PERIODICAL SERVICES TO JCOS/OR MD ACCN , OFFICERS MD ACCN, OFFICERS MESS, BOUNDARY WALL UNDER AGE B/R-I AT BIKANER MIL STN

Amount

M & L Preparation of old decorated plastered or un plastered surface of wall including cornices, pilasters etc by brooming down etc and applying one coat of white wash complete all as specified and as directed by Engr-in-Charge.

M & L Preparation of old decorated plastered or un plastered surface of ceiling by brooming down etc and applying one coat of white wash complete all as specified and as directed by Engr-in-Charge.

M & L Preparation of old decorated plastered or un plastered surface of wall by brooming down etc and applying one coat of colour wash complete all as specified and as directed by Engr-in-Charge.

M & L Preparation of old decorated plastered or un plastered surface of wall by brooming down etc and applying two coats of colour wash complete all as specified and as directed by Engr-in-Charge.

M & L Preparation of old decorated surface of wall including cornices, pilasters etc by brooming down, steel wire brushing, scraping down smoke soot, moulds, moss and efflorescentsalts and treating oil and greasy spots removing nails and filling small holes by putty and rubbing surface by sand paper to prepare the surface and applying one coat of distemper oil emulsion white or tinted complete all as specified and as directed by Engr-in-Charge.

M & L Complete removal of existing treatment of wall including cornices, pilasters etc by brooming down, steel wire brushing, scraping down smoke soot, moulds, moss and efflorescentsalts and treating oil and greasy spots removing nails and filling small holes by putty and rubbing surface by sand paper to prepare the surfaceand applying two coats of distemper oil emulsion white or tinted complete all as specified and as directed by Engineer-in-charge.

M&L Applying one coat of plastic emulsion paint on old decorated surfaces including preperation of surfaces complete all as specified and as directed by Engineer-in-charge.

M & L Preparation of old decorated surfaces of walls including cornices, pilasters etc and applying one coat of cement based paint white or tinted complete all as specified and as directed by Engr-in-Charge.

M & L Complete removal of existing treatment of wall including cornices, pilasters etc by brooming down, steel wire brushing, scraping down smoke soot, moulds, moss and efflorescentsalts and treating oil and greasy spots removing nails and filling small holes by putty and rubbing surface by sand paper to prepare the surfaceand applying two coat of cement based paint white or tinted complete all as specified and as directed by Engineer-in-charge.

M & L Preparation of old decorated surface of wall facia other lathes including cornices, pilasters etc and applying one coat of terracotta red paint or tinted complete all as specified and as directed by Engr-in-Charge.

M&L Painting to old wood or wood based surfaces of any description, not otherwise described over 10cm width or girth including preparation of surfaces and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

M&L Painting to old steel or steel based surfaces of any description, not otherwise described over 10cm width or girth including preparation of surfaces and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

M & L complete removal of old painted plastered or un plastered surface of wall of any description, including cornices, pillasters etc and applying two coats of weather proof paint of approved make & quality, complete all as specified and as directed by Engineer-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames of any thickness including punching or drilling out old glazing pins/springs clips all as directed by Engineer-in -charge.

S & F Sheet glass 03 mm thick, ordinary quality & glazing with oil putty in squares n.exc 0.5 sqm in each pane all as directed by Engineer-in -charge.

All as per sl item No.15 above but pin head glass complete all as specified and as directed by Engineer-in-charge.

Taking down cement or cement lime plaster/ terrazo finish of any description from brick or stone walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed by Engineer-in-Charge.

M&L Rendering 15 mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge( Note : The quoted rates shall be irespective of height & contractor shall not have any claim for same.)

M&L Rendering 15 mm thick in cement and sand mortar 1:4 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge ( Note : The quoted rates shall be irespective of height & contractor shall not have any claim for same.)

M&L 15 mm thick rough cast plaster in Cement mortar 1:4 consists of crushed stone or fine gravel aggregate (which is generally of size between 6 to 12 mm depending on the texture required) mixed with course sand and cement in the ratio of 1:1:1 complete all as specified and as directed by Engineer-in-Charge. (Note: The rate quoted shall be deemed to include for necessary use and waste of form work if required and nothing extra shall be paid on this account).

M&L Rendering 10 mm thick in cement and sand mortar 1:3 on cement concrete surfaces as on ceiling including /facia chajjas finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge

M & L Preparation of newly plastered or un plastered surface of wall including cornices, pilasters etc by brooming down etc and applying two coats of white wash on walls complete all as specified and as directed by Engr-in-Charge.

M&L Preparation of newly plastered surfaces/wall putty surface of wall including cornices, pillasters etc and applying two coats of Distemper oil emulsion of approved tint or color on putty surfaces complete all as specified and as directed by Engineer-in-Charge.

Preparation of newly plastered surfaces/wall putty surface of wall including cornices, pillasters etc and applying two coats of cement based paint of approved tint or color complete all as specified and as directed by Engineer-in-Charge

Preparation of newly plastered surfaces of ceiling and applying two coats of white wash complete all as specified and as directed by Engineer-in-Charge

M & L Preparation of old painted plastered or un plastered or concrete surface of wall of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

M&L Writing letter or Figuers (Blocks Romas, Italic or Indian Style) height of letter Not exc 30cm in height complete all as specified and as directed by Engineer-in-Charge

M&L Painting lines, dashes, arrows, letters, etc. or roads, pavements and the like exc 10cm wide with roads marking paint, white or golden yellow

M&L for preparation of surfaces of old or new surfaces incl removal of old treatment and applying a thin layer of plaster of paris to give a uniform finish all as specified and as directed by Engineer-in-Charge.

M&L Applying single thin layer of 2 to 3 mm thick wall care putty on walls over a coat of suitable primer as per manufacturer instruction , complete all as specified and as directed by Engineer-in-Charge.

Removing up rooting vegitation growth building roof top/sides of walls nexc. 30 cm girth including and stacking of serviceable material and disposal of unserviceable material to a distance n exc. 50 cm and clearing site and making good of the disturbed surfaces in brick work cm 1:4 and plaster in 1:4 ,surface area nexc 0.50 sqm.(Note: For removal of vegitation if reqd at site rain water pipes, bends shall be removed, preserved and refixed in the same location and contractor's quoted rate includes for the same.)

M/L for providing and injecting chemical emulsion for Post constructional antitermite treatment along external wall where the apron is not provided using chemical emulsion at the rater of 7.5 ltr per sqm of the vertical surface of the sub structure to a depth of 300 mm including excavated channel along the wall and rodding etc complete . (Note:- the treatment work shall be carried throught authorised agency only , and certificate for the same for warranty shall have to furnished before claiming payment)

M/L for providing and injecting treatment of soil under exixting floors chemical emulsion for Post constructional antitermite treatment using emulsion @ one liter per litter per hole ,300mm apart including drilling and plugging 12mm dia hles with cement motar 1:2 (1 cement 2 coarse sand ) to matchthe existing floors. (Note:- the treatment work shall be carried throught authorised agency only and certificate for the same for warranty shall have to furnished before claiming payment)

M/L for providing and injecting of Voids in masonary using chemical emulsion for Post constructional antitermite treatment one liter per hole, at 300mm intervals including drilling holes, and drilling holes at 45 degree and plugging the same with cement motor 1:2 to match with existing surface.(Note:- the treatment work shall be carried throught authorised agency only, and certificate for the same for warranty shall have to furnished before claiming payment)

M/L for providing at point of contact of wood work by chemical emulsion for Post constructional antitermite treatment ( in oil or kersene based solution) @ 0.5 liter/hole by drilling 6mm dia hole at a downward angle 45 degree at 150mm c/c and sealing the same. (Note:- the treatment work shall be carried throught authorised agency only, and certificate for the same for warranty shall have to furnished before claiming payment)

N.K. CONSTRUCTION COMPANY

durga construction company

m/s gaurav enterprises