WELCOME MAINT TO OFFR MD ACCN AT NIWARU MIL STN JAIPUR

Amount

M&L for preparation of complete removal of old decorated surfaces of wall (plastered or unplastered) including cornices pillasters and other wall features by brooming down smoke, soot moulds and efflorescent salt and trading oil or greasy spots applying one coat of white wash to obtain uniform surfaces including scafolding arrangement, trestles, ladders etc, complete all as specified and directed by Engineer-in-charge

All as per Srl No. 1 above but one coat of white wash on ceiling.

M&L for preparing of old decorated surfaces of (Plastered or unplastered) including cornices pillasters and other wall features by washing, rubbing down and stopping of distmpered and painted surfaces of walls and applying one coat of oil Bound distemper white or tinted after filling of any depression by wall care putty including scaffolding arrangement, trestles, ladders etc and cleaning of furniture and floors , doors/ windows, complete all as specified and directed by Engineer-in-charge

M&L for prepration of newly plastered surface and applying two coats of oil bound distemper over birla wall care putty of approved tinot upto two storey building, complete all as specified and directed by Engineer-in-charge

M&L for 3 mm thick birla wall care putty on the existing decorated/undecorated wall/ceiling surfaces and to make the surface even and smooth , complete all as specified and directed by Engineer-in-Charge.

Complete removal of existing treatment of old decorated plastered surfaces and applying two coats of oil bound distemper over wall care putty of approved tint upto two storey building, complete all as specified and directed by Engineer-in-Charge.

M&L for preparing of old paianted surfaces of wood or wood based materials of any descriptionover 10 cm width or girth and applying one coat of synethic enamel paint on wooden surfaces all as specified and directed by Engineer-in-Charge.

All as per Srl No. 7 above but one coat of Paint on steel surfaces.

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc (in small patches and different location also) all as directed by Engineer-in -charge .

M&L for rendering 10 mm thick in cement mortar 1:4 on brick masonry /concrete surfaces of walls including finished fair & even (in small patches and different location also), complete all as specified and directed by Engr-in-charge.

Dismantling and taking up or down the existing unserviceable GI pipe and M&L for new galvanised steel water tubing medium grade with all fittings and fixed complete to wall and ceilings or laid in floors of following sizes:-

15 mm bore

20 mm bore

S&F Rotational moulded polythene water storage tanks 3 layer white colour (cylindered vertical closed top ) hoisted and fixed in position including necessary connection nipple suitable for inlet, outlet and overflow pipes, all as specified in SSR Part –I of capacity of tanks 500 ltrs and including dismantling of existing unserviceable water tanks and remove from site, , complete all as specified and directed by Engr-in-charge. Make . Polycon/ syntex/Mehaai Polymers (Brand Polysafe) etc

All as per Srl No. 12 above but 1000 Ltrs capacity.

Supply and fixed in repair 25mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule , complete all as specified and directed by Engr-in-charge.

Cleaning and removing all scale and dirt, etc. from tanks of capacity 250 lt to 500 lt and form mouths of circulating pipes, etc incl disconnecting and refixing after cleaning, complete all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, all as specified and directed by Engineer-in-Charge.

M&L light shade Vetrified Ceramic tiles edge cut 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick plaster in CM (1:6) finished fair and even, complete all as specified and as directed by Engr-in-Charge.

M&L Coloured Non Skid ceramic tiles 7 to 8mm thick edge cut/ joint free (squares/ rectangular) area of each tile exc. 0.11 sqm but not exc. 0.18 sqm, in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6) or tile addessive , complete all as specified and as directed by Engr-in-Charge.

M&L Coloured glazed designer ceramic tiles 300X450X7 to 8mm thick on vertical surface as in dado/skirting and jointed in neat cement slury and pointed with white/colour cement to match with the surface over 10 mm thick rendering in CM 1:4, all as specified and directed by Engineer-in-Charge.

Taking down and refixing the shutter in the same opening of area exc 1 Sqm and nexc 2 sqm (including rescuring or easing and adjusting steel/Flush/Panelled shutter) all as directed by Engineer-in -charge .

S &F in repair 15 mm bore pillar taps fancy cast copper alloy fancy type chromium plated screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes, complete all as specified and directed by Engr-in-charge.

S &F in repair 15 mm bore fancy stop valve/angle valve fancy type chromium plated cast copper alloy screwed down high pressure screwed both ends for iron pipe or for union, complete all as specified and directed by Engr-in-charge.

Description all as item as above here-in-before but stop valve 15 mm concealed type chromium plated, complete all as specified and directed by Engr-in-charge.

S&F in repair viterous china wash down water closet pan (Pedestal Pattern)white excluding flushing cistern and flush pipe including connection to out going pipe and flushing pipe and including PVC sheet cover, complete all as specified and directed by Engr-in-charge.

S&F plastic water closet seat cover, whiteclosed patter with flat bottom and cover and mild steel chromium plated or aluminized hinging device , all as directed by Engineer-in- Charge.

S&F in repair PVC low level flushing, cistern valve less Symphonic action type 10 Litre cap with inlet vlave, float and handle incl bracket , complete all as specified and directed by Engineer-in-charge

S&F rep 15 mm bore brass chromium plated wall/basin mixer hot & cold water screwed down for iron pipe & fixed , complete all as specified and directed by Engr-in-charge.

M&L Granite (of any type) work (table rubbed and polished) 18 to 20 mm thick in risers & treads of steps, jambs, pillars, window cills,cooking platforms and similar works over & including10 mm thick screed bed (bedding layer) in CM 1:4, pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of Granite including cutting and polishing (half mirror polish i.e. half granite polish as per local trade practice) , complete all as specified and as directed by Engr-in-Charge.

S & F in repair 4 mm thick Sheet glass, ordinary quality and glazing with oil putty/rubber gasket in square exc 0.5 sq.m in each pane, complete all as specified and as directed by Engr-in-Charge.

S&F in repairs Vitreous China wash hand basin (with leg), flat back basin; any coloured, size 610X560 mm including CP waste coupling & taps, waste chain & plug. Complete all as specified and directed.

J.J.ENGINEERING

Shiv Construction Company

Stuti Trading Company

C.P.Computers

M/S JALANDRA CONSTRUCTIONS

M S GROUP

DIVYA ASSOCIATES