REPAIR REPLACEMENT OF POWER SUPPLY FEEDER PILLAR JUNCTION BOXES ETC OTHER ALLIED AREA UNDER GE AF SRINAGAR

Amount

Excavation in trenches n.exc 1.5 M wide and n.exc 1.5 M depth and getting out for laying of underground cable etc in any type of soil complete all as specified and directed Engineer-in-Charge.

Returning, filling in, including spreading, leveling watering and well ramming in layers n.exc 25 cm thick in any type of soil complete all as specified and directed by Engineer-in-Charge.

Removing of excavated soil to a distance n.exc 50 mtr and depositing where directed at a level not exceeding 1.5 m above the starting point, complete all as specified and directed Engineer-in-Charge.

Cutting of existing road for passing cable through roads including re-surfacing of disturbed road surface with 100mm thick plain cement concrete 1:2:4 type B-1 (using 40mm graded crushed stone aggregate) over WBM, complete all as specified and directed by Engineer-in-Charge.

Sand cushioning in trenches spreading and consolidation 8cm thick before laying the cable and 15 cm of sand after laying the cable complete all as specified and directed by Engineer- in-Charge. Note:- Only punned thickness shall be measured and paid.

S&F Galvanised steel tubing, light grade laid in trenches for protection of different sizes of cable laid in trenches for the following dia of tubing, complete all as specified and directed by Engineer-in-Charge. Make: JINDAL/ TATA/ BST/ PRAKASH TUBES

80 mm bore dia

50 mm bore dia

Taking out carefully unserviceable LT under ground cable of following sizes from trenches/Pipes including taking out bricks, complete all as specified and as directed by Engineer-in-Charge. (Serviceable Bricks obtained shall be cleaned and stacked properly for reuse)

16 Sqmm, 4 core

25 Sqmm, 3.5 core

50 Sqmm, 3.5 core

70 Sqmm, 3.5 core

95 Sqmm, 3.5 core

240 Sqmm, 3.5 core

Supplying, Laying, jointing, Testing XLPE insulated armoured under ground cable heavy duty with aluminium conductor LT 1100 V grade of following size cross sectional area, complete all as specified and directed by Engineer-in-Charge Make: Finolex/ Polycab/ Havells/ Gloster

16 Sqmm, 4 core

25 Sqmm, 3.5 core

50 Sqmm, 3.5 core

70 Sqmm, 3.5 core

95 Sqmm, 3.5 core

240 Sqmm, 3.5 core

laying Only XLPE insulated GI wire/ strip armoured Electric power cable heavy duty with stranded aluminium conductor 1100 V grade as retrieved from taking down items, of following size cross sectional area, complete all as specified and directed by Engineer-in-Charge

95 Sqmm, 3.5 core

240 Sqmm, 3.5 core

Supply and Laying of bricks well burnt sub class B (old pattern) laid flat for cable protection width equal to the length of bricks complete all as specified and directed by Engineer-in-Charge.

Laying Only of bricks retrieved from items no. 7.00 here-in-before laid flat for cable protection width equal to the length of bricks complete all as specified and directed by Engineer-in-Charge.

Supply, installation and commissioning and testing of CPRI approved LT panel cubical type of size 1.5x0.6x1.2 Metre suitable for 415 volts 3 phase 4 wire, 50 Hz AC supply system, floor mounted, outdoor type factory fabricated duly powder coated inside and out side, outer cover made out of 3.15 mm thick CRCA sheet, internal cover and partition made out of 2 mm thick CRCA sheet with angle iron 50 mm x 50 mm x 6mm covered from all side with front and back openable, dust, vermin and weather proof including suitable rating copper bus bar for 3 phase 4 wire system, wiring with suitable size copper cable and embeded in brickwork in CM 1:4 not less than 60cm above ground level with suitable foundation for fixing panel of required size in ground with nuts, bolts and washer etc. complete comprising of following including taking out the old unserviceable panel complete all as specified and as directed by Engineer-in-Charge.

Supply, installation and commissioning and testing of CPRI Approved LT panel cubical type of size 1.5x0.6x1.2 Metre suitable for 415 volts 3 phase 4 wire, 50 Hz AC supply system, floor mounted, outdoor type factory fabricated duly powder coated inside and out side, outer cover made out of 3.15 mm thick CRCA sheet, internal cover and partition made out of 2 mm thick CRCA sheet with angle iron 50 mm x 50 mm x 6mm covered from all side with front and back openable, dust, vermin and weather proof including suitable rating Aluminium bus bar for 3 phase 4 wire system, wiring with suitable size copper cable and embeded in brickwork in CM 1:4 not less than 60cm above ground level with suitable foundation for fixing panel of required size in ground with nuts, bolts and washer etc. complete comprising of following including taking out the old unserviceable panel complete all as specified and as directed by Engineer-in-Charge.

Supply & Fixing Feeder piller box out door type ‘factory made’ CPRI Approved, made out from 16 SWG MS sheet supported with legs of 45 cm long made of iron angle 25 mm x 25 mm x 4mm thick of size 75 cm x 60cm x 45 cm with 04 Nos aluminium bus bar of 150 Amps mounted on porcelain insulator duly drilled hole for cable connection including front and rear side opening with locking arrangement with MCCB 250 Amps 35 KA 415 Volts 50 Hz with adjustable thermal and magnetic setting Make: Legrand/ Havells/ ABB and provn for incoming and outgoing cables with glands including spray painting with two coat of smoke grey synthetic enamel paint over a coat of red oxide primer, including dismentalling of old panel complete all as specified and directed by Engineer-in-Charge Note: Feeder pillar box shall be mounted on brickwork in CM 1:4 not less than 30 cm above ground level with suitable foundation, rendering 15 mm in CM 1:6 and two coats of cement base paint and the rates shall be inclusive in the quoted rate.

Supply only LED driver of capcity 15 Watt suitable for 240 volts complete all as specified and directed Engineer-in-Charge. Make- Crompton/ Philips/Wipro

Supply only LED driver of capcity 30 Watt suitable for 240 volts complete all as specified and directed Engineer-in-Charge. Make- Crompton/ Philips/Wippro

Supply only LED driver of capcity 50/60 Watt suitable for 240 volts complete all as specified and directed Engineer-in-Charge. Make- Crompton/ Philips/Wipro

Supply only LED driver of capcity 100 Watt suitable for 240 volts complete all as specified and directed Engineer-in-Charge. Make- Crompton/ Philips/Wipro

Supply only LED driver of capcity 150 Watt suitable for 240 volts complete all as specified and directed Engineer-in-Charge. Make- Crompton/ Philips/Wipro

Supply and filling, topping up of transformer oil in existing position confirming to IS-335183 having dielectric strength upto 40 KV in 2.5 mm gap electrode ( Testing of oil including necessary T&P shall be carried out in the presence of Engg-in-charge by an authorised Agency and testing certificate shall be produced by contractor duly signed.) Make : Gulf/ Indian oil/ Servo/Castrol / Hindustan Petrolium

Supplyu and Fixing LED street light made up of pressure die cast housing with toughened glass and individual high power LED with secondary optics as light source of 45 Watt LED ,(conforming to IP-66) protection and impact resistance of IK-07, including taking down old u/s LED complete with all accessories all as specified & directed by Engineer-in-charge. Make :- Wipro cat part No. LR02-501-XXX-57-G1 or equivalent in performance in Crompton / SURYA as approved by GE.

M&L for painting to LT feeder pillar Box , both sides 440 Volts, 3 phase of any size/ location with two coats of synthetic smoke grey paint complete all as specified and directed Engineer-in-Charge.

Material & Labour for Cable jointing kit for 11 KV (Earthed grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core 120 sqmm complete all as specified and directed by Engineer-in-Charge. Make: Denson/ MSeal(3M) / Raychem/ CABSEAL

Material & Labour for Cable jointing kit for 11 KV (Earthed grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core 120 sqmm complete all as specified and directed by Engineer-in-Charge. Make: Denson/ MSeal(3M) / Raychem/ CABSEAL

M&L for Sub main wiring with two single core, PVC insulated, (ISI marked) , unsheathed, 1100 volts grade, 4.00 sqmm multistranded copper conductor cable drawn into and including suitable size PVC conduit ISI makred medium grade surface type with all accessories and including one single core, 4.00 sqmm PVC insulated multistranded unsheathed 1100 volts grade copper conductor cable as earth wire of the following size as in repairs complete all as directed & specified. Make: Finolex/ Polycab/ Havells/ Gloster

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor cable, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, 10sqmm twin core cable flat or circular complete all as specified and directed by Engineer-in-Charge. Make: Finolex/ Polycab/ Havells/ Gloster

Supply & install and connecting bus bar chamber, factory made, weather and vermin proof having size 200x250x80 mm made out of 3mm thick MS sheet door comprising of 16 Amp 230 volt rated aluminium bus bar fixed on porcelein insulator, making holes on strips for connecting cables and fixed to street light pole with and including MS clamp of size 25x5mm including nut, bolts washers duly painted with 2 coats of enamel paint over a coat of red oxide primer including MCB SP 10A, C curve 10 KA breaking capacity with mounting rail all as specified and directed. Make: Legrand or equivalent in Havells/L&T/ SEIMENS/ SCHNEIDER

Supply & Fixing Cable gland, ISI mark suitable for 630 sqmm, single core cable connection in LT control panel all as specified and directed.

M/S LATIF AHMAD MIR

M/s Jaipal Associates

M/S GULAM AHMAD ABDUL SAMAD

M/S NEW FAROOQ TRADERS

CHINAR CONSTRUCTION TRADERS