Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.2 LAccepted-AOC | L1 | Accepted-AOC 1swt lowest | |
| 2 | L2₹5.6 L+₹33,932 (6.51%)Rejected-Finance | L2 | Rejected-Finance 2nd lowest | |
| 3 | L3₹5.7 L+₹53,778 (10.3%)Rejected-Finance NO 14 SMALL STREET MANAPET PO BAHOUR COMMUNE PUDUCHERRY 607 402 | CUDDALORE | TAMIL NADU | 607402 | L3 | Rejected-Finance 3rd lowest |
Tender Value
₹4.8 L
Closing Date
9 Aug 2021, 4:00 pmClosed
Executive Engineer
Office of the Executive Engineer, BRS, PWD, Puducherry
Renovation of second and third floor of Directorate building including repairs to the toilet in the main building of the Department of Animal Husbandry and Animal Welfare, Puducherry II Call
2021_PWDC1_8336_1
No.7/PW/EE/BRS/2021-22
Open Tender
Civil Works - Buildings
Item Rate
90 days
Puducherrry
Please refer Tender documents.
3 documents required · 3 mandatory
₹525
Exempted
28 Apr 2022
30 Jul 2021
10 Aug 2021
30 Jul 2021
9 Aug 2021
30 Jul 2021
Amount
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
Applying one coat of water thinnable cement primer of approved brand and manufacturer on wall surface - water thinnable cement primer
Wall painting with plastic emulsion paint - Premium of approved brand and manufacture to give an even shade - One or more coats on old work
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50m lead - For thickness of tiles 10mm to 25mm.
Demolishing lime concrete manually / by mechanical means and disposal of material within 50 metres lead.
15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:4 (1 cement : 4 fine sand)
Providing a layer of trowel applied cementitious water proofing membrane of 5mm thick nominal SETSEAL TANKING - A pre packed water proofing single part system over the SETSEAL APPLIED primer surface after wetting the surface including all complete.
Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
Providing, laying and jointing UPVC pipes(Finolex / jain / Supreme / Truebore / Nandi) (0.6 Mpa)conforming to IS specification 4985 and ISI marked including transportation to the site , lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment,including cost of solvent cement,excluding UPVC specials such as bends, tees, threaded pieces, couplers, reducer, endcaps etc.,complete all as per IS and CPWD specification. - 110mm dia.
Providing and fixing in position UPVC moulded equal Tee (Finolex/Jain)(1 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete - 110mm dia
Providing and fixing in position UPVC moulded elbow (Finolex/Jain)(1 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete - 110mm dia
Providing and fixing in position UPVC moulded reducer coupler (Finolex/Jain)(0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete - 110 x 75mm dia
Providing and fixing PVC trap with PVC grating with or without vent arm complete including providing necessary lubricant and slip ring for fixing fitting, cost of cutting and making good the walls and floors - 110mm inlet and 110mm outlet as directed by the Engineer-in-charge.
Providing and fixing on wall face unplasticised- PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion. Shoe (plain)110mm shoe.
Providing and fixing water closet squatting pan (Indian type W.C.pan) with 100mm sand cast iron P or S trap, 10 litre low level white P.V.C . Flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : white vitreous china orissa pattern W.C .pan of size 580X 440mm with integral type foot rests.
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever, conforming to IS: 7231, with all fittings and fixtures complete) including cutting and making good the walls and floors wherever required.W.C pan with ISI marked white solid plastic seat and lid.
Providing and fixing wash basin with CI brackets, 15mm CP brass pillar taps 32 mm CP brass waste of standard pattern including painting of fittings and brackets, cutting and making good the walls wherever required White vitreous china wash basin size 630x450mm with a single 15mm CP brass pillar taps.
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level 1:5:10 (1 cement : 5 sand : 10 graded brick aggregate 40mm nominal size).
Providing, laying and jointing UPVC pipes(Finolex/Jain) (1 Mpa)conforming to IS specification 4985 and ISI marked including transportation to the site , lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment,including cost of solvent cement,UPVC specials such as bends,tees, threaded pieces,couplers,reducer,endcaps etc.,complete all as per IS and CPWD specification. - 20mm dia.
Providing and fixing CP brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 - 15 mm nominal bore.
Providing and fixing CP brass health faucet of approved quality - 15mm nominal bore
Providing and fixing unplasticised P.V.C. connection pipe with PTMT nuts, collar, and bush of approved quality and colour - 15 mm nominal bore with 45cm length
12mm cement plaster of mix cement mortar 1:4 (1 cement : 4 coarse sand)
Providing and laying ceramic glazed floor tiles 300X300mm (thickness to be specified by the manufacture of commercial quality conforming to IS : 15622 of approved make (Bell / Johnson / Regency / Somany / Naveen / Asian ) in colours such as white, ivory, grey, fume red, brown laid on 20mm thick cement mortar 1:4(1 cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete
Fixing glazed/Ceramic/vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (water based) conforming to IS:15477, using 5kg adhesive per sqm of tile area.
Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete - Flexible pipe - 40mm dia.
Poilshing the existing mosaic floor with power polisher to a high degree of polish as to be perfectly smooth .
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade - One or more coats on old work.
T.MOORTHY
Krishna kumar
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .