Civil Works

Amount

Attending all day to day maintenance complaints of carpentry works complete excluding the cost of materials but including cost of washers, nails, clamps, screws ,drill machine,bit etc and for all lead & lift etc as per direction of Engineer-in-Charge. The material required for maintenance shall be arranged at site by the agency and will be paid separately. For the purpose of attending day to day complaints, one assistant carpentor should be available daily and one log book has to be maintained by the staff of contractor duly verified by SDO/JTO(Civil) on daily basis as a proof of attending complaints. (One job will be defined / consists execution of all above items for all required / working days in a month). Cost of all T&P like washers, nails, clamps, screws,feviquick ,fevicol,drill machine,bit etc ladder etc for attending the work, shall be arranged by the contractor and nothing extra shall be paid separately.The material required for attending the complaints shall be arranged by the contractor at site and paid under sub head of "supply of material " of the agreement.

Engaging helper for attending day to day maintenance jobs for /carpentry & all other works related to day to day maintenance.( One job will be defined/ consists execution of all items for the working days as & when required on call basis). All T&P like washers, nails, clamps, screws,feviquick ,fevicol,drill machine,bit etc ladder etc for attending the work, shall be arranged by the contractor and nothing extra shall be paid separately.The material required for attending the complaints shall be arranged by the contractor at site and paid under sub head of "supply of material " of the agreement.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws excluding, panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.

Kiln seasoned and chemically treated hollock wood/hard wood. 30 mm thick shutters

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to40 mm thick :

Ply wood 5 ply, 9 mm thick : Decorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS1328 BWR Type

Providing wood work in frames of doors/Windows and, clear story window other frames, wrought framed and fixed in position including cost of all nails, screws etc but exluding labour cost for fixing.

Kiln seasoned and chemically treated Hollock wood/ Hard wood

Renewing glass panes, with putty and nails wherever necessary including cost of all nails, screws etc but exluding labour cost for fixing.

Glass panes of 4mm thick.

Renewing glass panes and refixing existing wooden fillets:

Float glass panes of thickness 4 mm .

Refixing old glass panes with putty and nails .

Credit of materials / items obtained from dismantling being unserviceable.

MS fittings for doors & windows like SDB, TB, Handle, Hinges etc

Aluminium fittings for doors & windows like SDB, TB, Handle, hinges etc.

Hydrolic door closer, hydraulic floor springs

Credit of wooden door/ windows shutter i/c fittings obtained by dismantling etc. and disposal of unserviceable material within 50 m lead etc. of area up to 2.50sqm.

Repairing of windows grill, railing etc by welding with Electric plant / gas plant including transportation of welding plant at site & other required T&P is to be arranged by Agency. MS sections shall be paid for separately.

SUPPLY OF MATERIAL Providing / supplying following anodised aluminum fittings with nail, screws etc where ever required but excluding labour cost.

Aluminium sheet

Anodised aluminium Sliding door bolt i) 250 x 16 mm

Anodised aluminium Tower bolt i) 200 x 10 mm

Anodised aluminium Handlesi) 125 mm

Aluminium hanging floor door stopper with twin rubber & stopper

Hydraulic door closer TUBULAR design type, Aluminium section body (ISI Mark)

Box type hinges for steel windows (50x50 mm)

Providing / supplying following MS black / bright finished fittings with nail, screws etc where ever required but excluding labour cost.

Handles i) 100 mm

Hasps and staples (safety type) i) 115 mm

Butt Hinges i ) 100 x 58 x 1.90 mm

Butt Hinges ii) 75 x 47 x 1.70 mm

Nickel plated M.S. pipe curtain rod 20 mm dia not less than 1.00 mm thickness with M.S. bracket if required

M.S. Wire gauge of 0.56 mm dia for renewing of wire gauge of doors & windows including new wooden beading of required size if required as per site condition

M.S. oxidised single acting spring hinge with screws.

Providing / supplying following MS oxidised fittings with nail, screws etc where ever required but excluding labour cost.

Sliding door bolts i ) 300 x 16 mm

Sliding door bolts ii ) 250 x 16 mm

Tower bolts (barrel type) oxidized mild steel i) 250 x 10 mm

Tower bolts (barrel type) oxidized mild steel ii) 150 x 10 mm

M.S. Handle (fastener) for steel windows including bolts and nuts and washer i) 150 mm

Oxidised M.S. Casement stay(Straight peg type) i) 300 mm

Providing / supplying panelling to doors & windows with nail, screws, adhessive etc where ever required but excluding labour cost.

12 mm thick BWP commercial ply on both faces.

6 mm thick BWP commercial ply on both faces.

Providing / supplying wooden boards in shelves, counters, drawers, wall panelling etc with nail, screws, adhessive, lipping as directedby Engineer in charge etc where ever required but excluding labour cost.

18 mm thick block board (BWP type ISI marked) including lipping and beading on exposed face.

5 mm thick(float glass) glazing in aluminium door,window,ventilator with EPDM rubber/neoprene gasket.

MISCELLANEOUS BUILDING WORKS Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing 2nd class teak wood lipping / moulded beading of size 20mmX5mm fixed with wooden adhesive of approved quality and screws /nails as per direction of Engineer-in-charge but excluding cost of labour.

Providing bright finished brass handles with screws etc. complete excluding labour cost for fixing :

Providing aluminium door sill with necessary screws all complete excluding labour cost for fixing.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :

Two or more coats on new work.

SAI CONSTRUCTION CO