REPAIR REPLACEMENT OF DOOR, WINDOW, VENTILATORS, FALSE CEILING AND CERTAIN BUILDING WORKS INSIDE TECHNICAL AREA DMSRDE KANPUR UNDER GE I R AND KANPUR

Amount

Taking down chowkhats of frames (wooden / aluminium) with shutters without taking off shutters from the frame area exceeding 1.5 Sqm but not exceeding 4.00 Sqm each complete all as specified and directed.

S&F 35mm flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 2nd class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

Taking down wooden cupboard / Aluminium partition wall any description not exceeding 1 Sqm each panel complete all as specified and directed of frames with shutters (with out taking off shutters from the frame) area exceeding 1.5 Sqm but not exceeding 4.00 Sqm each complete all as specified and directed.

S&F fully glazed cupboard with openable shutter having powder coated aluminium section of size 44.45 x 44.45 x 2mm thick for frame and section for shutter 45 x 25 x 1.5mm thick & 4.8mm thick plain/figured /tinted glass sheet with necessary jointing cleats, glazing clips, rubber packing, aluminium and rubber beading, mortice lock of brass of size 65mm, vertical type four levers, aluminium hinges of size 75mm, 125mm long aluminium handle fabricated type including proper fixing of aluminium frame with screw and PVC gully of adequate size as per requirement of site complete all as specified and directed. (Note Colour of powder coating and glass will be approved by GE).

S&F 15 micron natural colour having powder coated aluminium section partations partly glazed partly paralled area of each panel not exceeding one sqm with section 38mm x 63.5mm x 1.50mm including necessary joints cleats, glazed clips rubber packing screw & 4.8mm thick plain/tinted glass two numbers upper panel and 12mm thick prelaminated particle board BWA type molamine finish (both side) on bottom panel (0.80mm height) including necessary fittings etc complete all as specified and directed. (Colour of glass shall be approved by GE(I) R&D Kanpur

Taking down chowkats or frame with shutter without taking off shutter from the frame area not exceeding 1.5 sqm each complete all as specified and directed.

S&F 15 micron natural coloured having powder coated aluminium section door frame 115 mm x 44.50 mm x 2.0 mm with top rail, bottom and lock rail and stiles 85mm x 44.45 mm x 1.5 mm including aluminium snap beading of size 19.05 mm x 17.27 mm necessary jointing cleats, glazing clips, rubber packing, screw and 4.8mm thick plain/figured glass on panels including necessary fittings such as American type handle 200 mm size including floor spring (ISI mark) locking arrangement (mortice lock), 03 hinges of size 125mm aluminium anodised medium grade in each complete all as specified and directed. (Colour of glass shall be approved by GE).

S&F in repair door closer hydraulically regulated (aluminium die cast) designation No. 3 universal type suitable for door shutter of 851 to 1000mm width and of wt between 61 to 80 Kg complete all as specified and directed.

Dismantling of ceiling boards and wall (fibre, insulation, etc or perforates/insulation boards) any thickness, including cover fillets & Snap Grid complete all as specified and directed

Providing & fixing false ceiling at all heights with sleek Grid and semi perforated 12mm thick micro tegular edged GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15 x 32 mm of length 3000mm, cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanized @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.

M&L in repair 9mm thick PVC laminated Gypsum board in ceiling fixed with srews as per manufacturer instructions for any height including taking down complete all as specified and directed.

Resecuring or easing & adjusting without taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finish even and fair with out using extra cement including taking down of existing old plaster complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls including cornices plaster etc and applying two coats of oil bound distemper complete all as specified and directed.

M&L for 1mm thick birla wall care white putty or JK White wall care putty on new or old surfaces complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surface of ceiling in cement mortar 1:4 including 10mm dubbing coat in cement mortar 1:4 complete all as specified and directed.

M&L for 15 micron natural colour anodised aluminium cum glazed side hung window shutter section 47.00 mm x 44.50 mm x 2.00 mm and aluminium section 38.00 mm x 63.50 mm x 1.50 mm including aluminium snap beading of size 19.05 mm x 17.27 mm necessary jointing glazing clips rubber packing screws and 4.8mm thick plain/tinted/coloured glass etc and necessary fitting aluminium stay 300mm long complete all as specified and directed.

M&L for aluminium anodised grill for aluminium window the design size and spacing 65 x 75 or directed by GE of aluminium member shall be as per deco grtill DG-916, 6mm thick complete all as specified and directed.

S&F for 15 micron natural coloured aluminium section ventilator fully glazed with section 38mm x 63.5mm x 1.5 mm including necessary joints clears, glazing clips rubber packing screw 4.8mm thick coloured/white/tined glass etc complete all as specified and directed.

S&F for extruded aluminium alloy handles 125mm size, fabricated type, anodised complete all as specified and directed.

S&F for butt hinges in 100mm size, extruded aluminium alloy with galvanised mild steel hinge piin, anodised and fixed, type C-21 complete all as specified and directed

S&F for aluminium anodised in 150mm in size, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F in repair 150mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F Aluminium alloy, anodised, 250mm sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy and fixed complete all as specified and directed.

Hacking out old broken glass (any thickness, size quality of description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing sheet glass ordinary quality 3mm thick and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed.

Hacking out old broken glass (any thickness, size quality of description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing sheet glass 4.80mm ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and directed.

M&L for securing glass of any description in existing securing glass in metal frames glazed with putty/ beads including removing loose or decayed putty/ beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work complete all as specified and directed.

Dismantling floor, hearth of wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises out of MD land where directed complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surface 300x450x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match complete over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed. Note : Colour, Design & Make shall be approved by GE.

M&L for Vitrified ceramic 10mm thick tiles light shade (square/ rectangular) polished area of each tile not exceeding 0.36 sqm in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete over and including15mm thick screed bedding in cement mortar 1:6 complete all as specified and directed. Note : Colour, Design & Make shall be approved by GE.

M&L for Vitrified ceramic 10mm thick tiles light shade (square/ rectangular) polished area of each tile not exceeding 0.36 sqm for work on vertical surfaces such as skirtings, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed. Note : Colour, Design & Make shall be approved by GE.

M&L for preparation of new wooden surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over one coat of pink primer, upto 15m including necessary scraffolding and shuttering complete all as specified and directed.

S&F in repair steel rolling shutters push/pull or manual type (thickness of laths is 1.00 mm), with out ball bearing, as specified including top cover, anchoring rod, spring, hasp and staple and one shop coat of primer; erected in position as indicated including taking down old unserviceable rolling shutter complete all as specified and directed.

Greasing oiling of old steel rolling shutters any type, including minor repair and replacement defected part (labour only) area not exceeding 6 sqm each complete all as specified and directed.

M&L for chipping of unsound/weak concrete material average thickness 40mm from columns, beams etc. with Chisel including cleaning the exposed concrete surface and rusted reinforcement with wire brushes etc and repair to damaged reinforced cement concrete with cement concrete 1:2:4, type B0 (using 12.5mm graded stone aggregate) and 15mm thick plaster cement mortar 1:3 complete including necessary formwork at any location upto 12m height and disposal of debris for all lead and lifts complete as per direction of Engineer-in-Charge.

M&L in repairs for paradise horizontal blinds standards 100mm width made of cotton fabric with following accessories as mentioned below:- (a) HEADRAIL: Extruded anodised high strength aluminium alloy section with wall thickness of 1.2mm. (b) CONTROL UNIT: Made of derlin (Celon), it consists of tilting control which rotates the louvers and the traverse cord moves on pulleys in the control unit for stacking. (c) CARRIERS: Moulded of derlin (Celon) with an anti-friction additive. It consists of a housing with wheels, upper bevel gear matching lower gear, louver holding stem with a hanger book and keeper to match the hole in the top of the louver. (d) TILTER: Nickle plated brass/steel ball chain. It tilts the louver to any desired angle upto 180° and holds them at that angle. (e) TRAVERSE CORD: Braided of high strength polyster fibre, It is flexible, has minimum stretch and maximum abrasion resistance. (f) TILT ROD: Extruded hard aluminium alloy with three/four equally spaced keyways for operation of carrier gear. (g) INSTALLATION BRACKET. Made from galvanised steel of 10 gauge fitted with pressure clips made of spring steel to hold the headrail. (h) BOTTOM MECHANISM: (i) Bottom Weight made from galvanised steel sheets and is powder coated for maximum corrosion resistance. It is inserted in the louver to keep it straigh (j) Bottom chain of brass/steel nickle plated of 2 mm with equally spaced 'clear clips' fitted on it, It is attached to bottom weight, to maintain the louver spacing. FABRIC LOUVERS: Fabric woven from polyster fibres. Protective coating and fusion with chemicals is done for stain resistance and soil repellancy. (k) Fabric colour, El 2124 and EC 1110 or any other colour as approved by GE(1).

All as per item No 37.00 above but vertical blinds

U.R ASSOCIATES (BID ID -3379084)