Solid Waste Managament Under Swach Bharat Mission II At Uplat , Taluka - Talasari Dist - Palghar.

Item No.1 :- Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc.complete.(Lift upto 3.00 m.) By Manual Mean

Item No.2 :- Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag,plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Item No.3 :-Providing second class Burnt Brick masonry with conventional / I.S.type bricks in cement mortar 1:6 in plinth as backing in composite masonry including bailing out water manually, striking joints, raking out joints and watering etc Complete.

Item No.4 :-Providing internal cement plaster 12 mm thick in single coat in cement mortar1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc.complete.

Item No.5 :- Providing structural steel work in single stanchions composed of RSJ, channel,etc. with caps, bases, mild steel plates, angles, brackets, cleats, gusset plates,anchor bolts, etc. as per detailed designand

Item No.7 :-Providing and fixing corrugated galvanised iron sheets of 0.63 mm thick (24B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts ,lead and bitumen washers as per drawing etc. complete.(Weight of 5.5 Kilogram/sq.m.)

Item No.8 :-Providing and applying two coats of synthetic enamel paint of approved colour to new/old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete

Item No.1 :- Providing and fixing crime with GI mesh and size 20mmx20mm 10 guege to iron angle frame including welding crimp mesh to angle frame and steel flat, fixing the frame in its original position and oil painting extr. complete(excluding cost of structural steel ).

Item No.1 :-Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means

Item No.2 :-Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.

Item No.3 :- Providing and laying insitu, following grades of C.C. of trap /granite /quartzite /gneiss metal for foundation and bedding including dewatering, formwork, compacting and curing, finishing, etc. complete.)

Item No.4 :-Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually , striking joints on un exposed faces and watering etc.complete.

Item No.5 :-Providing and fixinginposition TMT-FE-500barreinforcementofvariousdiameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels,chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings andschedules. including cutting,bending,hookingthebars,binding with wires or tack welding and supporting as required complete.

Item No.6 :-Filling in plinth and floors murum bedding intrenches with approved murum fromexcavated materials from foundation in 15cm to 20 cm layers including watering andcompaction, etc. complete.

Item No.7 :- Providing and laying insitu, following grades of C.C. of trap /granite /quartzite /gneiss metal for foundation and bedding including dewatering, formwork, compacting and curing, finishing, etc. complete.

Item No.8 :-Providing second class Burnt Brick masonry with conventional / I.S.type bricks in cement mortar 1:6 in super structure including striking joints, raking out joints, watering and scaffolding etc. Complete

Item No.9 :-Providing internal cement plaster 20 mm . Thick in Single coats in cement mortar 1:3 with out neeru finish ,to concrete ,brick surface ,in all positions including scaffolding and curing etc. complete.

Item No.10 :-Providing and laying cement concrete flooring 50 mm thick with M15 cement concrete laid to proper level and slope in alternate bays including compaction filling joints, marking lines to give the appearance of tiles of 30cm x 30cm or other size laid diagonally/ square etc finishing smooth (with extra cement) in any colour as directed and curing etc. complete.with Crushed sand VSI Grade

Item No.11 :- Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scafflding if necessary, cleaning and preparing the surface, watering for two days etc. complete.

Item No.12 :- Providing structural steel work in single stanchions composed of RSJ, channel,etc. with caps, bases, mild steel plates, angles, brackets, cleats, gusset plates,anchor bolts, etc. as per detailed designand drawing or as directed by Engineerincharge including cutting, fabrication,hoisting, erecting, fixing in position, makingriveted / bolted / welded connections and one coat of anticorrosive paint and over it two coats of oil painting, etc. omplete. (Bd-C-6/277)

Item No.14 :- Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle sectionfitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fastarrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape withsquare bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices includingmechanical gear operation arrangement consisting of worm gear wheels and worms ofhigh grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (Without mechanical gear)

(A) Rubble

(B) Sand