PROVN OF 02 TOILET, 02 BATHROOM WITH SPECIFIC TANK NEAR BLDG NO A 53 STORAGE TANK OF 2000LTRS TO BN MAG OF 3 BIHAR, 02 TOILET, 02 BATHROOM NEAR BLDG NO A 30 OF 417 FD HOSP, MS GATE NEAR BLDG NO T 755 OF 3 BIHAR AT RHENOCK UNDER GE 867 EWS

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft / loose soil.

Excavation in trenches n exc 1.50m wide and not exc 1.50m deep for foundation and getting out in soft / loose soil complete all as specified and directed.

Excavation over area not exceeding 1.5m deep and getting out in soft/loose soil complete all as specified and as directed.

Excavation over area exceeding 1.5m deep not exc 3.0 and getting out in soft/loose soil complete all as specified and as directed.

Excavation in trenches n exc 1.50m wide and not exc 1.50m deep for foundation and getting out in soft / loose soil complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft / loose soil

M&L Returning filling in, including spreading, levelling, watering and well ramming in layers not exc. 25cm in soft / loose sioil.felling under floor complete all as specified and as directed.

Removing excavated material not exc 50m and depositing where directed at a level not exc 1.50m above the starting point complete all as specified and as directed.

M&L PCC type D-2 (1:4:8) (using 40mm graded stone agg) in foundation filling and mass concrete.

M&L PCC type C-2 (1:3:6) (using 40mm graded stone agg) in foundation filling and mass concrete.

M & L precast cement concrete type C-1 , (1:3:6) (using 20mm graded stone aggt) block masonry with solid blocks 10cm in and setting in cement mortar (1:6) complete all as specified and as directed.

M & L for modular fly ash bricks as in brick work straight or curved on plan exceeding 6m mean radious built in cement mortar (1:6) complete all as specified and as directed.

Formwork to soffits of suspendes slab such as slabs, floor slabs, landings and smillar work; not exceeding 200 mm thick (horizontal and sloping) for rough finished surfaces complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers, lintels, cantilevers, shelves including supports, overhangs,etc. also splays between floors and beams, etc.for rough finished surface of flat concrete complete all as specified and as directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

M&L for reinforced cement concrete (Nominal mix ) type B1, (1:2:4) (20 mm graded crushed stone ggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for reinforced cement concrete (Nominal mix ) type B1, (1:2:4) (20 mm graded crushed stone ggregate) as in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for reinforced cement concrete (Nominal mix ) type B1, (1:2:4) (20 mm graded crushed stone ggregate) as in walls, retaining walls, basement walls, ballast walls and the like any thickness; above top of footings including attached pilaster and buttresses complete all as specified and directed.

M & L Reinforced cement concrete (Nominal mix ) type B1, (1:2:4) (20 mm graded crushed stone ggregate) as in Beams, cantilevers, bressummers,lintels over 1.5m span complete all as specified and directed.

M & L Reinforced cement concrete (Nominal mix ) type B1, (1:2:4) (20 mm graded crushed stone aggregate) as in slabs supported on walls, roof beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L for precast cement concrete type-B-1, (1:2:4) (20 mm graded aggregate) as in cover slabs, set in cement morter (1:6) complete all as specified and as directed.

M&L mild steel TMT bars 10mm dia and over cut to length bend to shape required incld cranking bending spirally for hooping for column, hooking ends and binding with and incld mild steel wire (annealed not less than 0.90mm dia or securing with clips complete all as specified and as directed.

Ditto as per sl item No.23 above but 5mm dia and over upto and incld 10mm dia in stirrups, spacer and binders complete all as specified and as directed.

M&L for 15mm thick rendering on fair faces of brick work or concerte surface in cement mortar (1:3), finished even and smooth without using extra cement complete all as specified and directed.

M & L 15mm thick rendering on fair faces of brick work or concrete surface in cement mortar (1:6) complete all as specified and as directed.

M&L 20mm thick rendering in two layers of 10mm each on brick or block concrete masonry walls in cement mortar (1:4) with WPC incl finished even and smooth w/o using extra cement complete all as specified and as directed.

M & L preparing newly plastered or unplastered surfaces of wall and applying three coat of white wash complete all as specified and as directed.

S & F rolled section as in main and cross beams hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angles cleats or other connecting plates in FE-410W (Gde E-250) quality A complete all as specified and as directed.

S & F Mild steel work in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

M&L Preparation and applying two coat of synthetic enamel paint over one coat of red oxide primer on new steel surfaces, of any description, over 10cm width or girth not other wise described complete all as specified and as directed.

M&L Preparation and applying two coat of black japan paint on new steel surfaces, of any description, over 10cm width or girth not other wise described complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long, 11 to 15 mm dia of neck complete all as specified and directed.

Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

S & F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

M&L for mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips confirming to Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde - E-165) complete all as specified and directed.

Rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete confirming to Fe-290 (Gde E?165) complete all as specified and directed.

Mild steel sliding door bolts 300mm length, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F Pre- painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering, fixed with seif tapping screws complete all as specified and as directed.

S&F pre-painted galvalume aluminum zinc coating GI plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as in ridge complete all as specified and as directed.

M & L hardcore of gauge exc 63mm but n exc 100mm,deposited, spred and levelled in layers n exc 15 cm thick watered and rolled /rammed to a true surface complete all as specified and as directed.

M & L for 75 mm thick cement concrete type D-1, (1:4:8) (40 mm graded aggregate) as in sub base or sub flooring fininshing the surface even and rough to receive the topping layer complete all as specified and directed.

Non Skid ceramic colour tilles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar (1:6) complete all as specified and as directed.

M & L glazed ceramic coloured tiles (200 x 200mm) x 7mm thick on vertical surfaces such as skirting , dados & risers to steps set & Jointed in neat cement slurry & pointed in colored cement to match the surface over screed bed or bedding layer of mortar 10 mm thick for fixing wall tiles in cement mortar (1:4) complete all as specified and as directed.

M & L Glazed ceramic tiles in vertical surface 350x 250x 7mm / 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over screed bed or bedding layer of mortar 10 mm thick in cement mortar (1:4) complete all as specified and as directed.

M&L machine pressed chequered cement concrete tiles size 30cm x 30cm x 25mm thick and above, set,jointed and pointed in neat slurry with grey cement and pigments in floors cut and polished. over and incl 15mm thick screed bed or bedding layer of motar for laying floor finishes in cement plaster (1:6) all as specified and as directed.

S&F GI frame work of size 605 x 605mm, for seamless celing comprising of GI perimeter chanel 0.55mm thick with two unequal flangesof 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and incl ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete all as specified and as directed.

S&F 10mm thick PVC insulation panels with EPS stuck to 1mm printed PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S.complete all as specified and as directed.

Solid PVC door frame of size 50mm x 47 mm, made out of 5mm plain colour PVC sheet, reinforced with MS square tube supplying and fixing in openings as per specification & drawing complete all as specified and as directed.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side and as gap insert for top rail and bottom rail , panelling of plain colour PVC sheet to be fitted in the MS framewelded/ sealed to the stiles and rails with suitable PVC sheet beading , and jointed together with solvent cement in the frame at site as per specification complete all as specified and as directed.

S & F 200mm long aluminium anodised barrel tower bolts of extruded sections complete all as specified and directed.

S & F 150mm long aluminium handle cost type anodised complete all as specified and directed.

S&F 75 mm size butt hinges, medium weight , cold rolled, mild steel and fixed complete all as specified and directed

S & F steel ventilator with top hung shutter, including hinges, steel peg stay, complete all as specified and directed..

S & F 3.0 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

S & F 110 mm bore PVC Pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed.

S & F 110 mm bore PVC bends any radius complete all as specified and directed.

S&F 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed

S & F 75 mm bore PVC bends with including for all necessary extra joints cuttings and waste to any radius complete all as specified and directed.

S & F 75 mm bore PVC junction double, (double T), equal or unequal complete all as specified and directed.

S&F 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S & F 15mm bore of tube medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors complete all as specified and directed.

S & F 15mm bore of tube medium grade galvanized with all fittings & fixed completet laid in trenches complete all as specified and directed.

S & F bib taps cast copper alloy chromium plated with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule & fixed 15mm bore complete all as specified and as directed.

S & F 15mm dia fancy type pillar tap, cast copper alloy, capstan heads, chromium plated,screwed down high pressure, long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and as directed.

S & F Stop cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions complete all as specified and as directed.

S & F shelf of PTMT fixed with and including chrominium plated brass screws and wooden/plastic cleats (Min wt 300 gms) complete all as specified and as directed.

S & F towel rail 600 mm long of PTMT fixed with and including chrominium plated brass screws and wooden/plastic cleats (Min wt 190 gms) complete all as specified and as directed.

S & F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F in vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in positioncomplete all as specified and as directed.

S & F toilet paper holder with flat recessed type stainless steel fixed to wall complete all as specified and directed.

S & F PVC valve less, syphonic action type flushing cistern 10 ltr capacity low level, with inlet, ball valve float, flush pipe and handle including brackets complete all as specified and as directed.

S&F Vitreous china WHB 550x400 mm white flat back including pedestal and bracked complete all as specified.

S&F vitreous china urinals, haif stall type white with grating and union for discharge pipe including fixing plugs beddeing urinal againest wall in cement morter 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and as directed.

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60 gms) complete all as specified and directed.

M & L PCC (1:4:8), type D-2 conrete bed to drain pipes incl packing under and haunching against the sides of pipes after they are laid and tested in 110mm dia complete all as specified and directed.

M&L for PCC (1:3:6) type C1 using 20mm graded stone aggregate as in coping, bed blocks, benching, haunching etc including weathering, slightly rounded or charmfered and icluding required form work, complete all as specified and directed.

M&L 75 mm thick PCC type C-2, (1:3:6) (40 mm greded stone aggt) for plinth protiction, path/ steps etc to be finished fair and even complete all as specified and as directed.

M&L for PCC type C-2, (1:3:6) (using 40 mm graded crushed stone aggregate) as in surface channels and drains complete all as specified and directed.

M&L for 75 mm thick cement concrete type C-2, (1:3:6) (40 mm graded aggregate) as in sub base or sub flooring fininshing the surface even and rough to receive the topping layer complete all as specified and directed.

M&L for 40 mm thick cement concrete type B-1, (1:2:4) (using 20 mm graded crushed stone aggregate) as in floors finished even and smooth using extra cement complete all as specified and directed.

M/L for Point wiring complete with 1.5 sqmm single core PVC insulated and PVC unsheathed FRLS multistranded copper conductor cable 1100 volt grade enclosed in and including PVC casing and capping with accessories fixed on surface on walls/ceiling by means of PVC sleeves, Dash fastners and cadmium plated screws including sunken junction box not less than 3.0 mm thick concealed in wall, mounting accessories like switches, sockets fan regulators with 3.0 mm thick Laminated sheet top covers etc including 1.5 Sqmm single core multi stranded copper conductor PVC insulated and unsheathed cable as earth continuity conductor to common earth dolly complete all as specified and directed.

All as per item No.86 here – in – before but for one 3 / 5 -pin switch socket outlet 5 amps on independent board.

All as per item No.86 here – in – before but for one switch socket outlet 15 Amps on independent board with 2.5 Sqmm multi stranded and 2.5 Sq mm stranded (for earth) PVC insulated un-sheathed copper cable.

Supply and fix switch piano flush button, single pole, 5 amps, one way all as specified and as directed.

Supply & Fixing ceiling rose surface bakelite 65 X 50 mm three terminal all as specified and as directed.

Supply and fix switch socket combination 2 – in – one, 3 Pin / 5 Pin, 5 amps flush type all as specified and as directed.

S&F of electric storage type water heater of 25Ltr capacity, 2000Watt, vertical type including necessary angle cock, inlet and outlet water connecting pipe and electric connection complete all as specified and as directed by Engineer-incharge.

Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. Make : Crompton Cat part No "LDL-10-CDL" or equivalent in Philips/Havells.

S & F 9W LED Bulb suitable for B22 holder . System Efficacy should be > 85 lm/ W. PF > 0.9, The Lamp Should have Cool Daylight Color temp of 6500K, lumen output >800 lm. Make: Philips/Wipro/Crompton

S & F lamp holder,PVC/Polycarbonate type and back plate suitable for batten fitting.

S&F Sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 200 Amps rated Single pole and neutral linkof 8 way 240 Volts AC. Make- Legrand or equivalent in Siemens/Schindler.

Supply and fixing MCB Single pole and neutral 40 Amps capacity 10 KA 240 Volts 50 HZ, 'C' curve. Cat part No 4086 18 of Make : Legrand or equivalent in Siemens/Schneider.

Supply and fix MCB single pole (SP), 10 kA of 5 -32 Amps capacity 240 Volts, 'C' curve. Cat part no 4085 95 of Make : Legrand or equivalent in Siemens/Schneider

S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amps, 240V all as specified and directed.

M&L for Sub main wiring with FRLS two single core PVC insulated and unsheathed fire retardant multi stranded copper conductor cable 1100 volt grade IS-694, marked of 4.0 Sqmm size drawn through and including not less than 25/16 mm PVC cashing & capping medium grade ISI marked and conduit junction boxes, terminal boxes and incl all accessories fixed to the surface of wall/ceiling including one run of 4.0 sqmm PVC insulated and unsheathed FRLS multi stranded copper conductor cable for earth wire continuity conductor.NOTE : Two runs of single core 4.0 sqmm and one run of 4.0 sqmm copper FRLS cable as earth continuity conductor and suitable size cashing & capping with accessories shall be measured as one length.

M&L for Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground ( earth pit not less than 2.25 m deep bellow ground level ) with top edge of the plate not less than 1.5 m bellow normal ground level, connected to galvanized earth lead wire 4 mm dia. by means of galvanized iron or steel bolts , nuts , check nuts and washers, and connected to equipments as directed , including funnel with GI med grade watering pipe 20 mm bore , wire mesh , charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode , with concrete pit in PCC 1 : 3 : 6 type C-1 , 50 mm thick pre cast RCC 1 : 2 : 4 type B-1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar ,GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc. 50 m and necessary testing complete all as shown on electrical plate No. 3 of MES SSR Part-I and as directed.

S&F of Exhaust fan 200 mm sweep 1300 RPM with minimum airflow/air delivery 450 Cmh, light weight, rust proof body & blades, self opening louvers for protection from birds & rain water, IP-55, 200-240 Volt AC supply, rated power input not more that 30watt, connecting up including provison of cable from ceiling rose to fan. Make : Crompton Greaves, Model : BRISK AIR , or equivalent in USHA/Bajaj.

M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 6 sq. mm 3 core all as specified and directed by Engr-in-Charge.

S&F 25mm dia gun metal, globe or gate valves of following bore dia., with iron wheel head, screwed both ends for iron pipes and fixed including taking down old unserviceable one.

S&F Rotational moulded polythene water storage tank of 1000Ltr capacity ( cylindrical vertical with closed tops ) hoisted and fixed in position of 1000 Ltrs capacity, all as specified and as directed.

S&F steel water tubing of 25mm bore size, Tubes, 'medium grade', galvanised, with all fitting; laid in trenches complete all as specified and directed.

S&F PVC float valve, high pressure with polythene float and fly nut complete screwed for PVC pipe and fixed in 25mm bore pipe complete all as specified and as directed by Engineer-incharge.

M& L for framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified.

M & L for cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate ) as in foundation , filling and mass concrete complete all as specified and directed.

M&L for cutting existing steel tubing of Upto 25/40mm dia for alterations or additions (Each cut measured) and inserting new Tee, bend, elbow etc for following size GI tubing all as specified and directed by Engr-in-Charge.

M&L for cutting, screwing the same for alterations or additions in position including refixing old steel tubing and connections in new or old position by means of equal 'T' of Reduced 'T' junction of dia upto 50mm complete.

M&L for construction of Valve chamber of internal dimension/size 600 x 600 x 600 mm, with 200mm thick pre-cast PCC solid block masonry (made of PCC 1:3:6 type C-1 : using 20mm graded crushed stone aggregate) wall in cement mortar 1:6, with 1.6 mm thick MS sheet cover, fixed with 25x25x6 mm stiffner welded around, welded over angle iron frame of size 65 x 65 x 6 mm with locking arrangements including applying two coats of first grade synthetic enamel paint (of approved tint) over a coat of red oxide primer on steel surfaces, necessary earth work in soft/loose soil with and including 100 mm thick PCC (1:3:6) Type C-2 (using 40mm graded stone aggregete) as in foundation, 50 mm thick PCC (1:2:4),Type B-1 (using 20mm graded stone agregate) as in coping on top including rendering 10mm thick in cement mortar 1:6, finished even and fair and applying three coats of white wash on exposed surfaces, complete including demolition of existing unserviceable valve chamer complete all as specified and directed by the Engineer-in-Charge. (The chamber shall be 150 mm above the ground level).

Note: In case doubling/duplicancy of BOQ items , the lowest quoted rate shall be applicable for payment.

SANJAY SAW MILL (BID ID -3112515)

DEEP CHANDRA JOSHI (BID ID -3115609)

MS MAYA PRAKASH GOEL AND SONS (BID ID -3115554)

HEM RAJ GURUNG (BID ID -3115440)

SANJAY MITTAL (BID ID -3115467)

MANOJ JINDAL (BID ID -3115577)

RAMESH GURUNG (BID ID -3115446)