Kallakurichi District Thirunavalur Block Construction of Panchayat Office Building at Arinatham Colony H/O Arinatham Panchayat

Amount

Construction of Panchayat Office Building Near Main Road in Arinatham Colony H/O Arinatham Panchayat

Earth work excavation for foundation in all classes of soils and sub soil to full depth except in hard rock requiring blasting but inclusive of shoring strutting if required for the sides of foundation.

Cement Concrete 1:4:8 mix using 40mm ISS HBG stone jelly for Foundation and flooring including cost,conveveyance of all materials and labour charges to laid in layers not more than 15cm thick, well rammed etc, complete with standard specification

ReFilling in Basement with Excavated Earth in Layers of not more than 15 cm thick , well watered,rammed and consolidated complying with standard specification etc complete

Supplying and Filling in Basement with Filling Sand in layers not more than 15 cm thick , well ramed and consolidated complying with standard specification

Supplying and Filling in Basement with Filling Sand in layers not more than 15 cm thick , well ramed and consolidated complying with standard specification

Supplying and Fabricating and placing in position MS Steel or ribbed for steel for all reinforced cement concrete works as per the design given including cost of steel and blinding wire all floors etc., complete complying with standard specification. Colums Below GL

Column above G.L.

For Sill Slab Lintel, Portico Beam

Supplying and Fabricating and placing in position MS Steel or ribbed for steel for all reinforced cement concrete works as per the design given including cost of steel and blinding wire all floors etc., complete complying with standard specification.

Reinforced cement concrete in 1 : 1.5 : 3 , mix using 20mm iss HBG stone jelly for all reinforced cement concrete works excluding cost of centering and stell but including laying,vibrating,curing and finishing ,fixing fan clamps in the RCC floor and roof slab works wherevver necessery and bearing surface of the wall at the sides and bottom of the slab, beam shall be finished smooth with cement mortor 1:3 and craft paper without claiming extra cost.,complete compying with standard specification and as directed by the departmental officers

Below Basement

Above Basement

Brick Work in Cement Mortor 1 : 5 mix using Country Bricks of size 22 x 11 x 7 cm including cost and conveyance of all materials and labour charges etc complete

Below Basement

Super Structure

Plastering with Cement Mortor 1:5,12mm thick including cost and conveyance of all materials and labour charges including curing etc., complete complying with standard specification as directed by the departmental officers

Plastering with Cement Mortor 1:3 ,20mm thick including cost and conveyance of all materials and labour charges including curing etc., complete complying with standard specification as directed by the departmental officers

Special Ceiling Plastering and finishing all RCC exposed surfaces such as RCC Slabs,Canopies,sunshades,landing slab Beams ,etc with CementMortor 1:3, 10mm thick (one cement and three sand)including cost and conveyance of all materials and labour charges etc complete as directed by the departmental officers etc complete complying with standard specification.

Weathering Course with Brick Jelly Lime Concrete using 20 mm brickjelly with Lime of 32 : 12.5 ratio including cost conveyance of all materials and labour charges etc complete

Finishing the Top of Roof with one course of Pressed Tiles of size 23 cm x 23 cm x 2 cm laid in cement mortor 1 : 3 mix and Pointing with the same mortor mixed with water proof compound including cost conveyance of all materials and labour charges etc complete

Paving the Floor with best quality Vetrified Tiles of Size 600 mm x 600 mm of approved colour, shade and quality laid in cement mortor 1 : 3 (one cement and three sand ) 20 mm thick in all floors and the top pointed with the white cement mixed with same colouring Pigments and as directed by the departmental officers etc complete complying with standard specification

Providing granolethic floor finish in cement concrete 1:2:4 mix using 10-12mm ISS metal including cost and conveyance of all materials to site

Dadooing walls with colour designed Glazed Tiles of sizes 300 mm x 200 mm x 6 mm size of approved make and quality and colour set in cement mortor 1 : 2 ( one cement and two sand ) over 10 mm base layer plastering and pointing with white cement neatly as directed

Supply of Mild Steel Door of size 1.10 m x 2.10 m with Two leaf. Outer frame o f40 x 40 x 6 mm equal MS Angle , Shutter frame made of 35 x325 x 5 mm equal MS Angle for horizontal and vertical members and the shutter frame strengthened by stiffners of one horizontal for each shutter using MS Plate of size 20 x 5 mm fully covered with 18 Gauge plain MS full sheet welded with shutter frame neatly and also fixin by welding ,Tower Bolts 30 cm long , Butt Hinges two nos of locking handles fixing the shutter including painting the whole unit with one coat of best quality red oxide Primer

Supply of Mild Steel Door of size 1.00 m x 2.10 m with Two leaf. Outer frame o f40 x 40 x 6 mm equal MS Angle , Shutter frame made of 35 x325 x 5 mm equal MS Angle for horizontal and vertical members and the shutter frame strengthened by stiffners of one horizontal for each shutter using MS Plate of size 20 x 5 mm fully covered with 18 Gauge plain MS full sheet welded with shutter frame neatly and also fixin by welding ,Tower Bolts 30 cm long , Butt Hinges two nos of locking handles fixing the shutter including painting the whole unit with one coat of best quality red oxide Primer

Supply of Mild Steel Door of size 0.75 m x 2.10 m with Two leaf. Outer frame o f40 x 40 x 6 mm equal MS Angle , Shutter frame made of 35 x325 x 5 mm equal MS Angle for horizontal and vertical members and the shutter frame strengthened by stiffners of one horizontal for each shutter using MS Plate of size 20 x 5 mm fully covered with 18 Gauge plain MS full sheet welded with shutter frame neatly and also fixin by welding ,Tower Bolts 30 cm long , Butt Hinges two nos of locking handles fixing the shutter including painting the whole unit with one coat of best quality red oxide Primer

Supply of Mild Steel Window of size 1.20 m x 1.30 m with Two leaf. Outer frame of 35 x 35 x 5 mm equal MS Angle , Mullion section made of 35 x 35 x 5 mm equal Tee section , Shutter frame made of 25 x 25 x 5 mm equal MS Angle for horizontal and vertical members and the shutter frame strengthened by stiffners of one horizontal for each shutter using MS Plate of size 20 x 5 mm fully covered with 18 Gauge plain MS full sheet welded with shutter frame neatly and also fixin by welding , protective grill with 12 mm square M S rods at an interval of not greater than 10 cm centre to centre to the outer frame , two nos peg stays with hole for keeping the windows open in different positions , two nos of locking handles fixing the shutter with four nos of hinges hold fasts , six nos of hinges with outter frame of the window including painting the whole unit with one coat of best quality red oxide Primer .

Supply of Mild Steel Window of size 1.50 m x 1.30 m with Three leaf. Outer frame of 35 x 35 x 5 mm equal MS Angle , Mullion section made of 35 x 35 x 5 mm equal Tee section , Shutter frame made of 25 x 25 x 5 mm equal MS Angle for horizontal and vertical members and the shutter frame strengthened by stiffners of one horizontal for each shutter using MS Plate of size 20 x 5 mm fully covered with 18 Gauge plain MS full sheet welded with shutter frame neatly and also fixin by welding , protective grill with 12 mm square M S rods at an interval of not greater than 10 cm centre to centre to the outer frame , two nos peg stays with hole for keeping the windows open in different positions , two nos of locking handles fixing the shutter with four nos of hinges hold fasts , six nos of hinges with outter frame of the window including painting the whole unit with one coat of best quality red oxide Primer

Supply of Rolling Shutter of size 1.20 m x 2.10 m with frame and locking arrangements etc complete

Supply and fabrication of Steel Grill Gate of over all size of 1.50 m x 2.10 m using structural steel etc complete in all respects as directed complete

Supply of RCC JOLLY of size 0.90 m x 0.45 m etc complete

Supply and Fixing of Rcc Jolly of size 0.60 m x 0.45 m including cost and labour charges etc complete

Fixing charges for Steel Door in position etc complete

Fixing charges for Steel Window in position etc complete

Fixing charges for Jolly in position etc complete

Supply of Cudappa Slab 20 mm thick including cost and conveyance to site and labour charges etc complte

Fixing charges for Cuddapa in position etc complete

Fixing charges for Grill Gate in position etc complete

Plastering in Cement Mortor 1 : 3 mix to 20 mm thick including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete for 10 Sqm

Distembering Two Coats with best approved Oil Bound Distember including cost of Painting with Primer Coat over new plastered surface and conveyance of all materils to site and all labour charges etc complete

Painting Two Coats with approved Exterior Emulsion over one coat of Primer Coat over plastered wall surface , ceiling and other new surface including cleaning , preparing the surface,curing,scaffolding charges etc, complete.

Painting Two Coats over Iron work including cost of paint and Labour charges etc complete

Providing and fixing PVC. RainWater Downfall pipes of size 110 mm diametre with necessary shoes,bends and other specials, clamps,screws,nailsteakwood plugs etc complete including cost of all materials. The rate include cost of removable cast iron Gratings of appropriate size.The size of Teak wood plugs to be used is 150 mm x 25 mm in front and 200 mm x 75 mm in rear and all other sides with a depth of 100 mm . The pipe is to be fixed by means of U clamps at the centre of the pipe to be fixed in addition to these for more than three metres pipie length , complete complying with standard specification

Suppling and fixing in position of Indian Water Closet Coloured of size 580 mm x 440 mm , white Glazed earthen ware of approved quality with P trap or S trap confirming to is:2556 - Part XII with sand cushion and forming the closet using 40mm broken jelly lime concrete etc complete

Suppling and fixing in position of European Water Closet Coloured with " P " or " S " Trap with Double Flapped seat and seat cover with Brass Hinges and 10 Litre capacity PVC Low level Flushing Tank with all internal fittings of size 580 mm x 440 mm , white Glazed earthen ware of approved quality with P trap or S trap confirming to is:2556 - Part XII with sand cushion and forming the closet using 40mm broken jelly lime concrete etc complete

Supply and Fixing of Coloured Wash Hand Basin with Pedestal of Size 550 mm x 400 mm with all accessories such as cast iron Brackets , 32 mm dia CP Waste coupling , rubber plug and chain , 32 mm dia " B " Class G I waste pipe, 15 mm dia GM wheel valve , 15 mm dia nylon connection , 15 mm dia brass nipples , 15 mm CP . Pillar Tap etc complete .

Hand Rails Stainless Steel by Manufacturing , Suppying and Fixing of Stailess Steel Hand Rails for staircase near wet riser using 50 mm dia 304 L Grade Stainless Steel pipe of 1.60 mm thick will be provided with Tubular supports made of 304 L Grade Stainless Steel pipe of 25 mm dia of 1.60 mm thick welded to the railing. The supports will be grouted into the wall and provided with 93 mm thick Stainless Steel Circular base plate of 304 Grade . the rate shall included for Grouting into concrete with necessary supporting arrangements the Hand Rail in Floor polishing buffing ,bonding , cutting , grinding , conveyance welding charges , electrical charges etc complete . SI.No 240

Wiring with 2 x 1.50 sqm ( 22/0.3 ) PVC insulated SC unsheathedCu Conductor of 1100 v Grade in suitable PVC Rigid Pipe Concealed in wall and ceiling with PVC accesseries,in flush with wall , with TW box 150 mm x 100 mm x 113 mm TW Switch box with 3 mm thick Hylem sheet cover for 5 A 3 Pin non inter locking CS plug with painting of suitable colour with contionues earth wire connection of 14 SWG TC Wire and making good of the concealed portion with suitable colour for Concealed Plug Point SD No 25 for PVC PLUG Point

Wiring with 2 x 1.50 sqm ( 22/0.3 ) PVC insulated unsheathed single core Copper Conductor of 1100 v Grade in suitable PVC Rigid Pipe concealed in wall and ceiling with PVC accesseries with TW Switch box with 5 A F . T . Switch and making good of the concealed portion with suitable colour for PVC Concealed Light Point and Fan Point S D N o 25

Supply and Fixing of fancy glass shade and 11 W CFL in the existing light point SDnO 80

Supply and fixing of 32 A DPIC Switch of 500 v with F & N ( Side Handle ) on suitable T W Box with PWD Earthing (SD No 143)

Supply and Run of 2 of 6 sqmm ( 84 / 0.3 ) PVC insulated single core unsheathed Copper Conductor of 1100 v Grade on 7 / 20 G I Bearer wire for Service Connection Mains (S D No 66)

Supply and Run of 2 of 6 sqmm ( 84 / 0.3 ) PVC insulated single core unsheathed Copper Conductor of 1100 v Grade in 25 mm dia G I suitable Pipe B class suitably bended both ends with necessery angle iron upright and end support For Mains ( S D N 71 )

Supply and Fuixing of Water TIGHT Bulk Head fitting with Guard suitable for 11 w lamp with CFL SD No 83

Supply and fixing of 1200 mm ( 48" ) A C Ceiling Fan complete with stepped eloctronic 300 w regulator with 1.00 meter down Rod on the existing clamp S D N o 107

Supply and fixing of TNEB meter Board suitable for 32 A Single Phase SC . With 32 A Fuse Unit etc complete . SD No 125

Provision for EB Deposit charges

Provision for 1000 Litres HDF PVC Tank Ls @ 10.05 / litre

Provision for Pipe Line and Tap for Water Supply Arrangements

Provision for RWH Arrangements

Provision for Citizen Information Board

Provision forPhotographic charges etc

G DINESH (BID ID -1311561)

Rajendran Contractor (BID ID -1311884)

Rajasekar S (BID ID -1311873)