as per the directio...

Providing and fixing V Clamp of size 4" made up of good Quality of stainless steel of High tensile strength Including connection and fixation charges inclusive of all other charges as per the directi...

Providing and fixing CPVC Clamp of size 1 (1/4)" made up of good quality durable CPVC Material for pipe fittings, Including connection and fixation charges inclusive of all other charges as per the d...

Providing and fixing CPVC Clamp of size 1" made up of good quality durable CPVC Material for pipe fittings, Including connection and fixation charges inclusive of all other charges as per the directi...

Providing and installation of Plug of size 1/2" inclusive of all other charges as per the direction of Engineer in Charge of the work.

Providing and Fixing T Type Bend of size 110mm of suitable end connection of elbow Fitting type, including all connection and fixation charges inclusive of all other charges as per the direction of En...

Providing S S A-Blade made up of Good quality stainless steel with non corrosive Property and High consistency inclusive of all other charges as per the direction of Engineer in Charge of the work.

Providing and fixing PVC Pipe of size 1.1/4", 6Kg and resistant to various acids and bases with maxium usable temperature 140'F (60degree celcius). including cost of all fittings and fixation charges ...

Providing and fixing PVC Pipe of size 4", 4Kg and resistant to various acids and bases with maxium usable temperature 140'F (60degree celcius). including cost of all fittings and fixation charges incl...

Making rain water Spouts/ grating with PVC bends, elbows, tees etc., 150 X 150mm C.I grating. inclusive of all other charges as per the direction of Engineer in Charge of the work.

CPVC Step Over Bend 3/4" inclusive of all other charges as per the direction of Engineer in Charge of the work.

Providing and fixing PVC Plain Tee 75mm inclusive of all other charges as per the direction of Engineer in Charge of the work.

Providing and fixing PVC Solvent 250ml (Maruthi) inclusive of all other charges as per the direction of Engineer in Charge of the work.

Providing and fixing PVC Lubricant 250ml inclusive of all other charges as per the direction of Engineer in Charge of the work.

Providing and fixing PVC Shoe 110mm inclusive of all other charges as per the direction of Engineer in Charge of the work.

Providing and fixing CPVC R Tee 1X3/4 inclusive of all other charges as per the direction of Engineer in Charge of the work.

Providing and Fixing CPVC Endcap of size 1" inclusive of all other charges as per the direction of Engineer in Charge of the work.

Providing and Fixing CPVC Pipe of size 3/4" inclusive of all other charges as per the direction of Engineer in Charge of the work.

Providing and Fixing CPVC Elbow of size 3/4" inclusive of all other charges as per the direction of Engineer in Charge of the work.

Providing and Fixing CPVC Elbow (Brass) of size 3/4 X 1/2 inclusive of all other charges as per the direction of Engineer in Charge of the work.

Providing and Fixing CPVC Tee of size 3/4" inclusive of all other charges as per the direction of Engineer in Charge of the work.

Providing and Fixing CPVC Collar of size 3/4" inclusive of all other charges as per the direction of Engineer in Charge of the work.

Providing and Fixing End Plug of size 1/2" inclusive of all other charges as per the direction of Engineer in Charge of the work.

Water Level Controller

Groove works Supplying heavy gauge PVC Conduit Pipe....dia.......mm thick with suitable size bends,metal junction boxes adhesiv epaste etc.,by groove cutting in the wall and fixing by bracing U or J h...

Groove works Supplying heavy gauge PVC Conduit Pipe....dia.......mm thick with suitable size bends,metal junction boxes adhesiv epaste etc.,by groove cutting in the wall and fixing by bracing U or J h...

Supplying and fixing sheet Metal box made out of 18SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 75 x 75 x 65 mm

Supplying and fixing sheet Metal box made out of 18SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 100 x 75 x 65 mm

Supplying and fixing sheet Metal box made out of 18SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 135 x 75 x 65 mm

Supplying and fixing sheet Metal box made out of 18SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 200 x 90 x 65 mm

Supplying and fixing sheet Metal box made out of 18SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 200 x 200 x 65 mm

Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using2x1.5Sqmm(Phase&Neutral)&1x1.0sqmm(Earthwire)FRLS multi strand PVC insulated copper wire(confirmingtoIS-694:and la...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specifiedIS-...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specifiedIS-...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specifiedIS-...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specifiedIS-...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specifiedIS-...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specifiedIS-...

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cuttinginBrick/C.Cwall,including necessary rawl plugs,Machine/NF scr...

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cuttinginBrick/C.Cwall,including necessary rawl plugs,Machine/NF scr...

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cuttinginBrick/C.Cwall,including necessary rawl plugs,Machine/NF scr...

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cuttinginBrick/C.Cwall,including necessary rawl plugs,Machine/NF scr...

Supplying and fixing superior quality modular switch mounting polycarbonateplate with necessary supporting back plate with required nos.of machine screws,boltsnutsetc.,complete on the existing metal/P...

Supplying and fixing superior quality modular switch mounting polycarbonateplate with necessary supporting back plate with required nos.of machine screws,boltsnutsetc.,complete on the existing metal/P...

Supplying and fixing superior quality modular switch mounting polycarbonateplate with necessary supporting back plate with required nos.of machine screws,boltsnutsetc.,complete on the existing metal/P...

Supplying and fixing of modular switch &connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6A One Way Switch

Supplying and fixing of modular switch &connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6A Two Way Switch

Supplying and fixing of modular switch &connected accessories on existing modular switch plate as per IS 3854 and IS 1293 TV/Telephone SockeT

Supplying and fixing of modular switch &connected accessories on existing modular switch plate as per IS 3854 and IS 1293 Stepped Fan Regulator Two Module

Supplying and fixing of modular switch &connected accessories on existing modular switch plate as per IS 3854 and IS 1293 32A DP Switch

Supplying of recess mounting non integrated typeLEDdownlight.Wluminaire comprising of pressuredcast/extrudedaluminium housing,with spring load edfalseceiling clamps,LEDofPower/COBwithCCT6500degreeK,CR...

Supplying capacitortype ceiling fan complete with down rod blades,shackle,canopiesetc,for operationon230V,50cycles.SinglephaseACsupplyconformingtoISS-374-1979andwith doubleballbearingsystem.56" Sweep ...

Supplying exhaust fan of1440RPM of 300mm(12")size with bracket blades complete for light duty suitable to operateon230V50Hz, AC Supply

Supply and fixing of fully Enclosed Automatic Transfer Switch (ATS) Pre-wired with Flexible Settings and seamless transfer

between two power sources. The enclosure made of MS Power coated of necessary...

11kV/3/110V/3, 1 Phase metering PT class 1, 100 VA per Phase for measurement of voltage

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., withprovision for fixing suitable type capacity MCB's single phase/3

Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries 100 AH capacity

Distribution Transformer - 3 Phase, 11kV/433V - Stacked CRGO Core with Oil

as per IS-1180 (Part-1): 2014

LT Protection Kit

(Dwg No. BESCOM/GM/QS&S/10 Dtd 24.11.2018)

LT Distribution Box for 250 kVA DTC with MCCB's (Sheet Metal)

(Dwg No. BESCOM/GM/QS&S/08 Dtd 24.11.2018)

10 kV, 5 kA Lightning Arrester Polymeric type with GROUND DISCONNECTOR

11 kV, HG Fuse Unit with Solid Core Insulator

(Dwg No. BESCOM/GM/QS&S/21 Dtd 24.11.2018)

Conventional RMU (VCB Type) with Copper Busbar, 350 MVA, 630 Amps as per IEC

62271/IS-3427 3 Way RMU, 2OD + 1VL (One Incomer + One Breakers

+ One Outgoing)

11 kV [6.35/11 kV(E)], HT Aerial Bunched Cable XLPE insulation confirming to IS

14255: 1995 3x95 + 1x70 Sqmm (Insulated Messenger Wire)

Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and

3300 mm depth and using 50x6 mm flat welded to ground rod as terminal & connected to equipment ...

Instrument Transformer (PT & CT) as per IS 2705 Part-1&2 11KV CT (Secondary - 1A) for 3 Phase 4 Wire

Metering, Burden: 2.5 VA, 0.2 Accuracy Class Ratio: 1.25/1A to 2.5/1A

1 kV HT Metering cubicle of different CT Ratio, Both side cable entry type with 3 CT & 3 PT, With

Transparent Cover TTB, with 30x8 mm Copper Busbar, Modem & 2 No of Meters for 3 Phase 4 Wire Meterin...

Load Break Switch with Panel

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath

Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip

thickness and resistivity as per IS-3975

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...

Providing and fixing the tensile membrane made from Germany make, make Mahler, valmex FR 900TYPE , with 100% white color, PVDF- lacquer on both side, protected against microbial and fungal attack, UV-...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Providing and fixing Structural Steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel prim...

Providing & fixing corrugated G.S. sheet roofing including vertical /curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G....

Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

Providing UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying tru...

Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 andlatest ammendments, electrical resistance welded steel tubes, ma...

Providing and laying at site of work MS casing caps as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum)...

Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary am...

Providing, Laying and Fixing of GI pipes conforming to IS 1239 1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...

Labour charges for Erection of new / repaired submersible pump set along with GI pipes (32mm / 50mm), cable (New submersible pump set if required will be supplied by the department free of cost and re...

Supplying and drawing 3core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirmingto13:8130-1984andvirging r...

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50mm

G.I. Union 50 mm nominal bore

Supply and delivery at site wrought middle steel (galvanized) GI elbow confirming to IS 1239-II, 1991 with latest amendments if any for:For 50 mm dia GI elbow

Supply and delivery at site wrought middle steel (galvanized) GIhexagonal nipple confirming to IS 1239-II, 1991 with latest amendments

if any For 50 mm dia GI hexagonal nipple

Providing wrought mild steel (galvanized) GI collar confirming to IS1239-II, 1991 with latest amendments if any.For 50 mm dia GI collar

Fabricating supplying and mounting MS box made out....SWG suitable for floor/wall mounting,fully weather proof with provision for better heat dissipation,provided with hinged front cover,equipped with...

Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not morethan 2pieces and fixing the same to the wallusingtaperedinvertedwooden plugsscrews 20" x 20" x 2.5...

Supplying & fixing miniature circuit breakers on existing MCB distribution boardsusing necessary fixing material sand'C'Typecurve,indicatorON/OFF,energycross-3with Short circuit breaking capacity of10...

Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...

Single phase preventer (SPM)

Wiring for lighting/power circuit using one of FRLS PVC insulated1100Vgrade,multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specifiedIS-694...

Supplying,fixing and wiring heavy duty low voltage capacitors conforming to IS2834.3phase,400/440Vgrade,for power factor improvement of rotating machineries like induction motor.

Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of sa...

Digging of Pit Digging of Pit 1.8 Mtr depth for errection of 9 to 10 Mtr Long Steel/RCC/PSCC supports as per approved Drawing.Ordinary Soil

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...

Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipments including providing cement concrete foundation bed etc., com...

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...

1.1 kV Class Armoured Aluminium Cable with glands/lugs/ferrules :4C x 6 Sq mm

Supplying & fixing of Porcelain fuse channel with cutout on existing wooden/panel using necessary nuts, bolts and washers 32 A

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :25 to 40 mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...

Supplying and Installation of HIK-VISION iDS-7216HUHI-M2 complete as per the direction of engineer in charge

Supplying and Installation of HIK-VISION 5MP DS-2CEIAHOT Bullet Camera complete as per the direction of engineer in charge

Supplying of HIK-VISION 5MP 76 HOT-ITPFS Dome camera complete as per the direction of engineer in charge

Supplying and Installation of ERD 8 Channel power supply complete as per the direction of engineer in charge.

Supplying and Installation of 4TB Seagate skyhawk Survelliance HDD complete as per the direction of engineer in charge

Supplying and Installation of PVC Box 5x5, DC Pin, BNC Connectors complete as per the direction of engineer in charge

Supplying & Fixing of switch mounting rack with power manager & Cable manager 24U with 650mm depth

Supplying and Installation charges for cameras, DVR, CCTV Rack, Transportation & Mobile view configuration complete as per the direction of engineer in charge

Supplying fixing of Network Switches: 48 Port Gigabyte (manageable)

Demolishing brick work manually/ by mechanical means including stack ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in...

Demolishing brick work manually/ by mechanical means including stack ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in...

Earth work excavation for foundation of structure upto 3 mtrs. By mechanicle means as per drawing and technical specification, including setting out, providing shoring, strutting and bracing, removal ...

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with

vibratory roll...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto3.50 m height. The g...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per s...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in require...

Fabricating,providing and erecting in position of MS Hot Dip Galvanized Sq.Hallow Poles of 132 x 132 Heavy gauge of length 3000mm with MS.Hot dip galvanized grill work as per approved design and drawi...

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...

Providing and fixing pre cast solid cement concrete kerb stones made out of CC 1:2:4 with top and bottom width 114 and 165 mm respectively, 400mm high and 450mm in length finished with CM 1:3 plasteri...

Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces.Painting Two Coats on New Concrete Surfaces.Item No.8.10,Page No.56, Vol III S...

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne...

Supply and fixing of SFRC machinhole cover (Medium Duty) made as per IS to suit existing damaged machinhole cover after removing the debries from inside and outside the existing machinhole etc. with a...

Chain link fabric fencing mesh of size 50x50 mm made of G.I. wire of dia

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as a...

BESCOM Deposite and Charges