GE 874/EWS-73/2023-24

Amount

M&L for 15 mm thick rendering in cement mortar on fair faces of brick work or concrete surfaces, applied in two layers ie ist layer of 10 mm thick in CM (1:6) and 2nd ( top ) layer of 5 mm thick in CM (1:4 ) mixed with WPC finished even and smooth (without using extra lime or cement) incl. taking down existing cement plaster of any description & position, racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. Note: - WPC shall be measured and paid separately.

Excavating in posts holes (or similar holes) in any type of soil each n. exc 0.50 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc 25cm each layer complete all as specified and directed.

M&L for providing PCC (1:4:8) type D2 (using 40mm graded stone aggregate) in foundation filling and mass concrete complete all as specified and directed.

Demolition of brick / block walling and similar items ie. ashlar facing dressed stone work, precast concrete articles etc of any description and in any position, built in cement mortar, including all quoins, arches and pillars etc. complete all as specified and directed.

M&L for brick work with sub-class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete all as specified and directed.

S&F galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed.

S&F in Repair galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts including, securing and tying at crossings with and provisions of galvanised mild steel wire staples or steel pins etc complete all as specified and directed. Note for item No. 6&7:- Each line of wire shall be measured.

Dismantling chain link fencing & fencing wire mesh any type fixed in any situation & position including flat iron MS round bars mounted on nuts & bolts etc complete all as specified and directed.

S&F 4mm dia galvanised steel wire chain link fencing including line wires, 150x100mm mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling complete all as specified and directed.

Fixing only chain link fencing including line wires, any type of standards, rails, straining bolts, etc. including provision of binding wire any position complete all as specified and directed

M&L for mild steel, iron work including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire , etc.; flat iron fillets ( for securing wire mesh etc. including all necessary drilling, bolting or riveting , etc., and similar work conforming to Fe 410 -O of Fe 310 -O grade including providing two coats of synthetic enamel paint all-round over and including one coat of red oxide primer complete all as specified and as directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed to other, or screwed both ends, each screwed end to be fitted with washers and hexagonal or square nut length of bolt exc 10cm but n. exc 20cm long and dia of neck 11 to 16 mm complete all as specified and directed.

S&F mild steel, 1.25mm thick- plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified and directed.

M&L for rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete surfaces/stone masonary and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar (1:4) on concrete/fair surfaces of block masonry, finished even and smooth without using extra cement with and including mixing WPC as per manufacturer’s instructions complete all as specified and as directed. Note- WPC shall be measured and paid for separately.

Supply only Integral water proofing compound.

M&L for preparation of newly plastered surface of walls & applying two coat of cement base paint over a coat of primer complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls & applying one coat of cement base paint camouflage including cleaning /washing complete all as specified and directed.

M&L for preparation of old plastered surface of wall & applying one coat of white wash complete all as specified and directed.

M&L for preparing of old decorated plastered or un plastered surfaces of walls including washing, rubbing down and stopping of distempered surfaces and applying one coat of distemper oil emulsion paint, white or tinted complete all as specified and directed.

M&L for preparing old decorated plastered or un plastered surfaces of walls including washing, rubbing down and stopping of distempered surfaces and applying two coats of distemper oil emulsion paint, white or tinted complete all as specified and directed.

M&L for applying 2mm thick wall care putty on wall as required complete all as specified and directed.

M&L for preparation of steel surfaces of any description, over 10cm in width or girth,& applying two coats of synthatic enamal paint complete all as specified and as directed.

Taking down chowkhats or frame exe. 1.5sqm and n. exc. 4 sqm each with shutter (without taking out shutter from the fame) complete all as specified and directed.

Taking down chowkhats or frame not exc 1.5 Sqm each (without taking off shutters from the frame) complete all as specified and directed.

M&L for second class soft wood plain, solid straight chowkhat and frames, wrought framed rebated on the solid rounded or chamfered, put together with glue penned and joints. complete all as specified and directed.

S&F plain, framed, paneled shutters 35mm thick (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

M&L for second class soft wood 30mm Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

M & L for applying two coats of synthetic enamel point over a coat of pink primer including preparation of new wooden surface exc 10 cm width or girths complete all as specified and directed.

S & F mild Steel butt hinges 100mm long medium weight complete all as specified and directed.

S & F mild Steel butt hinges 75mm long medium weight complete all as specified and directed.

S & F 200 Mild steel barrel tower bolts, stove enameled black, with bright bolt complete all as specified and directed.

S & F 150 Mild steel barrel tower bolts, stove enameled black, with bright bolt complete all as specified and directed.

S & F 300mm long Mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S & F aluminum handles, cast type, anodized 150mm long complete all as specified and directed.

S & F aluminum handles, cast type, anodized 125mm long complete all as specified and directed.

M & L sheet glass 3mm thick ordinary quality and glazing with oil putty / wooden beading of appropriate size in square/ rectangular n.exc 0.5 in each pane, 3mm thick. complete all as specified and directed.

M&L for one coat of synthetic enamel paint over a coat of pink primer on old wooden surfaces including preparation of surfaces over 10 Cm width or girth. complete all as specified and directed.

S&F plywood, grade BWR type BB fixed with screw to timber frame of 9 to 12mm thick complete all as specified and directed.

S&F Eaves Boarding of 20mm thick of 2nd class Softwood fixed with nails in any situation (except flooring and skirting), Planed one side with butt joints. complete all as specified and directed.

M&L for 75 mm thick plain cement concrete, type D-2, (1:4:8) using 40 mm graded crushed stone aggregate as in sub base complete all as specified and directed.

M&L PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in kerb or mud stops rounded or chamfered on edges all as specified for copping, including weathering slightly rounded or chamfered using form work (Straight or curved) complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in plinth protection, surfaces finished even and fair, complete all as specified and directed.

M&L for plain fillet, square, rectangular or triangular in section, clean sawn exc 3 Sqcm sand not exc 6 Sqcm secured with nails complete all as specified and directed.

Dismantling of timber scantlings 40 sq cm and over in sec in any position in framed work, carefully complete all as specified and directed.

M &L for second class soft wood as in scantling clean sawn fixed in position complete all as specified and directed.

Refixing for second class soft wood as in scantling clean sawn fixed in position but except wood complete all as specified and directed. Note:- Scantling retrieved from item No.46 shall be re used.

M&L for 9 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with nails to timber frame work in ceiling complete all as specified and directed.

M&L for PVC(SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F GI tube 15 mm dia medium grade galvanished with all fittings laid in floors /wall etc. complete all as specified and as directed.

S&F GI tube 20 mm dia medium grade galvanished with all fittings laid in floors /wall etc. complete all as specified and as directed.

S&F Stop valves cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore pipe complete all as specified and directed.

S&F bib taps cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule of 15mm bore.

S&F false ceiling E-Board 600x 600mm tile 10mm thick semi perforated coloured, Anodised aluminium snap grid frame work (Size of grid 605 x 605mm )with GI suspended system, metal frame work, G.I. wire mesh in false ceiling complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed, in any length, laid in trenches or in floors / fixed to walls complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed, in any length fixed to walls / floors or in trenches complete all as specified and directed.

S&F PVC (SWR) bends any radius, 110mm bore, fitted with oval access door complete all as specified and directed.

S & F 110mm dia PVC bends (SWR) pipe complete all as specified and as directed

S&F PVC (SWR) bends any radius, 75mm bore, fitted with oval access door complete all as specified and directed.

M & L for chequered cement concrete tiles 25cm X 25cmX22mm or (300x300x22mm thick) as per direction of GE , set & jointed, pointed in neat cement slurry in floor with gray cement and pigment over cement screed 15mm thick in Cement Mortar 1:6 complete all as specified and directed.

M&L for PCC (1:4:8) type D-2, (using 40 mm graded stone aggregate),75 mm thick, as in sub base for floor finished even and rough complete all as specified and directed.

M&L for walling of random rubble, uncoursed well bonded, bedded and solidly hearted built in CM 1:4 complete all as specified and directed

Extra over stone walling for hammer dressing to face stone and dressing of face beds and joints complete all as specified and directed.

M&L flush pointing of random rubble stone masonry in CM 1:4, uncoursed or brought upto courses complete all as specified and directed.

Demolition of cement concrete (Un reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

All as per item No 68 above but plain sheet as in roof covering /cladding to wall fixed with tapping screws complete all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS.11611979 grade St.-240 FE-410 complete all as specified and directed.

M&L for preparation of old steel Surfaces of any description, over 10cm in width or girth, & applying one coats of synthetic enamel paint complete all as specified and as directed.

M&L for glazed ceramic colour tiles in vertical surface of size 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tile on 10mm thick screed in CM 1:4 complete all as specified and directed.

M&L Non-skid Ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M/S SAJAA CONSTRUCTION COMAPNY

M/S MUNEER AHMAD WANI CONSTRUCTIONS

M/S RJ BUILDERS

patriotic builders

Bidder Name

M/S RJ BUILDERS

M/S SAJAA CONSTRUCTION COMAPNY

patriotic builders

M/S MAHIR MUNEER

M/S MUNEER AHMAD WANI CONSTRUCTIONS