Shifting of 630 kVA, 11/0.433 KV Bed Mounted Sub-Stn alongwith Renovation of Overhead Electrical Infrastructure by way of replacing old deteriorated LT Conductor and undersized/deteriorated ST/DW/PCC HT-LT poles with new ST Poles in DC Office, Sgr

Amount

Supply and Erection of ST Pole 11 Mtr. Long (ST-410 SP56) with Galvanized Channel Iron Earthing Arrangement (as per Drawing CE/P&P/Dwg/2022-STP-E0001 attached) including its loading from factory unit, carriage and unloading upto site. (Poles shall be got tested at the cost of bidder prior to its delivery at site for erection)

Supply and Erection of ST Pole 9 mtr. long (ST-410 SP33) with Galvanized Channel Iron Earthing Arrangement (as per Drawing CE/P&P/Dwg/2022-STP-E0001 attached) including its loading from factory unit, carriage and unloading upto site. (Poles shall be got tested at the cost of bidder prior to its delivery at site for erection)

Supply and Erection of ST Pole 8 Mtr. Long (ST-410 SP15) with Galvanized Channel Iron Earthing Arrangement (as per Drawing CE/P&P/Dwg/2022-STP-E0001 attached) including its loading from factory unit, carriage and unloading upto site. (Poles shall be got tested at the cost of bidder prior to its delivery at site for erection)

Supply, Laying, Testing and Commissioning of 0.1 ACSR Conductor

Supply, Laying, Testing and Commissioning of 0.05 ACSR Conductor

Supply, Laying, Testing and Commissioning of 0.03 ACSR Conductor- for tapping/jumpering

Providing, Fabrication and Fixing of GI Channel/Angle/Flat of sizes for H-frame structure including for Bed Structure

Providing, Fabrication and Fixing of Galvanized V Cross-Arms duly fabricated of size 75x40x6mm Channel Iron Cross Arm with 04 No. (50x50x6mm) welded flat iron plates as per Drg. No. CE/P&P/DRG/2022/11KVL001) including Pole Top Bracket fabricated out of a) 65x65x6mm (385 mm length), b) ISLC 75x40x6mm (65 mm long), c) MS Flat 02 No. (262 mm length each) and necessary Clamps/Pole Collars

Providing, Fabrication and Fixing of Pole Post fabricated from MS Pipe Post 10' long having 6'' dia with proper sized end plates (for supporting bed structure) including proper paint (red oxide/aluminium paint/tractor orange) including Cemet Bottoming (0.25 cum)

Providing and Fixing of Galvanized Nuts and Bolts of sorts

Supply, Installation, Testing and Commissioning of Gapless Surge Arrestor, 9 KV, 10 kA, LA with polymer housing, Stn. Type

Supply, Installation, Testing and Commissioning of 11 KV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type including pipe, handle, pad lock etc including its earthing using 25x3 mm strip

Supply, Installation, Testing and Commissioning of 11 kV Horn Gap Fuse Set 3 Phase 200 Amp

Supply, Laying, Testing and Commissioning of 630 mm sq Single Phase Cable, 1.1 KV Grade, un-armoured XLPE Insulated Stranded Conductor FRLS type

Supply, Laying, Testing and Commissioning of 400 mm sq Single Phase Cable,1.1 KV Grade, un-armoured XLPE Insulated Stranded Conductor FRLS type

Providing and Earthing of substation --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body, G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover.

Providing and Fixing of Aluminium Lugs 630 sq mm

Providing and Fixing of Aluminium Lugs 400 sq mm

Providing and Fixing of Bi-metallic Clamps for 630 kVA Transformer

Providing and Fixing of 11 kV Polymeric composite Pin Insulator 12kV, 5kN, Lightening Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

Providing and Fixing of 11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm (with fittings)

Providing and Fixing of LT Spacers 3P4W

Providing and Fixing of Wedge Connectors / PG Clamps

Providing and Fixing of GI Pole collars 50x8 mm (Back Clamps Dimensions as per Drawing attached) for D.O/Fuse/Operating handle/ AB Switch/Belting Angle etc

Supply, Installation, Testing and Commissioning of LTDistribution Box for 630 kVA DTR with 01 No. 1000 Amp MCCB 3P 36 kA for incomer 03 No.'s 300 Amp MCCB 3P 25 kA and 09 No. Outgoing Link Disconnectors. 16 Amp Single Pole MCB 02 No. also included. (Aluminium Bus Bar 40x15 for Phase and Neutral also). The job shall also include earthing of LT Distribution Box.

Providing and Fixing of LT Shackle Insulators 16 KN 100 mm

Providing and Fixing of GI Muki Clamp of 50x8 mm galvanized flat iron having end inner dia 18 mm for Shackle Insulators suitable for ST Pole with back clamp and galvanized nuts and bolts

Providing and Fixing of 11 KV Danger Plates with Clamps

Providing and Fixing of Anticlimbing Device using GI Barbed wire with end Clamps (2 kg Barbed wire per job/pole with 2 G I clamps with GI nuts/bolts and washers)

Providing and Earthing of ST Poles 11/9/8 mtr long Complete by GI Pipe 40 mm 3 mtr long through GI Strip 25x3 mm

Providing and Laying of Cement Bottoming of ST Poles 11 mtr long in 1:2:4 Mix as per approved drawing (0.6 cum/pole)

Providing and Laying of Cement Bottoming ST Poles 9 mtr long in the ratio 1:2:4 mix as per approved drawing (0.5 cum/pole)

Providing and Laying of Cement Bottoming of ST Poles 8 mtr long in 1:2:4 Mix as per approved drawing (0.45 cum/pole)

Providing and Painting of ST Poles 11 mtr long with 1 coat of red oxide and 2 coat of aluminium paint

Providing and Painting of ST Poles 9 mtr long with 1 coat of red oxide and 2 coat of aluminium paint

Providing and Painting of ST Poles 8 mtr long with 1 coat of red oxide and 2 coat of aluminium paint

Shifting of Consumer Meter/ (Conventional / Smart) from existing pole to New Pole (including connectioning and proper clamping arrangement)

Dismantling of Old Electrical Network(mentioned hereunder) and Carriage Charges for Returnable Materials (complete) to Divisional Stores at Bemina

Dismantling/Shifting and Commissioning of existing 630 kVA, 11/0.433 KV 3-phase Distribution Transformer (Cu wound) using Pvt. Hired Crane/Hydra

Dismantaling of old concrete/stone masonary bed and its proper disposal

Dismantling of old 400 mm sq 1.1 KV grade 1-core PVC Cable (3 circuits of 40 mtr each)

Dismantling of old/deteriorated 0.1/0.05 ACSR Conductor

Dismantling of old ST Pole 9 mtr long

Dismantling of old ST Pole 8 mtr long

Dismantling of old PCC Pole (with proper disposal)

Dismantling of old Wooden Pole

Dismantling of old MS Channel Iron Cross Arms/Angle Braces of Sizes

Dismantling of old HT Accessories including DO Set/Link Set/Pin Insulators etc

Dismantling of old/deteriorated LT Distribution Box (complete)

Loading/Unloading and Carriage Charges for dismantled Returnable Materials (complete as detailed above from BOQ S.No. 1.41 to 1.49) to Divisional Stores at Bemina

Branch Cutting/Pruning of Trees along the electrical network corridor

Providing/Submission of Both Pre and Post Work Execution Geo-Tagged Coloured Photographs of subjected work on A4 sized photopaper (2 pics per page- Pre and post)

M/S R R ELECTRICAL SERVICES

U M TRADERS

M/S INTERNATIONAL STORES

UBAID SUPPLIERS AND CONTRACTORS

sofi and sons