SPECIAL REPAIR OR REPLACEMENT OF CEILING FANS AGAINST BER FANS AT CHANGSARI AND OTHER SANCTIONED WORKS AT RANGIA AND CHANGSARI UNDER GE RANGIA

Amount

Supply and fixing ceiling fan having sweep size of 1200 mm, 240 volt, BEE 3 star, 3 blades with inetrnal pre-wired, complete all as per specified and as directed by Engineer-in-charge.

Supply and fixing ceiling fan having sweep size of 1400 mm, 240 volt, BEE 3 star, 3 blades with inetrnal pre-wired, complete all as per specified and as directed by Engineer-in-charge.

Supply and fix heavy duty metal body Exhaust fan AC 230/240 volt, single phase, 450 mm sweep, 1400 RPM with louver of approved colour, ISI marked, complete all as per specified and as directed by Engineer-in-charge.

Supply and fix heavy duty metal body Exhaust fan AC 230/240 volt, single phase, 300 mm sweep,1400 RPM with louver of approved colour, ISI marked, complete all as per specified and as directed by Engineer-in-charge.

Supply and fix wall mounted fan, swing type, AC 230/240 volt, single phase, 400 mm sweep of approved colour, ISI marked, complete all as per specified and as directed by Engineer-in-charge.

Supply and fix heavy duty wall mounted fan, swing type, AC 230/240 volt, single phase, 300 mm sweep of approved colour, ISI marked, complete all as per specified and as directed by Engineer-in-charge.

Supply and installation of storage water heater (Geyser) electric of 25 Ltr capacity, BEE 5 star rating complete with necessary inlet and outlet water connection and electric connection, complete all as per specified and as directed by Engineer-in-charge.

Excavation in trenches, not exc. 1.5 m wide and not exc. 1.5 m depth in soft/loose soil, not exc. 10 Sqm on plan and getting out complete all as per specified and as directed by Engineer-in-charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25cm thick in soft/loose soil, complete all as per specified and as directed by Engineer-in-charge.

Taking up cast iron water mains including all fittings, with spigot and socket ends and lead joints including burning out joints and recovering lead for the 80mm bore size complete all as per specified and as directed by Engineer-in-charge.

Taking up cast iron water mains including all fittings, with spigot and socket ends and lead joints including burning out joints and recovering lead for the 100mm bore size complete all as per specified and as directed by Engineer-in-charge.

Taking up or down 20 mm bore steel water tubing and connection including cleaning for re-fixing or removal to store alongwith gate valves complete all as per specified and as directed by Engineer-in-charge.

Taking up or down 25 mm bore steel water tubing and connection including cleaning for re-fixing or removal to store alongwith gate valves complete all as per specified and as directed by Engineer-in-charge.

Taking up or down 50 mm bore steel water tubing and connection including cleaning for re-fixing or removal to store alongwith gate valves complete all as per specified and as directed by Engineer-in-charge.

Re-fixing old 20 mm bore steel water tubing and connection in new or old position including fittings, threading, cleaning for refixing to walls, ceiling or laid in floors complete all as per specified and as directed by Engineer-in-charge.

Re-fixing old 25 mm bore steel water tubing and connection in new or old position including fittings, threading, cleaning for refixing to walls, ceiling or laid in floors complete all as per specified and as directed by Engineer-in-charge.

Re-fixing old 50 mm bore steel water tubing and connection in new or old position including fittings, threading, cleaning for refixing to walls, ceiling or laid in floors complete all as per specified and as directed by Engineer-in-charge.

S&F 25 mm bore 3 layer PP-R pipes SDR 7.4 PN-16 and UV stabilised and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings laid in trenches or fixed on wall including all accessories like tees, bends, sockets, union etc., complete all as per specified and as directed by Engineer-in-charge. Note :- Earth work involved if any will be measured and paid under relevant items of this schedule.

S&F 40 mm bore 3 layer PP-R pipes SDR 7.4 PN-16 and UV stabilised and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings laid in trenches or fixed on wall including all accessories like tees, bends, sockets, union etc., complete all as per specified and as directed by Engineer-in-charge. Note :- Earth work involved if any will be measured and paid under relevant items of this schedule.

S&F 63 mm bore 3 layer PP-R pipes SDR 7.4 PN-16 and UV stabilised and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings laid in trenches or fixed on wall including all accessories like tees, bends, sockets, union etc., complete all as per specified and as directed by Engineer-in-charge. Note :- Earth work involved if any will be measured and paid under relevant items of this schedule.

S&F 90 mm bore 3 layer PP-R pipes SDR 7.4 PN-16 and UV stabilised and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings laid in trenches or fixed on wall including all accessories like tees, bends, sockets, union etc., complete all as per specified and as directed by Engineer-in-charge. Note :- Earth work involved if any will be measured and paid under relevant items of this schedule.

S&F 90 mm bore 3 layer PP-R pipes SDR 11 PN-10 and UV stabilised and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings laid in trenches or fixed on wall including all accessories like tees, bends, sockets, union etc., complete all as per specified and as directed by Engineer-in-charge. Note :- Earth work involved if any will be measured and paid under relevant items of this schedule.

S&F 110 mm bore 3 layer PP-R pipes SDR 11 PN-10 and UV stabilised and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings laid in trenches or fixed on wall including all accessories like tees, bends, sockets, union etc., complete all as per specified and as directed by Engineer-in-charge. Note :- Earth work involved if any will be measured and paid under relevant items of this schedule.

S&F 100 mm bore cast iron sluice valve heavy duty, PN-I, ISI Marked flanged ends drilled having stainless steel/brass spindle with cast iron wheel head conforming IS-14846 complete with nuts, bolts, wahsers, and gaskets including taking down old unserviceable one complete all as per specified and as directed by Engineer-in-charge.

S&F 25 mm bore gun metal globe or gate valve with Iron wheel head screwed both ends for Iron pipe and fixed in GI/PP-R pipe lines and fittings as required including taking down old unserviceable one complete all as per specified and as directed by Engineer-in-charge.

M&L for construction of valves pit chamber of 90x120x90 cm internal size with one brick thick brick masonary wall in cement mortor(1:4), PCC foundation 10cm thick (1:4:8) type D2 with rendering 15 mm thick internally and top surface, MS frame of angle iron 50x50x4mm and 3mm thick MS sheet cover with locking arrangement, hold fast, hinges including painting to steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer and necessory excavation and earth work including dismantling of existing valve pit complete all as per specified and as directed by Engineer-in-charge.

Surface dressing not exc. 15cm deep in soft/loose soil including removing of bushes complete all as per specified and as directed by Engineer-in-charge.

Removing excavated material not exc. 50 m & depositing where directed at a level not exc. 1.5 m above starting point complete all as per specified and as directed by Engineer-in-charge.

M&L for brickwork with sub-class 'B' bricks, straight or curved on plan exc. 6m mean radius built in CM 1:6 complete all as per specified and as directed by Engineer-in-charge.

M&L for brickwork with sub-class 'B' bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as per specified and as directed by Engineer-in-charge.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as per specified and as directed by Engineer-in-charge.

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work or concrete block surfaces finished even and smooth without using extra cement complete all as per specified and as directed by Engineer-in-charge.

Supply only water proofing compound (integral) complete all as per specified and as directed by Engineer-in-charge.

M&L for rendering 15 mm thick in CM 1:6 on other than fair surfaces including finishing even and smooth w/o using extra cement complete all as per specified and as directed by Engineer-in-charge.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint over a coat of primer on wall surface, etc. complete all as per specified and as directed by Engineer-in-charge.

M&L for three coats of white wash on new plastered surfaces including preparation of surfaces complete all as per specified and as directed by Engineer-in-charge.

M&L for hardcore of gauge not exc. 63mm, deposited, spread and levelling in layers not exc. 15 cm thick, watered and rammed to true surface with broken stone or boulder complete all as per specified and as directed by Engineer-in-charge.

M&L for 100mm thick PCC 1:4:8 D-2 using 40mm graded stone aggregate as in sub-base complete all as per specified and as directed by Engineer-in-charge.

M&L for 75mm thick PCC (1:3:6 type C2) using 40mm graded stone aggregate in plinth protection, foot path and hand standing finished concrete surface even and smooth without using extra cement complete all as per specified and as directed by Engineer-in-charge.

M&L for 75mm thick cement concrete 1:2:4 type B0 (using 12.50mm graded stone aaggregate) in floor finished even and smooth using extra cement complete all as per specified and as directed by Engineer-in-charge.

M&L for 20-25mm thick machine cut kota stone slab flooring over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as per specified and as directed by Engineer-in-charge.

M&L for TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape as required and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as per specified and as directed by Engineer-in-charge.

S&F steel work in tubular trusses/posts including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161 complete all as per specified and as directed by Engineer-in-charge.

M&L for 4mm thick Non-asbestos fibre cement designer E- board ceiling of size (595x595) mm fixed in powder coated anodised aluminium frame (snapgrid) of standard section as per manufacturers instructions with screws complete all as per specified and as directed by Engineer-in-charge.

S&F pre-painted gavalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as per specified and as directed by Engineer-in-charge.

S&F pre-painted gavalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as per specified and as directed by Engineer-in-charge.

M&L for 35mm thick second class hard-wood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as per specified and as directed by Engineer-in-charge.

S&F 30mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., without sash bars , edges of framing plain, chamferesd or rounded, fitted with cut and mitred beads for securing glass etc., for windows and ventilators, etc are provided with (stiles and rails 80mm,muntins 60mm & glazing bars 45mm wide) as specified in SSR Pt I Section 8, clause 8.24 (b) complete all as per specified and as directed by Engineer-in-charge.

S&F 3 mm thick Sheet glass, ordinary quality in squares not exceeding 0.5 Sqm in each pane fixed with cut & mitred beads complete all as per specified and as directed by Engineer-in-charge.

S&F 100 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as per specified and as directed by Engineer-in-charge.

S&F 100 mm long extruded Aluminium alloy handles, fabricated type, anodised complete all as per specified and as directed by Engineer-in-charge.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as per specified and as directed by Engineer-in-charge.

S&F 75 mm long extruded Aluminium alloy anodised Butt hinges with galvanized mild steel hinge pin type C-21 complete all as per specified and as directed by Engineer-in-charge.

S&F 100 mm long extruded Aluminium alloy anodised Butt hinges with galvanized mild steel hinge pin type C-21 complete all as per specified and as directed by Engineer-in-charge.

S&F stainless steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples fixed to aluminum window with aluminium beads and screws complete all as per specified and as directed by Engineer-in-charge.

Material and labour for point wiring complete with 1.5 sqmm PVC insulated unsheathed 1100 volts grade cable stranded copper conductor single core in casing caping of 20/25 mm size complete with sunk iron pressed steel terminal box for fitting mounting switch/ sockets regulators etc. with laminated sheet 3 mm thick cover and with 1.5 sqmm PVC insulated copper conductor earth wire and connected to earth dolly for one light point controlled by one switch complete all as specified and as directed by Engineer-in-charge.

Material and labour for point wiring complete with 1.5 sqmm PVC insulated unsheathed 1100 volts grade cable stranded copper conductor single core in casing caping of 20/25 mm size complete with sunk iron pressed steel terminal box for fitting mounting switch/ sockets regulators etc. with laminated sheet 3 mm thick cover and with 1.5 sqmm PVC insulated copper conductor earth wire and connected to earth dolly for one ceiling fan or exhaust fan point controlled by one switch complete all as specified and as directed by Engineer-in-charge.

Material and labour for point wiring complete with 1.5 sqmm PVC insulated unsheathed 1100 volts grade cable stranded copper conductor single core in casing caping of 20/25 mm size complete with sunk iron pressed steel terminal box for fitting mounting switch/ sockets regulators etc. with laminated sheet 3 mm thick cover and with 1.5 sqmm PVC insulated copper conductor earth wire and connected to earth dolly for one 5 Amps socket point on independent board controlled by one switch complete all as specified and as directed by Engineer-in-charge.

All as per serial item no. 58 above but for 5 amps socket point on same board.

All as per serial item no. 58 above but with 4 sqmm (nominal area) cable with 4.00 sq mm size copper earth continuity conductor of green colour for 6 pin 15 A socket outlet on independent boards .

Supply and fix switch piano type 5 Amp single pole one way complete all as specified and as directed by Engineer-in-charge.

S&F socket outlet 2 in 1, 3 Pin, 5 AMPs, flush type complete all as specified and as directed by Engineer-in-charge.

S&F switch socket combination 2 in 1, 3 Pin, 5 AMPs, flush type complete all as specified and as directed by Engineer-in-charge.

S&F switch socket combination 5 pin, 15/16 Amps flush type complete all as specified and as directed by Engineer-in-charge.

S&F ceiling fan electronic type regulator suitable for 1200/1400 mm sweep fan including necessary electric connection complete all as specified and as directed by Engineer-in-charge.

Supply and fix ceiling rose surface backelite three terminal complete all as specified and as directed by Engineer-in-charge.

Supply and fix LED tube light fittings with regal batten for LED, wall mounted, extruded head dissipation & integrated with crystal gladd LED tube light (double/single side connection) 20 W LED 4', 230 V complete with all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable from ceiling rose to tube light fitting complete all as specified and as directed by Engineer-in-charge.

S&F environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagon bulk head back-lit LED luminaire comprising of high brightness LEDs with led lamp 1x10W complete all as specified and as directed by Engineer-in-charge.

Supply and fix MCB SPN 8 way DB double door 240 volt with suitable bus bar rating complete all as specified and as directed by Engineer-in-charge.

Supply and fix MCB SPN 240 Volts 6-32 Amp breaking capacity 10 KA rating complete all as specified and as directed by Engineer-in-charge.

Supply and fix MCB SP 240 Volts 6 to 32 Amps breaking capacity 10 KA rating complete all as specified and as directed by Engineer-in-charge.

S&F 45 W led street light luminaire new generation energy saving & environmental friendly long life versatile pressure die cast aluminum IP 66 roadway luminaire with high power LED as light source and electronic driver fixed on and including GI Bracket of suitable size with electric connection with suitable size cable complete all as specified and as directed by Engineer-in-charge.

M & L for earthing with Galvanised Iron Earth Plate Electrode 600X600X6mm size buried directly in Ground vertically at a depth not less than 2.25 METRE below Ground Level with the Top Edge of Earth Plate at a depth not less than 1.50 METRE below Ground Level connected to Galvinased earth lead wire 4.0mm dia by means of Bolts, Nuts, Check Nuts and Washers of Galvanised Steel, Earth Plate Electrode surrounded by a packed thickness of Char Coal or Coke Dust mixed with common Salt in alternate layers not exc. 150mm thick including Galvanised Iron Pipe 25mm Bore (dia) Light Grade, upto test points above the Floor Level of the Building situated including PCC Pit in Cement Concrete 1:3:6 (20mm Graded Stone Agg-regate) and RCC Cover of size 540X540X50 mm in RCC 1:2:4 (20mm Graded Stone Aggregate) einforced with and including 8.0mm dia TMT Bars @ 100mm centre to centre both ways complete all as specified and as directed by Engineer-in-charge.

M&L for XLPE insulated armoured, heavy duty, electric cable with aluminum conductor 1100 V grade with cross sectional area 16sqmm 2 core complete all as specified and as directed by Engineer-in-charge.

S&F exhaust fan of sweep 300 mm with metallic blade including cutting of hole on wall to fix the exhaust fan and electric connection from ceiling rose to fan complete all as specified and as directed by Engineer-in-charge.

Surface excavation not exc. 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and as directed by Engineer-in-charge.

M&L for plain cement concrete type D-2 1:4:8 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed by Engineer-in-charge.

M&L for hard core of gauge exc. 63 mm but not exc.100 mm, deposited, spread and levelled in layers not exc. 150mm thick, watered and rolled/rammed to a true surface complete all as specified and as directed by Engineer-in-charge.

M&L for 100 mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) in flooring/ hard standing laid in alternate bays including finishing the surface even and fair without using extra cement complete all as specified and as directed by Engineer-in-charge.

M&L for forming construction joint 30 mm deep x 10 mm wide filled with sealing compound grade "A" complete all as specified and as directed by Engineer-in-charge.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-in-charge.

All as per serial item no. 81 above but TMT bar of size 6 to 8 mm dia.

M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams etc. complete all as specified and as directed by Engineer-in-charge.

All as per serial item No. 83 above but for soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc. 200mm thick (horizontal or sloping) complete all as specified and as directed by Engineer-in-charge.

M&L RCC 1:2:4 type B-1 20mm graded aggregate as in beams, cantilevers, bressummers, lintels over 1.5 m span complete all as specified and as directed by Engineer-in-charge.

M&L RCC 1:2:4 type B-1 20mm graded aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and shelves complete all as specified and as directed by Engineer-in-charge.

M&L for Rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM (1:6) complete all as specified and as directed by Engineer-in-charge.

M&L for PCC (1:3:6) type C1( 20 mm graded aggregate) as in copings, bed plates, cills etc including weathering complete all as specified and as directed by Engineer-in-charge.

S&F flat iron hold fasts with plate washers and similar small articles (Fe-290 gde E-165) complete all as specified and as directed by Engineer-in-charge.

S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. Within 20mm of the length indicated) (fe - 410-W gde E-250 quality -A) complete all as specified and as directed by Engineer-in-charge.

M&L for 75 mm thick PCC (1:4:8) type D-2 as in sub base of floors complete all as specified and as directed by Engineer-in-charge.

M&L for 25 mm thick PCC (1:2:4) type B0 as in floor tapping, finished even and smooth using extra cement complete all as specified and as directed by Engineer-in-charge.

M&L for spreading levelling in layers n.exc 25 cm thick , well ramming including watering as required complete all as specified and as directed by Engineer-in-charge.

M&L for screed bed or bedding layer 15 mm thick in CM (1:6) complete all as specified and as directed by Engineer-in-charge.

M&L for chequered cement concrete tiles 20 cm x 20 cm x 25 mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment complete all as specified and as directed by Engineer-in-charge.

M&L for preparation of new surfaces of steel or iron and application of two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-charge.

Supplying and laying 1100 volts grade heavy duty cable PVC insulated aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed of size 10 sqmm 2 core complete all as specified and as directed by Engineer-in-charge.

Supply and fix MCB SPN 4 way DB double door 240 volt with suitable bus bar rating complete all as specified and as directed by Engineer-in-charge.

All as per serial item no. 58 above but with 2.50 sqmm (nominal area) cable with 2.50 sq mm size copper earth continuity conductor of green colour for 6 pin 15 A socket outlet on independent boards .

S&F switch piano, flush type, single pole, one way, 15 Amps, 230 volts complete all as specified and as directed by Engineer-in-charge.

S&F socket outlet 2 in 1, 230 volts, flush type, 3 pin, 5 and 15 Amp complete all as specified and as directed by Engineer-in-charge.

Supply and fix LED tube light fittings with regal batten for LED, wall mounted, extruded head dissipation & integrated with crystal gladd LED tube light (double/single side connection) 22 W LED 4', 230 V complete with all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable from ceiling rose to tube light fitting complete all as specified and as directed by Engineer-in-charge.

S&F Cast iron/pressed steel terminal boxes 60mm deep for mounting of DBs with 3mm thick plastic laminated sheet cover of size 300 mm X 250 mm complete all as specified and as directed by Engineer-in-charge.

Supply and Fixing house service bracket (hook type) complete with 3.0 m long G.I pipe 40mm dia Medium grade two Nos 90 degree bends, M.S hook and stay or guy including painting with two coats of aluminium paint over one coat of red oxide primer complete all as specified and as directed by Engineer-in-charge.

Demolition of brick work built in any cement mortar complete all as specified and as directed by Engineer-in-charge.

M&L for PCC 1:3:6 type C2 (40mm graded aggregate) as in foundation, filling and mass concrete complete all as specified and as directed by Engineer-in-charge.

M&L for reinforced cement concrete type B-1 1:1.5:3 nominal mix (20mm graded aggregate) in foundation, including rafts, footing, foundations, beams, plinth beams, pile caps under reamed piles complete all as specified and as directed by Engineer-in-charge.

M&L for reinforced cement concrete type B-1 1:1.5:3 nominal mix (using 20mm graded aggregate) as in columns, pillars, posts & struts complete all as specified and as directed by Engineer-in-charge.

M&L for form work of foundation, footing, pile caps, bases of columns &plinth beams similar work vertical or batter complete all as specified and as directed by Engineer-in-charge.

M&L for formwork for side of pillars, posts, columns & similar works vertical or batter complete all as specified and as directed by Engineer-in-charge.

S&F rolled mild steel Fe-410-W (Gde-E-250 quality A) for framed work as in doors, gates or grill of angle or other section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering. doors etc to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings also fastening & fixing complete all as specified and as directed by Engineer-in-charge.

Supplying and laying 1100 volts grade, heavy duty cable PVC insulated aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed of size 6 sqmm 2 core complete all as specified and as directed by Engineer-in-charge.

S&F sheet metal enclosure for DB’s single door, 2 way, 240V suitable for fixing MCB’s complete all as specified and as directed by Engineer-in-charge.

S&F post top energy saving light fitting LED type 25W, 5700K with LED bulb on gate pillar/G.I pipe dia up to 80mm including necessary electric connection complete all as specified and as directed by Engineer-in-charge.

Material and labour for 2.5 Sqmm 3 core PVC heavy duty electric service cable with copper conductor 1100 volts grade complete all as specified and as directed by Engineer-in-charge.

Supply & fixing or laying galvanised steel tubing light grade (ISI marked) for protection of under ground cable on poles/ walls alongwith fixing clamp, nuts, bolts & washers or under road crossing etc of size 32 mm bore complete all as specified and as directed by Engineer-in-charge.

Boring of holes under road, pavement, hard standing, drain etc by conventional method not exceeding 5 mtr in length for laying of protection pipe for cable etc. complete all as specified and as directed by Engineer-in-charge.

Supply and fixing rigid non-metallic PVC conduit heavy duty exclusive of boxes, but inclusive of all tees, bends, elbows, reducers and all fixing accessories of size 25 mm on wall/floor etc complete all as specified and as directed by Engineer-in-charge. Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ.

M/S S.S. Construction

M/S KIRAN ENTERPRISE

RAJKAMAL ENTERPRISE