CO Indoor Auditorium at Nahan Distt Sirmour HP SH Providing EI therein

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required

Group-C

Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with 2-way, 5/6 amps. modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.

Group-C

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required.

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required

Supplying and fixing electrical switch board, having 3 No. of 5 amp. switches and socket on suitable size of metal box of mm deep 6 modules(205mmx78mmx50mm on surface or in recess with suitable size phenolic laminated sheet cover in the front i/c providing and fixing 3 No. 5 pin 5/6 amp socket outlet and 5/6 amp modular type switch, connection, painting etc.as req.(For light plugs)

Supplying and fixing electrical switch board, having 4 No. of 5 amp. switches and socket on suitable size of metal box of mm deep 8 modules (120mmx135mmx60mm) on surface or in recess with suitable size phenolic laminated sheet cover in the front i/c providing and fixing 4 No. 5 pin 5/6 amp socket outlet and 5/6 amp modular type switch, connection, painting etc.as req.(For light plugs)

Supplying and fixing 10 Amps, 240 volts, SPN industrial socket outlet, 2-pole & earth, metal enclosed plug top, sheet steel enclosure, suitable to accommodate a 10 Amp SPN-MCB/DP, on surface or in recess, with chained metal cover for the socket outlet, complete with connections, testing and commissioning etc. as required.

Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required

2x1.5 Sq. mm.

2x2.5 Sq. mm.

2x6.0 Sq. mm.

2x10 Sq. mm.

Wiring for circuit / sub-main with 4x10 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.10 Sq.mm. (4x10+2x10) HRFRLS/PVC insulated single core copper conductor cable for earthing as required

Wiring for circuit / sub-main with 4x16 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.16 Sq.mm. (4x16+2x16) HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required.

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-

Double pole. Cat-A.

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-

Single pole. Cat-A.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wireset, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-

Double door-12 way

Double door-8 way

Double door-4 way

S/f electronic regulator step type including connections testing and commissioning as required

Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required:-

Ceiling Fan 1200 mm sweep, Category-A

Ceiling Fan 1400 mm sweep, Category-A

Providing, Installation, testing and commissioning of ceiling fan 900 mm sweep including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required:-

Providing and installation of following type of ultra slim decorative LED batten with extruded aluminium heat sink, with anti glare polycarbonate diffuser and energy efficient constant current, integral electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, including mounting clips & loop in loop out wire, connections, testing and commissioning etc. as required LED Batten Light 10 W 600mm. Make: Philips, GE, Bajaj, C&S, Panasonic or any other approved by Engineer-in-Charge.

Providing and installation of following type of ultra slim decorative LED batten with extruded aluminium heat sink, with anti glare polycarbonate diffuser and energy efficient constant current, integral electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, including mounting clips & loop in loop out wire, connections, testing and commissioning etc. as required LED Batten Light 20W 1200mm Make: Philips, Syska, GE, Bajaj, C&S, Panasonic or any other approved by Engineer-in-Charge.

Providing and installation of following type of surface mounting slim square type LED panel in white finish with anti glare polycarbonate diffuser and seprated energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc. as required. Make: Philips, Syska, GE, Bajaj, C&S, Panasonic or any other approved by Engineer-in-Charge. LED Panel Light 12W

Providing and installation of following type of surface mounting slim square type LED panel in white finish with anti glare polycarbonate diffuser and seprated energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc. as required. Make: Philips, Syska, GE, Bajaj, C&S, Panasonic or any other approved by Engineer-in-Charge. LED Panel Light 15W

Providing and installation of following type of surface mounting slim square type LED panel in white finish with anti glare polycarbonate diffuser and seprated energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc. as required. Make: Philips, Syska, GE, Bajaj, C&S, Panasonic or any other approved by Engineer-in-Charge. LED Panel Light 18W (1*1 foot)

Providing and installation of following type of surface mounting slim square type LED panel in white finish with anti glare polycarbonate diffuser and seprated energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc. as required. Make: Philips, Syska, GE, Bajaj, C&S, Panasonic or any other approved by Engineer-in-Charge. LED Panel Light 24W(1*1)sq foot

Providing and installation of following type of surface mounting slim square type LED panel in white finish with anti glare polycarbonate diffuser and seprated energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc. as required. LED Panel Light 36 W. (2*2 sq foot)Make: Philips, Syska, GE, Bajaj, C&S, Panasonic or any other approved by Engineer-in-Charge.

Providing and installation of following type of surface mounting slim square type LED panel in white finish with anti glare polycarbonate diffuser and seprated energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc. as required. LED Panel Light 45W. (2*2 sq foot)Make: Philips, Syska, GE, Bajaj, C&S, Panasonic or any other approved by Engineer-in-Charge.

Providing and installation of following type of surface mounting slim circular type LED downlight in white finish with anti glare polycarbonate diffuser and seprated energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc. as required. Make: Philips, Syska, GE, Bajaj, C&S, Panasonic or any other approved by Engineer-in-Charge. LED Panel Light 6 W

Providing and installation of following type of surface mounting slim circular type LED downlight in white finish with anti glare polycarbonate diffuser and seprated energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc. as required. Make: Philips, Syska, GE, Bajaj, C&S, Panasonic or any other approved by Engineer-in-Charge. LED Panel Light 12 W

Providing and installation of following type of surface mounting slim circular type LED panel in white finish with anti glare polycarbonate diffuser and seprated energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc. as required. Make: Philips, Syska, GE, Bajaj, C&S, Panasonic or any other approved by Engineer-in-Charge. LED Panel Light 15 W

Providing and installation of following type of Surface com Recess mounting slim circular type LED panel in white finish with anti glare polycarbonate diffuser and seprated energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc. as required. Make: Philips, Syska, GE, Bajaj, C&S, Panasonic or any other approved by Engineer-in-Charge. LED Panel Light 18 W

Providing and installation of following type of Surface Com Recess mounting slim circular type LED panel in white finish with anti glare polycarbonate diffuser and seprated energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc. as required. Make: Philips, Syska, GE, Bajaj, C&S, Panasonic or any other approved by Engineer-in-Charge. LED Panel Light 24 W

P/F, track mounted track light moveable base round focus light fully adjustable beam angle 40 degree in aluminium housing including testing connections and commissioning etc as required LED 20 Watt

P/F, track light patti including testing, connections and commissioning etc as required LED 20 Watt

P/F envirnmental friendly, ultra modern, energy saving, surface mounted, decorative over bulk head edge-lit LED luminaire comprising of high brightness LEDs complete with connections, testing & commisioning etc as required.LED Bulk head 10 W

Supplying and fixing of fancy wall bracket containing thread type CFL lamp holder (s) of all sizes and shapes, complete with all accessories but excluding CFL lamp including making connections, testing etc. as required

Long neck wall bracket 150 dia, single lamp.(Category-A)

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:-

Exhaust Fan, Heavy duty, 380 mm sweep

Exhaust Fan, Heavy duty, 300 mm sweep

Exhaust Fan, Light duty, 225 mm sweep

P/F openable sheet metal shutter suitable for exhaust fan size 300mm as P required complete in all respect.

Supplying and fixing bakelite batten/angle holder including connections etc. as required.

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required:-

Providing and installation of following type of LED retrofit lamp B-22 holder base with polycarbonate body and aluminium heat sink; suitable for input voltage: AC 220-240 V, 50/60Hz, including mounting in existing fixture, testing etc. as required complete in all respects. LED retrofit lamp 7 W Make: Philips, Syska, GE, Bajaj, C&S, Panasonic or any other approved by Engineer-in-Charge.

P/F, energy saving,Step light in powder coated cast aluminium body with IP 54 protection LED luminaire comprising of high brightness LEDs complete with connections, testing & commisioning etc as required. LED 4 W

P/F, Surface mounted powder coated die cast aluminium and anodized aluminium reflector with clear diffuser fully adjustable Focus light including testing connections and commissioning etc as required with CCT 5000K LED 10 Watt

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Nonreturn valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required

25 Liter capacity water heater (Cat-A)

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation sand cushioning, protective covering and refilling the trench etc. of the required size:-

Armoured cable 630 sq. mm (3.5 core)

Armoured cable 400 sq. mm (3.5 core

Armoured cable 300 sq. mm (3.5 core)

Armoured cable 70 sq. mm (3.5 core)

Armoured cable 35 sq. mm (3.5 core)

Armoured cable 25 sq. mm (3.5 core)

Armoured cable 6 sq. mm (twin core)

Providing and fixing following rating, three pole, manually operated, draw-out type, air circuit breaker, microprocessor based release;SR18G, open execution, in the cubicle panel, making connections, etc. as required. 1250 Amp. -50 KA; C-Power

Providing and fixing following rating, three pole, manually operated, fixed type, air circuit breaker, magneto thermal release;DN1, open execution, in the cubicle panel, making connections, etc. as required. 600/800 Amp. -50 KA; C-Power

Providing and fixing following rating and breaking capacity MCCB in the existing cubical panel board including drilling holes in the cubicle panel, making connections, etc. as required.

315/400 Amp. -50 KA

200 Amp. -16 KA

100 Amp. -16 KA

Providing & fixing following rating compact MCCB, Four Pole with Fixed Thermal & Fixed Magnetic setting having Breaking Capacity of 10 kA at 415 Volts, making connections, etc. as required.

63 amp -10 KA

32 amp -10 KA

Providing and fixing TP&N switch disconnector fuse unit cubical type, 415/500 volts with 3 No. HBC/HRC fuses, in sheet steel enclosure including drilling holes on the board, connections, earthing the body etc. as required.

320 Amp. Category-A

100 Amp. Category-A

63 Amp. Category-A

32 Amp. Category-A

Supplying and fixing copper strip bus-bars suitable for 1000 Amp. 415 volts capacity 4 No. each of cross-sectional area (50.80mmx12.70mm),in the existing enclosure with all accessories including connections etc. as required:-

Supplying and fixing copper strip bus-bars suitable for 500 Amp. 415 volts capacity 4 No. each of cross-sectional area (50.80mmx6.35mm),in the existing enclosure with all accessories including connections etc. as required:-

Supplying and fixing copper strip bus-bars suitable for 300 Amp. 415 volts capacity 4 No. each of cross-sectional area (31.75mmx6.35mm),in the existing enclosure with all accessories including connections etc. as required:-

Supplying and fixing copper strip bus-bars suitable for 200 Amp. 415 volts capacity 4 No. each of cross-sectional area (25.4mmx4.75mm),in the existing enclosure with all accessories including connections etc. as required:-

Supplying and fixing copper strip bus-bars suitable for 100 Amp. 415 volts capacity 4 No. each of cross-sectional area (25.4mmx3.17mm),in the existing enclosure with all accessories including connections etc. as required:-

Supplying and fixing copper strip bus-bars suitable for 63 Amp. 415 volts capacity 4 No. each of cross-sectional area (16mmx3.17mm),in the existing enclosure with all accessories including connections etc. as required:-

Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required.

Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required.

Supplying and laying 8 SWG Copper wire at 0.50 mtr. Below ground level for earth electrode conductor, including soldering etc. as required.

Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for vertical run)

Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for horizontal run)

Earthing with G.I earth pipe 4.5 mtr. long and 40mm dia, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required

Extra for using salt and charcoal for pipe earth electrode complete as required.

Supplying and laying 6 SWG G.I. wire at 0.50 mtr. Below ground level for earth electrode conductor, including soldering etc. as required.

Providing and fixing of lightning conductor finial, made of 25 mm dia. 300 mm long copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required.

Supplying and erection of following depth sheet metal cubical pedestal of suitable dimensions with plus-minus 5 cm variation, made from 1.6 mm thick M.S. sheet duly fabricated in a segregated manner for housing of switch fuse units, by welding each compartment on five sides & front side hinged, complete with locking arrangement, with sufficient No. vertical and horizontal intermediate switchgear housing compartments. The cubical pedestal shall have cable entry box at one or two sides, with epoxy powder coated approved paint and bonding to the existing earth etc. The same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form:-

450 mm deep (nominal

M/s Naresh Elecric Works

sai electricals