Thirumuruganpoondi Municipality Replacement of Borewell Submersible Pumpset Flushing and EB Charges at Kaniyampoondi Cross cut at ward no 17 in Thirumuruganpoondi Municipality

Amount

Rate for flushing of borewell of 6" dia requiring less than 4 hours operation using drill rods/ hose with required size of pipes for various capacity compressor including transportation, labour, and fuel charges for compressors as directed by the TWAD Officer and conducting yield test by 'V' notch method if required.

600 Cfm ( 100 /150 PSI)

Supply and delivery of LT Three phase wet type 5HP SUBMERSIBLE MOTOR-Supply and delivery of clear water vertical wet type submersible pumpset suitable for 150mm dia borewell conforming to IS 8034/2002 as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continous rated two pole suitable wet type vertical squirrel cage induction motor as per IS9283 /1995 as amended there after, suitable for operation in AC three phase 415 V+/- 10 %, 50 HZ +/- 5 % (50x200) without panel board

Supplying and delivery of the following water supply materials with ISI specification

PVC INSULATED AND SHEATHED 3 CORE FLAT TYPE COPPER CABLE CONFORMING TO IS 694/1990 AND AS AMENDED THEREAFTER 4sqmm

Supply and fixing of 40mm UPVC Column Pipes which includes all labour charges etc,.complete

Supply and fixing of G.I. SPECIALS AS PER IS 1239/PART II 40mm G.I union

Supply and fixing of G.I. SPECIALS AS PER IS 1239/PART II 40mm G.I. Bend

Supply and fixing of G.M GATE VALVES AS PER IS BS 5154 and related IS Specifications 40mm Gate valve

40mm G.I Clampset

140mm End Cap (PVC)6 gauge

Adapter

Supply and delivery of M.S. Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x50mm x4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25mm x 3mm including cutting, welding, grinding, locking arrange

Labour charges for the erection of submersible pump set in bore well /open well including fixing and jointing submersible cable with proper clamps up to the starter to require depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges up to the exterior wall of pump room and erection of panel board consisting of TPICN switches starter voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pump set and trail run for 10 days.

5.00 HP Submersible motor

Supply and fixng of TNEB Moter Board suitable for 3 Phases 63A service connection made up of suitable angle iron frame work of size 2 feet x 1 1/2 feet using angle iron of size 1 1/2" x 1 1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos 63A fuse units (500V) 1 No. Neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 7/16 PVC insulated copper wire with earth connection complete (SD-129)

ADD GST 18%

BLUENEST SERVICES (BID ID -1191229)