CA NO. GE W/HSR-092024-25 REPAIR TO PLASTERING AND BRICKWORK

Amount

M&L for preparing the old plastered surfaces of walls including cornices by brooming down or steel wire brushing scrapping down or steel wire brushing scrapping down smoke soot etc. and applying one coat of cement base paint on external wall surface to give uniform and smooth surface complete all as specified and directed.

M&L for preparing the old plastered surfaces of walls including cornices by brooming down or steel wire brushing scrapping down or steel wire brushing scrapping down smoke soot etc. and applying one coat of oil bound distemper on internal wall surface to give uniform and smooth surface complete all as specified and directed.

M&L for preparing the old decorated plastered /un plastered surfaces of ceiling including cornices by brooming down or steel wire brushing scrapping down or steel wire brushing scrapping down smoke soot etc. and applying one coat of oil bound distemper on ceiling surface to give uniform and smooth surface complete all as specified and directed.

Preparing old plastered or unplastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

M&L for preparing old painted wood or wood base surface of any description over 10cm width or girth and apply one coat of synthetic enamel paint complete complete all as specified and directed.

M&L for preparing old painted steel and iron surfaces of any description over 10cm width and girth and apply one coat of synthetic enamel paint complete all as specified and directed.

M&L for Complete removal of existing treatment, washing down and stopping of distempered and painted surfaces by using electrical operated grinder and M&L applying two coats of exterior emulsion paint of make : weather coat of Berger / apex utima of Asian paints / Xtrapremium of Shalimar , over and including of a coat of exterior wall primer over 02 mm thick (average )acryllic wall care putty as aprproved by Manufacture complete all as specified and directed. NOTE: The work under this item shall be carried out by contractor from authorised applicator of manufacturer. The contractor shall also stand for gaurantee of the quality and finish of work under this item for period for a period of five years from certified date of completion of complete work for which an amount Rs 20/Sqm of quantity of work done under this item shall be retained in final bill. This amount shall be returned only after completion of gaurantee.

M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 is to be finished even and smooth (without using extra or cement) including taking down plaster complete all as specified and directed.

M&L Rendering 15mm thick on other then fair faces of brick work or concrete surfaces in CM 1:4 is to be finished even and smooth with water proofing compound (without using extra cement) incliding taking down plaster complete all as specified and directed.(Note : WPC shall be measured and Paid separtely)

Supply only Integral water proofing compound complete all as specified and directed.

M&L for 10mm thick rendering in cement 1:3 on fair faces of concrete surface with finished surface even and smooth in ceiling/ RCC water tank & sunshade, chajjas etcincluding taking down plaster complete all as specified and directed.

M&L Rough cast plaster as specified (rendering coat not less than 10 mm thick in C:M 1:3 , while it is still in pastic state the rough cast mixture consisting of crushed stone or fine gravel agg size 6 to 12 mm mixed with coarse sand and cement in the ratio of 1:1 shall be applied and finished even) including taking down cement plaster of any description complete all as specified and directed.

M&L Preparing new plastered surfaces of wall and applying two coats of distemper oil emulsion over chalk whiting, white or tinted complete all as specified and directed.

M&L Preparing new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistance primer complete all as specified and directed.

Preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L Vitrified coloured Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar 1:6 for laying floor finishes including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed.complete all as specified and directed.

M&L for vitrified ceramic tiles 10mm thick light shade (square/rectangle) polished , area of each tiles n.exe 0.36 sqm on vertical surfaces of wall etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick cement plaster 1:4 including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed.complete all as specified and directed.

M&L Vitrified coloured Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.42 Sqm not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar 1:6 for laying floor finishes including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed.complete all as specified and directed.complete all as specified and directed.

M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar 1:6 for laying floor finishes including dismantling of tile of any description complete all as specified and directed.

M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar 1:6 for laying floor finishes including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed.complete all as specified and directed.complete all as specified and directed.

M&L Glazed ceramic coloured tiles (Designer) in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4 backing coat for fixing wall tilesincluding dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed.complete all as specified and directed. complete all as specified and directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 15 mm thick screed bed in cement mortar 1:6 for laying floor finishes including demolition of Stone slabs and tiles of any description or thickness infloors, aprons etc complete all as specified and directed.

M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed including 10mm thick rendering in cement mortar 1:4 backing coat for fixing including demolition of Stone slabs and tiles of any description or thickness infloors, aprons etc complete all as specified and directed.

M&L, 20mm thick granite stone slabs table rubbed and polished as in cooking plate forms/ cill over and including 15 mm thick screed layer in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of stone including demolition of Stone slabs and tiles of any description or thickness infloors, aprons etc complete all as specified and directed.complete all as specified and directed.

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L 75mm thick Cement concrete type C-2, 1:3:6 (40mm graded aggregate) as in plinth protection complete all as specified and directed.

M&L 100mm thick Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as sub base under floor complete all as specified and directed.

M&L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment over 25 mm thick sand cushoning complete all as specified and directed.

M&L coloured Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry including 15 mm thick screed bed in cement mortar 1:6 for laying in floors complete all as specified and directed.

M&L 100mm thick Cement concrete type C-2, 1:3:6 (40mm graded aggregate) as hard standing complete all as specified and directed.

M&L Brickwork with subclass ‘B’ old size bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 including demolition of brick work complete all as specified and directed.

M&L 15mm GI steel Tubes, 'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors in repair complete all as specified and directed.

M&L 20mm GI steel Tubes, 'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors in repair complete all as specified and directed.

S&F in Repairs 15mm dia chromium plated fancy type Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs Wash basins, Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed.

S&F in Repairs 15mm dia Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in Repairs 15mm dia chromium plated fancy type Stop valves/angle valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in Repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide\ with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in Repairs Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repair 10 litres, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including seat and cover complete all as specified and directed.

S&F in Repairs 15mm dia, Fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in Repairs Brass chromium plated shower rose with or without swivel joints, any size, including fixing to steel pipe or union 125mm size complete all as specified and directed.

S&F in Repairs Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in Repairs Health faucet (ABSBody) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connection and fixed in position in all respect complete all as specified and directed.

Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters) complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specification & drawing complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick ,with particle board core(stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F 100mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F Aluminium handles 100mm long, cast type,anodised complete all as specified and directed.

S&F Aluminium anodised, barrel tower bolts 150mm of extruded section and fixed complete all as specified and directed.

M&L Cement concrete Type D2 1:4:8 (40mm graded arrregate) as in,filling and mass concrete in sunken portion including demolition of cement concrete complete all as specified and directed.

M&L for treatment of sunken floor slab comprising of the following specifications complete all as specified and directed :- (i) Cleaning the sunken/lowered portion of RCC slab surface (including vertical total depth plus skirting height) of floors by wire brush, chisel out any mortar sticking to the surface and brooming completely. Provision of 40mm thick avg PCC 1:2:4 type B-0 using 12.5mm graded aggregate as in padding conc to achieve proper slope including cutting holes in bricks or RCC wall for spout. (ii) Rendering of uneven surfaces with 6mm thick CM 1:4 mixed with and including integral water proofing compound Sika Plastocreat plus or equivalent make in Fosroc / Thermax as approved by GE @ 0.2% by wt of cement consumed including filling it with water to check dampness and seepage and where dampness / seepage is noticed, nozzles shall be fixed and grouting carried out. (iii) All junctions points of side wall where CI/GI pipes are passing through shall be sealed with epoxy puty Sikagard 694 F (I) or equivalent make in Fosroc /Thermax as approve by GE. (iv) After drying putty, wash the slab and sides of sunken portion with water andmake it clear and clean. (v) Applying two coats of polymer modified cementious water proof coating with Sika Topseal 107 or equivalent make in Fosroc / Thermax as approved by GE in two coats @ 3kg/sqm to sandwiched with glass fibre reinforcement : Sika® Fab-1 or equivalent make in Forsro / Thermax as approved by GE over base coat as per manufacturs instruction to bottom and vertical sides up to finished floor level+100mm height. The thickness of two layer shall be 1mm. When the second layer is still sticky, coarse sand spray shall be carried for the vertical and bottom surface of the sunken portion. (vi) Plaster the bottom and sides up to bottom of the skirting with minimum 20mm thick CM 1:4 mixed with integral water proofing compound SIKA plastocreat Plus or equivalent make in Fosroc / Thermax as approve by GE @ 0.2% by wt of cement consumed as per manufacturer's specification including rounding of corners and junctions sloping towards spout. (vii) All pipes laid in sunken portion shall be covered with 50mm thick PCC 1:3:6 all round after painting with anticorrosive paint

S&F PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F in repair single piece-WC with UF soft close seat cover hinges fixing accessories set and accessories set, cistern fitting size 715x370x790mm consealed S trap) complete all as specified and directed. Make: Cera cat pat no CAPSTAN-2068,2368,2268. or equalivent

S&F in repair cabinet with mirror of size 600x450mm make commender as per sample approval complete all as specified and directed.

S&F PVC (SWR) bend 110mm dia Any radius complete all as specified and directed.

Supply and fixing in repair rotational moulded polyethylene water storage tank three layer white 500 litre capacity, triple layer (Cylinderical vertical with closed top) hoisted kand fixed in position complete all as specified and directed.

Supply & fixing in repair 1000 litre capacity ISI marked double layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including making inlet/outlet connection complete all as specified and directed.

S&F Ball valve 20mm bore high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed, (minimum weight 210 gms) complete all as specified and directed.

S & F in repair gun-metal, globe or gate valves of 20mm thick, with iron wheel head, screwed both ends for iron pipe and fixed etc complete all as specified and directed.

S&F in repair vitreous China urinals, full stall type, white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets,flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

Demolition of Brick tiles or terracing tiles, single layer on roofs complete all as specified and directed.

Demolition Mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.

M&L Providing, cement concrete Type B0 1:2:4 (12.5mm graded aggregate) in roof kerbs/Padding in slope 1:40, rounded or chamfered on edgesall complete all as specified and directed.

M&L for applying roof treatment on top of roof with APP based polymeric membrane (not less than 3mm thick , weight not less than 3.5Kg per Sqm, reinforced with polyster non-woven fabric ( weigthing not less than 150 gm/ Sqm ) laid by torch application method with side overlap 75mm and on end 100mm as per manufacture's instructions over a coat of hot paving bitumen of grade 30/40 conforming to IS 73 @ 1.2 Kg/ Sqm over a coat of bituminous primer conforming to IS -1984 @ 0.40 Kg /Sqm and applying two coats of aluminium paint over APP membrane over and incl 15mm thick plaster in cm 1:4 using liquid WPC as per manufacture instruction over RCC roof complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre lineover fittings and accessories) complete all as specified and directed.

S&F PVC (SWR) pipes110mm dia single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

Taking down shutters exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed.

Taking down chowkats or frame with shutter,of doors and window, without taking off shutter from the frames area exc 1.5 sqm but not exc 4sqm each complete all as specified and directed.

S&F pressed steel frames 105x60mm for doors with one or more rebates including one shop coat of primer necessary fixing lugs, 100 mm medium weight cold rolled hinges 3 Nos to each shutter and one 50mm medium weight hinge for door cleat, lock strike plate,including Cement concrete 1:3:6 type C1 20mm graded stone aggregate as filling of pressed steel frame and hold fast block etc complete all as specified and directedetc., complete all as specified and directed.

S&F factory made plain framed, panelled shutter 35mm thick made of 2nd class Hard wood of 35 mm thick(two panels) with lock rail and panel of 12 mm veneered particle board with commercial veneering on both faces. The size of rail and styles as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35mm thick glazed and skelton shutters open rebated and prepared to receive gauze etc (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred breds for securing glass etc sizes of members of shutters as specified in SSR Pt-I Sec 8 Clause 8.20 (a) in 2nd class hard wood complete all as specified and directed.

S&F Galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F Galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples fixed in repair complete all as specified and directed.

M&L two coats of synthetic enamel on wood (ordinary tint) over one coat of pink primer over 10cm width or girth including preparation of surface complete all as specified and directed.

S&F Aluminium handles 150mm long, cast type,anodised complete all as specified and directed.

S&F Aluminium anodised, barrel tower bolts 200mm of extruded section and fixed complete all as specified and directed.

S & F aluminium alloy anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheets cast or extruded section and fixing bolts of extruded section or cast aluminium alloy 250 mm size complete all as specified and directed.

M&L Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F Powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, Powder coated aluminum snap beading screws etc complete all as specified and directed.

M&L Sheet glass,5.5mm thick ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and directed.

S&F Aluminium Extruded section Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters fixed in repair complete all as specified and directed.

S&F Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications including Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

Hacking out old broken glass any thickness size, quality or description from wooden/steel frames fixed with wooden beads/metal pinning and S&F 3 mm thick sheet glass in squares not exc 0,5 sqm in each pane fixed with wooden beads or putty (in metal frames etc), complete all as specified and directed.

S&F in repair stainless steel sink without drainage board made of stainless steel of 1 mm thick for kitchen with plugs, washer and wates including bedding in cement morter to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 495mm x420mm and bowl size 410mm x 330mm x 160 mm, complete all as specified and directed.

S&F Steel windows (Box type) with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded including taking down of old window/ventilator complete all as specified and directed.

S&F Steel windows (Box type) with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded including taking down of old window/ventilator complete all as specified and directed.

S&F Chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming toFe-290 Gde E-165 complete all as specified and directed.

S&F Sheet glass, 3mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

S&F in repair vitreous china squatting pan "ORISSA" pattern size 580mmx440mm, white with integral foot rest including cast iron 'P' or 'S' trap and connection to trap includintg cement concrete, and to flushing pipe, anti-syphonage pipe, etc. including making good to floor, complete all as specified and directed.

Demolition of reinforced cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Precast Reinforced cement concrete type B1 1:2:4 cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:4 complete all as specified and directed.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia orsecuring with clips complete all as specified and directed.

Demolition of Bricks (laid flat or on edge) or brick tiles in floors, channels, kerbs, aprons, etc. (each layer) complete all as specified and directed.

M&L Bricks, sub class B, laid on edge in floors; old size bricks laid dry and pointed in CM 1:3 complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

M&L 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc Fixed with L-type or J-type or crankedhook bolts complete all as specified and directed.

M&L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed.

Preparing new surfaces of steel of any description, over 10cm in width or girth,and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Balaji Construction Co.

M/s Rao Constructions, 1173 Urban Estate-II, Hisar

M/S RAJESH KUMAR & SONS

malik constructions

M/S D.N Choudhary

SHRI HARI BUILDERS

chankaya solutions