Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.3 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹43.3 L+₹2.9 L (7.27%)Rejected-Finance NEAR GAYRTI TEMPLE PURANI GINANI BIKANER | BIKANER | BIKANER | RAJASTHAN | L2 | Rejected-Finance Highest bid quoted other then L1 | |
| 3 | L3₹43.9 L+₹3.6 L (8.80%)Rejected-Finance RM 01 RIDHISIDHI I SRI GANGANAGAR 335001 RAJ | SRI GANGANAGAR | SRI GANGANAGAR | RAJASTHAN | 335001 | L3 | Rejected-Finance Highest bid quoted other then L1 | |
| 4 | L4₹46.2 L+₹5.9 L (14.5%)Rejected-Finance | L4 | Rejected-Finance Highest bid quoted other then L1 | |
| 5 | L5₹46.5 L+₹6.1 L (15.1%)Rejected-Finance | L5 | Rejected-Finance Highest bid quoted other then L1 |
Tender Value
Refer Docs
EMD Value
₹97,340
Closing Date
29 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Sri Ganganagar
Garrison Engineer Sri Ganganagar, Military Engineer services , Sri Ganganagar Cantt Rajasthan-335001
SPL REPAIR TO BLDG AND RW AND MW WORK UNDER AGE BR II AT MILITARY STATION SRI GANGANAGAR(2nd CALL)
2022_MES_542029_2
GE SGNR/ TOK-27 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
GE Sri Ganganagar
D Class a(i) and b(i) for un-enlisted, refer NIT para 8
6 documents required · 6 mandatory
₹500
GE Sri Ganganagar
₹97,340
Yes
21 Oct 2022
8 Aug 2022
31 Aug 2022
8 Aug 2022
29 Aug 2022
8 Aug 2022
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge
M&L for cement concrete type C-2, 1:3:6 (40mm graded aggregate) 75mm thick as in plinth protection,hard standing finishing cement concrete surface even and smooth without using extra cement. complete all as specified and directed by Engineer-in-Charge
M&L 600x300 x7 mm thick glazed ceramic coloured tiles as in vertical sufaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles and incliding 10mm thick backing coat in CM 1:4 complete all as specified and directed by Engineer-in-Charge.
M&L for Non-skid jointless coloured ceramic tiles 7 to 8 mm thick (square /rectanglar) area of each tiles exceeding 0.11 but n exc 0.18 sqm, in each floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as spd & directed by Engr-in-Charge.
M & L machine cut kota stone slab flooring 20-25mm thick (minimum size 55 cms x 55 cms) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing including 15mm of screed bed in CM 1:6 complete all as specified and directed by Engineer-in-Charge
M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed in CM 1:6 complete all as specified and directed by Engineer-in-Charge
M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, vertical/skiting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 complete all as specified and directed by Engineer-in-Charge
Dismantling galvalume sheet (corrugated semi corrugated etc) sheet in roof covering complete all as specified and directed by Engineer-in-Charge.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated manglalore profile steel sheet 0.50mm thick of an colour red having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with J type or L type or cranked hooked and necessary fitting as required complete all as specified and directed by Engineer-in-Charge
S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour red having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with J type or L type or cranked hooked and necessary fitting as required all as specified and directed by Engr-in-Charge.
Dismantling Wall and ceiling boards (fibre, pulp, ACinsulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets & snap grid and any description complete all as specified and directed by Engineer-in-Charge.
S&F for power coated aluminium snap grid frame work for false ceiling including hangers all as specified. (size 605x605mm) complete all as specified and directed by Engineer-in-Charge.
S&F Gypsum board false ceiling of size 600x600x12mm thick for false ceiling panel or tiles for insulation and accoustic purposes , 60 cm x 60 cm in size laid/ inserted to timber/ GI/ Aluminium framework with screws complete all as specified and directed by Engineer-in-Charge.
Demolition concrete in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-Charge.
M & L for 75mm thick cement concrete type C-1, 1:3:6 using 20mm graged aggregate as in plinth protection complete all as specified and directed by Engineer-in-Charge.
M&L75 mm thick cement concrete type D2, 1:4:8 (Using 40mm graded stone aggregate) filling and mass concrete complete all as specified and directed by Engineer-in-Charge
M&L 25mm thick cement concrete flooring type B0, 1:2:4 using 12.5 mm graded aggregate finished even and fair complete all as specified and directed by Engineer-in-Charge.
Demolition of brick work built in cement mortar of any description complete all as specified and directed by Engineer-in-Charge.
M&L brickwork with fly ash Bricks (old size), straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed by Engineer-in-Charge
M&L brickwork with fly ash Bricks (old size), straight or curved on plan exc 6m mean radius, built in CM 1:6 except brick complete all as specified and directed by Engineer-in-Charge
Taking down cement plaster any description including raking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge
M&L 15mm thick rendering in CM 1:6 to brick/ concrete wall surfaces finished even & smooth w/o using extra cement complete all as specified and directed by Engineer-in-Charge.
M&L 15mm thick rendering in CM 1:4 to brick/ concrete wall surfaces finished even & smooth w/o using extra cement complete all as specified and directed by Engineer-in-Charge.
M&L 5 mm thick cement plaster in cement mortar 1:3 on ceiling surfaces finished even and smooth without using extra complete all as specified and directed by Engineer-in-Charge
M & L Preparation of new plastered surfaces of wall and applying two coats of cement base paint over 3 mm thick wall putty over one coat of alkali resistant primer complete all as specified and directed by Engineer-in-Charge
M & L for three coats of white washing on new plastered surfaces of on ceiling surface including preparation of surface complete all as specified and directed by Engineer-in-Charge
M&L two coats cement base paint over a coat of white wash to new surfaces of walls with putty finishes including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.
M&L two coats of oil emulsion distemper over 3 mm thick wall putty over a coat of chalk whiting on newly plastered wall surfaces including preparation of surface finishes complete complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of old decorated wall surfaces by brooming down or steel wire brushing,scrapping down smoke soot,moulds,moss and efflorescent salts and trading oil and greasy spots and then applying two coats of cement base paint with putty complete all as specified and directed by Engineer - in - Charge.
M&L two coats of oil emulsion distemper over old decorated surfaces of wall after complete removal of existing treatment including preparation of surface complete including chalk whiting with putty finishes complete all as specified and directed by Engineer-in-Charge..
M&L two coats of white wash to old surfaces on walls including preparation of surface with putty finishes complete all as specified and directed by Engineer-in-Charge.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) exceeding 1.5 sqm but not exceeding 4 sqm each complete all as specified and directed by Engineer-in-Charge..
Taking down chowkats or frames (without taking off shutters from the frame) not exceeding 1.5 sqm each complete all as specified and directed by Engineer-in-Charge..
S&F Fibreways brand fiber glass Reinforcd plastic (FRP) Door Frames of three legged of cross section 90mmx45mm having single rebate of 32mmx15mm to receive shutter of 30mm thickness. The laminate door frame molded with fibre retardant grade unsaturated polyester resin and chopped mat door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all sides M S Stay shall be provieded at the bottom to stay shall be provieded at the bottom to steady the frame complete all as specified and directed by Engineer-in-Charge.
S&F Fibreways brand fiber 30mm thick glass Fibre Reinforced plastic (FRP) Paneled door shutter of required coloured and approved brand and manufacture made with fibre retardant grade unsaturated polyster resin moulded to 3mm thick FRP Laminate for forming hollow rails and styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings cast monolithically with 5mm thick FRP laminate for panels and conforming to IS 14856-2000 complete all as specified and directed by Engineer-in-Charge.
M&L powder coated anodised aluminium frames for doors, windows, ventilators with one or moe rebates including jointing cleats for fixing etc.including power coating minimum thickness of power coating shall be 50 micron as per the specification) complete all as specified and directed by Engineer-in-Charge.
S&F powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges 3 Nos, powder coated aluminum snap beading screws etc. complete all as specified and directed by Engineer-in-Charge.
S&F powder coated aluminium windows and ventilator shutters, side hung type, without sash bars aluminium saction weighing 0.55 kg/RM including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fitting such as peg stay 150mm long (1 no) hinges type B21 100 mm long (2 No) suitable handle (1No) and including aluminium grill complete all as specified and directed by Engineer-in-Charge.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick sorrounds, glazed with oil putty or fixed with beads complete all as specified and directed by Engineer-in-Charge..
S&F 100mm long butt hinges, heavy weight, cold rolled mild steel complete all as specified and directed by Engineer-in-Charge.
S&F aluminium handle cast type anodised, 150mm long complete all as specified and directed by Engineer-in-Charge.
S&F aluminium anodised barrel tower bolts of extruded section 150mm long complete all as specified and directed by Engineer-in-Charge.
S & F for floor door stopper of aluminium alloy body and tongue, Overall length of cover plate 140mm anodised, with hard drawn steel spring, complete all as specified and directed by Engineer-in-Charge.
S&F in repair door closer hydraulically regulated, alunimiun body designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg or floor spring and fixed complete all as specified and directed by Engineer-in-Charge.
S & F in repair brass mortice lock, vertical type, size 100 mm and 4 lever type complete all as specified and directed by Engineer-in-Charge..
S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-Charge.
M&L two coat of synthetic enamel paint on old painted surfaces of wood and wood based materials over 10 cm width or girth including preparation complete all as specified and directed by Engineer-in-Charge.
M&L two coats of synthetic enamel paint over a coat of pink primer on new surfaces of wooden and wood based materials over 10 cm width or girth including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.
M&L two coats of synthetic enamel paint on old painted surfaces of steel and iron work over 10 cm width or girth including preparation complete all as specified and directed by Engineer-in-Charge.
M&L, two coats of synthetic enamel paint over a coat of red oxide on steel surface over 10 cm width or girth, not otherwise described including preparation of new surface complete all as specified and directed by Engineer-in-Charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engineer-in-Charge.
S&F Roof trusses (framed), trussed, purlines, crane gantries, rails and fastenings and heaving bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats and brackets etc complete all as specified and directed by Engineer-in-Charge.
S&F Roof trusses (framed), trussed, purlines, crane gantries, rails and fastenings and heaving bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats and brackets except roof trusses etc complete all as specified and directed by Engineer-in-Charge.
Dismantling timber scantling 40 sqcm and over in section in any postion all as specified and directed by Engr-in-charge.
S&F second class soft wood timber scanling 40 sq cm and over in section in any postion complete all as spcified and diected by Engr-in-Charge.
S&F 15 mm bore bib tap cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, approved quality screwed for iron pipe. complete all as specified and directed by Engineer-in-Charge
S&F in repairs15mm bib taps cast copper alloy, chromium plated fency type with crutch or butterfly handle screwed down screwed for Iron pipe or for brass ferrule and fixed. Make:- Prayag cat No-8306,parryware Cat No-T3504A1,CERA Cat No-HTF3001151 and equivalent cat part
S & F bib taps,cast copper alloy , chromium plated with crutch or butterfly handle,screwed down,screwed for iron pipe or for brass ferrule and fixed of size 15mm bore complete all as specified and directrd by Engineer in charge.
S&F pillar tap 15 mm size cast copper alloy with capstain heads chromium plated, fancy type, screwed down high pressure with long scrwed shank and fly nuts screwed iron pipe. Approved by Engr-in-Charge.complete all as specified and directed by Engineer-in-Charge
S&F in repair stop valves cast copper alloy, chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends Bore of pipe in 20mm, fixed complete all as specified and directed by Engineer-in-Charge.
S&F in repairs Angle stop valves, cast copper alloy, chromium plated, 15 mm bore screwed down high pressure with crutch or butter fly handle for iron pipe or for union and complete all as specified and directed by Engineer-in-Charge. Make:- prayag cat No-8310,parryware Cat No-T3507A1,CERA Cat No-F3002201 and equivalent cat part
S&F Gate/stop valves 20 mm bore , cast copper alloy screwed down high pressure with butterfly handle screwed both ends for iron pipe complete all as specified and directed by Engineer-in-Charge
S&F 15mm bore stop valve/angle cock, cast copper, chromium plated , fancy type, with long shank and cup (concealed type) screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or fur unions complete all as specified and directed by Engineer-in-Charge
S&F ball valves, 20mm bore, high pressure of CP with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe complete all as specified and directed by Engineer-in-Charge
S&F Grating square 150mm size of PTMT(Minimum weight 50 gms) complete all as specified and directed by Engineer-in-Charge
S&F PVC connection 15mm size with PTMT nuts of length 600mm long suitable for hot water application complete all as specified and directed by Engineer-in-Charge.
S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm long complete all as specified and directed by Engineer-in-Charge.
S&F in repairs PVC gratings 100 mm dia of CP fixed (Minimum weight 25 gms ) complete all as specified and directed by Engineer-in-Charge.
S&F in repairs CP shower rose 125mm size and 15mm dia, fixed complete all as specified and directed by Engineer-in-Charge.
S&F in repair CP towel rail 600mm long fixed with CP brass screws complete all as specified and directed by Engineer-in-Charge.
S & F in repair 15mm dia brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. Make:- Prayag cat No-8550,parryware Cat No-G4636A1,CERA Cat No-F1005501 and equivalent cat part
S&F in repair vitreous China wash down water closet pan (pedestal pattern), white complete, including white seat cover with hinging arrangement and flush jet, including fixing bolts complete all as specified and directed by Engineer-in-Charge.
S&F in repairs vitreous china wash hand basin white flat back of size 550mm X 400mm, fixed with a set of cast iron brackets including cutting and pinning in ends of brackets to wall, provision of 15mm size pillar tap, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter "Hot or cold'' with long scrwed shanks and fly nuts, 32mm dia brass chromium plated waste fittings 450mm long PVC connection of 15mm size with PTMT nuts and 40mm dia waste pipe complete.
S&F in repair, 10 ltr capacity low level PVC valveless, syphonic action type flushing cistern(dual system), white, with inlet, ball valve, flush pipe, PVC connection 15 mm dia and 450 mm long float and handle including bracket complete all as specified and directed by Engineer-in-Charge.
S&F in repair soap dish complete all as specified and directed by Engineer-in-Charge.
S&F in repair toilet paper holder complete all as specified and directed by Engineer-in-Charge.
S&F corner glass shelve for complete all as specified and directed bt Engr-in-Charge.
S&F glass shelve 18" x 5 1/2" for complete all as specified and directed bt Engr-in-Charge.
Taking up or down GI steel water tubing 15mm bore and connections including fittings from floor/walls/ceiling complete all as specified and directed by Engineer-in-Charge.
Taking up or down GI Steel water tubing 20mm bore and connections including fittings from floor/walls/centrings complete all as specified and directed by Engineer-in-Charge.
S & F Galvanised steel water tubing 15 mm bore medium grade with all fittings concealed including cutting chases to brick wall/ceiling or laying in floors and making good complete all as specified and directed by Engineer-in-Charge.
Fixing only tubes, of 15mm bore any grade,(medium) to walls and ceilings or laying in floors complete all as specified and directed by Engineer-in-Charge.
S & F GI steel water tubing 20mm bore medium grade with all fittings and fixed complete to walls ceiling or laid in floors complete all as specified and directed by Engineer-in-Charge.
Fixing only tubes, of 20 mm bore any grade,(medium) to walls and ceilings or laying in floors complete all as specified and directed by Engineer-in-Charge.
Dismantling water tanks any type exc. 250 ltr but nexc 500 ltr complete all as specified and directed by Engineer-in-Charge..
S & F rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part -I (500 Ltrs) capacity.complete all as specified and directed by Engineer-in-Charge.
S&F in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed for bore dia of pipe 20mm.complete all as specified and directed by Engineer-in-Charge.
Dismantling of cast iron or reinforced concrete drain pipes jointed in cement mortar and taking out of trenches, if required complete all as specified and directed by Engineer-in-Charge..
M&L for 100mm dia cast iron sand cast waste and vent pipes in any length with or without ears with cement jointed fixed to wall complete all as specified and directed by Engineer-in-Charge.
M&L for 75mm dia cast iron sand cast waste and vent pipes in any length with or without ears with cement jointed fixed to wall complete all as specified and directed by Engineer-in-Charge.
M&L for 100mm dia cast iron Bends complete all as specified and directed by Engineer-in-Charge..
M&L for 75mm dia cast iron Bends complete all as specified and directed by Engineer-in-Charge. .
S&F in repair stainless steel curtain rod, chromium plated 25mm dia fency type with fixing of decoreted type brackets,stops, rollers including end knobs etc complete all as specified and directed by Engineer-in-Charge.
M&L providing reinfoced cement concrete (nominal mix) in cement concrete 1:2:4 Type B1(20mm graded aggregate) as chajjas etc and similar work complete all as specified and directed by Engineer-in-Charge. (Note : The rate quoted shall be deemed to include use and waste of necessary form work)
M&L TMT bar 10 mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed by Engineer-in-Charge.
Ditto all as per item No 30 above but 5 mm dia and over upto and including 10 mm dia in stirrups spacers and binders complete all as specified and directed by Engineer-in-Charge
M & L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-290(Grade-165) complete all as specified and directed by Engineer - in - Charge.
M&L for concrete bed to drain pipes for 150mm boreincluding packing under, and haunching against the sides of pipes after they are laid andall as specified and directed by Engr-in-charge
M&L for 150mm bore (internal dia) salt glazed stone ware drain pipe, grade ‘A’, laid on concrete bed to required slope, jointed and tested complete all as specified (concrete bed shall be measured and paid for separately).complete all as specified and directed by Engineer-in-Charge.
M&L for sand filling (25mm thick) under floors or in foundations including watering and consolidation complete all as specified and directed by Engineer-in-Charge.
M&L Machine pressed precast rubber moulded concrete coloured interlocking paver block any shape and size confirming to IS 15468-2006 of 60 mm thickness with grey cement and pigment M-35 Grade 20mm graded stone aggregate) complete all as specified and directed by Engineer-in-Charge.
M&L 20 cm x 20 cm x 25 mm thick chequered cement concrete tiles set jointed and pointed in neat cement slurry in floors with grey cement and no pigments including 20mm of screed bed in CM 1:4 complete all as specified and directed by Engineer-in-Charge..
M&L for PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate ) as in foundation filling, sub base for floors etc complete all as specified and directed by Engineer-in-Charge
M&L PCC 1:2:4 type B-1(Using 20mm graded crushed stone agg) in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded for chamfered angles and throating,complete all as specified and directed by Engineer-in-Charge
M&L for Plain Cement Concrete 1:3:6 mix type C1 (using 20 mm graded stone aggregate) cast in situ in lintels up to 1.5 M span, cills and other similar bands, plinth courses, parapets, copings, bed plates, hold fast and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work complete all as specified and directed by Engineer-in-Charge
M&L RCC M-25 design mix using 20 mm graded aggregate in foundations, including rafts, footings, foundation beams, plinth beams, base for columns, etc basements slabs under rammed piles and mass concrete complete all as specified and directed by Engineer-in-Charge
M&L RCC M-25 Slabs supported on walls, beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like, all as specified and directed by Engr-in-Charge.
M&L RCC M-25 design mix using 20 mm graded aggregate as in Beams cantilevers, bressummers lintels over 1.5 m span complete all as specified and directed by Engineer-in-Charge
Supply only Integral water proofing compound complete all as specified and directed by Engineer-in-Charge
M&L for 25mm thick damp proof course to horizontal or vertical surfaces in cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) including necessary formwork, complete all as specified and directed by Engineer-in-Charge
Form work on flat surface in rough finish to sides of concrete foundations, footings, bases of columns, raft beams sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter complete all as specified and directed by Engineer-in-Charge
Formwork to soffits of suspended slabs such as roof slabs,floor slabs thickness n. exc. 200mm in fair finish complete all as specified and directed by Engineer-in-Charge
Form work on flat surface for rough finished flat surface of concret to roof beams, beam haunching, girders, iintals etc. also splays between floors and beem, etc. complete all as specified and directed by Engineer-in-Charge
Formwork to edges of concrete flats and similar works thickness n. exc. 200mm in rough finish complete all as specified and directed by Engineer-in-Charge
S & F second class hard wood plain, solid, staight chowkats and frames wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed by Engineer-in-Charge
M & L for 35 mm thick second class hard wood plain framed panelled shutters (two number of panells) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both fraces. The size of rail and stile as per IS:1003 (Part1), kiln seasoned and chemically pressure treated complete all as specified and directed by Engineer-in-Charge
Taking down chowkats with shutters (without taking off shutters from frames) area of opening not exc 1.5 Sqm each complete all as specified and directed by Engineer-in-Charge
S&F factory made solid panel pvc door shutter/ Cup board shutter 30mm thick (style) consisiting of frame made out of M.S. Tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at the site as per specification & drawing.complete all as specified and directed by Engineer-in-Charge
S&F PVC solid door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, as per specification and drawing in SSR Part-II. Fixed to wall with screw and rawal plug etc complete all as specified and directed by Engineer-in-Charge
Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing including necessary fittings all as specified and directed by Engr-in-Charge
S & F aluminium anodized barrel tower bolts of extruded section 300 mm complete all as specified and directed by Engineer-in-Charge
S&F 300 mm aluminium sliding door bolt with hasp & staple (bolt type) and fixing clip of sheets cast or extruded section and fixing bolt and sliding bolt of extruded section complete all complete all as specified and directed by Engineer-in-Charge
S&F aluminium 4 lever Mortice lock , vertical type, size 100 mm complete all as specified and directed by Engineer-in-Charge
M&L mild steel work as post and hollow square/rectangular tubular truss including special shaped washer including iron cleats etc complete using ERW or induction butt weld tube confirming to IS1161-1998 grade ste -240 complete all as specified and directed by Engineer-in-Charge
M&L for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other each screwed end to be filled with washer and one hexagonal or square nut not exc 5 cm long and diameter of neck 11mm to 15mm complete all as specified and directed by Engineer-in-Charge
S&F Steel ventilator with top hung shutter incl hinges, steel peg stay, including one shop coat of red oxide primer, complete all as specified and directed, complete all as specified and directed by Engineer-in-Charge
M&L for cement concrete type D-2, 1:4:8 (40mm graded aggregate) 75mm thick as in sub base of flooring.complete all as specified and directed by Engineer-in-Charge
M&L for 25 mm thick PCC flooring 1:2:4 type B-1 (20 mm graded agg) for receiving floor finish tiles etc. complete all as specified and directed by Engineer-in-Charge
M&L for cement concrete type B-1, 1:2:4 (20 mm graded aggregate) 25mm thick as in sub base of flooring. complete all as specified and directed by Engineer-in-Charge
M&L for 3.00 mm thick glass sheet, figured glass, pin head type and glazing with oil putty in square n. exc 0.5 sq. m in each pane.complete all as specified and directed by Engineer-in-Charge
S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floors or fixed to wall 110 mm bore complete all as specified and directed by Engineer-in-Charge
Ditto- all as per srl item No 145 but 75 mm bore complete all as specified and directed by Engineer-in-Charge
S&F PVC (SWR) bends in radius 110 mm bore complete all as specified and directed by Engineer-in-Charge
Ditto- all as per Srl item No 147 but 75 mm bore complete all as specified and directed by Engineer-in-Charge
S&F PVC (SWR) junction single (Single T) 110 mm bore complete all as specified and directed by Engineer-in-Charge
S&F PVC (SWR) vent cowl 110 mm bore complete all as specified and directed by Engineer-in-Charge
M&L PVC SWR floor trap, with grating including joining to waste pipe fixed in cement concrete type B-1 (1:2:4) 75mm dia complete all as specified and directed by Engineer-in-Charge
M&L for Plain cement concrete bed 1:4:8 type D-2 (using 40mm graded crushed stone aggregates)to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150 mm bore pipe, complete all as specified and directed by Engineer-in-Charge
M&L for Salt glazed stone ware drain pipe of 150mm bore (internal bore) garde 'A' laid in trenches and jointed, complete all as specified and directed by Engineer-in-Charge
M& L for Salt glazed stoneware bends and taper bends, of 150mm bore complete all as specified and directed by Engineer-in-Charge
S&F PVC valveless, syphonic action type flushing cistern low level white with inlet ball valve float and handle, 10 ltr capacity including brackets complete all as specified and directed by Engineer-in-Charge
S&F of vitreous china urinals, full stall type, white including flush pipe, waste pipe and providing and fixing plugs, bedding urinal against wall in CM (1:2) securing urinal to plugs, with and including 60mm long brass screws, pointing around urinal back in Cement complete all as specified and directed by Engineer-in-Charge
S&F for Vitreous china wash hand basin, white flat, size 550 x400 mm incl brackets waste coupling and waste pipe all as specified and directed by Engineer - in - Charge.
S & F in repairs water closet vitreous china squatting pan, Orissa pattern size 580 x 440mm white with integral foot rests including provision of lime concrete bedding with `P' trap and connection to drain and to flushing pipe anti syphonage pipe (excluding flushing cistern) complete all as specified.
S&F Cascading waterfall including cascade blade nozzle/sprinkler and required all fittings & fixtures with necessary pumping system complete all as specified and directed by the Engr-in-Charge
S&F stainless steel plate rack 600x750x250 mm thickness of sheet 1 mm thick complete all as specified and directed by Engineer - in - Charge.
Supply, installation, commissioning and testing water storage heater metal body vertical type of capacity 25 Liters suitable for to operate/function on AC 230/240 volts, rated power-2 KW, standing loss (Kwh)-0.511,single phase having heating element of 2KW capacity and high thermal cut-out BEE approved 5 Star rated includinguidng fixed along walls with all fixing material required at site and electric connections with copper cable 3 core and plug top 15A includinguding making good to disturbed surface complete all as specified and directrd by Engineer in charge. Make:- V Guard victo plus 25L, Bajaj Shakti Neo 25L, Havells Monza DX 25L
M & L for concealed conduit point wiring complete for light on independent /combine board with cable 1.5 sqmm (Nominal area) FRLS PVC insulated multistranded unsheathed copper conductor, drawn in and including PVC Concealed conduit pipe medium gradeISI marked 20 mm dia, pipe hooks , elbows, sunken covers and suken boxes , after cutting in wall chasing for conduits and sinking's for sunken iron/ pressed steel terminal boxes, 2 mm thick and 60mm deep , 3 mm thick phenolic laminated sheet top cover for suken boxes flush to surface for one light point/fan point, controlled by one switch on the same board with other switch or independent including PVC insulated unsheathed 2.5 sqmm copper conductor FRLS connected to common earth dolly complete including cutting, chasing the surface and then making good the same in CM(1:3) complete all as specified and directed by Engineer-in-charge.
S&F RCBOs DP 32A, 30 mA for earth leakage, over load and short circuit protection complete all as specified and directed by Engineer-in-charge.
Taking down copper/aluminium point wiring (light,fan,socket or power)complete including fixture and fittings such as switches& sockets and removing materials for taking credit complete all as specified and directed by Engineer-in-charge.
M&L for concealed conduit point wiring complete for light on independent/combine board with cable 1.5 sqmm(Nominal area) FRLSH PVC insulated multistranded unsheathed copper conductor, drawn in and including PVC conduit pipe medium grade 20mm bore,pipe hooks,elbows,junction covers and junction boxes, after cutting in wall chasing for conduits and sinking's for sunken cast iron /pressed steel terminal boxes 60 mm deep, suitable length and 2.1 mm thickness for mounting switches, sockets, fan regulator with 3mm thick plastic laminated seat cover fixed with brass screws and cup washers, duly grouting and painted with red oxide metal primer and making good disturbed surfaces of wall in CM 1:3 with white wash or existing colour including provision of continuous earth contuity conductor along with point wiring of 1.5 sqmm copper FRLSH PVC insulated cable for one light/fan point controlled by one way switch and connected to common earth dolly, complete all as specified and directed by Engr-in-charge. Note: Thickness of sunken box not less than 2.0mm minimum and chasing work should only by done by cutter
All as described in Srl item No -167 here in before but for one switch socket combination 5/6 Amps on independent board complete all as specified and directed by Engineer - in - Charge.
All as described in Srl item No -167 here in before but for one three pin socket outlet 5 Amp on same board with other switches complete all as specified and directed by Engineer - in - Charge.
All as described in Srl item No. 167 here in before but for one three pin socket outlet 5/15 Amps on independent board with 2.5 Sqmm (Nominal Area) FRLSH PVC insulated multistranded unsheathed copper conductor and continuous earth contuity conductor along with point wiring of 2.5 sqmm copper FRLSH PVC insulated cable copper cable complete all as specified and directed by Engineer - in - Charge.
All as described in Srl item No. 167 here in before but for one switch socket combination 6 pin 5/15 Amps on independent board with point wiring of 2.5 sqmm copper FRLSH PVC insulated cable complete all as specified and directed by Engineer - in - Charge.
All as described in Srl item No. 167 here in before but for one industrial socket metel clad plug and socket with MCBs single pole 20 Amp on independent board with 4 Sqmm (Nominal Area) FRLSH PVC insulated multistranded unsheathed copper conductor and continuous earth contuity conductor complete all as specified and directed by Engineer - in - Charge.
S & F switch piano flush type 5/6 Amps single pole one way complete all as specified and directed by Engineer - in - Charge.
S & F switch socket combination 5 pin, type 5/6 Amps flush type complete all as specified and directed by Engineer - in - Charge.
S & F switch socket combination 6 Pin, 15/16 Amps flush type complete all as specified and directed by Engineer - in - Charge.
S & F Socket outlet 5 pin 5 Amps flush type complete all as specified and directed by Engineer - in - Charge.
S & F stepped type, fan regulator not less than 120 watt for ceiling fan 1200/1400mm sweep complete all as specified and directed by Engineer - in - Charge
S & F ceiling rose, surface bakelite 65x50 mm three terminals complete all as specified and directed by Engineer - in - Charge.
S & F industrial socket metel clad plug and socket with MCBs single pole 20 Amp complete all as specified and directed by Engineer - in - Charge
S & F in replacement tube light Fitting LED batten with aliminium housing and integrated electronic driver, 20 watt having input voltage AC90-300V, 50 Hz , 6500K and all other accessories including connection with flexible cable copper conductor twin core of size 23/.2 mm upto ceiling rose/connector complete all as specified and directed by Engineer - in - Charge. Make:Havells cat part No: LUMILINEPLUSBS20WLED865SPCSS, Bajaj cat part no.: BCLSBAL 20W CW ,Crompton cat part no. : CCS-100-20-65-HL2-DP-NWH) and equivalent cat part
S&F security light fitting LED TYPE 25 watt, IP 66, Lumen 10lm/w, surge protection 4kv device with all necessary acessories, Clear transparent acrylic cover, prewire suitable to operated on 230 volt 50 HZ AC & S&Fing to wall / on pole including fixing arrangement with suitable galvanized iron pipe 35 mm bore “light grade” brackets 2 mtr length bent to shape to obtained required shape including clamps, nuts / bots / washers etc connecting with suitable flexible copper wire of size 23/0.0076 complete all as specified and directed by Engineer - in - Charge (Make:Havells cat part no: ENDURAPEARLSL25WLED757SASYTOPCMP, Bajaj cat part no. BRLEP 25W LED WH, Crompton cat part no. LSTS-25-CDL-M) and equivalent cat part
S&F in replacement security light fitting LED TYPE 25 watt, IP 66, Lumen 10lm/w, surge protection 4kv device with all necessary acessories, Clear transparent acrylic cover, prewire suitable to operated on 230 volt 50 HZ AC & S&Fing to wall / on pole including fixing arrangement with suitable galvanized iron pipe 35 mm bore “light grade” brackets 2 mtr length bent to shape to obtained required shape including clamps, nuts / bots / washers etc connecting with suitable flexible copper wire of size 23/0.0076 complete all as specified and directed by Engineer - in - Charge (Make:Havells cat part no: ENDURAPEARLSL25WLED757SASYTOPCMP, Bajaj cat part no. BRLEP 25W LED WH, Crompton cat part no. LSTS-25-CDL-M) and equivalent cat part
S & F in repair water tight bulk head fitting,comprision of connector galvanised cast iron back plate,weather proof enamelled gallery , with electronic driver (new style) 10W upper PVC body all as specified and directed by Engineer - in - Charge Make:Havells cat part no : HEXAFT10WLED857SSYMBOPC, Bajaj cat part no. BIBWP 10W LED, Crompton cat part no. LBHP-10-CDL)
S & F angle holder insulated body with back plate for conduit fittings complete all as specified and directed by Engineer - in - Charge.
S&F LED lamp 9W for angle holder complete all as specified and directed by Engineer - in - Charge.Make : Havells / Crompton / Bajaj
S&F LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holder & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engineer - in - Charge.
S&F surface mounted spotlight in matt finish of 7W LED 6500K complete all as specified and directed by Engineer - in - Charge. Make:- Havells LHEEGBPGPH1W007, HSN code 9504 or equivalent make in Bajaj , philips
S&F in decorative wall light SS finish fixture with textured glass diffuser suitable for 40 W mini GLS lamp complete all as specified and directed by Engineer - in - Charge.
S&F in replacement compact decorative energy efficient LED mirror light fitting with antiglare diffuser and decorative type with driver holder end caps suitable for 1x10 watt fitting 2 ft version including LED lamp 10 watt complete all as specified and directed by Engineer - in - Charge. Make :-Havells cat part No. LUMILINEPLUSBS10WLED865SPCSS, Bajaj cat part No. BCLSB 10 WH, Crompton cat part No. LDL-10-CDL
S&F recess mounting 2x2 feet 36 watt LED luminaire with powder coated CRCA housing with LEDs, seamless front frame with high transmission acrylic cover and fixed electronic driver (surge protector ) complete all as specified and directed by Engineer - in - Charge . Make :-crompton cat part No. LCTLRNE-36-FO-CDL or equivalent make in Bajaj , havells
S & F of sub-main wiring with two single core cables PVC insulated and un-sheathed 6 sqmm (Nominal Area) FRLS stranded copper conductor drawn in and including PVC conduit 20mm including 6.00 Sq mm (Nominal Area) copper cable as earth continuity conductor after chasing in wall and making good the disturbed surfaces and white wash or existing colour , necessary junction box and covers including necessary connections, PVC flexible pipes are used in pannel board while connecting the cable complete all as specified and directed by Engineer - in - Charge. Note: chasing in wall should only by done by cutter
S&F in repairs Sheet metal enclouser for doble door Vertical DBs made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mouting VTPN 4 Way 415 Volt ISI marked 250Amps busbar stove enameled dust and vermin proof,IP 54, mechnical impact strength IK 09, cement spill protector suitable for incorporation FP MCCB(V-Tech) N1 Frame upto 125A ,Isolators and including give connection with wire and cable etc complete all as specified and directedby engineer -in-charge (Make - Indo Asian/Havells / Legrand)
S&F in repairs MCCB TP&N 63 Amps with breaking capcity 16kA ,Fixed TM and 415 volts AC Supply ISI marked complete all as specified and directed by Engineer - in - Charge. (Make -Indo Asian/Havells / Legrand)
S & F sheet metal enclosure for double door BDs made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted SP & N 8 ways, IP 54, mechnical impact strength IK 09, cement spill protector, 240 Volts, ISI marked 200 amps bus bar stove enameled dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed by Engineer - in - Charge. (Make - Havells / Legrand / Indo Asian)
S & F sheet metal enclosure for double door BDs made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted SP & N 12 ways, IP 54, mechnical impact strength IK 09, cement spill protector 240 Volts, ISI marked 200 amps bus bar stove enameled dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed by Engineer - in - Charge. (Make - Havells / Legrand / Indo Asian)
S & F in repair MCB ‘B’ series type suitable for 240 volts, AC supply 5 to 40 Amps , single pole with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge. (Make - Havells / Legrand / Indo Asian)
S & F in repair MCB ‘B’ series type suitable for 240 volts, AC supply 5 to 40 Amps, S P & N with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge. (Make - Havells / Legrand / Indo Asian)
M & L for Earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 Mtr deep below ground level ) with top edge of plate not less than 1.5 Mtr below ground level , connecting to GI earth lead 4 mm dia GI earth wire ,by means of bolts,nuts and washers of GI and protection by provision of GI medium grade pipe 15 mm bore including provision of concrete pit in PCC (1:2:4) type B1 using 20 mm grade stone aggregate with 40 mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 gs /Sqmm ) and frame of angle iron 25mmX25mmX6mm with lugs 02 Nos and with 6 mm dia MS bar handle made to shape ,GI light grade 20mm bore pipe for watering perforated at the bottom 1.75 meter long placed ontop edge of earth plate common salt and charcoal filling test point made out of 40 mmX 8 mm FI with fixing arrangement ,funnel, wire mesh and earth work inhard dense soil ,returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as per electric plate no.3 of SSR part 1 and connecting to earth test point all as specified and directed by Engr -In - Charge
Excavation in trenches n. exc 1.5 mtr wide and n exc1.5 mtr depth for laying of cables including taking up or down the LT cable and for foundation etc or for shafts wells cespits, manholes, pier holes complete all as specified and directed by Engineer - in - Charge
Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25cm complete all as specified and directed by Engineer - in - Charge
Removal of Excavated material n exceeding 50 mtr and depositing where directed complete all as specified and directed by Engineer - in - Charge
Supply and filling in Sand for Cable protection complete all as specified and directed by Engineer - in - Charge
Supply and lay standard size bricks subclass B type complete all as specified and directed by Engineer - in - Charge
Supply and lay jointing and testing and commissioning in replacement of 16 Sqmmx2 core XLPE insulated, screened , PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor & PVC sheathed LT cable 1100 V grade conforming to IS-7098 laid in trenches/ ducts/fixed on poles wall/laid under roads/paths/drain/culverts or passing through pipes complete all as specified and directed by engineer in charge.
Supply and lay jointing and testing and commissioning in replacement of 25 Sqmmx4 core XLPE insulated, screened , PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor & PVC sheathed LT cable 1100 V grade conforming to IS-7098 laid in trenches/ ducts/fixed on poles wall/laid under roads/paths/drain/culverts or passing through pipes complete all as specified and directed by engineer in charge.
S&F testing & commisioning of automatic electric hand dryer, meterial of ABS plastic, hand dry in less than 30 seconds, autocut off in 60 secand, motor speed 3700 RPM, 220V 50 Hz, blowing volume 120 m3/hour, power rating 1650 W, sensing range 20 cm+- 5 cm with dimension of 295 mm x 240 mm, 145 mm fitting in wall as connecaled complete all as specified and directed by Engr-in-Charge. Make : Euronics EH02 and equivalent
S&F rigid non metaliic PVC conduit 20mm dia inclusive of all tees, bends , elbows ,reducers , bell mouth tube ends and complete with all fixing accessories such as couplers , lock nuts, saddles, pipe hooks etc all as specified and directed by Engr-in-Charge.
S&F GI box flush mounted 100mmx100mmx100mm having holes for 20mm conduit entry includinig 2 Pin TV socket outlet flush type duly marked with symbol of TV and 3mm thick plastic laminated sheet cover complete for TV connection all as specified and directed by Engr-in-Charge.
S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star, rated with brushless direct current motor (BLDC) complete all as specifed and directed by Engr-in-Charge.
S&F metel body exhaust fan made of sturdy engineering plastic of 300mm sweep ,240 volt, complete with louvers and shutter and mounted in suitable opening arrangement in wall and connecting up including 3 core PVC insulated PVC sheathed copper conductor flexible cable 24/0.2mm from ceiling rose to fan complete including breaking of brick wall and making a hole for fixing of exhaust fan including grouting of bolts and making good to distubed wall in cement mortar (1 :4) white washing matching with existing colour etc. (Make : Havells/Orient/Crompton)
S&F exhaust fan made of heavy duty, metal body of 450mm sweep ,240 volt, complete with louvers and shutter and mounted in suitable opening arrangement in wall and connecting up including 3 core PVC insulated PVC sheathed copper conductor flexible cable 24/0.2mm from ceiling rose to fan complete including breaking of brick wall and making a hole for fixing of exhaust fan including grouting of bolts and making good to distubed wall in cement mortar (1 :4) white washing matching with existing colour etc. (Make : Havells/Orient/Crompton)
S&F exhaust fan made of heavy duty, metal body of 300mm sweep ,240 volt, complete with louvers and shutter and mounted in suitable opening arrangement in wall and connecting up including 3 core PVC insulated PVC sheathed copper conductor flexible cable 24/0.2mm from ceiling rose to fan complete including breaking of brick wall and making a hole for fixing of exhaust fan including grouting of bolts and making good to distubed wall in cement mortar (1 :4) white washing matching with existing colour etc. (Make : Havells/Orient/Crompton)
Hanging only ceiling fan (M.D. supply) and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed by Engineer - in - Charge.
S&F TV socket outlet with metal flush box having holes for 20 mm conduit entry for TV cable complete all as specified and directed by Engineer - in - Charge.
Note : Notes : (i) Amount of credit for retrieved materials is mentioned in Sch 'A' Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline.
M/S KARNI CONSTRUCTION COMPANY
KHANNA CONSTRUCTIONS
Aggarwal brothers and company
AYUSH BUILDERS
M/S BUDHRAM BISHNOI
G.S.CONSTRUCATIONS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .