Balance work for C/O Govt Senior Secondary School Building at Rei in GP Rei

Providing and fixing mild steel channel frame for doors/windows manufactured from mild steel channel section (ISLC) 75 × 40 × 6 mm and mild steel flat 40 × 12 mm, mitred & welded, fixed in position with anchor fasteners/hold‑fasts, including cutting to required length, hoisting, lead & lift to all levels, loading/un‑loading, surface preparation (removal of rust, scale, oil etc.), application of one coat of approved rust‑inhibitive metal primer on cleaned steel, making good adjoining surfaces and finishes etc., complete as per HPPWD specification, approved Drawings, design to the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt..

Providing and fixing at all levels mild steel channel frames for doors, windows & ventilators manufactured from MS channel 125×50×6 mm and MS flat 125×4 mm, mitred & welded, including cutting, hoisting, lead & lift, loading/un‑loading, fixing with anchor bolts/hold‑fasts, surface preparation and application of one coat rust‑inhibitive metal primer, making good disturbed finishes, including all materials, labour, scaffolding, transport, lead & lift, all taxes, duties, levies etc., complete as per HPPWD specification, approved Drawings, design to the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt..

Providing and fixing M.S. Flat iron hold fast 40x3 (forty into three millimetre) 40Cm (forty centi metre) long including fixing to frame with 10mm (ten millimetre) dia bolts and nuts and wooden plugs and embeding in cement concrete 1:3:6 (one cement : three gradec stone : six aggrregate) 20mm (twenty millimetre) nominal size complete as per HPPWD specification, approved Drawings, design to the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt..

Providing wood work in frames of false celling partitions etc. sawn and put-up in position in 1st class Kail wood.The rate inclusive of GST, octri, royalty, malkana and all type of texes imposed by the Govt.complete as per HPPWD specification, approved Drawings, design to the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt..

Providing and fixing wooden plank ceiling with tongued and grooved jointing and wood screws (frame work and cover fillets to be measured and paid for separately) 1st class kail wood. The rate inclusive of GST, octri, royalty, malkana and all type of texes imposed by the Govt.complete as per HPPWD specification, approved Drawings, design to the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt..

Providing and fixing plain square edged cover fillets beading 40mm x 12 mm ( fourty millimetre into twelve millimetre) millimetre section with wood screw in ceiling and lining including metering at junction The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt.

Providing, supplying and fixing glazed shutters for doors, windows and clerestory windows, in 2nd class deodar wood of 35 mm thickness, incorporating double float glass panes (i.e., two clear float glass sheets of nominal 4 mm thickness each) with all glazing fully fixed in position; complete with ISI‑marked M.S. pressed butt hinges, bright finished of required size with necessary screws; including all materials, labour, hardware, glazing, handling, lead & lift, waste removal, cleaning and incidental works, fixed in positioncomplete as per HPPWD specification, approved Drawings, design to the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt..

Providing and fixing 40mm (forty milimeters) thick second class deodar wood wire gauge shutters using galvanized Mild steel wire gauge of IS (Indian Standred) gauge designation 85-G (Eighty five Gauge) with a wire of dia 0.56 (Zero decimal fifty sixmilimeters) for doors and windows and clerestory windows including bright finished black enameled iron hinges with necessary screws complete as per HPPWD specifications, approved Drawings,design, to the entire satisfaction and direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt.

Providing and fixing 35 mm thick factory-made flush door shutter, commercial grade on both sides, featuring a non-decorative phenol-bonded, termite-resistant, and boilng-water-proof core of blockboard construction. The shutters shall have a frame of first-class hardwood and be veneered with well-matched first-class Indian teak plywood, exhibiting vertical grains of cross bands and face veneers on one face, and commercial plywood on the other face. The work includes the supply and installation of black enamelled mild steel butt hinges with necessary screws, complete as per HPPWD Specifications, approved drawings, and design, and to the entire satisfaction and direction of the Engineer-in-Charge. The scope of work also includes hauling and carriage of materials to various locations by all modes of transportation, including all leads and lifts, and all incidental charges complete in all respects, The rate shall be inclusive of octroi, royalty, malkana, toll tax, sales tax, and all other taxes and levies imposed by the Government.

Providing and fixing M.S. grills of require pattern in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws. complete as per HPPWD specifications, approved Drawings,design, as per the entire satisfaction and direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt.

Providing and fixing 250x16 mm (two hundred fifty into sixteen millimetre) anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etcetra complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing 200 X 10 mm (two hundred into ten millimetre) aluminium tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetera complete 200 X 10 mm (two hundred into ten millimetre) including all taxes and carriage of materials within all leads, lifts as per specification and as per the direction of the Engineer-in-charge and other incidentals.

Providing and fixing 150 X 10 mm (one hundred fifty into ten millimetre) aluminium tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetera complete 200 X 10 mm (two hundred into ten millimetre) including all taxes and carriage of materials within all leads, lifts as per specification and as per the direction of the Engineer-in-charge and other incidentals.

Providing and fixing 125 mm (one hundred twenty five millimetre) aluminium handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete including all taxes and carriage of materials within all leads, lifts complete as per HPPWD specification, approved Drawings, design to the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt..

Providing and fixing 100mm (one hundred millimetre) aluminium handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete including all taxes and carriage of materials within all leads, lifts as per specification and as per the direction of the Engineer-in-charge and other incidentals.

Providing and fixing 150mm oxidized M.S. single acting spring hinges with necessary screws etc. complete as per HPPWD specification and directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing 150mm (one hundered fifty millimeter) oxidized M.S. double acting spring hinges with necessary screws etc. complete as per HPPWD specification and directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing 100mm (one hundered millimeter) bright finished hard drawn hooks and eyes.complete as per HPPWD specification and directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing 150mm bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete as per HPPWD specification and directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)complete as per HPPWD specification, approved Drawings, design to the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt..

Providing and fixing Garsa (Kullu) stone slab 12.5mm.cladding on R.C.C.surface side as on faces of Arch masonry walls etc.on 12mm. Thick cement plaster 1:3(1cement:3sand) and jointed with cement slurry i/c scaffolding etc. complete as per HPPWD specification, approved Drawings, design to the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt..

Providing and fixing 2mm (two milimetre) thick PVC antistaic Venyl flooring plain or coloured, carbed or mosaic/metalled finish laid with approved adhesive on sub floor (damp proof treatment to be paid for separately). as per HPPWD specifications,approved Drawing,design to the entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing glass strips in joints of cement concrete flooring and terrazo flooring etc.The rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.. complete as per HPPWD specification, approved Drawings, design to the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt..

Providing and Laying thick cement concrete flooring in1:2:4(one cement two sand four garded stone agrreagate forty milimetre) nominal size laid in one layer finished with a floating coat of neat cement including carriage of material within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals. The rate including of octroi, royality, Malkana, toll tax, Sale tax,GST or other taxes imposed by the government.

Providing and laying 20mm thick kota stone flooring thick base of cement mortar 1:4 (One cement isto Four Sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete, as per specification, approved drawing, design, to the entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 10 mm thick acid and/or alkali resistant tiles In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand)of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge.The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. The rate inclusive of GST,octri,royalty,malkana and all type of taxes imposed by the Govt.

White glazed tiles 6mm (Six millimetre) thick in flooring, treads and steps and landing laid over 12mm (Twelve millimetre) thick cement mortar 1:3 (1cement :3 sand ) and jointed with cement slury complete as per HPPWD specifications, approved Drawings,design, to the entire satisfaction and direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt.

Providing and Laying Chequerred precast cement concrete tiles 22mm thick in ramp jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete ,on 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) complete as per HPPWD specification, approved Drawings, design to the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt..

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per HPPWD specification, approved Drawings, design to the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt..

Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete as per HPPWD Specification within all leads and lifts and as per the direction of the Engineer-in -charge and other incidentals.complete as per HPPWD specification, approved Drawings, design to the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt..

Providing and laying mechanically mixed and vibrated cement concrete 1:6:12 (one cement isto six sand isto twelve graded crushed stone aggregate 40 mm (forty millimetre) nominal size) and curing complete excluding cost of centring and shuttering in foundation and plinth including all taxes,GST, carriage of material, within all leads and lifts within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals.

Structural steel work, riveted, bolted, or welded in built-up sections, trusses, and framed work, including cutting, hoisting, fixing in position, and applying a priming coat of approved steel primer, complete as per HPPWD specifications, approved drawings, and design, and to the entire satisfaction and direction of the Engineer-in-Charge. The work shall also include hauling and carriage of materials to various locations by all modes of transportation, including all leads and lifts, and all incidental charges complete in all respects. The rate shall be inclusive of GST, octroi, royalty, malkana, toll tax, sales tax, and all other taxes and levies imposed by the Government

Providing and laying mechanically mixed and vibrated plain cement concrete 1:3:6 (one cement isto three sand isto six graded crushed stone agreegate 40 mm (forty millimetre) nominal size) curing complete excluding the cost of form work in foudation and plinth including all taxes, GST, carriage of material, within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals.

Providing and fixing handrails of G.I. pipes approved size by welding, etc., to steel ladders, balcony railings, staircase railings, and similar works, including applying a priming coat of approved steel primer, complete as per HPPWD specifications, approved drawings, and design, and to the entire satisfaction and direction of the Engineer-in-Charge. The work shall also include hauling and carriage of materials to various locations by all modes of transportation, including all leads and lifts, and all incidental charges complete in all respects. The rate shall be inclusive of GST, octroi, royalty, malkana, toll tax, sales tax, and all other taxes and levies imposed by the Government.

Providing and fixing second class deodar wood 75mm x 60mm (Seventy five millimetre into sixty millimetre) rounded hand rails in straight length complete in all respect including carriage of material within all leads and lifts as per the direction of the Engineer-in-charge, other incidentals and as per Architectural drawing and design complete. The rate including of octroi, royality, Malkana, toll tax, Sale tax,GST or other taxes imposed by the government.

Providing and fixing 0.60mm (zero decimal six zero millimetre) thick prepainted steel sheet and approve make in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 micron over 5 micron primer coating and back coat of polyster of 5 micron over 5 micron primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) dia and prepainted G.I. limpet and rubber washer complete with all accessories as required within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals.

Providing and fixing ridge or hips 60cm (zero point sixty millimetre)overall with 60 mm (sixty milimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 micron over 5 micron primer coating and back coat of polyster of 5 micron over 5 micron primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) dia and prepainted G.I. limpet and rubber washer complete with all accessories as required within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals.

Steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint In beams tees, flats complete as per HPPWD specifications, approved Drawings,design, as per the entire satisfaction and direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt.

Providing and fixing M.S. B.P. sheet 1.66mm (one point six six millimetre) to 2mm (two millimetre) thick in eaves board / facia / soffits / ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured and paid separtely) including carriage of material within all leads and lifts and other incidentals.

Providing and fixing in position collapsible steel shutters with vertical channels 20 mm X10 mmX2mm (twenty into ten into two millimeter) and braced with flat iron diagonals 20 mm X5 mm (twenty into five millimeter) size with top and bottom rails of T.iron 40 mm X40 mmX6 mm (forty into forty into six millimeter) with 38 mm (thirty eight millimeter) dia steel pulley complete with bolts and nuts locking arrangements, stoppers, handles,including applying a priming coat of red lead paint including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge.

Applying Birla white wall care putty over plastered surface after thoroughly brushing the surface free from mortar drops, dust loose materials and other foreign matter sand papered smooth to give final matter finish to the surface complete as per HPPWD specifications, approved Drawings,design, as per the entire satisfaction and direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt.

Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture and of required shade on un-decorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar dropping and other foreign matter and including preparing the surface even and sand papered smooth as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Providing and applying waterproofing cement paint of required shade on new work walls, including thorough surface preparation by brushing to remove all dirt, loose material, mortar drops, and foreign matter, ensuring a clean and dry surface. The paint shall be applied in two or more coats at the rate of 3.84 kg per 10 sqm as per IS 5410-1969, using an approved brand and manufacture. The application shall be done with a brush having stiff bristles, ensuring uniform thickness and free from excessively heavy brush marks. The finished surface shall be even and uniform in shade, without patches, brush marks, or paint drops. The work includes all materials, labour, equipment, scaffolding, lead and lift to all levels, loading/unloading, transport, and all taxes, duties, and levies, complete as per approved drawings, HPPWD specifications, and the direction of the Engineer-in-Charge

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives Complete as per HPPWD specifications, as per the entire satisfaction and direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST, octri, royalty, malkana and all type of texes imposed by the Govt.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: complete as per HPPWD specifications, as per the entire satisfaction and direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST, octri, royalty, malkana and all type of texes imposed by the Govt.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting. Ready mixed paint brushing with white lead for priming wood primer. as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.

Painting two coats (excluding priming coat) on new wood and wood based surfaces with ready mixed paint brushing to give an even shade including cleaning of all dirt, dust and other foreign matter sand papering and stopping with ready mixed paint white.as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.

Providing and laying 75 mm thick compacted bed of dry brick aggregate of 40 mm thick nominal size including spreading, well ramming, consolidating and grouting with Sand, including finishing smooth etc. complete as per direction of Engineer-in-charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of taxes imposed by the Govt.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of taxes imposed by the Govt.

Constructing Course rubble hammer dressed 'U' shape open surface drain with side walls. 15x22 (Fifteen into twenty two centimetre) in cement mortar 1:6 (one Cement : six Sand) and inside plastring with cement plaster 1:3 (one Cement: three Sand) including earth work and laying 10 cm (ten centimetre) cement concrete in 1:5:10 (one Cement :five Sand : ten graded stone aggregate) of 40 mm (forty millimetre) nominal size and 7.5 cm (seven point five) cement concrete 1:2:4 (one Cement : two sand : four Graded stone aggregate of 20 mm (twenty millimetre) nominal size) and finished with a floating coat of neat cement complete as per standard design. to the entire satisfaction and direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt.

Painting two costs (excluding priming cost on new steel and other metal surfaces eith enamel paint brushin to give an even shade including cleaning the surface of all dirt,dust as per HPPWD specifications, approved Drawings,design, as per the entire satisfaction and direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt.

Providing and fixing 12mm thick (twelve milimeter) thick green chalk board (Non Magnetic) with superior quality framing specially ozodized aluminum profile 20x15mm (twenty into fifteen milimeter) with corner of black surface shall be non porous ceramic particles on the top green surface of smooth writing with chalk over 11mm (eleven milimeter) thick particle board which approx. The board shall be fixed on the wall with specially desigend J clamps and square clamps with the help nylon sleves and screw as per the site requirement complete in all respect as per drawing including carriage of all labour equipement and materials to various location through all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing 19mm (ninteen milimetre) thick commercial board water proof shutters for CB including fixing with piano hinges with screws complete. as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt..

Providing and fixing 90cm high railing with MS hollow rectangular size 5x7.5cm with 20x20mm MS square bar balluster at 30cm centre to centre welded with MS flat 40x6mm in side to MS lugs of 20mm square bar at lower end embeded in RCC surfaces included applying priming coat complete as per HPPWD specifications, approved Drawings,design, as per the entire satisfaction and direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt.

Earth work in excavation by mechanical means Ordinary rock (hydraulic excavator) / manual means over areas exceeding 30 cm in depth, 1.5 m in width as well as 10 m² on plan, including getting out and disposal of excavated earth up to all lead(s) and lift(s) as directed by the Engineer‑in‑charge. Work to be executed in accordance with Himachal Pradesh Public Works Department (HPPWD) specifications, approved drawings & design, complete in all respects including all hauling/carriage of materials to various locations through all modes of transportation within specified leads and lifts, inclusive of all incidental works. Rate inclusive of GST, octroi, royalty, malkana and all types of taxes imposed by the Government

Providing and Laying Mechanically mixed and vibrated concrete for plain/reinforced concrete nominal mix 1:4:8 ( one cement is to four sand is to eight graded crushed stone aggregate 40 millimeter (forty millimeter) nominal size in or under water and curing complete for 14 (fourteen) days, in open foundation for all type of structures as in Retaining wall, Breast walls, Abutments toe walls and the like including pumping or bailing out water (surface and sub soil water) dewatering for all depths and any quantum of water including removal of slush which may arise at the time of laying under water complete for all heights/depths including the cost of form work complete as per approved Drawings,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt..

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimeters) thick, welded with angle iron in frames of 30mmx30mmx5mm (Thirty millimetre into Thirty millimetre into Five millimeters),so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Vertical surface such as walls (any thickness) partitions and the like including attached pillasters buttress plinth and string courses and the like as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimeters) thick, welded with angle iron in frames of 30mmx30mmx5mm (Thirty millimetre into Thirty millimetre into Five millimeters),so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs, landings and the like floor etc; within all leads, lifts of materials and other incidentals.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimeters) thick, welded with angle iron in frames of 30mmx30mmx5mm (Thirty millimetre into Thirty millimetre into Five millimeters),so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Edges of slab and break in floors and walls under 20cm wide as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals.

Providing and laying cement concrete work 1:2:4 (one cement : two sand : three graded stone aggregate 20 mm(Twenty milimetre) nominal size) and curing camplete excluding cost of form work and reinforcement for reinforced concrete work in wall any thickness but not less than 0.10 mtr. including attatched pilaster and string course from top of foundation upto floor two. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt.

Providing and laying cement concrete work 1:2:4 (one cement : two sand : three graded stone aggregate 20 mm(Twenty milimetre) nominal size) and curing camplete excluding cost of form work and reinforcement for reinforced concrete work in floor roof landing and shelves and their support balconies beam, girder bressumer . The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt.

Providing mild steel/tor steel reinforcement for RCC work including bending, binding and placing in position complete as per HPPWD specifications, approved Drawing,design, as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt..

Providing and fixing cast iron cover without frame 455x610mm having weight not less than 23kg as per HPPWD specifications,approved Drawing,design to the entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing 20x20mm square bar M.S foot rest i/e fixing in manhole with 200x200x100mm cement concrete 1:3:6 stone aggregate 20mm nominal size complete as per HPPWD specifications, approved Drawings,design, as per the entire satisfaction and direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt.

Brick work using common burnt clay second class building bricks in cement mortar 1:6 (one cement : six sand) in foundation and plinth up to floor all levels including curing complete as per HPPWD specifications, approved Drawings,design, as per the entire satisfaction and direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt.

Supplying and filling broken /crushed stone/bricks bats of hard stone of 40mm size in soak pit as per approved drawing , design and specification complete as per HPPWD specifications, approved Drawings,design, as per the entire satisfaction and direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating, and dressing complete, as per HPPWD specifications, approved drawings, and design, and to the entire satisfaction and direction of the Engineer-in-Charge. The work shall also include hauling and carriage of materials to various locations by all modes of transportation, including all leads and lifts, and all incidental charges complete in all respects. The rate shall be inclusive of GST, octroi, royalty, malkana, toll tax, sales tax, and all other taxes and levies imposed by the Government.

15mm(fifteen milimetre) cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and/or rounded angles no exceeding 80mm in girth and finished even and smooth in cement mortar 1:6 ( one cement : six sand) above floor two level to three level as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.

Providing and fixing 110mm (One Hundered ten milimeter) dia. PVC cowl for ventilating pipe ISI marked including fixing with approved adhesive complete. The rate inclusive of GST,octri,royalty,malkana and all type of taxes

Providing and fixing 110mm dia. High pressure PVC Spihot and socket, waste and ventilating pipe 4.00 to 6.00 mm thick including fixing with approved adhesive complete.as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) PN - 16 Pipe, 20mm OD (SDR-7.4) PN pipes confirming to IS 15801, UV stabilized & anti- microbial fusion welded, having thermal stability for hot & cold water supply, including all PP- R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.

Providing and fixing 3 layer PP-R (Poly propylene Random PN - 16 Pipe, 25mm OD (SDR-7.4 pipes confirming to IS 15801, UV stabilized & anti- microbial fusion welded, having thermal stability for hot & cold water supply, including all PP- R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes PN - 16 Pipe, 20mm OD (SDR-7.4 confirming to IS:15801UV stabilized & anti- microbial fusion welded, having thermal stability forhot&coldwater supply, including all PP- R plain & brass threaded polypropylene randomfittings, including trenching, refilling & testingof joints complete as per direction of Engineer-in-Charge. External exposed on wall

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes PN - 16 Pipe, 25 mm OD (SDR-7.4) confirming to IS:15801UV stabilized & anti- microbial fusion welded, having thermal stability forhot&coldwater supply, including all PP- R plain & brass threaded polypropylene randomfittings, including trenching, refilling & testingof joints complete as per direction of Engineer-in-Charge. External exposed on wall

Providing and fixing vitrious China wash down water closet (European Type W.C pan) with internal Por S trap including jointing and trap with soil pipe in cement mortar 1:1 (one cement one Sand) seat and cover to be measured and paid seperatly Angle Indian Univerasl Cera or its equivalent. Uniuresal Pan No 2071 (58x44 cm) Snow White shade. as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of taxes imposed by the Govt.

Providing and fixing vitrious china water closet squatting pan Indian type W.C pan size 580 mm (Earth work, bed concretee foot rest and trap to be measured and paid for seperatly. (orrisa pattern) Crea or Hindware or its equivalent. Universal Pan NO 2061(57X46)Snow white shade. as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of taxes imposed by the Govt..

Providing and fixing plastic seat (solid/hollow) and cover for water closet for with CP brass hings and rubber buffers solid type white plastic seat and cover. as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of taxes imposed by the Govt..

Providing and fixing the Jaquar ALD-CHR-573 Health Faucet Kit, comprising an 8 mm diameter chrome-plated hand jet, approximately 1.2 m flexible hose, and wall-mounted hook bracket, for installation at European-type W.C. locations, complete with all necessary fittings and fixings, executed as per drawings and to the satisfaction of the Engineer-in-Charge

Providing and fixing 100mm (One hundred millimetre) size P or S trap for water closet (squatting pan) including jointing the trap with the pan and sail pipe in cement mortar 1:1 ( 1 cement : 1 sand) sand cast iron complete as per HPPWD specifications, to the entire satisfaction and direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of taxes imposed by the Govt.

Providing and fixing 10/12.50 ltr (Twelve decimal five litre) vitreous china low level flushing cistern with a pair of C.I. or M.S. brackets complete with ball valve with as lead valve less siphon 15mm (Fifteen millimetre) nominal size brass ball valve with polythene float C.P. brass handles unions and couplings for connection with inlet and outlet and over flow pipes 40mm (Forty millimetre) dia CP flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (over flow) pipe to be measured and paid for separately. Cera ,Hindware and PariwareLow hard cistern with dual flushing system No. 2603 complete as per HPPWD specifications, to the entire satisfaction and direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of taxes imposed by the Govt.

Providing and fixing in position and clamps etc. 32mm nominal size internal diametergalvanized steel tube flush pipe for level flishing cistern connecting the flush pipe including fixing with approved adhesive upto all floor level as per HPPWD specification or as directed by the Engineer-in-charge ,including carriage of material within all leads and lifts and other incidentals.

Providing and fixing position brass mosquito proof coupliing for over flow pipe of 25mm (Twenty five millimetre) dia complete as per HPPWD specifications, to the entire satisfaction and direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt.

Providing and fixing GI inlet connection for flush pipe for WC pan complete as per HPPWD specifications, to the entire satisfaction and direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of taxes imposed by the Govt.

Providing and fixing vitreous China squatting plate pattern urinal of size 450x350mm. complete as per HPPWD specifications, approved Drawings,design, as per the entire satisfaction and direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt.

Providing and fixing C.P. brass flush pipe spreaders for urinal with fitting such as with unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required .The rate inclusive of GST,octri,royalty,malkana and all type of taxes imposed by the Govt.

Providing and fixing Division plate for urinals 600mm x 30mm (Six hundred into thirty millimeters) vitreous china. Cera Make.as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of taxes imposed by the Govt.

providing and fixing vitrous china wash basin with single hole for pillar tap with colar MS brackets painting white including cutting holes and making good the same. The rate inclusive of GST,octri,royalty,malkana and all type of taxes imposed by the Govt.

Providing and fixing CP Brass pillar tap with capstan head 15(fifteen)mm dia. Cera Make. as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of taxes imposed by the Govt.

Providing and fixing a C.P. (chrome‑plated) brass chain and rubber plug complete for sink or wash‑basin (32 mm diameter waste) as per the (HPPWD) specifications, approved drawings and design, and to the entire satisfaction and direction of the Engineer‑in‑Charge. The work shall include hauling and carriage of materials to various locations by all modes of transportation, including all leads and lifts, and all incidental charges complete in all respects. The rate shall be inclusive of Goods & Services Tax (GST), octroi, royalty, malkana, toll tax, sales tax and all other taxes and levies imposed by the Government

Providing and fixing 32mm ( thirty two millimetre) dia. M.I. union for wash basin or sink as per HPPWD specifications,approved Drawing,design to the entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 32mm ( thirty two millimetre) dia. CP brass waste pipe for wash basin or sink as per HPPWD specifications,approved Drawing,design to the entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 600mm and 450 mm (Six hundred into four hundred fifty millimetre) bevelled edge mirror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixed to wooden plugs with CP brass screws and washers. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt.

Providing and fixing CP towel rail with CP brass brackets fixed to wooden cleats with CP brass screw complete as per HPPWD specifications, approved Drawings,design, as per the entire satisfaction and direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt.

Providing and fixing soap dish with CP brass brackets fixed to wooden cleats with CP brass screw complete as per HPPWD specifications, approved Drawings,design, as per the entire satisfaction and direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt.

Providing and fixing C.P. brass bib cock of approved quality, conforming to IS:8931, complete as per HPPWD specifications, approved drawings, and design, and to the entire satisfaction and direction of the Engineer-in-Charge. The work shall also include hauling and carriage of materials to various locations by all modes of transportation, including all leads and lifts, and all incidental charges complete in all respects. The rate shall be inclusive of GST, octroi, royalty, malkana, toll tax, sales tax, and all other taxes and levies imposed by the Government

Providing and fixing C.P. brass stop cock (concealed) of standard design and approved make, conforming to IS:8931, complete as per HPPWD specifications, approved drawings, and design, and to the entire satisfaction and direction of the Engineer-in-Charge. The work shall also include hauling and carriage of materials to various locations by all modes of transportation, including all leads and lifts, and all incidental charges complete in all respects. The rate shall be inclusive of GST, octroi, royalty, malkana, toll tax, sales tax, and all other taxes and levies imposed by the Government.

Providing and placing on terrace (at all floor levels) Sintex -make water storage tank, IS:12701 marked, with cover and suitable locking arrangement, making necessary holes for inlet, outlet, and overflow pipes, but excluding fittings and base support for the tank, complete as per HPPWD specifications, approved drawings, and design, and to the entire satisfaction and direction of the Engineer-in-Charge. The work shall also include hauling and carriage of materials to various locations by all modes of transportation, including all leads and lifts, and all incidental charges complete in all respects. The rate shall be inclusive of GST, octroi, royalty, malkana, toll tax, sales tax, and all other taxes and levies imposed by the Government.

Providing and fixing angle valve 15mm (Fifteen millimetre) dia. complete as per HPPWD specifications, approved Drawings,design, as per the entire satisfaction and direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt.

Providing and fixing ISI marked 110 mm(one hundred ten millimetre) dia PVC floor trap of self cleaning complete cost of cutting making the walls and floors etc. complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing 110mm (One Hundered ten milimeter) dia. high pressure PVC spigot and socket waste and ventilating pipes ISI marked including fixing with approved adhesive complete. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt.

Providing and fixing 75 mm (seventy five) dia. high pressure PVC spigot and socket waste and ventilating pipes ISI marked including fixing with approved adhesive complete. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt.

Providing and fixing ISI marked PVC single equal branch 110 mm (one hundred ten millimetre) dia. with oval access door insertionrubber washer 3mm (three milimeter) thick bolt and nut complete as per HPPWD specification and directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing ISI marked PVC single equal branch 75mm dia. with oval access door insertion rubber washer 3mm (three milimeter) thick bolt and nut complete as per HPPWD specification and directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing ISI marked 100 mm (one hundred millimetre) nominal bore/diameter with oval access door, insertion rubber washer 3 mm thick bolts and nuts complete as per HPPWD specification and directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing ISI marked 75 mm (seventy five millimetre) nominal bore/diameter with oval access door, insertion rubber washer 3 mm thick bolts and nuts complete as per HPPWD specification and directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing 110mm (one hundered ten millimeter) collar nominal diameter complete upto. including fixing with approved adhesive and carriage of material within all leads and lifts complete as per HPPWD specifications, approved Drawings,design, as per the entire satisfaction and direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt.

Providing and fixing 75mm (seventy five millimeter) collar nominal diameter complete as per HPPWD specifications, approved Drawings,design, as per the entire satisfaction and direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt.

Providing and fixing 100mm (One hundred millimetre) nominal size Plain bend including fixing with approved adhesive etc complete as per HPPWD specifications, approved Drawings,design, as per the entire satisfaction and direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt.

Providing and fixing 75mm nominal size Plain bend including fixing with approved adhesive etc complete as per HPPWD specifications, approved Drawings,design, as per the entire satisfaction and direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt.

Providing and fixing 100mm nominal size PVC double equal branch of required degree with oval access door insertion rubber, washer, 3mm thick bolts and nuts complete i/c fixing with approved adhesive etc complete as per HPPWD specifications, approved Drawings,design, as per the entire satisfaction and direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt.

Providing and fixing 75mm dia. PVC Double equal branch with oval door access door, insertion rubber washer 3 mm thick, bolts and nuts complete. as per HPPWD specifications, approved Drawings,design, as per the entire satisfaction and direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt.