Construction of a modern Multi-Disciplinary Divisional Training Institute at Old TB Hospital near Giri Maidan, Kharagpur under the juridiction of ADEN/Settlement/KGP.

A-Execution of all works covered under Schedule-A. 9289620.91 Below/P

B-Execution of all works covered under Schedule-B. 199546.51 Below/P

C-Execution of all works covered under Schedule-C. 124027.50 Below/P

D-Execution of all works covered under Schedule-D. 165897.16 Below/P

E-Execution of all works covered under Schedule-E. 2521425.60 Below/P

F-Execution of all works covered under Schedule-F. 645716.76 Below/P

G-Execution of all works covered under Schedule-G. 25066.30 Below/P

Item Breakup - A-Execution of all works covered under Schedule-A.

pattern. 17.0 SANITARY INSTALLATIONS 17.1S General KHARAGPUR DIVISION-ENGG/SOUTH EASTERN RLY Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with 17.2 manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 17.2.1 W.C. pan with ISI marked white solid plastic seat Each 2 6515.55 13031.1 46 and lid Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm 17.7 C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.3 White Vitreous China Wash basin size 550x400 Each 2 2301.75 4603.5 47 mm with a pair of 15 mm C.P. brass pillar taps Providing and fixing white vitreous china water 17.13 closet squatting pan (Indian type) : 48 17.13.2 Orissa pattern W.C. pan of size 580x440 mm Each 2 3169.05 6338.1 17.23 Providing and fixing white vitreous china flat Each 4 1648.95 6595.8 back or wall corner type lipped front urinal basin 49 of 430x260x350 mm or 340x410x265 mm sizes respectively. 17.24 Providing and fixing white vitreous china Each 1 4048.65 4048.65 50 squatting plate urinal with integral rim longitudinal flush pipe. Providing and fixing P.V.C. waste pipe for sink or 17.28 wash basin including P.V.C. waste fittings complete. 17.28.1 Semi rigid pipe 51 17.28.1.1 32 mm dia Each 5 103.9 519.5 17.35 Providing and fixing soil, waste and vent pipes : 17.35.1 100 mm dia 52 17.35.1.1 Sand cast iron S&S pipe as per IS: 1729 Metre 3 1151.9 3455.7 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP 17.73 brass screws with concealed fittings arrangement of approved quality and colour. 17.73.2 600 mm long towel rail with total length of 645 Each 8 708.95 5671.6 53 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, and all CPVC plain & brass threaded fittings, including fixing the pipe 18.7 with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. ( Internal work - Exposed on wall ) 54 18.7.1 15 mm nominal dia Pipes Metre 50 286.8 14340 55 18.7.2 20 mm nominal dia Pipes Metre 35 335 11725 56 18.7.3 25 mm nominal dia Pipes Metre 35 401.55 14054.25 KHARAGPUR DIVISION-ENGG/SOUTH EASTERN RLY Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This 18.8 includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 57 18.8.1 15 mm nominal dia Pipes Metre 5 497.8 2489 58 18.8.2 20 mm nominal dia Pipes Metre 35 537.6 18816 18.15S BRASS FITTINGS Providing and fixing gun metal gate valve with 18.17 C.I. wheel of approved quality (screwed end) : 59 18.17.1 25 mm nominal bore Each 3 622.4 1867.2 18.54S PTMT FITTINGS Providing and fixing PTMT bib cock of approved 18.54 quality and colour. 18.54.1 15 mm nominal bore, 86 mm long, weighing not Each 10 125.6 1256 60 less than 88 gms Providing and fixing PTMT stop cock of approved 18.55 quality and colour. 18.55.1 15 mm nominal bore, 86 mm long, weighing not Each 4 118.5 474 61 less than 88 gms Providing and fixing PTMT pillar cock of 18.56 approved quality and colour. 18.56.1 15 mm nominal bore, 107 mm long, weighing Each 2 208.45 416.9 62 not less than 110 gms 18.59S AIR VALVE & WATER METER (BULK TYPE) 18.64 Providing and fixing PTMT swivelling shower, 15 Each 4 121.4 485.6 63 mm nominal bore, weighing not less than 40 gms 21.0 ALUMINIUM WORK 21.1S General Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with 21.1 required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.1 Anodised aluminium (anodised transparent or Kg 70 495.05 34653.5 64 dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever 21.1.2 required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) KHARAGPUR DIVISION-ENGG/SOUTH EASTERN RLY 21.1.2.1 Anodised aluminium (anodised transparent or Kg 60 598.6 35916 65 dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. 21.3 complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.1 With float glass panes of 4.0 mm thickness Sqm 100 1176.8 117680 66 (weight not less than 10kg/sqm) 22.0 WATER PROOFING 22.1S General 22.14 Grading roof for water proofing treatment with 22.14.1 Cement concrete 1:2:4 (1 cement : 2 coarse cum 120 8042.3 965076 67 sand : 4 graded stone aggregate 20 mm nominal size) Total 8077931.23

Item Breakup - B-Execution of all works covered under Schedule-B.

Item Breakup - C-Execution of all works covered under Schedule-C.

Item Breakup - D-Execution of all works covered under Schedule-D.

Item Breakup - E-Execution of all works covered under Schedule-E.

Item Breakup - F-Execution of all works covered under Schedule-F.

proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure). 2.2 Supplying and stacking of good earth at site cum 160 515.6 82496 including royalty and carriage upto 5 km lead 2 complete (earth measured in stacks will be reduced by 20% for payment). Supplying a n d stacking a t s i t e d u m p manure from approved source, including carriage upto 5 2.4 km lead complete (manure measured in stacks will be reduced by 8% for payment) : 2.4.1 Screened through sieve of I.S. designation 20 cum 22 254.15 5591.3 3 mm 2.5 Rough dressing the trenched ground including Sqm 1600 1.5 2400 4 breaking clods. KHARAGPUR DIVISION-ENGG/SOUTH EASTERN RLY 2.8 Spreading of sludge, dump manure and/or good cum 160 52.35 8376 earth in required thickness as per direction of 5 officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately). 2.9 Mixing earth and sludge or manure in the cum 160 36.55 5848 6 required proportion specified or directed by the Officer-in-charge 2.13 Preparation of beds for hedging and shrubbery cum 160 222.85 35656 by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 7 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately) Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of 2.14 manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) 8 2.14.2 Holes 90 cm dia, and 90 cm deep Each 40 143.1 5724 2.33 Providing and laying Neelgiri/Mexican grass turf Sqm 1600 214.4 343040 with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and then rolling 9 the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in- charge Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable 2.57 material's as per direction of officer in charge (excluding cost of plant & water) 10 2.57.3 Hedge Plant /Ground cover Each 600 2.45 1470 7.0 TREE PLANTS 7.44 Providing and stacking of Foxtail palm of ht. Each 40 650 26000 240-270 cm bottom girth 35- 40 c m well 11 developed in big size HDPE bags as per direction of the officer-in-charge. 8.0 SHRUBS 8.46 Providing and stacking of Murraya exotica of Each 600 15 9000 12 height 45-60 cm. in poly bags of size 15 cm as per direction of the officer-in-charge. Total 538097.30

Item Breakup - G-Execution of all works covered under Schedule-G.

Supplying, fitting and fixing mosquito proof wire Sqm mesh/Netlon of approved quality as per direction of Engineer-in-charge. Total 25066.30 KHARAGPUR DIVISION-ENGG/SOUTH EASTERN RLY