ADDN/ ALTN OF 02 X SINGLE OFFR ACCN P-286 OF 61 CAV AND SPL REPAIR OF ROOF TREATMENT BLDG NO.P-330 AT PARA AND ADDN / ALTN TO PARKING SHED AND COMP WALL P-01 AND PROVN OF PARKING SHED IN P-453 AT JAIPUR MIL STN UNDER GE (S) JAIPUR

Amount

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5metre in depth for wall foundation etc or for manhole/ cable laying/poles/struts not exceeding 10 sqm on plan and not exceeding 1.5 metre in depth and getting out in soft/loose soil, , complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 78 MW1: 26.7

M&L PCC 1:4:8 type D2 using 40 mm graded stone aggregate in foundations, filling and mass concrete, complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 8.5 MW1: 2

M&L Brick work with subclass 'B' bricks (old size), straight or curved on plan exc 6 m mean radius built in cement mortar 1:6, complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 54.5 MW1: 22.7

M&L Brickwork with subclass‘B’ (old size) bricks, straight or curved on plan to any radius in half brick thick walls built in CM ( 1:4), complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 10

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick (Horizontal or sloping) for fair finished flat surfaces of concrete., complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 60

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor & roofs n exc 20 cm wide & sides of RCC/PCC bands in walls, horizintal or sloping & similar work exc 10cm but n exc 20cm wide Roughed finished surface of concrete, complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 35

M&L reinforced cement concrete (nominal mix) Type B1 1:2:4 (20 mm graded aggregate) in lintels upto 1.5m clear span, seismic and other similar bands, lintel bands, plinth bands, roof bands and the like. Note :- Reinforcement & formwork shall be measured separately., complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 1.5

M&L reinforced cement concrete (nominal mix) Type B1 1:2:4 (20 mm graded aggregate) in slabs supported on walls, beams and columns in floors, roofs, shelves and the like. Note :- Reinforcement & formwork shall be measured and paid for separately., complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 7.5

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 200 MW1: 500

All as per item above but for 6mm to 8 mm dia , complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 1000 MW1: 250

All as per item above but 5mm dia and over upto and including10mm dia in stirrups, spacers and binders, complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 250 MW1: 150

M&L Sand Filling under floors including spreading,watering and levelling in layers n exc. 25 cm thick Note :- Soil obtained from excavation under item 1 here-in-before shall be used for filling., complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 15

Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in soft/loose soil, complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 41 MW1: 15.7

Removal of excavated soil to a distance exc. 250m but not exc. 500m and depositing , complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 32.5 MW1: 11

M&L 75mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base to floor finished fair & even , complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 40

M&L rendering 15 mm thick in CM(1:6) on brick walls or concrete surface, surface finished even and smooth without using extra cement, complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 160 10/SR/61SA/BLDG/22-23: 450

M&L rendering 10mm thick in cement mortar 1:3 on stone masonry surfaces in ceilings finished fair and even, complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 40 10/SR/61SA/BLDG/22-23: 218

M&L rendering 15mm thick in cement mortar 1:4 on stone masonry surfaces or surface other than fair face of brick work of walls, finished fair & even, complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 160 10/SR/61SA/BLDG/22-23: 400 MW1: 260

M&L preparation of new plastered surfaces and applying two coats of weather base paint of approved shade on walls over a coat of 1mm thick wall care putty and primer, complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 160 MW1: 260

M&L preparation of new plastered surfaces and applying two coats of plastic emulsion paint of approved shade/tint over a coat of 1mm thick wall care putty on walls , complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 160

M&L preparation of new plastered surfaces and applying two coats of plastic emulsion paint of approved shade/tint over a coat of 1mm thick wall care putty on ceilings , complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 40

M&L 30mm ( average thickness ) PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in floors and surfaces finished fair & even. , complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 60

M&L Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including over 15mm thick screed bed in CM (1:6),, complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 160

S&F light shade Vetrified Ceramic tiles edge cut 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including over 10mm thick plaster in CM (1:4) , complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 10

M&L for coloured Non Skid Ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match incl over 15mm thick screed in CM(1:6) , complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 24 10/SR/61SA/BLDG/22-23: 11

S&F Coloured Glazed ceramic tiles size 350x450mm x 7mm thick edge cut on walls etc in the combination of light and dark shed concept . set & jointed in neat cement slurry & pointed in white/coloured cement to match incl over 10mm thick plaster in cement mortar (1:4), complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 120 10/SR/61SA/BLDG/22-23: 245

Water Proof Treatment to RCC Roof comprises the following, complete all as specified and as directed by Engr-in-Charge:- (a) Complete removal of existing roof treatement and disposed off the rubbish outside the defence land (b) All visible cracks to be opened up in V shape cleaned properly with wire brush washed and filled with cracks filling compound using cracks upto 15mm width of cracks (c) cracks of 15mm width are filled with URP cement grouting by injecting nozzles by authorised applicator of manufacturer carefully by following manufacturer's instructions (b) after drying one coat of roof coat paint shall be applied with roller in both directions with a gap of 12 hrs @ 1 Ltr per Sqm (each direction) of roof coat over a roof priming coat of 0.5 Ltr of water mixed to 1 ltr of roof coat (e) necessary gurantee for 5 years shall be submitted by the contractor, complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 50 10/SR/61SA/BLDG/22-23: 655

S&F Powder Coating any color (minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. , complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 12

S&F Powder Coating any color (minimum thickness of powder coating 50 micron) Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) for including powder coating of any colour all as per manufacturers specification, complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 30

S&F tinted glass 5mm thick, ordinary quality & glazing with rubber packing in square as required & directed by Engr - in - Charge, complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 7

S&F Figured glass 5.0mm thick, pin head type & glazing with rubber packing in squares n. exc 0.5 sq.m in each pane, complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 4

S&F Plain framed, panelled shutter 35mm thick (tany number of panels)with lock rail & panel of 9mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both face. 2nd Class HW rail & style of size as per IS:1003 (Part I), kiln seasoned & chemically pressure treated, complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 6

M&L Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a);supplied and fitted to chowkats, complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 6

S&F 1st class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed, complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 0.32

M&L in repairs Fancy type MS bracket suitable for curtain rod, complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 40

M&L in repairs 20 mm dia Drapery Fancy type CP made up on MS tube of thickness 1 mm curtain rod, complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 24

M&L in repairs Fancy type Finial CP made of MS suitable for above curtain rod, complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 40

S&F in repair elegent mirror PVC cabinet of size 450mm x 555mm (Make: Neelkamal Gem Mirror Plastic Wall Mount Cabinet or equivalent) , complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 4

S&F in repair Tooth brush holder/ Tumbler brass CP for putting bathroom utilities ((Make-Parryware CAT PART NO T6903A1 or equivalent) , complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 2

S&F in repair Soap dish brass CP (Make-Parryware CAT PART NO T6403A1 or equivalent) , complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 2

S&F in repair PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints fixed to wall, complete all as specified and as directed by Engr-in-Charge. 10/SR/61SA/BLDG/22-23: 3

S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors, complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 26

S&F in repair PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints fixed to wall, complete all as specified and as directed by Engr-in-Charge. 10/SR/61SA/BLDG/22-23: 2

S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors, complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 30

S&F PVC (SWR) bends any radius 75mm dia, complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 4

S&F in repair PVC (SWR) bends any radius 110mm dia, complete all as specified and as directed by Engr-in-Charge. 10/SR/61SA/BLDG/22-23: 1

S&F PVC (SWR) bends any radius 110mm dia, complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 4

S&F PVC (SWR), junction single, (Single T) equal or unequal 75mm dia, complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 4

S&F PVC (SWR), junction single, (Single T) equal or unequal 110mm dia, complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 4

S&F PVC (SWR) vent cowl 110mm dia, complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 4

M&L PVC (SWR) gully trap 125/110 mm, setting & jointing with solvent cement, complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 4

S&F in repair Toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws (Make: Parryware Cat Part No. T6405A1 or equivalent) , complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 4

S&F bathroom Glass corner of best quality (as per sample), complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 6

S&F in repairs white rimless Single piece-WC with UF soft close slim seat cover, Hinges, fixing accessories and accessories set and cistern fittings, S trap, incl all neccessories items complete all as specified. Make : Jaquar, CAT Part No OPS-WHT-15853S300UF, Roca Cat Part No. RS34273700H and Kholer Cat part No. K-77739T-SL-0, complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 2

S&F in repair Vitreous China wash hand basin oval/ designer white , size 640 x 515 x 210mm excluding CP waste coupling, excluding taps, waste chain & plug etc ( Make-PARRYWARE Titan C0436 (CTH) or equivalent), , complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 2

S&F in repair waste fittings 32mm bore , brass, CP for glazed ware sinks, basins, etc with long screwed shanks & fly-nuts, flange end bedded in red lead cement & other end fixed (Make: Parryware CART PART NO T9911A1 or equivalent), complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 2

S&F in repair CP bottle trap with internal partition 32 mm size with 300 mm X 190 mm long wall connection pipe and wall flange for WHB (Make-Parryware CAT PART T3201A1 Light 9” or equivalent), complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 2

S&F stop valve 15mm, copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions, complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 4

S&F in repair Stop valves 20 mm bore, copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 4 10/SR/61SA/BLDG/22-23: 1

S&F of CP health faucet with long chain for EWC including flexible pipe for 15 mmdia bore Cardiff with SS Hose & Hook (Brass) (Make: Parryware T9875A1 of equivalent), complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 2

M&L of PVC Nahani / floor trap and square in size of 100X100 mm including MS chromium plated grating 125mm dia of weight not less than 50gm for floor trap / Nahani trap,, complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 4

Dismantling old GI pipes of any size, length and thickness, complete all as specified and as directed by Engr-in-Charge. 10/SR/61SA/BLDG/22-23: 8

M&L for new galvanised steel water tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors of following sizes , complete all as specified and as directed by Engr-in-Charge.

15 mm bore 02/LBW/61SA/22-23/Q3W: 50 10/SR/61SA/BLDG/22-23: 5

20 mm bore 02/LBW/61SA/22-23/Q3W: 30 10/SR/61SA/BLDG/22-23: 3

S&F in repair Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I 1000 Ltrs Capacity, complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 2 10/SR/61SA/BLDG/22-23: 1

S&F Ball brass valves 20mm bore, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule , complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 2 10/SR/61SA/BLDG/22-23: 1

M&L for providing circular, raised platform of height 15 cm below the tank and base 10 cm more than the external dia of thank of PVC cylindrical water tank of capacity 1000 liters using PCC 1:3:6 type c1 using 20mm graded stone aggregate with smooth finish , complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 1 10/SR/61SA/BLDG/22-23: 1

S&F in repair CP cast copper alloy bib taps two way with wall flange and areator fancy tupe of 15mm bore (Make- Parryware CAT PART NO T5034A1 Uno Two Way Bib Cock or equilvalent), complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 6

S&F in repair PVC connection 15mm bore with 2 Nos PTMT nuts, 45cm long fixed with one end to pillar tap & the other end to stop cock or iron pipe, complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 10

M&L in repair CP Fancy type centre hole basin mixer 15mm bore cast copper alloy (Make- Parryware PART NO Activa G5346A1 Tall Basin Mixer or equivalent) , complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 2

M&L in repair CP wall Mixer with flange & 115mm long bend pipe for over head shower flanges and crutch etc quarter turn (Make- Parryware Alpha G2716A1 Wall mixer 2-in-1 or equivalent), complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 2

M&L in repair Towel ring of brass C P Square flange (Make-Parryware CAT PART No T6904A1 or equivalent), complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 2

M&L in repair Chromium plated Overhead Rain shower with relvoling joint and 225 mm long shower arm with wall flange 15mm bore fancy type with arm (Make- Parryware CAT PART No T9814A1 Airmix Shower Head or equivalent), complete all as specified and as directed by Engr-in-Charge. 10/SR/61SA/BLDG/22-23: 1

M&L Chromium plated Overhead Rain shower with relvoling joint and 225 mm long shower arm with wall flange 15mm bore fancy type with arm (Make- Parryware CAT PART No T9814A1 Airmix Shower Head or equivalent), complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 2

M&L in repair Chromium plated angle stop cock with wall flange fancy type cast copper ally 15mm bore any colour (Make- Parryware CAT PART No Alpha G2707A1 or equivalent), complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 10 10/SR/61SA/BLDG/22-23: 1

S&F galvanised mild steel wire cloth 0.50 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples all as directed by Engineer- in -Charge., complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 16

S&F MS holdfast, hook and pintle hinges, large hasp and staples, clamps, hooks for hanging fans and similar small articles conforming to Fe-290 Gde E-165 including necessary welding etc. and fixed in position. , complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 10

S&F 100 mm butt hinges medium weight cold rolled mild steel, ISI marked, fixed to angle iron chowkats including welding complete., complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 21

S&F brass, barrel tower bolts 150mm long of extruded section., complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 14

S&F brass sliding door bolt 300 mm long with hasp, staple (bolt type) & fixing clips of sheet, . or extruded sections & fixing bolts & sliding bolts of extruded sections., complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 2

S&F brass handles 125 mm size, . type, anodised, complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 10

S&F brass body floor door stopper overall length 140 mm double legged with rubber shoe, fixed to bottom rail of door as directed., complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 4

Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil., complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 40

M&L for hardcore of broken stone or boulders, gauge not exc. 63mm, deposited, spread and levelled in layers not exc 15 cm thick, watered and rammed to a true surface all as directed. , complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 8.5

M&L for PCC 1:3:6 type C1 using 20mm graded stone aggregate as in plinth protection, 50mm thick finished even and smooth without using extra cement., complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 40 10/SR/61SA/BLDG/22-23: 100

Supply only Integral waterproofing compound, complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 5

M&L of Two coats of French Polish on Untreated surface including Touch wood two coats etc, complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 10

M&L Granite 16 to 18 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in CM(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, , complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 11

Demolition of Brickwork or stone/boulder masonry, built in lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 6 MW1: 22.7

Taking down Chowkats or frames exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames), complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 8

S&F in repair stop valve 15mm, . copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions, complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 6

Dismantling of old U/S grating .and M&L of PVC Nahani / floor trap and square in size of 100X100 mm including MS chromium plated grating 125mm dia of weight not less than 50gm for floor trap / Nahani trap.( Make Paryag and equilant ), complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 3 10/SR/61SA/BLDG/22-23: 2

S&F Particle Board Core Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing and incl Extra for PVC sheet in lipping in case of PVC sheet is heat bent as lipping on the edges of doors complete as per manufacturers specification , complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 4

S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) complete as per manufacturers specification, complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 10

Providing and fixing suspended false ceiling using mineral fibre board of size 600 x 600 x 15mm as ceiling over and including suspension metal(galvanised iron) system ) designer grid (15mm grid 8mm return) bevelled tegular suprafine XL 15mm / silhouete complete including necessary hanging system arrangement 6 mm dia suspenders as per manufacture's instruction which is required to be made from existing RCC roof/stone slab of building of Make :- Armstrong(ANF RH 90) or equivalent make of Everest / Gypsum India Ltd/ Bison / Aerolite, complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 40

Taking down cement plaster including raking out joints, hacking for key scrubbing down with water etc built in CM , complete all as specified and as directed by Engr-in-Charge. 10/SR/61SA/BLDG/22-23: 1068

M&L for preperation of new plastered or unplastered surfaces of wall and applying Two coats of Oil Bound Distemper complete all as specified and as directed by Engr-in-Charge., complete all as specified and as directed by Engr-in-Charge. 10/SR/61SA/BLDG/22-23: 450

M&L Applying three coats of white wash on new Ceiling surface including preparation of surface., complete all as specified and as directed by Engr-in-Charge. 10/SR/61SA/BLDG/22-23: 218

M&L Applying two coats of cement base paint, white or tinted on new wall surface including preparation of surface., complete all as specified and as directed by Engr-in-Charge. 10/SR/61SA/BLDG/22-23: 450

Hacking out old broken glass any thickness size, quality or description from wooden/steel frames fixed with wooden beads/metal pinning and S&F 3 mm thick sheet glass in squares not exc 0.50 sqm in each pane fixed with wooden beads or putty (in metal frames etc) , complete all as specified and as directed by Engr-in-Charge. 10/SR/61SA/BLDG/22-23: 5

S&F Sheet glass 4.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane, complete all as specified and as directed by Engr-in-Charge. 10/SR/61SA/BLDG/22-23: 6

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and as directed by Engr-in-Charge. 10/SR/61SA/BLDG/22-23: 5

M&L for preparation of old plastered surface of walls, pillars and cornices incl brooming down and cleaning surfaces and applying two coats of oil bound distemper, complete all as specified and as directed by Engr-in-Charge. 10/SR/61SA/BLDG/22-23: 250

M&L Complete removal of existing treatement incl scraping of ceiling and applying two coats of white wash on ceilling , complete all as specified and as directed by Engr-in-Charge. 10/SR/61SA/BLDG/22-23: 400

M&L for preparation of old plastered surface of walls, pillars and cornices incl brooming down and cleaning surfaces and and applying two coat of cement base paint, complete all as specified and as directed by Engr-in-Charge. 10/SR/61SA/BLDG/22-23: 50

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises , complete all as specified and as directed by Engr-in-Charge. 10/SR/61SA/BLDG/22-23: 256

S&F in repair Vitreous China wash basin , coloured oval sape, size 550x400mm but including brackets, coupling and wast pipe, complete all as specified and as directed by Engr-in-Charge. 10/SR/61SA/BLDG/22-23: 1

S&F in repair stop valves, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends fancy type chromium plated with long shank and cup (concealed type), 15 mm bore, complete all as specified and as directed by Engr-in-Charge. 10/SR/61SA/BLDG/22-23: 1

M&L in repair 15mm bore CP fancy Type Pillar taps, cast copper ally, with capstan heads chromium plated , screwed down high pressure , with or without letterd "Hot " or 'Cold' with long screwed shanks and fly-nuts screwed for iron pipe (Make: Paryyware cat part No. G2701A1 or equivalent), complete all as specified and as directed by Engr-in-Charge. 10/SR/61SA/BLDG/22-23: 1

S&F in repair 15mm bore Bib taps, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule and fixed, fancy type chromium plated long body (Make- Parryware T5006A1 or equivalent), complete all as specified and as directed by Engr-in-Charge. 10/SR/61SA/BLDG/22-23: 2

S&F in repair PVC connections 15mm size with PTMT nuts of length 300mm, complete all as specified and as directed by Engr-in-Charge. 10/SR/61SA/BLDG/22-23: 2

S&F in repairs PVC valve less syphonic action type low level flushing cistern coloured with inlet ball valve float and handle incl bracket 10 Lit capacity , complete all as specified and as directed by Engr-in-Charge. 10/SR/61SA/BLDG/22-23: 1

S&F in repairs vitreous china water closet Indian type 580 mm X 440 mm long pan white with 'P' or 'S' trap front or back inlet footrest including provn of lime concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match, , complete all as specified and as directed by Engr-in-Charge. 10/SR/61SA/BLDG/22-23: 1

S&F in repair Soap dish brass CP (Make-Parryware CAT PART NO T6403A1 or equivalent) , complete all as specified and as directed by Engr-in-Charge. 10/SR/61SA/BLDG/22-23: 1

Demolition of Stone slabs in roofs, suspended floors, chajjas, landings, etc any thickness jointed in any mortar, complete all as specified and as directed by Engr-in-Charge. MW1: 21.36

Demolition of two way Trellis work (Jafri), including taking as under of battens in trellis (posts and rails measured separately) , complete all as specified and as directed by Engr-in-Charge. MW1: 42.72

M&L Providing precast cement concrete louvres and jallies, Set in cement mortar 1:4, Type B0 1:2:4 (12.5mm graded aggregate), 35mm thick (measured solid), including all mouldings but excluding frame, complete all as specified and as directed by Engr-in-Charge. MW1: 25

M&L Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, complete all as specified and as directed by Engr-in-Charge. MW1: 21.36

Excavating in post holes (or similar holes) each n.exc 0.50 cum and removing surplus soil to a distance n.exc 50 m and making good surface in soft/ loose soil, complete all as specified and as directed by Engr-in-Charge. MW1: 3 MW2: 6

M&L for PCC 1:3:6 type C2 using 40 mm graded stone aggregate in foundations, filling and mass concrete, complete all as specified and as directed by Engr-in-Charge. MW1: 0.6 MW2: 0.8

M&L Fe-290 (Gde E- 165) Plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleatsandotherconnections , complete all as specified and as directed by Engr-in-Charge. MW1: 50 MW2: 100

S&F Fe 410 -W (Gde- E- 250) quality- A Rolled mild steel in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, complete all as specified and as directed by Engr-in-Charge. MW1: 850 MW2: 614

M&L preparation of new untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed by Engr-in-Charge. MW1: 30 MW2: 20

S&F Pre-painted galvalume aluminum zinc coating GI based Corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and as directed by Engr-in-Charge. MW1: 36 MW2: 36

M&L RCC Nominal mix Type B0 1:2:4 (12.5mm graded aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and as directed by Engr-in-Charge. MW1: 6.2

Formwork Rough finished surfaces of concrete Flat sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, complete all as specified and as directed by Engr-in-Charge. MW1: 64

E/M Portion Taking down copper/aluminium point wiring(light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell/buzzer,bracket light fittings etc(excluding fans and fan regulators) and making good disturbed surfaces of walls, floors, etc. to match with existing surface , complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 112

M&L Point wiring using approved colour coding as per IS, with 1.5 Sqmm single core PVC insulated and sheathed multi stranded copper conductor FRLS cable of 1100 V grade (ISI marked) in and including concealed PVC conduit 20mm bore with all accessories fixed on surface/ceiling by means of PVC sleeve/dash fasteners with cadmium plated screw and teakwood blocks closed recessed for mounting switch, sockets, regulators modular type etc. including, Mild steel Sunken box, earth dolly with zinc coated, including 1.5 sqmm single core PVC insulated and unsheathed copper conductor FRLS cable 1100 V grade (ISI marked) earth continuty conductor to common earth and connected as continuous earth wire to earth dolly, including zinc coated MS sunken box and 3mm thick phenolic laminated top sheet and top cover etc. (Note: Cost of hole cutting in wall for points as per site condition/ making good etc shall be deemed to be included in the quoted rate against the item/ wiring on stone wall is included in the above quoted rate., complete all as specified and as directed by Engr-in-Charge.

One light/fan/ bell point controlled by one switch 02/LBW/61SA/22-23/Q3W: 76

One 3 pin 5 Amp socket outlet on the same board with other switches 02/LBW/61SA/22-23/Q3W: 8

One 3 pin 5 Amp socket outlet on independent board with other switches 02/LBW/61SA/22-23/Q3W: 12

All as per item No 129 above but Point wiring with 2.5 Sqmm copper cable for 3 pin 15 Amps socket outlet on independent board, including 2.5 Sqmm copper cable continuous earth wire and connecting to common earth dolly , complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 8

All as per item No 129 above but Point wiring with 4 Sqmm copper cable for 3 pin 15 Amps socket outlet on independent board, including 4 Sqmm copper cable continuous earth wire and connecting to common earth dolly, complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 8

S&F in repairs of Modular switch, piano type flush/ Bell push button type 230/250 volts ISI marked following, complete all as specified and as directed by Engr-in-Charge.

Modular switch 1 way 6A, 1 module 02/LBW/61SA/22-23/Q3W: 96

Modular switch 1 way 16A, 1 module 02/LBW/61SA/22-23/Q3W: 8

Modular Bell push 6A 1 module 02/LBW/61SA/22-23/Q3W: 2

S&F Buzzer, Ding Dong AC. 230 volts, single pole, complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 2

S&F Modular Socket, 6A - 2/3 pin combined 2 module,, complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 20

S&F Modular Socket 6A/16A - 2/3 pin combined 2 module, complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 8

S & F Modular stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd, complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 8

S&F in repair Ceiling rose surface bakelite, 3 Phase/ PVC/ Polycarbonate isolated body (ISI marked) complete all as specified and as directed by Engr-in-Charge., complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 52

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers, complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 2

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1400 mm sweep. Min air delivery 245 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC), complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 8

Supply & Fix surface mounted LED downlight in power coated white finish with integrated electric driver, LED fittings 1X 20 Watt complete with all accessories pre wired twin core twisted copper wire with suitable size complete all as specified and as directed by Engr-in-Charge. Make: Crompton Cat Part No. LCRP-20 NW or Equivalent, complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 6

Supply & fixing in repairs Energy saving environmental friendly, Trim Line LED Batten Tube Light fittings 18/20/22 Watt ,1200mm(4 feet) TL, long life, impact proof,surface/wall mounting IP20,100 Lm per Watt, extruded Thermoplastic body with PC diffuser greater than 120 degree wide distribution available in 6500K CCT with high brightness LEDs complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size complete including dismantling of old existing unserviceable fluorescent/LED TL Make - Crompton cat Part No. LDL-20-CDL or equivalent , complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 20

Supply & fixing in repairs Energy saving environmental friendly, LED Batten Tube Light fittings 10/12 Watt ,600mm(2 feet) TL, long life, impact proof,surface/wall mounting IP20,100 luminaire per Watt, extruded Thermoplastic body with PC diffuser greater than 120 degree wide distribution available in 6500K CCT with high brightness LEDs complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size complete including dismantling of old existing unserviceable fluorescent/LED TL Make - Crompton cat Part No. LDL-10-CDL or equivalent, complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 8

Supply and Fix Post top lantern LED 40 Watt, 230 Volt Outdoor type, 360° indirect light with IP 65 protection. Resistant to impact and corrosion. Glare-free with LED Lamp and accessories Make: Crompton cat part No. LPTO-40-CDL or Equivalent, complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 4

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc., complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 2

Supply and fixing LED security light fitting 35 Watt 230 V AC outdoor type with treet lights are aerodynamically designed for all weather conditions with excellent thermal management, made with pressure die cast housing with toughened glass and high power LED's with secondary optics and IP66 protection. Efficacy ≥ 110LPW 10KV SPD Included, including painted brackets/ screws of suitable size. Make: Crompton : TRP-400-35-57-SL-LM-NSR or equivalent , complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 6

Supply, laying & testing cable XLPE insulated, armoured heavy duty, electric cable with aluminium conductor, 1100 volts grade, of X-Section area 3.5 core 35 sq mm , complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 210

"M&L dry tibba sand for cushioning to PVC under ground cable with screened and washed sand punning to provide a required cover complete all as specified and as directed by Engr-in-Charge. Note :- For the purpose of payment only punned thickness shall be measured", complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 16

M&L for brick for protection of PVC under ground cable with common burnt clay building bricks sub class B with width equal to length of brick laid dry and flat abutting each other with gaps between adjacent bricks not exceeding 10mm complete all as specified and as directed by Engr-in-Charge., complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 1.7

S&F 240V Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20Amp MCB, complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 6

M & L for sub main wiring with 4 run of 10 sqmm single core multi stranded copper conductor PVC insulated, FRLS but unsheathed cable 1100 Volts grade drawn through and including 25 mm dia rigid conduit medium grade with all conduit accessories and fixed on wall/surface as directed including two run of 6.00 sqmm PVC insulated multistranded copper earth contuinity conductor including taking down old unserviceable sub main wiring (4x10.0 sq. mm + 2x6.0 sq. mm earth wire) , complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 140

M & L for sub main wiring with two run of 4 sqmm single core multi stranded copper conductor PVC insulated, FRLS but unsheathed cable 1100 Volts grade drawn through and including 25 mm dia rigid conduit medium grade with all conduit accessories and fixed on wall/surface as directed including one run of 2.50 sqmm PVC insulated multistranded copper earth contuinity conductor including taking down old unserviceable sub main wiring (2x4.0 sq. mm + 1x2.5 sq. mm earth wire), complete all as specified and as directed by Engr-in-Charge. 02/LBW/61SA/22-23/Q3W: 160

S&F factory made sheet distribution board double door protection class IP-42 double door type suitable for mounting MCB/MCCB conforming to IS 13032 IS- 8623 and BS 5484 with minimum 200 Amps bus bar of under mentioned ratings complete all as specified and as directed by Engr-in-Charge. (Note: Cost of wall cutting for suitable mounting of DBs in recess alongwith proper connection with suitable lugs and making good disturbed surfaces with PCC work will be inclusive in above item quoted price.), complete all as specified and as directed by Engr-in-Charge.

SP & N 8 ways 02/LBW/61SA/22-23/Q3W: 4

TPN 4 ways 02/LBW/61SA/22-23/Q3W: 2

S&F amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning, confirming to IS-8828, IEC-898, rupturing capacity of the under mentioned type and rating. Complete all as specefied and as directed by Engineer-in-Charge. :- , complete all as specified and as directed by Engr-in-Charge.

SP 5 upto 32 AMP 02/LBW/61SA/22-23/Q3W: 48

SPN above 32 to 63 AMP 02/LBW/61SA/22-23/Q3W: 4

TPN 63 Amp 02/LBW/61SA/22-23/Q3W: 2

M&L Earthing complete as per electrical plate No. 3 of MES SSR Part-I with galvanised steel earth plate electrode 60cmx60cmx6.0 mm thick, buried directly vertically in ground in a pit depth not less than 2.5 metres below ground level with top edge of earth plate at a depth not less then 1.8 metre below normal ground level connected to and including galvanised iron or steel earth wire 4 mm dia by means of bolts, nuts check nuts and washers of galvanised iron or steel. Earthing wire shall be protected by galvanised iron or steel pipe 15 mm bore medium grade and connected to continuous earth wire on pole / test point to main board. Watering pipe shall be 20 mm bore GI medium grade. The earthing shall be of inclusive of excavation & earth work in any type of soil, charcoal, salt, funnel PCC pit and RCC cover, complete all as specified and as directed by Engr-in-Charge. Note-: Following items deemed to be included in quoted rate (a) Earth Electrode (b) Main earthing lead from earth electrode to test point and further to equipment to be earthed upto 7.5 metre (c) M&L for connecting earth electrode and earthing lead as specified (d) Adequate quantity of charcol dust and common salt as directed (e) All labour involved including testing of earth net work (f) Excavation and earth work or drilling hole for electrode (g) P.C.C pit and C.I cover (h) Funnel and watering pipe, wire mesh and copper lugs etc. as specified (j) G.I protection pipe of size ordered specified for protection of earthing lead from mechanical injury or tempering. (k) connected lead from test point to main switch or switch board or equipment to be earthed 02/LBW/61SA/22-23/Q3W: 6

UNIVERSAL INFRAPROJECT PVT LTD

M/S ROHIT CONSTRUCTION

Sh. Manoj Nagar