REPAIR MAINT TO HARD STANDING FLOORING ROOF JOINERIES AND PERIODICAL WORKS AT OFFRS MD ACCN AND REPAIR TO WOODEN ALUMINIUM STEEL JOINERY AND CONNECTED WORKS IN NHL AND OHL AREA UNDER GE (EAST) MATHURA

Amount

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 100mm thick cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as in sub base, sub floor and paving etc complete all as specified and as directed.

M&L for sand cushioning 25 mm thick spreed over cement concrete surface complete all as specified and as directed.

M&L for Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade complete all as specified and as directed.

Material & Labour for road side kerbs factory made Precast cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) n exc 100 mm in width & set in cement mortar 1:4 complete all as specified and as directed.

M&L non skid coloured cermic ENDURA tiles10mm thick area of each tile exc 0.06 Sqm but n. exc. 0.11 Sqm set and jointed in neat cement slurry & pointed with coloured cement to match the colour of tiles as in laid in floor over and including 15 mm thick screed bed in CM 1:4 complete all as specified and as directed.

M&L for glossy finish chequred cement concrete tiles of size 30cm x 30cm x 25mm with grey cement and pigments, set jointed and pointed in neat cement slurry in floors laid over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M&L for 50 mm thick cement concrete 1:3:6 type B1 (using 20 mm graded stone aggregate) as in plinth protection, finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed.

Demolition of brick work or stone boulder masonary built in cement mortar including all quoins arches, pillars etc. but excluding ashlar facing dressed stone work and precast concrete articles and removing rubbish upto a distance of n exc 50 mtr complete all as specified and as directed.

M&L for Brickwork using old size fly ash bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for providing precast cement concrete type B0 1:2:4 (using 12.5 mm graded stone aggregate) as in louvers and jallies 40mm thick including all mouldings set in CM 1:4 complete all as specified and as directed.

M&L for preparation of old plastered or unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soots and efflorescence salts, removing nails and making good and applying one coat of white wash complete all as specified and as directed.

M&L for preparation of old plastered surface of walls and applying two coat of white wash complete all as specified and as directed.

M&L for preparation of old plastered surface of ceiling and applying one coat of white wash complete all as specified and as directed.

M&L for preparation of old plastered surface of wall and applying one coat of colour wash complete all as specified and as directed.

M&L for complete removal of existing treatment of old plastered surface of wall and applying two coat of colour wash complete all as specified and as directed.

M&L for preparation of old plastered or unplastered surface of wall and applying one coat of cement base paint complete all as specified and as directed.

M&L for complete removal of existing treatment of old plastered or unplastered surface of wall and applying two coat of cement base paint complete all as specified and as directed.

M&L for prepration of old plastred surface of wall/over roof and applying one coat of weather proof acrylic exterior paint (100% Acrylic) including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.

M&L for complete removal of existing treatment of wall /over roof and applying two coats of weather proof acrylic exterior paint (100% Acrylic) over a coat of self primer including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.

M&L for preparation of old plastered or unplastered surfaces of walls by washing, rubbing down, stopping of distempered or painted surfaces, removing nails and applying one coat of oil bound distemper complete all as specified and as directed.

M&L for complete removal of existing treatment of wall and applying two coats of oil bound distemper complete all as specified and as directed.

M&L french polishing on old surfaces of any description, width or girth including cleaning and preparing the surface with single coat complete all complete all as specified and as directed.

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Taking down cement plaster of any description from brick wall or concrete surface including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 mixed with liquid WPC as per manufacturers instructions finishing the surface even and fair complete all as specified and as directed. Note : Liquid WPC shall be mesured & paid separately under relavent item of this BOQ.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of white wash complete all as specified and as directed.

M&L for preparation of newly plaster surface of wall and applying two coats of weather proof acrylic exterior paint (100% Acrylic) over a coat self primer including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of brick wall/concrete surface in cement mortar 1:6 finished even & smooth without extra cement complete all as specified and as directed.

M&L for providing damp proof layer in two coats of acrylic polymer coating consisting of 1 part of acrylic polymer liquid mixed with 2 parts of cementious powder applying at the rate of 1.40 Sqm/ Kg of mix per coat. Second coat should be applied after 4-6 hrs of first coat, 5 days curing is to be carried out to the surface before providing plastering. Note : Make of the material 'Smart Care damp block 2K' of Asian paints or equivalent from Dr Fixit, STP, CICA etc. as approved.

M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper complete all as specified and as directed.

M&L for providing 1mm thick wall care putty on plastered surfaces of walls complete as specified and as directed.

M&L for rendering 10mm thick on fair faces of Brick work or concrete surface as in ceiling in cement mortar 1:3 finishing the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new plastered surface of ceiling and applying three coats of white wash complete all as specified and as directed.

Supply only Liquid water proofing compound of approved make all as specified and as directed.

M&L for removal of plants with roots from roof/ wall/ shafts at any height and applying HCL chemical and filling hole with cement concrete 1:2:4 minimum 0.05 cum in each location and finished properly with matching to the existing surounding area complete all as specified and as directed.

M&L for obliterating old writing building number with synthetic enamel paint n.exc 0.10 Sqm and match the existing work including preparation of surface all as specified

M&L for writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm high complete all as specified and as directed.

Demolition of reinforced cement concrete as in cover slabs/chajjas and similar structures of any description, removal of debris to beyond MD land complete all as specified and as directed.

M&L for 50mm thick sand stone slab as in chajja /cover slab set and jointed over supports in cement mortar 1:4 complete all as specified and as directed.

M&L for providing, cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) in coping, coving, roof padding, as directing mixed with liquid water proofing compound complete all as specified and as directed.

S&F rolled mild steel joist, channel, angle or Tee section fixed independently without connecting plate etc cut to ordinary length i.e. within 20 mm of length indicated) of Fe 410 Gde E-250 quality complete all as specified and as directed.

M&L for complete removal of existing treatment on surfaces of brick, stone, concrete or plaster surfaces of (any description) over 10cm girth or width, applying two coats of synthetic enemal paint (ordinary tint) and complete all as specified and as directed.

Demolition of roof treatment including PCC/brick tiles, mud phuska PCC padding, plastering, APP membrane complete treatment of any thicknesss and in any position and removing the demolished material out of MoD land complete all as specified and as directed.

M&L for 40 mm average thick cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregate) in floors/ roof padding finishing the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for Cutting grooves in brick wall, 75mm wide and 65mm deep for fixing joist,angle, channel section and sandstone slab in chajjas upto G+2 floors and finishing face of groove with cement mortar 1:3 complete all as specified and as directed.

M&L for bitumen felt water proofing treatment using APP based polymeric membrane minimum weighting 3kg/sqm and minimum thickness 3mm reinforced with polyster non wove fabric (but not less than 150gms/sqm) laid over bitumen primer applied @ 0.30 Kg/sqm by forced application complete all as specified and as directed.

M&L for cement concrete tiles 25cm x 25cm x 22mm thick, with grey cement and no pigments, machine pressed, set in neat cement slurry in floor over and including 20 mm thick screed bed in cement mortar 1:6 and filling the joints with Tile Max premium cementitious grout material of JK Cement or its equivalent complete all as specified and as directed.

S&F in repair PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls with and including necessary clamps complete all as specified and as directed.

S&F in repair 110 mm dia PVC (SWR) bends any radius with oval access door complete all as specified and as directed.

S&F in repair 110 mm bore PVC (SWR) branch piece double (double T) equal or un equal provided with access door complete all as specified and as directed.

S&F in repair 110 mm bore PVC (SWR) branch piece double (double Y) equal or un equal provided with access door complete all as specified and as directed.

S&F in repair 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with suitable MS clamps complete all as specified and as directed.

S&F in repair 75 mm dia PVC (SWR) bends any radius complete all as specified and as directed.

S&F in repair 75 mm bore PVC (SWR) branch piece double (double Y) equal or un equal provided with access door complete all as specified and as directed.

S&F in repair 75 mm bore PVC (SWR) branch piece double (double T) equal or un equal provided with access door complete all as specified and as directed.

S&F in repair PVC (SWR) pipes 40 mm bore single socketed in any length with rubber ring joints fixed to walls with and including necessary clamps complete all as specified and as directed.

Taking down chowkhat or frames with shutters w/o taking off shutters from frame area n.exc 1.50 Sqm each complete all as specified and as directed.

Taking down chowkhat or frames with shutters w/o taking off shutters from frame area 1.5 Sqm but n.exc 4.00 Sqm each complete all as specified and as directed.

Taking down shutters of any description n exc 1 sq.m each complete all as specified and as directed.

Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and as directed.

M&L for Pressed steel frames of size125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. supplied and fixed complete all as specified and as directed.

S&F Pressed steel frames of size 105x60 mm made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with one shop coat of red oxide primer complete as specified and as directed.

M&L cement concrete type C-0 1:3:6 (using 12.50mm graded stone aggregate) as in bed blocks for fixing hold fasts and fillling of back of pressed steel frame etc. complete all as specified and as directed.

Cutting holes in existing wall or PCC Block masonry built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfast and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required depth of embedded portion of holdfast or lugs measured from the face of jamb into the wall exceeding half brick but not exceeding one brick complete all as specified and as directed.

S&F 35 mm thick factory made flush shutters, solid core construction with block board core and plywood face panel veneer type on both side complete all as specified and as directed.

S&F 35mm thick factory made IInd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), divided into squares with edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) fitted to chowkats complete all as specified and as directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification complete all as specified and as directed.

S&F factory made solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification complete all as specified and as directed.

S&F aluminium anodised barrel tower bolts 200 mm long of extruded section and fixed complete all as specified and as directed.

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts 250mm long of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F extruded aluminium handles of size 150mm long fabricated type anodised complete all as specified and as directed.

S&F in repair 100mm long mild steel Butt hinges, medium weight, cold rolled complete all as specified and as directed.

S&F 125 mm long extruded aluminium alloy Butt hinges with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed.

S&F floor door stopper of aluminium alloy body and tongue anodised overall length of cover plate 150mm with hard drawn steel spring, fixed in floor complete all as specfied and as directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples. complete all as specified and as directed.

S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings framework of water tanks and similar work conforming to Fe-290, Gde-E-165 complete all as specified and as directed.

S&F steel window with side hung shutters including projecting type hinges with steel handle, and steel peg stay complete including MS grill of 12mm dia bar/glazing bar/without glazing bars with a shop coat of red oxide primer all as shown on TD drgwaing complete all as specified and as directed.

S&F in repairs 4mm thick sheet glass ordinary quality exc 0.50Sqm but not exc 1.00Sqm each pane including necessary cleats, glazing clips rubber packing, anodised aluminium snap beading, screws in aluminium windows complete all as specified and as directed.

S &F in repairs 4 mm thick pin headed/figured/frosted glass ordinary quality and glazing with oil putty/wooden beading in square n.exc. 0.5 sqm in each pane complete all as specified and as directed.

M&L for repairing steel windows and ventilators hinges, brackets, steel handle, etc by spot welding at site complete all as specified and as directed.

S&F in repairs 100 mm long MS Butt hinges cold rolled mild steel medium weight fixed to MS pressed steel chowkhats including necessary welding and making good of damaged portion etc complete all as specified and as directed.

S&F in repairs aluminium extruded section body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as sepcified and as directed.

S&F 18 mm thick Rajshri solid PVC Kitchen PVC Sheet one side prelam sheet kitchen/ cupboard cabinet shutter of density 600 kg/cum bent at 90 degree as per modular kitchen and finish all edges at level for making edge lipping/ bending or 0.5 mm thick PVC sheet lipping at all four edges using bonding lape etc complete all as specified and as directed.

S&F Factory made Rajshri PVC Cabinet of required size fabricated by joining 12 mm thick PVC celuka ply fixed with each other using solvent cement fixed with screw and solvent cement adhesive etc complete all as specified and as directed.

S&F 18mm thick factory made Rajshri PVC shelf/ partion of required size consisting of panel of celuka PVC ply and for supporting the hold of shelf /partion and shall provided 3 edges in size18 mmx 18mm as per required lengththe front side of the edge visible in the front of the shelf /partion to be edge lipped by 18 mm widthx1mm thick PVC sheet of density 600 kg/cum manufactured complete all as specified and as directed.

S&F in repair Magnatic catcher (KTS-20) full extension load capacity 8 kgs complete all as specified and as directed.

S&F in repair stainless steel handles, cast type polished bright of 100 mm size for kitchen cabinet shutters complete all as specified and as directed.

S&F in repair extruded stainless steel handles, cast type polished bright of 150 mm size for cupboard shutters complete all as specified and as directed.

S&F in repair auto closing hinges 35 mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete all as specified and as directed.

S&F in repair Continuous (piano) hinges, mild steel, bright finish or electrogalvanised Width of flaps 40mm (When open) complete all as specified and as directed.

S&F stainless steel Tower bolt 150 mm size for kitchen cabinet shutter complete all as specified and as directed.

M&L resecuring or easing & adjusting without taking down door shutter of any description not exc 1 sqm each complete all as specified and as directed.

M&L resecuring or easing & adjusting without taking down door shutter of any description exc 1 sqm but not exc 2.00 sqm each complete all as specified and directed.

M&L for prepration of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primer surface complete all as specified and as directed.

S&F to the frame at site, factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be coverd with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail of either side and as gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed in the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube but single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S&F Aluminium frame/Aluminium grills powder coated (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.

M&L for powder coated aluminium door shutters (thickness or powder coating shall not be less than 50 microns of approved colour) aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, lock with 2 keys, anodized aluminum snap beading screws etc. complete all as specified and as directed.

M&L Powder coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.

S&F 5.5 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each pane complete all as specidfied and as directed.

S&F 5 mm thick sheet glass ordinary quality and glazing with rubber beading in square n exc 0.50 Sqm in each pane complete all as specidfied and as directed.

S&F rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with & including either hooks, hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails & guides) hanging also fastening and fixing complete of FE 410-W (Gde-E-250) qualit A complete all as specified and as directed.

S&F 18-19 mm thick Prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations with 10mm thick teak wood lipping fixed to timber frames complete all as specified and as directed.

M&L teak wood lipping, 6mm thick fixed with nails to 25mm thick block board or veneered particle board for external surfaces complete all as specified and as directed.

S&F 100 mm long size of hinges, extruded aluminium alloy with galvanised mild steel hings pin anodized and fixed type B-21complete all as specified and as directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay complete with glazing bars dovetailed or welded fixed to wall complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal or wooden frame, glazed with putty or fixed with beads complete all as specified and as directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty n.exc 0.50 Sqm in each pane complete all as specified and as directed.

S&F 3 mm thick figured glass pin head type and glazing with oil putty n.exc 0.50 Sqm in each pane complete all as specified and as directed.

S&F in repair 2nd Class hard wood plain fillets square/ rectangular or trianguar in section, sectional area exc 6 Sqcm but n.exc 13 Sqcm, clean sawn and fixed with nails complete all as specified and as directed.

S&F in repair aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts 250mm long of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F in repair extruded aluminium handles of size 150mm long fabricated type anodised complete all as specified and as directed.

S&F in repair aluminium anodised barrel tower bolts 100 mm long of extruded section and fixed complete all as specified and as directed.

S&F in repair aluminium anodised barrel tower bolts 200 mm long of extruded section and fixed complete all as specified and as directed.

S&F in repair 300 mm size mild steel rat tail rod pattern door springs ISI marked including roller & roller plate etc complete all as specified and as directed.

S&F in repair 100 mm size mortice lock of brass, vertical type, 4 levers, complete all as specified and as directed.

S&F in reapirs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

S&F in repair floor door stopper of aluminium anodised body and tengue, anodised with hard drwan steel spring overall length of cover plate 140 mm complete all as specfied and as directed.

S&F in repair Aluminium (die cast) body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg complete all as specified and as directed.

S&F in repair mild steel handle for steel window etc complete all as specified and as directed.

M&L for spot welding in repair n exc 2.5 cm in length thickness of metal to be welded not exc 6mm for fixing hinges/handle/bolts/helical door spring to iron surfaces etc. complete all as specified and as directed.

S&F in repair 25 mm dia stainless steel drapery rod cut to size and fixed in position including end caps, roller and brackets fixed to wall complete all as specified and as directed.

S&F in repair 100 mmsize aluminium anodised Hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

S&F in repair aluminium anodized barrel tower bolts 75 mm length of bolt of extruded section and fixed complete all as specified and as directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation, etc) or insulation board/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

S&F anodised aluminium snap grid(size605x605mm) frame work for false ceiling including Hangers 6 mm dia GI (upto 1200 mm length) adusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and as directed.

M&L for 4 mm thick non-asbestos fibre cement building board having fire resistance & moisture resistance properties fixed to aluminium grid with screw complete all as specified and as directed.

Demolition of Stone slabs and tiles of any description or thickness (except ceramic tiles) in floors, aprons etc. laid, bedded and pointed in any mortar complete all as specified and directed.

M&L for 20 mm thick Granite slab work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like laid over and including 20mm thick screed bed in cement mortar 1:4 and pointing in white cement (1:2 )using marble dust with admixture of pigment to match with shade of granite, including rounded/half rounded edge and providing hole for gas pipe in pre-cast slab as well as in granite slab of cooking platform complete all as specified and as directed.

M&L for Preparation of new wooden surface of any description not otherwise described over 10 CM width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and as directed.

ARCHI ENGINEERS

NAYYAR BUILDERS N ENGINEERS

mh enterprises

M/S ANIL KUMAR

M/S PREETI CONSTRUCTION

M/S CHAUDHARY CONSTRUCTION

M/s Hoti Lal Contractor

JWALA ELECTRIC CONTRACTORS

Ms Kamal Kant Agarwal