SPECIAL REPAIRS TO ROOF SHEET AND FALSE CEILING AT BLDG NO T 6, T 7, T 10 AND CERTAIN REVENUE WORKS AND MINOR WORKS AT RANGAPAHAR MIL STN.

Amount

B/R WORKS Dismantling steel (Corrugated or semicorrugated) sheets in roof covering any gauge, thickness, including Nainital or similar pattern complete all as specified and directed.

Dismantling of timber scantling 40 Sq.cm and over in section, in unframed work any position complete all as specified and directed.

Dismantling wall and ceiling board fibre, pulp insulation etc or insulation boards any thickness including cover fillets complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Taking down window shutter with frame not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed.

Demolition of reed lathing single or double including battens and plaster or chicken wire lathing complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:4) on one side of lathing finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10 mm thick in CM (1:6) on other side of lathing finished even and smooth without using extra cement complete all as specified and directed.

S&F for 0.71 mm dia wire netting of galvanised steel wire of size 12 mm mesh fixed with tinned tack of wire staple complete all as specified and directed.

M&L for surface excavation not exc 30cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and directed.

Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation, or for shafts, wells, cesspits, manhole, pier holes, etc not exc 10 sq m on plan and not exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.

Excavation over areas, not exc 1.5m deep,and getting out for foundation, etc. soft/loose soil complete all as specified and directed.

Returning, filling in trenches including shearing , leveling, watering in layers not exc 25cm thick soft loose soil complete all as specified and directed.

Removal of excavated soil not exc 50mtr distance and depositing where directed not exc 1.5m above the starting point complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone)as in foundation filling mass concrete complete all as specified and directed.

M&L Brick work with sub class B brick straight or curved on plan exc 6.00 m mean radious built in CM (1:6) complete all as specified and directed.

M&L for brick work with sub class `B' bricks straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed.

M&L 25mm thick PCC (1:2:4) type B0 (12.5mm graded crushed stone aggregate ) as in Damp proof course to horizontal or vertical surfaces including necessary form work complete all as specified and directed.

M&L PCC 75mm thick type D2 (1:4:8) using (40 mm graded aggregate) as in sub base all complete all as specified and directed.

M&L for 100mm thick PCC (1:4:8) type D-2, (using 40 mm graded stone aggregate) as in sub base over polythene sheet complete all as specified and directed.

M&L for PCC 40mm thick type B-1, (1:2:4) (using 20 mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L 25mm thick PCC 1:2:4 , B1 (20mm graded crushed stone aggregate ) as in floor for level coarse complete all as specified and directed.

M&L for 15 mm thick screed bed or bedding layer in CM (1:6) for laying floor finishes under floor complete all as specified and directed.

M&L Screed bed or bedding layers of mortar 10mm thick for in CM (1:4) complete all as specified and directed

M&L for Non-skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and directed.

S&F Non skid ceramic floor tiles of 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but n.exc 0.36 sqm in floors etc with 15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM (1:6), set and jointed in neat cement slurry and pointed in coloured cement complete all as specified and directed.

All as per item No 27.00 hereinbefore but in skirting including 10mm thick plastering for backing coat in CM (1:4) complete all as specified and directed.

M&L Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

All as per item No 29.00 but on vertical surfaces such as skirting , dado risers to steps over and including 10 mm thick bedding layer in CM (1:4) , set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

S&F steel work in tubular trusses, post, purlins including special shaped washer etc. Complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade st-240 complete all as specified and directed.

S&F for bands, straps, supports or stays for rainwater, ventilating pipes, incl bolts, if reqd : hooks (say), heavy, for large gates, hook and pintle hinges : large hasps and staples; chains; hand made sliding bolts ; clamps; hold fasts; waal ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts,; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick or concrete surfaces in CM (1:4) and finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering in CM (1:3) mixed with water proofing compound @ 3% by weight of cement finished fair faces of brick or concrete surfaces even and fair without using extra cement complete all as specified and directed. Note:- WPC will be measured and paid separately.

Supply only integral water proofing compound ( ISI marked ) complete all as specified and directed.

M&L rendering 10mm thick in CM (1:6) on fair faces of brick or concrete work even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5mm thick plaster in CM (1:3) on fair faces of brick or concrete work finished even and smooth without using extra cement as in ceiling complete all as specified and directed.

M&L for PCC 75mm thick (1:3:6) type C-2 (using 40mm graded) as in plinth protection, foot path, paved area, finished smooth and even without using extra cement complete all as specified and directed.

S&F for pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F for 4mm thick of size 600x600mm HPSC (high pressure Steam Cured) pre-primetered self embossed, textured designer board E-Board Classic to be fixed or laid or inserted to timber/GI/Aluminium frame work with screws, fixed in ceiling flat or sloping complete all as specified and directed.

S&F for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre /intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

M&L for RCC Nominal Mix Type B-1, (1:2:4) (using 20mm graded stone aggregate) as in foundation, including rafts, footings, foundation beams; plinth beams; bases for coloumns, etc basement slabs under reamed piles and mass concrete complete all as specified and directed.

M&L for RCC Nominal Mix Type B-1, (1:2:4) (using 20mm graded stone aggregate)as in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for RCC Nominal Mix Type B-1, (1:2:4) (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for RCC Nominal Mix Type B-1, (1:2:4) (using 20mm graded stone aggregate) as in chajjas complete all as specified and directed.

M&L for RCC Nominal Mix Type B-1, (1:2:4) (using 20 mm graded stone aggregate) as in beams, cantilvers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for RCC nominal mix type B-1, (1:2:4) using 20mm graded aggregate as in lintels complete all as specified and directed.

M&L formwork to sides and soffits of floor or roof beams,beam haunchings, girders, bressumers, lintels, cantilever, shelves including supports, overhangs, etc also splys between floors and beams etc complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick (Horizontal or sloping) for fair finished flat surfaces of concrete complete all as specified and directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

Use and waste of formwork to sides of pillars posts, struts, piers, columns and stanchions finished the suface rough complete all as specified and directed.

Use and waste of formwork to sides of floors or roof beams, beams haunchings, girders,bressummers lintels, cantilevers, shelves including supports overhangs etc also splays between floors and beams etc complete all as specified and directed.

Use and waste of formwork to chajjas, troughts and similar items including edges complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All same as per item No 55.00 above but 5mm dia and over and including 10mm dia in stirrups spacers and binders complete all as specified and directed.

M&L for preparation of new wall surafaces plastered or unplastered and applying three coat white wash on undecorated surfaces complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coat of distemper oil emulsion over a coat of white wash all complete all as specified and directed.

M&L for preparation of preparation of new plastered or un- plastered surfaces and walls including cornices, pilasters etc and applying two Coats of cement base paint complete all as specified and directed.

M&L for preparation of new ceiling surface and two coats of cement base paint on ceiling complete all as specified and directed.

M&L for hardcore of gauge not exc 63mm broken stone or boulders, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammmed to a true surface complete all as specified and directed.

M&L for Chequered cement concrete tiles 25mm thick,set, jointed with grey cement and pigment and pointed in neat cement slurry in floors over 15 mm thick screed bed complete all as specified and directed.

S&F Solid PVC Door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube,supplying and fixing in opening as per specification and drawing complete all as specified and directed.

M&L factory made solid panel PVC door shutter, 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frames shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles plain colour PVC sheets for top rail, lock rail and bootom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame, welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site with three nos of MS higes medium grade complete all as specified and directed.

S&F MS butt hings medium weight cold rolled 100mm size complete all as specified and directed.

S&F 150 mm long aluminium anodised tower bolts complete all as specified and directed.

S&F 100mm long aluminium anodised handles cast copper complete all as specified and directed.

S&F for steel ventilator with top hung shutter including hinges steel peg stay, complete all as specified and directed.

M&L sheet glass, obscured or frosted 3mm thick and glazing with oil putty in squares not exc 0.5 Sqm each complete all as specified and directed.

S&F Sheet glass 4.8mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5sqm in each pane complete all as specified and directed.

S&F Sheet glass 4.8mm thick, ordinary quality and glazing with oil putty in squares exceeding 0.5sqm in each pane complete all as specified and directed.

S&F 20mm bore GI water tubing medium grade laid in floors or fixed in wall with GI fittings complete all as specified and directed.

S&F 15mm bore GI water tubing medium grade laid in floors or fixed in wall with GI fittings complete all as specified and directed.

S&F PVC (SWR) 110mm dia single socketed in any length with rubber ring joints laid in trenches/ floor/fixed to wall complete all as specified and directed.

S&F PVC (SWR) 110mm dia bends in any radius complete all as specified and directed.

S&F PVC (SWR) 110mm dia junction single T equal or unequal with an floor complete all as specified and directed.

M&L for 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches/ floor/fixed to wall complete all as specified and directed.

S&F of PVC (SWR) 75mm dia vent cowl pipe as per specification complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

M&L for DWCPE (SN8) 150 mm (ID) diameter Pipes laid in trenches complete all as specified and directed.

M&L for Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:3:6 type C2 complete all as specified and directed.

M&L for cutting chease for concealed water tubing and making good cutting not exc 10 cm girth in CM 1:3 complete all as specified and directed.

M&L Viterous china ware wash down water closet pan (EWC), pedestal pattern coloured including plastic WC seat black closd pattern eith flat bottom and cover and mild steel chromium plated of aluminised hinging device, complete fiting complete all as specified and directed.

S&F 15mm bore bib tape cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F 15mm bore angle stop cock, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe complete all as specified and directed.

S&F 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve float and dual fluash type complete all as specified and directed. (Make:- Cera, F1020106 or any make as approved by GE).

S&F for PVC Connection pipe 15mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F vitreous china wash basin, size 550 x 400mm white including brackets, and waste coupling & pipe of 32mm dia, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and directed.

S&F toilet paper holder, coloured vitreous china, box type fixed to walls complete all as specified and directed.

S&F soap dish, vitreous china white, aprox size 160 X 160 X 90 mm complete all as specified and directed.

S&F Glass shelves, with 12mm thick desher glass incl CP brackets with brass nuts 300 mm long complete all as specified and directed.

S&F mirror of size 450x600x5mm thick with aluminium frame and mounted on 6mm ply confirming to IS, with two Nos of hanging hooks fixed in repairs complete all as specified and directed.

S&F CP towel rail 600mm long with brackets, chromium plated 20mm dia in repair complete all as specified and directed.

S&F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed.

S&F CP grating 100mm dia PTMT with waste hole (Min wt 25 Gms) complete all as specified and directed.

S&F CP Health Faucet with 1 mtr metalic Expandable tube & hook complete all as specified and directed for WC complete all as specified and directed. (Make:- SONA/ADSON/ ESSCO or any make approved by GE).

S&F brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed 15mm dia pipe complete all as specified and directed.

S&F CP shower roses with or without swivel joints,any size, including fixing to steel pipe or union complete all as specified and directed.

M&L for preparation of new painted surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer on new surfaces in any tint complete all as specified and directed.

S&F for vitrious china urinal, half stall type, white including flushing cistern, flush pipe and waste pipe. CP waste coupling complete all as specified and directed.

S&F rotational moulded polyethylene 1000 Ltrs Capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia complete all as specified and directed.

S&F 20mm gun metal, globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed.

M&L for precast cement concrete (1:2:4) type B-1 using 20 mm stone aggregate as in manhole cover slabs round square or rectangular in shape and set in CM 1:4 complete all as specified and directed.

M&L cement concrete 1:3:6 type C-2 (20 mm graded agg ) in surface channels and drains complete all as specified and directed.

Extra for forming fair finished surfaces of drain or channels, inner girth 30 cms, using extra cement including forms, moulds mitred/ stopped ends etc complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 (40mm grade stone aggregate) as in bed to 110 mm dia SGSW /PVC pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L for PCC (1:2:4) type B-2 150 mm thick (using 40mm graded crushed stone aggregate) as in Septic Tank complete all as specified and directed.

M&L for RCC (1:2:4) (20 mm graded stone aggregate) as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and shrlves and the like complete all as specified and directed.

M&L for 10-15mm thick Endura tiles laid and jointed with grey cement slurry mixed with pigment in floor to match the shade of the tiles complete all as specified and as directed.

All as per item No 111.00 but in dado/ skirting complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed

S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc.complete all as specified and directed.

S&F for anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section of size 40 x 18 x 1.29mm thick including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.

S&F for aluminium door shutters, without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing ,handles 2 Nos in each door,hinges, anodised aluminium snap beading screws,mortice lock with keys etc. complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and directed.

S&F for aluminium (extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F 25 mm dia aluminium drapery rod with cherry colour ornamental attachement at both ends and one set of ornamental decorative finish clamps and matching rings minimum 8 Nos in one running meter complete all as speccified and directed.

M&L for fixing 4 mm thick anodised aluminium composite panel fixed in aluminium frame including necessary rubber beading, jointing cleats complete all necessary items to fix with frame complete all as specified and directed.

M&L of sand filling under floor well ramming including watering as required Spreading & leveling in layers n.exc. 25cm thick complete all as specified and directed.

S&F Plates (plain or chequered) channels square cut or notched ) (ordinary and counter sunk) forming holes, without any attachment of Fe-410-W (Gde-E-250 quality-A) complete all as specified and directed.

S&F bands, straps or stays , plain angle cleat or flat iron cleat or securing purlins to wood trusses or rafters, knee piece and similar small articles etc conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F for second class hardwood weather boarding, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps complete all as specified and directed.

Dismantling boarding of any description and fixed in any position fixed with nails or screw complete all as specified and directed.

Dismantling asbestos cement (Corrugated or semicorrugated) sheets in roof covering complete all as specified and directed.

S&F for post of Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) confirming Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed.

M&L for PCC (1:2:4) Type B0 (using 12.50mm graded stone aggregate) in cills, steps; seismic and other similar bands,plinth courses, tring courses,lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed incl necessary form work complete all as specified and directed.

M&L for preparation of wood and wood based surfaces and applying two coats of synthetic enamel paint on new surfaces complete all as specified and directed.

M&L for glazed ceramic tiles in vertical surfaces 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick CM (1:4) backing coat complete all as specified and directed.

E/M WORKS Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, bell/ buzzer, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good to the disturbed surfaces of walls, ceiling, floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface complete all as specified and directed.

M&L for Point wiring complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable 1100 volts grade with multi-stranded copper conductors, drawn through and including PVC double locked Casing & caping including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etc. with 3 mm thick plastic laminated sheet cover of suitable size as required at site complete all as specified and directed. Make:- Richa/Finolex/RR Kabel or any equivalent make as approved by GE Make of caping/casing & PVC boxes :- Prestoplast/Finolex/supreme or any equivalent make as approved by GE

One light/Exhaust/Call bell pointcontrolled by one, one way switch .

One 3 pin socket outlet 5 Amps on the same board with other switches.

One 3 pin socket outlet 5 Amps on the switch socket combination.

All as per item No-132.00 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dollycomplete all as specified and directed.

M&L for Switch piano flush type single pole, one way 5A complete all as specified and directed. Make : Anchor/Legrand/Kinjal or any equivalent make as approved by GE

M&L for Socket outlet, 2 in 1, 5 pin 5A flush type complete all as specified and directed. Make : Anchor/Legrand/Kinjal or any equivalent make as approved by GE

M&L for Switch Socket combination, 2 in 1, 5 pin 6A flush type complete all as specified and directed.. Make : Anchor/Legrand/Kinjal or any equivalent make as approved by GE

M&L for Switch Socket combination, 2 in 1, 5 pin 6A/16A flush type complete all as specified and directed. Make : Anchor/Legrand/Kinjal or any equivalent make as approved by GE

M&L for stepped type electronic fan regulator 100 Watt socket size flush type on the existing phenolic laminated sheet etc complete all as specified and directed. Make : Anchor/Legrand/Kinjal or any equivalent make as approved by GE

M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body with PVC round/squareblock complete all as specified and directed. Make : Anchor/Legrand/Kinjal or any equivalent make as approved by GE

M&L for replacement of Bell AC 230 volts musical type complete all as specified and directed. Make : Anchor/Legrand/Kinjal or any equivalent make as approved by GE

M&L for bell push, flush type, 5 Amps complete all as specified and directed. Make : Anchor/Legrand/Kinjal or any equivalent make as approved by GE

M&L for sub main wiring with two runs of 4.0 Sq mm and one run of 4.0 Sq mm for earth wire with multi standard copper conductors of , 1100 volts grade, drawn through and including PVC double locked Casing & caping including complete all as specified and directed. Make:- Richa/Finolex/RR Kabel or any equivalent make as approved by GE Make of caping/casing & PVC boxes :- Prestoplast/Finolex/supreme

S&F for, IP>= 20, Class I, LED light fitting 1 x20 W (4 FT), 240V, PF-0.9, CRI ≥= 80, CT>= 6000 K, wall /surface mounted, integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size in & incl flexible hose from ceiling rose to fitting complete all as specified and as directed. Make : Crompton Greaves Cat Part No : CCS-102-20-SL-DP-NWH/Bajaj/Philips or any equivalent make as approved by GE

All as per item No- 143.00 here-in-before but 9 Watt LED 2' Wall mounted with polcarbonate housing/battern complete all as specified and directed.

S&F LED luminaire 600 mm x 600 mm, 40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size with all accessories internally pre wired complete all as specified and directed. Make: CG/Bajaj/Philips or any equivalent make as approved by GE

M&L for LED 1x20W building Security light fitting, drawn through including GI bracket of 25mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling holes as required and connecting up with flexible copper cable of size 0.75 Sq mm 3 core from ceiling rose to the light fitting complete all as specified and directed. Make:- Havells Cat No Endurapearl SL20WLLED757SASYTOPCMP /Bajaj/Philips/CG or any equivalent make as approved by GE

Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holder, ceiling fittings, bulk head fittings, tubelight fittings and regulators etc for reuse at site or carrying to the store (To be measured only when found serviceable in all respect complete for reuse).

M&L for MCB Distribution board double door type SPN 8 way, sheet steel, powder painted, with neutral link & earth bar etc. and fixing MCBs of various rating capacity including taking down old unsv MCB DBs complete all as specified and directed. Make : Legrand Cat Part No 507611/ABB/Siemens or any equivalent make as approved by GE

S&F MCB SPN 40 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning incl taking down old unsv MCB complete all as specified and directed. Make:- Legrand Cat No 408636 or equivalent in ABB/Siemens or any equivalent make as approved by GE

S&F MCB SP 6-32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning incl taking down old unsv MCB complete all as specified and directed. Make:- Legrand Cat No 408587-95 or equivalent in ABB/Siemens or any equivalent make as approved by GE

M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 16 sq mm, 2 core complete all as specified and directed. NOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting out in soft/ loose soil complete all as specified and directed.

Returning filling in trenches including spreading leveling watering and well ramming in layers not exceeding 25 cm thick all complete all as specified and directed.

Removing of excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all complete all as specified and directed.

M&L for spread fine river sand in trenches complete all as specified and directed. NOTE: For measurement purpose, punned down thickness shall only be taken.

M&L for laying brick sub class 'B' old size burnt bricks for cable protection of size 230mmx115mmx75mm complete all as specified and directed.

Supply & laying tubes ' Medium grade' galvanised, with all fittings, fixed complete to walls, poles, ceilings or laid in floors/ trenches/ road crossing for protection of cables of size 40 mm dia bore complete all as specified and directed.

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed.

S&F for Ceiling fan 1200 mm sweep, including suitable size of fan hook and connecting up with three core twisted flexible copper conductor cable of suitable size upto ceiling rose complete all as specified and directed. Make : Bajaj/Usha/CG/V-Guard or any equivalent make as approved by GE

S&F exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers complete all as specified and directed. Make : Havells/Bajaj/CG or any equivalent make as approved by GE

M&L for earthing complete with galvanized steel earth plate electrode of size 600x600x6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4 mm dia as earth lead connectd by means of bolts, nuts, washers and check nuts all as shown in electrical plate No 3 of MES SSR Part-I, including testing on completion complete all as specified and directed.

PERFECT BUILDERS AND SUPPLIERS

SHRI HRIDAY NARAIN GIRI

Shri B K Ukil

SHRI MADAN SINGH

SHRI BANARSI PRASAD

sanjay kumar

MS SADHNA RAHUL