8758/GWL/E8 CERTAIN REPAIR PLUMBING, SANITARY AND MISC CONNECTED ITEMS AT OTM ACCN / MD ACCN, MISC PETTY REPAIR WORK IN MH , MDC AND CERTAIN OTHER LOCATION IN THE AREA OF AGE B/R-I GE GWALIOR

Amount

Demolition of cement concrete as in floors and pavings n exc 15 cm thickness (below or above Ground Level) complete all as specified and directed by Engr -in- Charge.

Taking down cement or cement lime plaster incl wall tiles, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed by Engr -in- Charge

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles and rubbish off the premises complete all as specified and directed

M&L, 25 mm thick PCC 1:2:4 type B-O (using 12.5 mm graded BT stone aggregate) as in levelling course complete all as specified and directed

M&L, 15 mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed

M&L, non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) joint free area of each tile exc 0.06 sqm but n. exc 0.11 sqm, in floor etc, set and jointed in neat Cement slurry and pointed in coloured cement to match the shade of tiles complete all as specified and directed

M&L, non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) joint free , area of each tile exc 0.11 sqm but n. exc 0.18 sqm, in floor etc, set and jointed in neat Cement slurry and pointed in coloured cement to match the shade of tiles complete all as specified and directed

M&L, light shade Vitrified ceramic tiles 10mm thick (square/rectangular) polished area of each tilles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed

M&L, rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1: 4 surface finished even and rough complete all as specified and directed

M&L, Glazed ceramic (Digital/Printed Highliter) Coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles complete all as specified and directed

M&L, non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) joint free, area of each tile exc, 0.11 sqm but n. exc, 0.18 sqm, in skirting /dado etc, set and jointed in neat Cement slurry and pointed in coloured cement to match the shade of tiles complete all as specified and directed

M&L, Vitrified ceramic tiles light shade .10mm thick (spuare or rectangular) polished, area of each tilles n.exc 0.36 sqm, on vertical surface as in dado/ skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed

Dismantling of stone slab and tile of any description or thickness in floor, aprons etc laid dry, bedded and pointed in any mortar complete all as specified and directed.

M&L, Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L, PCC 1:4:8 type D2 using 40 mm graded sand stone aggregate as in sub base of floors, foundation and mass concrete complete all as specified and directed

M&L, 20 mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed

M&L, machine cut Kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry, mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed

M&L, machine cut Kota stone slab 15-20 mm thick over cement plastered base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing as in skirting complete all as specified and directed

M&L, 15 mm thick rendering on fair faces of brick work or concrete surfaces, in cement mortar (1: 6) and surface finished fair and even complete all as specified and directed.

M&L, rendering 5 mm thick in CM 1:3 on fair faces of brick work or concrete surfaces as in ceiling finished fair and even complete all as specified and directed

M&L,75 mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection with finished even and smooth without using extra cement complete all as specified and directed.

Dismantling of water tank exc 250 ltrs and n. exc 500 ltrs capacity and removing from site complete all as specified and directed.

Dismantling of water tank exc 500 ltrs and n. exc 1000 ltrs capacity and removing from site complete all as specified and directed.

S&F ,500 ltr capacity rotational moulded polythene water storage tank three layers with anti bactrial film ISI Marked (cylindrical vertical with closed top ) hoisted and fixed in position complete all as specified in SSR Part-I

S&F,1000 ltr capacity rotational moulded polythene water storage tank three layers with anti bactrial film ISI Marked (cylindrical vertical with closed top ) hoisted and fixed in position complete all as specified in SSR Part-I.

S&F in repair PVC water tank Cover Capacity of 500 ltrs and 1000 ltrs

S&F, in repair 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.(minimum weight 210 gm)

S&F, in repair 20 mm bore, gun metal globe / gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F, in repair 15 mm bore, gun metal globe / gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Taking up and down 20 mm bore steel tubing and connections including cleaning for refixing or removel from site complete all as specified and directed.

Taking up and down 15 mm bore steel tubing and connections including cleaning for refixing or removel from site complete all as specified and directed.

S&F, 15 mm bore ,tube, 'medium grade' galvanized with all fitting and fixed complete to walls and ceiling or laid in floor complete all as specified and directed.

S&F, 20 mm bore ,tube, 'medium grade' galvanized with all fitting and fixed complete to walls and ceiling or laid in floor complete all as specified and directed.

Refixing old steel tubing and connections in new or old positions on walls, ceiling, floor etc of 15 mm bore with new fittings complet all as specified and directed.

Refixing old steel tubing and connections in new or old positions on walls, ceiling, floor etc of 20 mm bore with new fittings complet all as specified and directed.

M&L, cutting chases, in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc, and cutting chases for concealed water tubings or conduit wiring, etc and macking good ,cutting n.exc 10 cm girth complete all as specified and directed

S&F in repair 15 mm bore bib tap standard fency type of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 90 gms dia). complete all as specified and directed.

S&F, in repair ,15mm bore stop valve cast copper alloy, screwed down high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

S&F, in repair Brass chromium plated shower rose 125mm size complete all as specified and directed.

S&F, in repair 15 mm bore stop valve cast copper alloy screwed down high pressure with capstan heads handle fancy type, chromium plated with long shank and cup concealed type screwed both ends for iron pipe or for unions and fixed.

S&F, in repair 15 mm bore angular stop cock with wall flange (wall mount Installation type) complete all as specified and directed

S&F, in repair 15 mm dia Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F, in repair 15 mm dia CP brass bib cock ,cast copper alloy with capstan headed handle, screwed down ,screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F, in repair sinks with drainage borard made of stainless steel 1mm thick kitchen or laboratory with plug washer and waste coupling including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connection to pipe over all size 915mm x460 mm bowl size 410mm x 330mm x 160mm complete all as specified and directed

S&F in repair 32 mm bore,Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed

S&F, in repair wash hand basin vitreous china white flat back of 550mm x 400mm size , including cutting for and pinning in ends of brackets complete all as specified and directed

S&F, in repair 15mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed complete all as specified and directed

S&F, in repair vitreous China Squatting pan including connection to trap and to flushing pipe, anti-syphonage pipe, etc., ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe), complete including making good to floor complete all as specified and directed by Engr in Charge

S&F,in repair Vitreous China, semi-pedestal pattern (Anglo-Indian Type) , white (excluding fixing bolts, flushing cistern and flush pipe complete all as specified and directed.

S&F in repair PVC seat cover for EWC

S&F, in repair PVC valveless, syphonic action type, flushing cistern 10 ltr capecity, low level,white, with inlet,ball valve, float and handle including brackets with Flush pipe of polyethylene of low or high density or PVC, 32 mm dia, for low level cistern complete all as specified and directed.

S&F in repairs PVC connections, 15mm dia for wash hand basin and low level flushing cistern of 450mm length brass chromium plated nuts at ends to connect pipe or sanitary fitting complete all as specified and directed.

M&L,cutting holes into or through brick walls built in cement mortar or cement lime mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required; superficial area not exceeding 150 Sqcm complete all as specified and directed.

S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed by Engr -in- Charge.

S&F, in repair Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed.

Hacking out old broken glass (any thickness size quality or description) from wooden frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads.

S&F, 3mm thick sheet glass ordinary quality and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and directed.

S&F, 3mm thick pin headed type, figured glass and glazing with oil putty in squares n exc 0.5sqm in each pane complete all as specified and directed.

S&F, in repair Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire complete all as specified and directed.

Demolition of brick work built in cement or cement lime mortar including all quions,arches,pillars etc.complete all as specified and directed.

M&L, brick work with sub class ‘B’ bricks, (old size) straight or curved on plan,exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

S&F 3mm thick glass dividing strips 38mm wide incerted in position confirm to design complete all as specified and directed

M&L, 40 mm thick PCC 1:2:4 type B1 Using 20mm graded BT stone aggregate as in floor,surface finished even and smooth with using extra cement complete all as specified and directed.

S&F, in repair 32 mm bore PVC waste pipe and 65 cm long flexible complete all as specified and directed.

Taking down eaves gutters and rain water pipes (any size 75mm to 110mm of any pattern) ,of any description and in any position, including all fittings , heads, shoes, bends, swan necks, etc., (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed by the Engineer in charge.

S&F, 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joint laid in floor or fixed to wall etc. complete all as specified and directed.

S&F, 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joint laid in floor or fixed to wall etc. complete all as specified and directed.

S&F, 75 mm bore, PVC (SWR) junction single (single T), equal or unequal, provided with access door complete all as specified and directed.

S&F, 110mm bore, PVC (SWR) junction single (single T), equal or unequal, provided with access door complete all as specified and directed.

S&F, 110 mm bore PVC (SWR) vent cowl, complete all as specified and directed.

S&F, 32 mm bore LDPE pipes of pressure rating 6 kg/sqcm fixed complete including all fitting to wall and ceiling or in floors complete all as specified and directed.

S&F,in repair 75 mm dia out let PVC (SWR) Floor trap plain with grating including jointing with solvent cement and fixed complete all as specified and directed.

S&F, in repair flushing jet spray for pedestal pattern WC including 1 m long flexible pipe and brass chromium plated nuts, complete all as specified and as directed.

Cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes etc. Capacity of tank exc. 250 ltr but n.exc 500 ltrs complete all as specified and directed

Cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes etc. Capacity of tank exc.500 ltr but n.exc 1000 ltrs complete all as specified and directed

S&F solid PVC doors frames of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube in opening as per specification and drawing as specified in clause 8B-1 to 8-B-10 on page 133 to 138 and page 146 to 153 of SSR -2004 part-II complete all as specified and directed

S&F factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC`C` channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles ad plain colour PVC sheet for top rail, lock rail & bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stile & rails suitable PVC sheet beading and jointed together with solvent cement and fixing in the frame complete all as specified and shown on drawings on page 133 to 153 of SSR -2004 part-II complete all as specified and directed

S&F PVC connection of 450 mm length in repairs

S&F PVC connection of 600 mm length in repairs

M&L for repair Aluminum door of any type & any size, taking down and re-fixing including all small accessories (like handle, gaskit, hinges, tower bolt, door stopper ect) Complete all as specified and directed by Engr -in- Charge Note : Glass & Particle board shall be paid separately.

M&L for repair Aluminum window of any type & any size, taking down & refixing including all small accessories (like handle, rubber/gaskit, hinges, tower bolt, door stopper ect) Complete all as specified and directed by Engr -in- Charge Note : Glass & Particle board shall be paid separately.

M & L for Anodised powder coated (min thickness 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified complete all as specified and directed.

S & F anodised powder coated aluminium door / window shutters, aluminium section weighing not less than 0.55 kg/m including necessary jointing cleats, Glazing clips , rubber neoprene packing, handles two numbers in each door, 100mm long brass hinges, 150mm long aluminium tower bolts, anodised aluminium snap beading screws etc including M&L for fixing floor machene and godrej lock in each door complete.

Taking down Chowkats or frames not exceeding 1.5 Sq.m each (Without taking off shutters from the frames) complete all as specified and directed.

Taking down Chowkats or frames exceeding 1.5 Sq.m but not exceeding 4 Sq. M each (Without taking off shutters from the frame) complete all as specified and directed.

Taking down shutters of any description exc 1 sq. m and n exc 2 sqm each complete all as specified and as directed.

S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S&F, Box type steel ventilator with top hung shutters (double shutters for glass and guaze) jointed together with an including grills using 10mm square bars @10 cm C/C as per TD No CEBZ/TD/14/2011 including box type hinges with steel handle and steel peg stay complete with glazing bars devetailed and welded complete all as specified and as directed. Note : Glass/guage shall be measured and paid separately under respective item.

S&F, Box type steel windows with side hung shutters (double shutters for glass and guaze) jointed together with an including grills using 10mm square bars @10 cm C/C as per TD No CEBZ/TD/14/2011 including box type hinges with steel handle and steel peg stay complete with glazing bars devetailed and welded complete all as specified and as directed. Note : Glass/guage shall be measured and paid separately under respective item.

S&F SS butt hinges 100mm long medium weight, cold rolled mild steel complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F, butt hinges 75 mm long medium weight, cold rolled mild steel complete all as specified and directed.

S&F aluminum handles cast type, anodized of 150 mm size complete all as specified and directed.

S&F 150 mm long aluminium anodised , barrel tower bolt of extruded section and fixed complete all as specified and directed.

S & F for door closer hydraulically regulated, designation No. 3, universal type, aluminium die-cast body (ISI Marked), suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed in repair complete all as specified and directed

M & L for 12mm thick prelaminated particle boards in shutter and shelves for cup boards including alround 5-6mm thick lipping (!st class hard wood lipping) complete all as specified and directed

S&F Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n exc 200 cu. cm each of first class hardwood complete all as specified and directed

S&F Butt hinges 50 mm long, heavy weight, cold rolled mild steel, and fixed completed all as specifed and directed.

S&F, in repair 15 mm bore, cast copper alloy chromium plated fancy type wall mixer tap with telephonic shower(3-in-1 system) for cold & hot water complete all as specified and as directed.

S&F, in repair 15 mm bore CP central hole basin mixer with regular spout fancy type, cast copper alloy with capstan head,long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

S&F Pillar Tap Swan Neck complete all as specified and directed by Engr in Charge

S&F in repair chromium plated shower rose 125 mm dia approvedcomplete all as specified and directed

S&F bib cock long nose with wall flange 15 mm caste copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe and fixed, approved complete all as specified and directed.

S&F bib taps fency type 15 mm caste copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe and fixed, approved complete all as specified and directed.

S&F concealed stop cock fency type 15 mm caste copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe and fixed complete all as specified and directed

S&F Pillar cock chromium plated fance type complete all as specified and directed

S&F Angle Cock with flange fency type 15 mm caste copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe and fixed complete all as specified and directed

S&F, in repair PVC bathroom mirror cabinet of size 400x500 mm all complet all as specified and directed.

M&L for applying two coats of exterior emulsion paint on new plaster surface of wall white or tinted on wall and including one coats of cement based white care putty to achive even and fair surfaces complete all as specified and as directed by the Engineer in charge.

S&F, in repair stainless steel plate rack for utensils of size 750x750 mm of approved pattern and design of minimum weight 7.5 kg each all as directed.

S&F Vitreous China urinal flat back fully stall type white ( excluding flushing cistern waste pipe, flush pipe) complete all as specified and directed

S& F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) complete all as specified and directed

M&L,applying two coats of white wash including preparation of newly plastered or unplastered surfaces of walls complete all as specified and directed.

M&L, applying two coats of white wash including preparation of newly plastered or unplastered surfaces of ceiling and complete all as specified and directed

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

M&L for Concrete bed to drain pipes for 150 mm internal dia including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) complete all as specified and directed.

M&L for Salt glazed stoneware drain pipes, Grade 'A' 150 mm dia laid in trenches and jointed as specified complete all as specified and directed.

M&L for Concrete bed to drain pipes for 200 mm internal dia including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) complete all as specified and directed.

M&L for Salt glazed stoneware drain pipes, Grade 'A' 200 mm dia laid in trenches and jointed as specified complete all as specified and directed.

M&L for Cement concrete type C-2 1:3:6 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M&L for brick work with sub class 'B' bricks (old size) straight or curved on plan, exc. 6m mean radius built in cement mortar 1:6 as in manholes, septic tanks, soakage pits, drain etc and in any position complete all as specified and directed.

M&L for 15 mm thick rendering on fair faces of brick work or concrete surfaces in cement plaster 1:4, finished even & smooth without using extra cement or lime and mixed with liquid water proofing compound as per manufacture instruction complete all as specified and as directed. Note:- Liquid water proofing compound to be measured and paid seperately

Supply only Liquid water proofing compound complete all as specified and as directed.

M&L for providing cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate ) as in copings, kerbs, benching and yhe like, including weathering slightly rounded of chamfered angles and throathing complete all as specified and as directed.

M&L for providing precast cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate ) as in landing, cover slab(for an holes etc.) chullah hoods, chajja, water thoughts, and similar articles with plain faces including set in cement mortar 1: 4 complete all as specified and as directed.

M&L for Mild TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Mild TMT steel bars 6mm to 8mm, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Returning, filling in ,including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in any type of soil complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed.

Add or deduct for each 25 mm girth or part thereof over or under 30cm ditto complete all as specified and directed.

MAHARAJ KUNWAR SAHAB CONSTRUCTION

BHAGIRATH CONSTRUCTION COMPANY

M/s Maa Vaishno Construction Co.

M.S. ENGINEERS

M/S YOGANSH CONSTRUCTION CO.

Akarsha Enterprises

M/s Yashika Enterprises

M/s Ratan Lal Jain and Co.

mahamaya constructions

M/s Manish Contractor

M/S Amit Traders

Babatia super works

M/s Shri Diwakar Singh