Repairs / Replacement of Chloronomeplant at swimming pool and maint of pumpsets installations sewage installation installed at ACCS Station Unit area under GE(N) Ahmednagar

Amount

Dismantling and taking down/out the burnt out electric motor 10 HP Capacity from pump foundation, from well of sewage installation and transprotation to repairing bay / workshop for replacing damaged parts such as bearings, sleeves, bushings etc. and for rewinding the electric motor with existing gauge,of super enamelled copper wire including insulating, varnishing, heating, re-assembling & testing the motor at workshop, shifting to site and refixing to its original/desired position including reconnecting all the electric connections by replacement of bolts, nuts & washers including foundation bolts after testing to make it functional etc complete all as specified and directed by Engineer-in-Charge. NOTE : Spares parts reqd to be replaced such as bearings, sleeves, bushings etc.shall be measured and paid separately

All as per srl item No 1 (here-in-before) but centrifugal/submercible motor of 20/30 HP Capacity.

All as per srl item No 1 (here-in-before) but centrifugal motor of 50 HP Capacity.

All as per srl item No 1 (here-in-before) but electric motor of 10 HP capacity, submersible pump set

All as per srl item No 1 (here-in-before) but submercible motor of 40 HP capacity

Supply and fixing in replacement ball bearing 6309, etc complete all as specified and directed by Engineer-in-Charge.

All as per item No 6 (here-in-before) but of 6310

All as per item No 6 (here-in-before) but of 6311

All as per item No 6 (here-in-before) but of 6313

Supply and fixing in replacement Stainless steel bush for mono block centrifugal pumpset of 10 HP Capacity etc complete all as specified and directed by Engineer-in-Charge.

All as per srl item No 10 (here-in-before) but of 20 HP capacity

All as per srl item No 10 (here-in-before) but of 30 HP capacity

All as per srl item No 10 (here-in-before) but of 50 HP capacity

M&L in Repair / Replacement of 40/50HP atuomatic star delta starter pump guard and over load relay etc complete all as specified and directed by Engineer-in-Charge..

All as per srl item No 14 (here-in-before) but of 30/20 HP capacity

All as per srl item No 14 above but of 10 HP capacity

Removing blockage from sewage pumpset by opening pump set completely, sluice valve, taper reducer etc including taking out sewage sludge and suspended materials accumulated at bottom of wet well, of any liquid depth/ capacity by way of any means including seperate desluding foreign material, sand, ashes, fibre, silt, grease, night soil, etc and and cleaning the wall surfaces of well etc complete all as specified and directed by Engineer-in-Charge.

Removing blockage from sewage pumpset by opening pump set completely, sluice valve, taper reducer etc including taking out sewage sludge and suspended materials accumulated at bottom of wet well, of any liquid depth/ capacity by way of any means including desluding foreign material, sand, ashes, fibre, silt, grease, night soil, etc and removing the taken out sludge mixed material/liquid out side MD land by any means/source and cleaning the wall surfaces of well etc complete all as specified and directed by Engineer-in-Charge. Note for serial item No 17 & 18 : (i) Necssary precautions as well as safety measures shall be taken by the contractor without any extra cost, for working in the foul conditions. (ii) The contractor shall be enterily responsible for the lapse, mishappening to any of the manpower deployed and / or to other equipment / machinary/material at the site of work during the execution.

Supply and fixing in replacement of unserviceable PVC insulated cable 3 Core 16 Sqmm, 1100 Volts grade, heavy duty, multistranded copper conductor for connecting motor to panel board with copper lugs duly encased through and including suitable size PVC pipe fixed to wall / laid in floors, Taking down/up unserviceable items included in Rate Quoted etc complete all as specified and directed by Engineer-in-Charge

All as per item No 19 (here-in-before) but 3 Core 10 Sqmm cable

Supply & fixing in replacement Rubber packing 3mm/ 6mm thick suitable for flanged joints complete all as specified and as directed, taking down/up unserviceable items is included in rate quoted etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs 80 mm dia cast iron sluice valve , Class PN-1.0 , ISI marked with stainless steel spindle, both ends flanged including rubber gasket, nuts bolts and washers etc complete all as specified and directed by Engineer-in-Charge.,Taking down/up unserviceable items included in rate quoted etc complete all as specified and directed by Engineer-in-Charge.

All as per srl item No 22 (here-in-before) but 150 mm dia

Material and labour for opening of unserviceable sluice valves 80mm dia, cleaning the serviceable parts, adjusting of moving parts , greasing , re-assembling of valve and fixing to the desired position with and including replacement of rubber gaskets, nuts ,bolts, washers , gland packing,Brass Check nuts and SS Spindle suitable for of sluice valve etc complete all as specified and directed by Engineer-in-Charge.

All as per item No 24 (here-in-before) but 150 mm dia

All as per item No 24 (here-in-before) but 200 mm dia

All as per item No 24 (here-in-before) but 250 mm dia

M&L for Periodical/preventive and routine maintanance of monoblock centrifugal / submersible pump set of capacity 10 HP including repairing to starter panel wiring tightening ,suitable overload relay ,timer or replacing burnt out fixed and moving LED indicators Contacts, sleeves, thimbles, nuts, bolts, washers, defective parts of starters, motor,pumps replacing gland packing rubber packing etc for smooth functioning of pump sets etc complete all as specified and directed by Engineer-in-Charge.

All as per srl item No 28 (here-in-before) but centrifugal pump of 20 HP capacity.

All as per srl item No 28 (here-in-before) but centrifugal pump of 30 HP capacity .

All as per srl item No 28 (here-in-before) but centrifugal pump of 40/50 HP capacity . NOTE:-(i) Periodical / preventive and routine maintanance shall be carried out by the authorised personnel.

Material and labour in replacement of run lead joints suitable for 80mm bore in old pipes/specials etc complete all as specified and directed by Engineer-in-Charge.

All as per item No 32 (here-in-before) but 150 mm bore

All as per item No 32 (here-in-before) but 250 mm bore

All as per item No 32 (here-in-before) but 300 mm bore

Material and labour in replacement contactor suitable for fully automatic star delta starter for 10 HP motor , in existing LT panel boards of various locations including connecting with suitable size of copper cable and lugs etc complete all as specified and directed by Engineer-in-Charge.

All as per item No 36 (here-in-before) but for 20 HP motor

All as per item No 36 (here-in-before) but for 30 HP motor

All as per item No 36 (here-in-before) but for 50 HP motor

All as per item No 36 (here-in-before) but Time delay relay

All as per item No 36 (here-in-before but Single phase preventor.

All as per item No 36 (here-in-before) but Voltmeter 0-500 Volts of existing size/shape

All as per item No 36 (here-in-before) but Ammeter 0-100 Amps of existing size/shape

Supply & Fixing in replacement MCCB 63 Amp, 3 pole 50 Hz 415 Volts, with rupturing capacity 25 KA complete all as specified and as directed,Taking down/up unserviceable items is included in rate quoted. etc complete all as specified and directed by Engineer-in-Charge.

All as per srl item No 45 above but 160 Amp, 4 pole 50 Hz 415 Volts, with rupturing capacity 25 KA etc complete all as specified and directed by Engineer-in-Charge.

All as per srl item No 45 above but 200 Amp 4 pole 50 Hz 415 Volts, with rupturing capacity 35 KA

Supply & Fixing in replacement pressure gauge of capacity 0-100 kg as per sample suitable fo 10 to 50 HP pump set etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement of monoblock pump of 0.5 HP for removing of leakage water at wet well etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs 25 mm dia flexible, green, PVC pipe, heavy duty for delivery of monoblock pump at wet etc complete all as specified and directed by Engineer-in-Charge.

Supply ad fixing in repairs of heavy duty PVC insulated PVC sheathed aluminium stranded conductor of 2 core 4 Sqmm etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for gland packing of sluice valves 80 mm bore with proper size asbestos grafite gland packing rope etc complete all as specified and directed by Engineer-in-Charge.

All as per item No 52 (here-in-before)) but 150mm dia

All as per item No 52 (here-in-before) but 200mm dia

All as per item No 52 (here-in-before) but 250mm dia

Supply and fixing in repair of PVC pipe of size 80mm bore for replacing of sewage collecting well air vent pipe with jallies etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs, non return valve, ISI marked confirming to relevent IS of size 150 mm dia etc complete all as specified and directed by Engineer-in-Charge.

All as per item No 57 (here-in-before) but 80mm dia

Material and labour for fixing of MS steel chequered plate of 5 mm thick size all as per site requirement all as specified and directed by engr-in-charge

S&F Repair/replacement of Iron coupling including rubber cupling as per site requirment etc complete all as specified and directed by Engineer-in-Charge.

S&F in Repair/replacement of automatic star delta starter for pump cap 40/50HP including single phase priventer etc complete all as specified and directed by Engineer-in-Charge.

All as per item No 61 (here-in-before) but 30HP

All as per item No 61 (here-in-before) but 10/20HP

M&L in repaire burnt out electric motor 0.5 HP Capacity from dry well of sewage installation and transprotation to workshop for replacing damaged parts such as bearings, sleeves etc. and for rewinding the electric motor with existing gauge,of super enamelled copper wire including insulating, varnishing, heating, re-assembling & after testing to make it functional etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for Servicing of chloronome plant gaseous type of capacity 0 to 400 gms per hour at swimming pool etc complete all as specified and directed by Engineer-in-Charge.

All as per serial item No 65 (here-in-before) but of capacity 0 to 200 gms per hour at KK Ranges. NOTE for srl item No 65 & 66 : The rates quoted are deemed to included the minor spares required for maintenance / repairs of plants such as washers of all types / sizes, coupling, pipes etc. and other required spares shall be measured & paid separetely.

Supply and fixing in replacement Tefflon pipe of internal dia 9.5 mm, with suitable nut and nipples suitable for chloronome plant for repair / modifications / maintenance after carefully removing unserviceable parts and testing etc complete all as specified and directed by Engineer-in-Charge.

All as per serial item No 67 (here-in-before) but Primary filter

All as per serial item No 67 (here-in-before) but Stainless steel diapharam pressure guage

All as per serial item No 67 (here-in-before) but Safety loop (`U' bend)

All as per serial item No 67 (here-in-before) but Chlorine secondary filter with NRV

All as per serial item No 67 (here-in-before) but Gas bend with NRV

All as per serial item No 67 (here-in-before) but Water chlorine mixing chamber

All as per serial item No 67 (here-in-before) but PVC solutioniser complete

Supply and fix chlorine gas control valve, with aluminium bronze silicon coating for regulating chlorine gas flow of capacity 100 gms per hour to 1000 gms per hour etc complete all as specified and directed by Engineer-in-Charge.

Supply only copper sulphate etc complete all as specified and directed by Engineer-in-Charge.

Supply only alum cristal type etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for Servicing of motor and pump 12.5 HP, 3 Ph, 415 Volts, 50 Hz, pump set installed at KK Range. by disconnecting from pump/dealigning from pump taking out end covers ,cleaning of end covers, bearings, fan blade etc and greasing of bearings with best quality heavy duty grease ,reassembling and testing to the pump by taking out unserviceable gland packing , greasing to bearing and shaft of pump providing new gland packing including tightening of gland packing to stop leakage of water from gland , tightening of all nuts, bolts etc to ensure smooth functioning of pump refixing back motor to its original position or desired location, adjusting for proper alingment etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs Bearing for 12.5 HP motor/pump etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement Coupling nuts bolts of existing size shape and length for 30 / 12.5 HP motor etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement of Star Coupling rubber bushes of existing Size / Shape for 30 / 12.5 HP pump sets etc complete all as specified and directed by Engineer-in-Charge.

Supply & applying of grease best quality for 30/12.5 HP pump/motor etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for Repair of motor/ pump 12.5 HP, 3 Ph, 415 Volts by disconnecting of pipes, foundation, transporting to workshop, opening of pump, cleaning of parts, segregating unserviceable parts carrying out repairs / machining / winding / grinding / metalling works ,greasing, oiling ,reassembling including checking for smooth functioning ,transporting back to site, fixing on existing foundation, connecting with pipes and motor adjusting for proper alignment ensuring smooth functioning complete all as specified and as directed. pump set installed at KK Range by replacement of etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for Removal / taking up of submersible pump of any capacity from existing borewell depth up to 150 mtr by disconnect of electric cable and delivery pipes etc and lowering pump along with pipe and cable on completion of repairs including connecting and testing etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for Repair of submerssible/centrifugal pump/motor up to 7.5 HP, 230/415 volts by transporting to civil work shop, opening, taking out old burnt out winding, preparing for re -winding with PVC insulated copper winding of suitable guage including all materials as required, re-assembling, testing at work shop, transporting back to site and connecting with pipe & electric supply after the pump is lowered and testing the pump for smooth functioning etc complete all as specified and directed by Engineer-in-Charge.

Supply, laying, connecting and testing in replacement flat PVC cable, water proof of size 3 Core, 4 Sq mm, 1100 Volts grade copper conductor, multi stranded for submersible/centrifugal pumps etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs nylon brush 3 inches, 4 feet long with fixing nuts ,bolts & washers etc complete all as specified and directed by Engineer-in-Charge.and matching with existing one.

Supply and fix in repairs nylon rope 20 mm dia best quality etc complete all as specified and directed by Engineer-in-Charge.. MAKE: GARWARE or equivalent as approved by GE

Supply and fixing in replacement in line Pressure Booster pump of 0.3 to 0.5 HP,single phase etc complete all as specified and directed by Engineer-in-Charge.. Make : - Grundfos model UPA 120 or equivalent makes mentioned in list of makes in Appendix `C'

Supply & fixing in replacement of 50 mm dia flexible green PVC pipe, heavy duty for delivery of suction sweeper in swimming pool etc complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in replacement of CI foot valves of size 300 mm flanged ends, lift type confirming to IS 4038 etc complete all as specified and directed by Engineer-in-Charge.

All as per item no 91 above but size of 80 mm at KK Range Pump house

Material and labour for prepration and applying two coats of synthetic enamel Painting to Cast iron water mains upto 200 mm dia of OH reservoir of height up to 20 metre complete all as specified and as directed by Engr -in- Charge.

Supply and fixing in repair of chain link fencing 4mm thick mild steel wires, mesh, size 50mm of any type of standards, rails, straining bolts, including provission of binding wire etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement street /security light fitting,the lighting luminair 60 watt LED with pressure dia cast aluminium housing ,with heat resistance toughned glass,IP 65 protection fixed on and including GI bracket made out of One mtr long 40 mm dia GI pipe light grade, bent to shape,drilled for holes and fixed to pole by means of flat iron clamps ,02 Nos,of size 40 X 4 mm etc including connecting with 1.50 Sq mm multistranded copper cable etc complete all as specified and directed by Engineer-in-Charge. MAKE : PHILIPS CG CAT part No BRP409 LED 060 CW HE NR S1 PSU GR or equivalent makes mentioned in list of makes in Appendix `C'

S&F in replacement of post top lantern 40 watt with spun aluminium conopy watt & dia cast aluminium spigot with opal PMMA acrylic diffuser pre -wired with all accessories including making necessary conection to make it functional complete all as directed by Engr -in charge. Make :Crompton CAT part no. LPTO-40-CDL or equivalant makes mentioned in list of makes in Appendex `C'

M & L for cleaning swimming tiling using suitable chemical etc complete all as specified and directed by Engineer-in-Charge.

Taking out the existing filter (pressure ) media (Sand and pebbles) for existing cylinder type pressure filter of Swimming pool removing the same outside of swimming pool depositing and stacking properly etc complete all as specified and directed by Engineer-in-Charge.

Taking out old sand & pabbles & Cleaning the inside rusted surface of pressure bed duly scrapping out with wire brush and removing algae, fungus, mud etc and washing surface with clean water and applying two coats of anti corrosive paint on the inner surface of the filter cells etc complete all as specified and directed by Engineer-in-Charge.

M&L for Preparation and Cleaning by scrapping of the old painted surface of pressure filter properly and applying two coats of silver paint on the outer surface of the filter cells etc complete all as specified and directed by Engineer-in-Charge.

M&L for Repaire /replacement to existing filter media pipe of size 80mm dia etc complete all as specified and directed by Engineer-in-Charge.

M&L for laying fresh (silica ) fine sand for supporting filter media etc complete all as specified and directed by Engineer-in-Charge., for following size.

Coarse Sand of size 1 to 3 mm

Coarse Sand of size 3 to 10 mm

Coarse Sand of size 10 to 15mm

Coarse Sand of size 15 to 25 mm

Coarse Sand of size 25 to 50 mm

Supply & fixing of filter media Umrella type nozzle of existing size etc complete all as specified and directed by Engineer-in-Charge. Make : Satya Sai / Candy filter Mumbai or equivalent as approved by GE.

Supply and fix fountaion light 18 Watt ,220 V AC IP 68 with 09 Nos LED inground burials light water proof in colours-RGB,size of 173x110x110mm etc complete all as specified and directed by Engineer-in-Charge..

S & F fountain nozzles of size 3 mm dia complete fixed on 50 mm dia pipe etc complete all as specified and directed by Engineer-in-Charge.

Supply and Refilling of Chlorine Gas on empty cylinder etc complete all as specified and directed by Engineer-in-Charge. Note :- Empty cylinder shall be issued by the deptt on nominal isuue voucher.

M&L for Dewatering and cleaning of overhead reservoir with high pressure jet to remove all mossess , algea ,dirt ,diposits and other sediments ,scubbing of internal portions with wire brushand removal of dirt with sludge machines /industrieal vaccumc leaners and disposal of the same to a safe distance including sterlizing the complete internal surfaces of the tank by using ISI mark grade I bleaching powder /liquid chlorine, washing with fresh water drying up ,applying one coat of anti fungal cement paint on internal surfaces including marking /writing the words on external wall at visible place "Military Engineer Services ' Tank Capacity Date of cleaning " using synthetic enamel paint in white colour over back background and letters height 50mm and width 40mm complete all as directed by Engineer -in -Charge and as specified for following capacities:- Note: Cleaning of the OHT's Shall be done once in Every Six Months

(i) OH Tank at New KLP 100000 Glns capacity (ii) OH Tank at BTR 100000 Glns capacity (iii) OH Tank at New AC Depot 100000 Glns capacity (iv) OH Tank at Dhobi Ghat 100000 Glns capacity

(i) OH Tank at New KLP 150000 Glns capacity (ii) OH Tank at Annex 150000 Glns capacity

(i) OH Tank at queens Rd MAP Qtr 30000 Glns capacity (ii) OH Tank at New AC Record 30000 Glns capacity

(i) OH Tank at MH DMR 120000 Glns capacity (ii) OH Tank at BTR 120000 Glns capacity (iii) OH Tank at Dhobi Ghat 120000 Glns capacity

(i) OH Tank at Kiran Line 50000 Glns capacity (ii) OH Tank at Casstle Rd 50000 Glns capacity

(i) OH Tank at Tarapore Enclave 100000 Ltrs capacity (ii) OH Tank at JK Road 100000 Ltrs capacity

(i) OH Tank at KK Range 5000 Glns capacity (ii) OH Tank at EME Wksp 5000 Glns capacity

(i) UG Sump at KK Range 10000 Glns capacity

Material and labour in replacement of GSM Based water level indicator (10 level indication) with sensors and 4 pair Cat 5e communicable cable from water level indicator to OH tank, PVC pipe and all accessories as per manufactures instruction and etc complete all as specified and directed by Engineer-in-Charge. Make:- M V INSTRUMENT / Mobitech or equivalent as approved by GE.

Supply and fixing of PVC insulated & sheathed Flexible multi core cable of 0.5 Sqmm 6 or 12 core for connection of digital water level indicator etc complete all as specified and directed by Engineer-in-Charge.

Supply & fixing iron frame including wheel nut bolts with attached teak wood brush for suction sweeper monoblock pump as per existing all as directed by Engnr -in- charge,

Supply only chlorine crystal granules confirming to IS for use in swimming pool for disinfecting of water treatment etc complete all as specified and directed by Engineer-in-Charge. MAKE: AQUAFIT or equivalent as approved by GE

Supply and laying in trenches/ drawn through pipe/fixed on walls / poles LT underground cable, 1100 Volts, heavy duty, XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured with aluminium conductor of size 50 Sq mm 3.5 core over brick/cable cover sand cushioning after taking down/out as existing at site etc complete all as specified and directed by Engineer-in-Charge.

All as per item No 125 (here-in-charge) but cable of size 4 Core, 16 Sq mm. NOTE for srl item Nos 125 & 126: Excavation & Earth work, sand cushioning and cable covers/brick protection shall be measured and paid separately.

Excavation in trenches n' exc 1.5 m wide and n' exc 1.5 m in depth and n' exc 10 Sq m on plan and getting out in Soft / loose soil etc complete all as specified and directed by Engineer-in-Charge.

Returning, filling in including spreading, levelling, watering and well ramming in layers n'exc. 25 cm thick etc complete all as specified and directed by Engineer-in-Charge.

Removing excavated material (soil) to a distance n'exc 50 m and depositing where directed at a level n'exc 1.5 m above the starting point etc complete all as specified and directed by Engineer-in-Charge.

Supply and spread unwashed dry river sand or crushed sand as sand coushioning for cables including spreading, levelling and tampping etc complete all as specified and directed by Engineer-in-Charge.. NOTE : Only punned thickness will be measured and paid.

Material and labour for brick protection with sub class 'B' bricks using old size bricks, laid dry, flat over cable, longer length of brick laid perpendicular to the cable in trenches all as directed by Engineer-in-charged.

M&L for repair/replacement new Flange at flange joint of 80mm and 150mm dia pipe welded the both end flanged joint to original position including Replace the flange,nut bolts,washers,gland packing and arresting the leakages at flanges etc complete all as specified and directed by Engineer-in-Charge.

M&L for Repairing of GSM Based water level indicator (10 level indication) with replacing New sensors and 4 pair Cat 5e communicable cable from water level indicator to OH tank, PVC pipe and all accessories as per manufactures instruction etc complete all as specified and directed by Engineer-in-Charge.

Repairs and Replacement of Ms steel base of motor pumpset 10/20/30/40/50 HP by Removing and Dismantling PCC base and MS steel channels of motorpumpset from foundation Reconstructing the PCC Foundation as per existing (1:3:6) Type C-2 using graded stone aggregates and Replacing the Motorpump set with same MS Steel angular channel,replacement of foundation nut bolts, washers,with accurate realignment of motor with pump to avoid vibration and smooth running of pump on full load,testing and commissioning etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for cast iron / ductile iron specials such as bends of any type, radius and angle, tapers any type, straight, bend, increasing, decreasing or double socket etc, tail pices single branch, "Y" junctions, double branch, cross (all sockets or socket and spigot) collars, caps and plugs etc suitable for CI / DI pipes class LA upto 300 mm bore pipes etc complete all as specified and as directed by Engineer-in-Charge

Taking up cast iron / ductile iron water mains with spigot and socket ends having Flange/ lead / tyton joints including all fittings and burning out joints, removing Flange/lead for 150 bore of pipes from 10 to 30 mtr Depth etc complete all as specified and directed by Engineer-in-Charge.

Supply and laying ductile iron pipes with spigot and socket ends centrifugally K-9 , in any length, laid in trenches for 150 mm bore pipes along with replacing New Flanges tightening with nut bolts with out any leakages up to 10 to 30 mtr depth etc complete all as specified and directed by Engineer-in-Charge. NOTE: Lead Joints,Flange Joints With ISI marked Flanges ,Tyton joints required are deemed to be included in the unit rate quoted.

Taking up or down GI steel tubing and connections from trenches / walls / floors/from 10 mtr depth of wet well etc removing from submercible motor by opening nuts, bolts and Flanges for 80 mm bore pipe complete all as specfied and directed by Engineer-in-Charge

Supply and fix 80 mm GI pipe, Medium grade including necessary fittings such as sockets, elbows, tees, reducers, unions, nipples etc laid in trenches / walls / floors/from 10 mtr Depth of wel well etc,fixing with 10HP submercible motor with nuts and bolts and along with replacing New Flanges tightening with nut bolts with out any leakages up to 10 to 30 mtr Depth ensuring without any leakages for 80 mm bore pipe etc complete all a s specified and as directed by Engineer-in-Charge.

Supply and fix 50 x 50 x 6 mm thick angle iron frame including painting with two coats of synthetic enamel paint over one coat of red oxide primer on all exposed surface arrangments etc complete all a s specified and as directed by Engineer-in-Charge.

Supply only soda ash etc complete all a s specified and as directed by Engineer-in-Charge.

Supply and fixing New MS steel ladders of 50*50*5 mm thick size all as reqd as per site reqd at swimming pool, Over head Tanks all as specified and directed by engr-in-charge

Supply and fixing in replacement of Induction motor single phase 120 Watts Capacity, Rotating with 960 RPM Speed,with model no-VST-1006 for mixing of Chlorine crystal Granules at Swimming pool etc complete all a s specified and as directed by Engineer-in-Charge.

M&L for earthing complete with galvanised steel earth plate electrode 60cmx60cm x 6 mm thick buried directly in ground vertically to depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level connected to and including GI wire 4mm as earth lead up to 7.5 mtr length by means of bolts, nuts check muts and washers etc. of galvanised iron or steel all as shown in electrical plate No. 3 including provn of GI protection pipe light grade of 20mm bore upto 7.5m length and connected earth strip to earthing test point all as shown in electrical plate No. 3 of SSR Part - I 2009 and as specified or indicated and testing on completion including necessary excavation & earthwork in any type of soil, PCC (1:3:6) type C1 using graded stone aggregate chamber, precast slab 50mm thick in cement concrete (1:2:4)type B1 using graded stone aggregate (rein forced with welded steel wire fabric (XPM) of weight not less than 4kg/sqm) with frame, funnel with watering pipe of 20mm bore medium grade, wire mesh and lugs test point etc complete all a s specified and as directed by Engineer-in-Charge.

Supply and fix DOL Starter Suitable for upto 10 HP motors Submercible/Centrifugal single phase/three phase competely as per directed by Engr-in-charge.

M&L for Removing sand,algae ,silt etc acumulated at bottom of Swimming pool by using motor pumpset completely, including taking out/down motor,brushes etc and cleaning the wall surfaces of Swimming pool complete all as specified and as directed.

Cleaning of bushes/small plants up to root level around and surrounding area E/M installations (i.e. Sewage pump houses,Over head Tanks and misc E/M installations etc) including surface dressing n exc 15cm deep and removing debris to distance n exc 50m etc complete all as specified and directed by Engineer-in-Charge

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers notexceeding 25 cm, etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing in replacement of monoblock pump of 0.5 HP for removing of leakage water at wet well etc complete all as specified and directed by Engineer-in-Charge. Make-CG/kirloskar/grundfos

Supply and fixing New MS steel channels of 50x50x5 mm thick size all as reqd as per site reqd at swim pool,Over head Tanks etc complete all as specified and directed by Engineer-in-Charge

M &L for Cement concrete in foundations,of Type B2 (1:2:4) using 40mm graded stone aggregate in filling and mass concrete for angular iron channels of Fencing etc complete all as specified and directed by Engineer-in-Charge

Taking down carefully copper/aluminum point wiring (light/fan/bell/socket, power point etc) complete , including fixture and fitting such as switches, ceilling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition seperately) and making good disturbed surfases of walls, floors etc complete all as specified and directed by Engineer-in-Charge

M&L for point wiring complete on surface of wall (open) type with two runs of 1.5 sq mm for phase and neutral single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS cable drawn in and incl PVC Casing and capping ISI Marked with its accessories with provn of PVC boxes and fixed with brass screws cup washer for fixing switches/socket/regulators etc incl 1.5 sq mm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS cable as earth continuity conductor to common earth & connecting to earth dolly for the following, etc complete all as specified and directed by Engineer-in-Charge Note : 1. Porper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2. All points are required to be earthed upto fixtures i.e. Holders, Tube lights, Wall lights, bulkhead lights, bldg security light etc

One light point controlled by switch 5 Amp single pole one way

One fan point controlled by switch 5 Amp single pole one way

One bell point controlled by switch 5 Amp single pole one way on independent board

One 3 pin 5 Amp socket outlet on same board controlled by one, one way 5 Amp switch

One socket outlet 5/3 pin 5 Amp controlled by one switch on independent board

Supply & fixing lamp holder (Angular/Straight ), insulated body, with back plate for batten fitting etc complete all as specified and directed by Engineer-in-Charge

M&L ceiling rose 3 terminal / PVC / polycarbonate, isolated body etc complete all as specified and directed by Engineer-in-Charge

S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as required etc complete all as specified and directed by Engineer-in-Charge.

Taking down Existing tube light fitting & Supply & fix Endura LED Batten fitting 20 watt with minimum 2000 lumens including connecting up with thre core twisted flexible copper conductor cable with suitable size from ceiling rose to fitting all as directed by the Engr-in-Charge. Make :- Philips ,Model no BN108C LED 20S PSU CDL WH or Equivalent in Wipro /GE

S & F in replacement double door Sheet metal enclosures factory made DBs SPN, 8 way ,240 volts ,protection class IP-42, suitable for fixing of MCBs, Isolators etc, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed. Make: Legrand ,Cat No: 5076 11 or equivalent in Simens/ Hager/ L&T

Supply & fixing MCB , SP, AC, 240 Volts of 06 to 32 Amp capacity 16KA, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge

Supply & fixing MCBs, SPN, AC, 240 volts of 40 Amps capacity 16KA, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing Bulb 9 Watt (cool day light) having colour temp 6500 K and lumen output 950 suitable to fix on batten holder and wall light etc complete all as specified and directed by Engineer-in-Charge

Taking out old building security light ( HPSV/Tube light fitting) & S & F LED bldg security light 20 Watt with suitable size of barcket and three core wire & fixing arrngenet incl nuts bolts clamps etc of Make Philips ,Cat No:BRP022 LED20 CW MR S1 PSU GR or Eq in Wipro/ Jaguar

Supply & fix in replacement of single pointed air termination Copper rod, 12 mm dia, 300 mm long including Taking down existing copper rod complete all as specified and directed.

Supply & fix in replacement of Copper strip 25 mm x 3.15 mm Complete with saddles and fixing screws on including epoxy Insulater for Fitting the strip.including Taking down existing copper strip complete all as specified and directed.

Supply & install in replacement of GI strip 32 mm x 6 mm buried ground/floor/surface/roof Complete with saddles and fixing screws on including epoxy Insulater for Fitting the strip, including taking down existing GI Strip complete all as specified and directed

Material and labour for earthing complete with copper earth plate electrode 600 x 600 x 6.0 mm thick, buried vertically in ground (Each pit not less than 2.25 mtrs deep below normal ground level with top edge of plate not less than 1.50 M below normal ground level) connected to copper strip 20 x 3 mm, by means of bolts, nuts, and check nuts and washers etc encased in GI protection pipe 40 mm dia light grade pipe for protection of earth strip both to be provided to the extet of 7.5 meters, all as shown on electrical plate No 3 of MES SSR - 2004 Part - I, GI protection pipe buried in ground, laid under floors / plinths or mixed on walls / pole etc or concealed in walls etc; with provision of mixture of charcoal dust and common salt packed upto minimum 150 mm all around the earth plate, including PCC 1:2:4 type B-1 earth pit with M.S angle iron frame, cast iron cover with locking arrangement, with GI 20 mm dia medium grade pipe and MS funnel with wire mesh for watering arrangement, including necessary excavation and earth work in any type of soil / strata and testing on completion complete all as specified and directed. Note:- i) Cost of copper strip 20 x 3 mm upto 7.5mtr and protection pipe 40 mm dia is deemmed to be included in rate quoted ii) Excavation and returning filling of Soil any type is deemed to be included in rates.

M&L for earthing of poles/system with galvanised earth plate 60x60 cm x 6.30 mm thick electrode of size and 32 x 6mm GI strip buried vertically in ground not less than 2.25 mtr below ground level with top edge of the plate not less than 1.5 mtr below ground level and connected to copper strip dia by means of nuts, bolts and washers and encased in and including 40mm dia GI medium grade pipe upt 2.4 mtr height form ground level fixed by MS flat iron clamp 40mm x 5mm with nut, bolt and washers, GI strip fixed to base along pole and connected to over head line for providing earthing to HT pole/feeder AB switch LA complete with charcoal dust, salt packed around plate 150 mm thick including watering GI pipe, medium grade 20 mm dia with blanking cap 1.5 mtr long fixed to funnel with wiremesh complete with PCC chamber and RCC chamber over all as per Electrical Plate No 5 of SSR Part I - 2009 incl excavation and earth work in any type of starta and testing on compeltion etc complete all as specified and directed by Engineer-in-Charge (Note: Note:- i) Cost of GI strip 32 x 6 mm upto 7.5 mtr and protection pipe 40 mm dia is deemmed to be included in rate quoted ii) Excavation and returning filling of Soil any type is deemed to be included in rates.).

M&L for Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos. 8mm dia 25mm long hex. head screw etc including Taking down existing etc complete all as specified and directed by Engineer-in-Charge

An amount of Rs 1,04,554.00 shall be deducted from BOQ on account of schedule of credit