Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.3 LAccepted-AOC | L1 | Accepted-AOC AOC | |
| 2 | L2₹5.8 L+₹38,580 (7.17%)Rejected-Finance | L2 | Rejected-Finance Rejected |
Tender Value
₹5.7 L
EMD Value
₹11,350
Closing Date
5 May 2025, 11:00 amClosed
Executive Engineer
Jal Shakti Division Solan
SH Laying, jointing of sewer pipe of 150mm dia for some left out area of Zone-B at ward No. 10 and 11
2025_HPIPH_104353_1
3092-3191 dated 24.04.2025
Open Tender
Pipe Laying Works
Item Rate
30 days
Ward No. 10 and 11
please refer tender notice
8 documents required · 8 mandatory
₹500
Executive Engineer
₹11,350
17 Jun 2025
24 Apr 2025
5 May 2025
24 Apr 2025
5 May 2025
24 Apr 2025
Amount
Demolition below G.L upto 1.50 Metres depth and disposal of unserviceable materials with in 20 metre lead Un-reinforced cement concrete more than 15 cm thickness complete in all respect.
Excavation in drains and channel etc in earth work in all kinds of soil such as kankar, moorum shingles conglomerate saturated soil and decomposed soft and hard rock hard rock including including dressing of sides and beds , disposing of excavated earth with all leads, lifts disposed earth to be levelled and neatly dressed and then returning the stacked soil into foundation and trenches etc. including ramming and consolidating the same whereever required with all leads, lifts and including jungle clearance and as per the direction of Engineer-in-charge.
Laying & jointing in tenches centrifugal cast ductile iron (spun) pressure pipes confirming to IS 8329/1994 class K-7 inside cement mortar lined suitable for tyton (push on joints) for sewer lines including cutting of pipes, chamfering where required (earth work in trenches and jointing of pipes to be measured and paid for separately) including carriage upto the site of work, testing etc. complete as per instructions of the Engineer-in-Charge.
150mm dia
P/Laying and fixing in tenches centrifugal cast iron fitting confirming to BSEN 545/9994 Class-A Series K-12 with in side cement mortar lines suitable for tyton (push on) joints with sewers, such as socketed bends of all degrees, socketed tees, collars and all other required fittings, including carriage upto the site of lwork, testing etc. complete as per instructions of the Engineer-in-Charge (earth work in trenches and jointing of fittings to be measured and paid for separately)
Socketed tees 150mm*150mm dia
Constructing mainhole with RCC top slab in 1:2:4 mix in 1 cement :2 sand: 4 graded stone aggregate 20mm nomial size ) foundation ceoncrete 1:4:8 (1 cement: 4 sand: 8 graded stone aggregate 40mm nomizal size) inside plastering 15mm thick with cement mortar 1:3 (1 cement: 3 sand ) finsihed with floating coat of neat cement and making channels in concrete 1:2:4 mix (1 cementn: 2 sand: 4 graded stone agreegate 20mm nominal size) finished smooth complete i/c curing and testing of follwoing inside Size of Brick Masonary SFRC manhole cover and frame, 230mm thick wall of brick masonary including curing complete.
Provding and laying cement concrete 1:2:4: (1 cement:2:sand :4 graded stone agg. 20 mm nominal size) and curing complete exclunding the cost of form work and Tor Steel in foundation and plinths.
Shah Jahan (BID ID -514993)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .