Providing and Fixing of chain link fencing with cement concrete blocks at RongjukII of Nubra Forest Range for the year 2024-25 under the scheme CAMPA

Amount

Earth work in excavation. By manual means, the digging pits in hard soil over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan), including gathering out and disposal of excavated earth lead up to 50mm and rift) up to 1.5m, as directed in charge. ( All kind of soil).

Providing and laying in cement concrete of specified grade include. Curing but excluding the cost of centering and shuttering. All work up to plinth level of 1:3:6 ( 1 cement, 3 coarse sand, stone aggregate of 20mm nominal size crushed stone aggregate) in blocks.

Providing and fixing of Angle Iron Fence Post made of MS angles (50 x 50 x 6mm) in built up sections and framed works including. Cutting housing single section 2.14 Mtr long with 15cm foot/ toe at the bottom with whole drilled and top bends.

Centering and shuttering including strutting, propping etc. removal of form for: Foundations, footings base of columns etc. for mass concrete.

Providing and fixing of G.I chain link fencing fabric 4mm dia fence cold dip galvanized of required mesh size 10cm x 10 cm wire of (4’’ x 4’’) mesh, including strengthening/ binding with 2mm dia wire or nut bolts and washer as required completely

Providing and laying and strengthening of barbed wire at top of the fence post including all jobs.

Supply at site Angle iron post and strand of required size including bottom to be split and bend at triangular in opposite direction of 10 cm length and drill hook up to 10mm dia etc of complete job. Flat

Providing and installation of fabric iron Gates 6’ x 12’= 1 Nos with angle iron Framed including. Master pillars (6’’ x 6’’) with cutting hoisting welding and all fitted and fixture and all lead completely

Providing and installation of febric iron Gates 4’ x 6’= 1 Nos with angle iron Framed including. Master pillars (6’’ x 6’’) with cutting hoisting welding and all fitted and fixture and all lead completely.

Providing and fixing MS iron sheet 3mm of require pattern for Sign Board for main Gate Entrance with one coat of steel primier and two coats of paint including departmental logo and writing etc with cement concrete, sizing (6’ x 4;) with 7’.00’’ legs (50 x 50 x 6mm) = 1 Nos including all jobs as directed by incharge.

Carriage of sand and stone agg. by Mechanical Transport from source to working site for a distance of 10.00 Km. Sand and Stone agg.

Carriage of cement. By Mechanical Transport from sources to Ronjuk by an average of 30 Km. Cement

Carriage of Fencing Materials by mechanicals Transport from Leh To Ronjuk for an average of 105 Km.

M/S YOKMA STEEL FABRICATION (BID ID -148038)

M/S TSEWANG STOBDAN (BID ID -148389)

M/S GYALCHAN STEEL FABRICATION (BID ID -148032)

THINLES NORBOO (BID ID -148391)