REPAIR TO CERTAIN WOODEN AND STEEL FURNITURE ITEMS INSIDE OTM ACCN AT GE RD PASHAN PUNE

Amount

Note for all items :- (a) The site for the proposed work will be the AOR of GE(I) R&D Pashan and the contractor has to make arrangements for repairing/maintenance of the furniture accordingly. (b) Furniture must be transported/shifted for repairing to the BSO yard of GE(I) R&D Pashan from the respective locations and repaired furniture will be delivered to the location from where it was taken out. (c) Contractor has to quote the rates accordingly in order to mitigate the difference arising between the department and the contractor of later date. Any damages arising due to mishandling of furniture, contractor has to replace free of cost up to the satisfaction of the GE. Schedule 'A' Part I POLISHING TO WOODEN FURNITURE :- Material and labour for Removing of old polish of the following wooden furniture by rubbing with and including sand paper of proper size and description and making the surface smooth and clean and polishing on all visual surfaces (internal and external as shown on drawing.) . with wood colour french polish to exposed surfaces with glossy finish complete all as specified and directed by Engineer incharge.( Note- Work Should be done at site given by engineer incharge) (a) Chair Dinning . Drg no- FD-203, 279

(b) Chair Easy. Drg no- FD-201, 229

(c) Chair writing. Drg no- FD-202, 280

(d) Chair WB. Drg no- FD-225, 285

(q) Bed Plywood top. Drg no- FD-245, 246 and 247

(r) Sofa set 4 or 5 seater. Drg no- FD-234,373 and 281

(t) Table center. Drg no- FD-235

(g) Table Dinning 6/8 person of size 1500 mmx900 mmx760 mm. Drg no- FD-239, 376, 273

(e)Table of size 900 mmx600 mmx760 mm. Drg no- FD-284,283

(f) Table writing of size1145 mm x 600 mm x 760mm. Drg no- FD-249, 275,268

(h)Table of size 900 mmx900 mmx760 mm .Drg no- FD-291,DB-3975

(j) Teapoy (W) . Drg no- FD-232, 278

(k) Peg table. Drg no- FD-277, 236

(l) Table Dressing ladies with mirror. Drg no- FD-251

(m) Table Dressing gents with mirror .Drg no- FD-230/379

(n)Table office clerk wooden. Drg no-DB-4120

(o)Table Office officer wooden. Drg no- DB-4119

(p) Table Bed side. Drg no- FD-248, 276

(q) Side Board. Drg No-1112

REPAIRING TO WOODEN FURNITURE (Drg no- FD-202, 279/ FD-285) Chair Dinning CB :- Supply and fix in repair the following new parts/components of Seasoned Teak wood (1st class hard wood) for chair dinning CB as per drawing complete all as specified and directed by Enginee incharge.( Note- Work Should be done at site given by engineer incharge) (a) Fornt Leg of size 55mm x 30mm x 440mm

(b) Rear Leg of size 65mm x 45 mm x 890mm

(c) Side Rail/front rail (Canning patti) of size 65mm x 30mm x440mm

(d) Back Rail of size 45mm x 35 mm x 405mm

(e) Stiffener of size 25mm x 20 mm x 430mm

CHAIR EASY :- Supply and fix in repair the following new parts/components of Seasoned Teak wood (1st class hard wood) for CHAIR EASY as per drawing complete all as specified and directed by Enginee incharge.( Note- Work Should be done at site given by engineer incharge) Drg no-FD-201, 229, DB-3960 (a) Fornt Leg of size 50mm x 25mm x 545mm

(b) Rear Leg of size 55mm x 25mm x 490mm

(c) Side Rail/front rail (Canning patti) of size 55mm x 25mm x 510mm

(d) Arms rest

(e) Back Rail of size 50mm x 25mm x 480mm

(f) Stiffener

Chair writing :- Supply and fix in repair the following new parts/components of Seasoned Teak wood (1st class hard wood) for chair writing as per drawing complete all as specified and directed by Enginee incharge.( Note- Work Should be done at site given by engineer incharge) Drg no- FD-202, 250, 280 (a) Fornt Leg of size 45mm x 45mm x 685mm

(b) Rear Leg of size 65mm x 45mm x 890mm

(c) Side Rail/front rail (Canning patti) of size 65mm x 30mm x 535mm

(d) Back Rail of size 65 mm x 30 mm x 470mm

(e) Arms rest

(f) Stiffener of size 25mm x 20mm x 535mm

Table 900mm x 600mmx 760mm (W)/ Table writing 1145x600x760mm :-Supply and fix in repair the following new parts/components of Seasoned Teak wood (1st class hard wood) for Table of size 900mm x 600mmx 760mm (W)/ Table writing as per drawing complete all as specified and directed by Enginee incharge.( Note- Work Should be done at site given by engineer incharge) Drg no- FD-284, 283/ FD-249,268,254 (a) Leg

(b) Top rail for table of size 900 mmx600 mmx760mm

(c) Bottom rail

(d) Stiffener/Bracket

(e) Table Top 18mm thick particle board (ISI Mark) for table of size 900mmx600mmx760mm

(f) Table Top 18mm thick particle board (ISI Mark) for table of size1145 mmx600 mmx760mm

(g) Top rail short for table of size1145mmx600mmx760mm

Table dinning 6 or 8 person (1500mmx900mmx760mm) :- Supply and fix in repair the following new parts/components of Seasoned Teak wood (1st class hard wood) for Table dinning 6 or 8 person of size1500mmx900mmx760mm as per drawing complete all as specified and directed by Enginee incharge.( Note- Work Should be done at site given by engineer incharge) Drg no- FD-239, 273, 376 (a) Leg of size75mm x40mmx 760mm

(b) Top of size Long rail 25mm x100mm x 1500mm

C) Top short/Bottom rail of size 25mm x 100mm x900mm

(d) Top Stiffner of size 100mm x25mm x 900mm

(e) Table Top 18mm thick particle board (ISI Mark)

Teapoy :- Supply and fix in repair the following new parts/components of Seasoned Teak wood (1st class hard wood) for Teapoy as per drawing complete all as specified and directed by Enginee incharge.( Note- Work Should be done at site given by engineer incharge) Drg no-FD-278/ FD255 (a) Leg of size 60mm x30mm x540mm

(b) Top rai of size20mm x50mmx 600mm

(c) Bottom rail of size 20mm x50mm x 600mm

(d) Stiffner Rail of size 20 mmx40mm x300mm

(e) Teapoy Top 18mm thick particle board (ISI Mark)

Peg table :- Supply and fix in repair the following new parts/components of Seasoned Teak wood (1st class hard wood) for Peg table as per drawing complete all as specified and directed by Enginee incharge.( Note- Work Should be done at site given by engineer incharge) Drg no- FD-277 (a) Leg of size 30mm x50mmx 380mm

(b) Top rail of size 20 mm x 40mmx 450mm

(c) Bottom rail of size 20mm x 40 mm x 300mm

(d) Table Top 18mm thick particle board (ISI Mark)

Table Dressing Ladies with Mirror :- Supply and fix in repair the following new parts/components of Seasoned Teak wood (1st class hard wood) for Table Dressing Ladies with Mirror as per drawing complete all as specified and directed by Enginee incharge.( Note- Work Should be done at site given by engineer incharge) Drg no- FD-251 (a) Drawer with knob

(b) Sliding glass pane 4mm thick for drawer

(c) Looking glass (Make -Atul/Modi/Goldenfish) of size 366 mm x 1220mm x 4mm thick

(d) long rail (Looking glass frame) of size 35mm x 45mm x1220mm

(e) Short rail (Looking glass frame) of size 35mm x 45mm x 366mm

(f) Back ply 6mm thick for back side of glass of size 366mm x 1220mm x 6mm (Green ply)

Table Dressing Gents with mirror :- Supply and fix in repair the following new parts/components of Seasoned Teak wood (1st class hard wood) for Table Dressing Gents with mirror as per drawing complete all as specified and directed by Enginee incharge.( Note- Work Should be done at site given by engineer incharge) Drg no- FD-230/379 (a) Drawer with knob

(b) Looking glass of size 380mm x 760mm x 4mm thick(Make -Atul/Modi/Goldenfish)

(c) long rail (Looking glass frame)of size 25mm x 35mm x1750mm

(d) short rail (Looking glass frame) of size25mm x 35mm x380mm

(e) Back plywood 6mm thick for back side of glass. of size 380mm x760 mm x6mm ( Make- GreenPly)

Bed Hard Plywood Top :- Supply and fix in repair the following new parts/components of Seasoned Teak wood (1st class hard wood) for Bed Hard Plywood Top as per drawing complete all as specified and directed by Enginee incharge.( Note- Work Should be done at site given by engineer incharge) Drg no- FD-246 and 247 (a) Plywood Commercial of size 6' x 3' x 12mm ( Make- Green Ply)

(b) Head board

(c ) Foot board

(d) Long rail 0f size 90mm x35mm x 1880mm

(e) Fixing only short rail from retrived long rail complete all as shown on drg ,

(f) Stiffener for Bed of size 40mm x60mm x900mm

SOFA SET 5 SEATER :- Supply and fix in repair the following new parts/components of Seasoned Teak wood (1st class hard wood) for SOFA SET 5 SEATER as per drawing complete all as specified and directed by Enginee incharge.( Note- Work Should be done at site given by engineer incharge) Drg no- FD-281, 234, 373 (b) Arm

(c) Front leg

(d) Rear leg

(e)Back Rail

(f) Front Long Rail

(g) Rear long rail

Table Centre :- Supply and fix in repair the following new parts/components of Seasoned Teak wood (1st class hard wood) for Table centre as per drawing complete all as specified and directed by Enginee incharge.( Note- Work Should be done at site given by engineer incharge) Drg no- (a) Leg

(b) Top rail Long

(c) Top rail Short

(d) Stiffner Rail

(e) Table Centre Top 18mm thick particle board (ISI Mark)

Table Bed Side :- Supply and fix in repair the following new parts/components of Table bed side as per drawing complete all as specified and directed by Enginee incharge.( Note- Work Should be done at site given by engineer incharge) Drg no-FD/E6/MAP/02(R), FD/E6/MAP/15(R) & FD-276. (a) Back Plywood 6mm thick ( ISI Mark) Make- Green Ply

(b) Side Pannel of Pre laminated Particle board 18 mm thick ( ISI Mark)

(c) Shelf of prelaminated particle board 18mm thick (ISI Mark)

Side Board :- Supply and fix in repair the following new parts/components of for Side board as per drawingcomplete all as specified and directed by Enginee incharge.( Note- Work Should be done at site given by engineer incharge) Drg no- 1112 (a) Back Plywood 6mm thick ( ISI Mark) Make -Green Ply

(b) Side Pannel of pre laminated particle board 18mm thick (ISI Mark)

(c) Shelf of pre laminated particle board 18mm thick (ISI Mark)

(d) Knob for Drawer (ISI Mark )

Teapoy Varandha :- Removing the old UNSV Top of teapoy Vearandha and S & F the new Top of 18mm thick Pre laminated particle board top of same size of ISI Mark. complete all as specified and directed by Enginee incharge.( Note- Work Should be done at site given by engineer incharge) Drg no-FD/E6/MAP/17

CANNING PORTION :- Material and labour in repair for recanning with new standard cane 2mm wide white ( Make -Maharastra) plastic cane half round type with and including border of 4mm wide half round plastic cane ( Make- Maharastra Cane ) of the same colour and quality as shown on drawing complete all as specified and directed by Enginee incharge.( Note- Work Should be done at site given by engineer incharge) (a) Chair Easy . Drg no- FD-229

(b) Chair Writing . Drg no- FD-280

(c ) Chair Dinning . Drg no- FD-279

Chair Verandah :- Material and labour in repair for recanning with new standard cane 4mm wide white plastic cane half round type Make;-Maharastra. as shown on drg complete all as specified and directed by Enginee incharge.( Note- Work Should be done at site given by engineer incharge) Drg no- FD-359

SCH 'A' PART-II ( BRANDED FURNITURE) Chair Steel Tubular Cushion seat and back Make ; Godrej Model-CH 7B or equivalent in Wipro/Featherlite. Drg no- TP

Chair Computer Revolving Make;Godrej, Model- bravo Mid back or equivalent in Wipro/Featherlite.Drg no- TP

Chair Revolving Mid back Make : Godrej, MODEL- Leoma Mid back or equivalent in Wipro/Featherlite Drg no- TP

Chair Revolving H/B Executive Make : Godrej, MODEL- Leoma high back or equivalent in Wipro/Featherlite. Drg no- TP

Table office officer Executive with mobile side unit and pedestal Make : Godrej, MODEL- Impress or equivalent in Methodex/Wipro/Featherlite. Drg no- TP

Book Case steel with Glass door (04 Nos) and locking arragement Make : Godrej Model- Glass door Storewell or equivalen in Methodex. Drg no-TP

REPAIRING OF STEEL FURNITURE ( Shedule 'A' Part-III ) Almirah Large Steel /Almirah Medium Steel :- Supply and fix in repair the following new parts, and make smooth and fine , body of Almirah steel Large and medium as per drawing complete all as specified and directed by Engineer incharge. (Note- Work Should be done at site given by engineer incharge). Drg no- FD-67 (M), FD-1031, FD-114 (M), FD-104 (M),FD-350,Fd- 1032,,104(M),243 (a) Leg made out of 18 Gauge thick mild steel sheet.

(b) Shelves made out of 18 Gauge thick mild steel sheet.

(c) Almirah Lock (Make : Godrej ISI Marked)

(d) chromium plated handle Make : Godrej

(e) Almirah Locking device with rod

Table Office Clerk Steel :- Supply and fix in repair the following new part, ofTable Office Clerk Steel as per drawing complete all as specified and directed by Engineer incharg. ( Note -Work Should be done at site given by Engineer in charge) Drg no- FD-84 (M)/1004/FD-84(M)/1003 (a) Drawer made out of 20 Gauge thick mild steel sheet.

(b) Lock 4 lever of brass of drawer with and including duplicate key. Make : Godrej

( c) Table Top 18mm thick Particle board laminated (ISI Mark) and edges covered with and including 1st class hard wood( teak wood) beading

(d) Door of unit made out of 20 Gauge thick mild steel Sheet.

Table Office Officer Steel :- Supply and fix in repair the following new part,of Table Office Officer Steel as per drawing complete all as specified and directed by Engineer incharg. ( Note -Work Should be done at site given by Engineer in charge) Drg no- (a) Drawer made out of 20 Gauge thick mild steel sheet.

(b) Lock 4 lever of brass of drawer with and including duplicate key. Make : Godrej

( c) Table Top 18mm thick Particle board laminated (ISI Marked) and edges covered with and including 1st class hard wood( teak wood) beading

(d) Door of unit made out of 20 Gauge thick mild steel Sheet.

CHAIR CBA STEEL :- Supply and fix in repair the canning of following parts of chair CBA steel of teak wood frame with and including godrej pattern weaved cane of 2mm thick ( make- Maharastra cane ) White.( Note -Work Should be done at site given by Engineer in charge) (a) Seat of chair

(b) Back of chair

Chair revolving Executive high back :- Supply and fix in repair hot pressed plywood in shape 12 mm thick for Seat and Back, polyurethane Foam 50 density for back and 75 density for seat duly covered with and including approved quality Fabric with and including PVC lipping all around.Tapestry cloth should be of high quality Make : 'D' Decor, (as approved by Garrison engineer) of Chair revolving Executive high back and the following new part,of Chair revolving Executive high back as per drawing complete all as specified and directed by Engineer incharge Note: Seat and Back shall be fixed as per Trade Pattern. (High Back). and Work Should be done at site given Drg no- TP

(a) Base leg of steel with caster wheels ( Make -Commander )

(b) Lifting Handle

(c)Arm rest

Chair revolving Executive low back :- Supply and fix in repair hot pressed plywood in shape 12 mm thick for Seat and Back, polyurethane Foam 50 density for back and 75 density for seat duly covered with and including approved quality Fabric with and including PVC lipping all around.Tapestry cloth should be of high quality Make : 'D' Decor (as approved by Garrison engineer) of Chair Revolving Executive low back and the following new part,of Chair Revolving Executive low back as per drawing complete all as specified and directed by Engineer incharg Note: Seat and Back shall be fixed as per Trade Pattern. (Low Back). and Work Should be done at site given by Engineer in charge) Drg no-

(a) Base leg of steel with caster wheels ( Make -Commander )

(b) Lifting Handle

(c) Arm rest

CHAIR VIGITOR:- Supply and fix in repair hot pressed plywood in shape 12mm thick of seat and back polyurethane foam 50 density. for back and 75 density for seat duly covered with and including approved quality fabric with and including PVC lipping alround. Tapestry cloth should be of high quality Make : 'D' Decor (as approved by Garrison engineer) of chair Revolving and the following new part of chair Revolving as per drawing complete all as specified.and directed by engieer incharge ( Note -Work Should be done at site given by Engineer in charge) Drg no- TP

(d) Arm rest match with existing

Chair Computer :- Supply and fix in repair hot pressed plywood in shape 12 mm thick for Seat and Back, polyurethane Foam 50 density for back and 75 density for seat duly covered with and including approved quality Fabric with and including PVC lipping all around.Tapestry cloth should be of high qualityMake ; 'D' Decor (as approved by Garrison engineer) of Chair Revolving and the following new part, of Chair Computer as per drawing complete all as specified and directed by Engineer incharge. Note: Seat and Back shall be fixed as per Trade Pattern. (Low Back). and Work Should be done at site given by Engineer incharge) Drg no- TP

(a) Base leg steel with caster wheels ( Make-Commander )

(b) Lifting Handle

(d) Arm rest match with existing

PAINTING TO STEEL FURNITURE :- Material and labour for Removing paint of steel furniture by rubbing with sand paper of proper size and description and make the surface smooth and clean internal and external as shown on drawing Including removing of dent if any and applying Spray Painting two coat of synthetic enamel paint (OG/Smoke Gray/White) Make - Nerolac/Asian paint. As per the existing requirement. Over a coat of red oxide primer complete all as specified and directed by Engineer incharge. ( Note -Work Should be done at site given by Engineer in charge) (a) Almirah large steel with shelves Drg no- FD-103, 1031,351

(b) Almirah medium steel with shelves Drg no- FD-1034, 243, 1032

(c) Table office clerk steel with drawer Drg no- FD-84 (M), FD-1004

(d) Table office officer steel with drawer Drg no- FD-84 (M), FD-1003

(e) Book case large steel Drg no-FD-120 (M)

(f) Chair CBA steel with Arms Drg no-FD-75 (M)

(g) Locker Bed side steel Drg no-FD-127 (M)

(h) Rack side steel 3/4 space Drg no- FD-97 (M), FD-106 FD-1023

(j) Chair varandah Drg no- FD-259, FD/MAP-II.06

(k) Teapoy varandah Drg no-FD-255

(l) Table executive with drawer and ERU Drg no- TP

(m) Rack steel open large Drg no-TP

(n)Chair Revolving ( Frame Only ) Drg no-

SOFA SET 5 SEATER :- supply and fix in repair cushion foam 40 density ( Make :- Kurlon/Sleep well) with high quality tapestry cloth Make 'D' Decor made with and including cover on Gada cloth duly zipped with and including PVC Zip (Openable type) of SOFA SET 5 SEATER complete all as specified and directed by engineer incharge( Note -Work Should be done at site given by Engineer in charge)

CHAIRPOY G I PIPE WITH PLYWOOD TOP :- Supply and fix in repair the new plywood of size 1980mm x 900mm x 12mm thick BWR grade finol bounded ISI Mark ( Make -Green Ply) Plywood shall be fitted on chairpoy with round headed steel nut,bolt and washer 12 for each chairpoy through suitable drill machine holes of appropriate size of CHAIRPOY G I PIPE WITH PLYWOOD TOP and the following new part/Components of chairpoy G I Pipe with plywood top including retighting the frame as per drawing complete All as specified and directed by Engineer incharge. ( Note -Work Should be done at site given by Engineer in charge) Drg no- Fd -220

(a) flat Iron. of size 860 mm x 25 mm x 3mm thick duly welded at both side in equal distance of chairpoy G I Pipe as per drawing.

( b)Elbow 3 way G I 32mm dia ( ISI marked)

Mahesh Traders

KASTURILAL HARICHAND OHRI AND SONS