Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.8 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹35.4 L+₹1.5 L (4.47%)Rejected-Finance | L2 | Rejected-Finance Higher bid value. | |
| 3 | L3₹36.5 L+₹2.6 L (7.82%)Rejected-Finance | L3 | Rejected-Finance Higher bid value. | |
| 4 | L4₹36.5 L+₹2.7 L (7.99%)Rejected-Finance | L4 | Rejected-Finance Higher bid value. | |
| 5 | L5₹36.8 L+₹2.9 L (8.62%)Rejected-Finance | L5 | Rejected-Finance Higher bid value. |
Tender Value
₹33.6 L
EMD Value
₹67,500
Closing Date
11 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Gangtok
GE Gangtok New Mil Stn Gangtok, Sikkim PIN-737102
SPL REPAIR TO BLDG NO T217 AND SEWAGE WATER TANK NEAR SH44 AND PROVN OF 11X GEYSERS 50 LTRS AT BLDG NOS P01 P02 AND P03 OR LIVING AND T597 OFFRS LIVING AND PROVN OF COVERED CEMENT WATER TANK WITH STORAGE CAPACITY OF 10,000 LTRS NEAR BLDG NO T66
2022_MES_551959_4
8060AE8
Open Tender
Civil Works
Works
182 days
GE Gangtok New Mil Stn Gangtok
As per tender documents
8 documents required · 8 mandatory
₹500
GE Gangtok
₹67,500
Yes
17 Feb 2023
20 Jan 2023
13 Feb 2023
21 Jan 2023
11 Feb 2023
26 Jan 2023
Amount
Dismantling plain or corrugated sheeting, any gauge, thickness all as specified
Dismanting of wall and ceilling boards (fiber pulp insulation etc( or insulation boards.slabs/blankets any thickness including cover fillets all as specified
Dismanting of timber in scantling 40 sqcm and over in section in any position in unframed work all as specified.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area exc 1.5 sqm but n.exc 4.0 sqm all as specified and as directed
Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area exc 1.5 sqm as specified and as directed
Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing), removing from the Sites and rubbish off the Premises all as directed.
Supply and fix 0.50mm tihick pre -painted galvalume aluminium zinc coating GI based corrugated steel sheets of any colour having tensile strength of 550 mpa as in roof covering fixed with self tapping screws as in roof complete all as specified and directed by the Engr-in-charge
Supply and fix 0.50mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheets of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws as in roof complete all as specified and directed.
M&L for mild steel rolled sections conforming to Fe-290 (Gde E-165) as in main and cross beams, hip and jack rafters, purlins where connected to commom rafter and running rails and guides for sliding doors, fixed with angle cleats or other connecting platers.
M&L preparation of old zinc or galvanised surfaces of any description over 10cm in width or girth not otherwise discribed by coating with moderate solution to receive painting and applying one coat of synthatic enamel paint all as specified and directed.
S&F 08-10mm thick PVC ceiling/wall panels of interlocking types, widith 250/255 mm with lamination design and exc 60% of PVC content including necessary H-joints internal/external corner trim, coner cove F/J edge trims where required fixed with hidden screws to and including steel/wooden frame work complete all as specified and as directed.
M/L non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws seamless calcium silicate celling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with celluose fibre fixed to the ceiling secton with 25mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, inclding finishing the joint of face board with specially formulated jointing compound and 48mmm wide fibre tape to provide seam less finish. Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid complete all as specified and directed.
M&L Non skid ceramic colured tiles 7-8mm thick (square/retangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, in floor etc set and jointed in neat cement slurry and pointed in white or colour cement to match over including 15mm thick screed bed with CM 1:6 in floor receive the tiles all as specified and as directed
M&L Glazed ceramic colour tiles in vertical surface 350x250x7mm/450x 350x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to matchs complete all as specified and as directed
S & F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, all as specified.
S&F 30mm thick Flush shtters, solid core construction, with block board core and plywood face panels commercal type on both sides complete all as specified and directed.
M&L perparation of new or previously untreated wooden surfaces of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed
S/F steel windows with side hung shutters including projecting type hinges with steel handle and sqm steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
S/F for 3mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sq m Sqm in each panel complete all as specified and directed
S/F wash basins. Vitreous china (flat back or angle back type) of size 630x 450mm including matching pedastal fixed with and including cp waste and brackets complete all as specified and directed by the Engr-in-charge.
S/F Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed by the Engr-in-Charge
S&F pillar taps of PT MT any colour for iron pipe high pressure screwed for iron pipe and fixed 15mm dia minimum ult 110gm complete all as spcified and directed by the Engr-in-Charge.
S/F Soap dish, vitreous China white, approximate size 160x 160x90mm any type, fixed to plugs with chromium plated brass screw complete all as specified and directed.
S/F vitreous china wash down water closet pan (one piece EWC with seat cover and fitting) of size 700x370x760 snow white/ lvory etc including vitreous china flush cistern of capacity 10 litre complete all as specified and directed.
M&L for 125mm long aluminimun handles cast type, anodised complete all as specified and directed by the Engr-in-Charge.
M&L for 15 mm bore steel tubing medium grade galvanised with all fittinged to walls & laid in floors complete all as specified and directed.
Taking down cement plastering on brick/stone wall etc. Including racking out joint, hacking for the key, scubbing down with waterr complete all as specified and directed.
M & L RCC (Nominal mix) type B1, 1:2:4 using 20mm graded stone aggr as in foundation, including rafts, footing, foundation beam, plinth beam, using liquid WPC complete all as specified and as directed. Note: liquid WPC measured and paid saperately in relevant items
M&L RCC (Nominal mix) type B1, 1:2:4 using 20mm graded stone aggr as in wall retaining wall, using liquid WPC compelte all as specifed and directed. Note: liquid WPC measured and paid saperately in relevant items
M & L for formwork to side of concrete foundation, flooring bases of collums and similar work not exceeding 200mm thick etc complete all as specified and as directed.
M & L for formwork to faces of wall, retaining wall, staircase railing etc complete all as specified and as directed.
M &L mild steel TMT Bars 10mm dia and over cut to length bend to shape required including cranking bending spirally for column, hooking ends & binding with and including mild steel mild steel wire (annealed not less that 0.90mm dia or securing with chip) completed
M&L for 20 mm thick rendering in two layers 10mm each in cement mortar (1:4) with using water proofing compound in external layer as per manufacturer insturctions on fair faces of brick/ concrete surfaces top layer finishes even and smooth using extra cement complete all as specfied and directed.
Supply only liquid water proofing compound
M/L for priming surfaces and applying heavy treatment including APP based polymeric menbrane minimum weight 3 Kg/Sqm and minimum 3 mm thick reinforced with polyster non wove fabric (npt less than 150 ms/sqm) and or primd surfaces by forced application complete all as specified and directed
M & L for plain cement 1:3:6 type C-2 as in plum concrete in retaining walls etc including plums concrete complete all as specified and directed by the Engr-in-Charge Note: stone boulders (Basalt, trap or any other approved) paid seperately)
Supply only boulder pitching and packing all as specified and directed.
S&F cost iron vent pipe 75mm dia fix in concrete etc all as specified and directed.
M&L for excavation over area in soft loose soil n.exc 1.50m deep and getting out etc complete all as specified.
M&L for removing excavated materials n.exc 50m and depositing where directed at a level n exc 1.5m above the starting point out etc complete all as specified at a level n.exc 1.5m above the starting point out etc complete all as specified
M&L for spreading and leveling in layers n.exc 25cm thick and well ramming including watering as required
M&L for cement concrete type D2 1:4:8 (40 mm graded stone agg) as in foundation etc complete all as specified
M&L RCC Nominal mix 1:2:4 using 20mm graded stone aggr as in slabs supported on walls beams and coulmns in floores using liquid WPC compelte all as specifed and directed. Note: liquid WPC measured and paid saperately in relevant items
M&L RCC Nominal mix 1:2:4 using 20mm graded stone aggr as in beams, cantilevers etc using liquid WPC compelte all as specifed and directed. Note: liquid WPC measured and paid saperately in relevant items
M&L for formwork to edges of concrete flats floors and etc Exc 5 cm but n. Exc 10 cm complete all as specified and as directed
M&L for formwork to fair finishes of soffits of suspended slabs such as roof slabs landing and similar slabls etc
M &L mild steel TMT Bars 5mm dia and over cut to length bend to shape required including cranking bending spirally for column, hooking ends & binding with and including mild steel mild steel wire (annealed not less that 0.90mm dia or securing with chip) completed
M&L for precast cement concrete in cover slabs (for manholes) set in CM 1:4 type B1 1:2:4 (20mm graded stone aggr) etc all as specified and directed
M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate as in plinth protection/path etc (75mm thick) finishing the surface even and smooth without using extra cement complete all as specified and directed
M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate as in surface channels/drain including forming fair finished to drain channel.
M & L for hard core of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed.
Mild steel bar Fe 410 (Gde E250) quality or Fe 290E-165) 16mm dia as in rungs
M&L for excavation in trenches n.exc. 1.5m wide and n.exc 1.50m depth for foundation and getting out in soft loose soil etc complete all as specified.
Taking down carefully the old unserviceable Copper/Aluminium Point Wiring (Light, Fan, Socket or Power) complete including fixtures and fittings such as switches, ceiling rose pendants, regulators, sockets, light fittings etc and removing materials for taking credit and making good disturbed surfaces of wall floor etc all as specified and as directed
M & L for point wiring with 1.5 Sqmm PVC isulated unsheathed single core stranded copper conductor (FRLS) cable of working voltage 1100 Volts grade conforming to IS-694 pt-I & II of 2000 drawn in and including 25 mm size PVC casing caping (Double lock) with all casing capping fittings & accessories with 1.60 mm thick pressed steel or mild steel sheet sunk box covered with 3mm thick backelite sheet fixed with brass screws & cup washers including 1.5 sqmm PVC insulated unsheathed single core stranded copper conductor (FRLS) cable as earth continuity conductor connected to main switch/ DB's or common earth dolly complete for light point/ fan point/ exhaust fan point / call bell point controlled by one switch 5/6 AMP one way complete all as specifed and directed.
All as per item No 54 herein before but one switch socket outlet point 5/6 AMPs on independent board
All as per item No 54 here-in-before but for one socket outlet of 15 AMPs fixed on independent board with 4 Sqmm multistranded copper conductor wire FRLS PVC insulated and 4 Sqmm copper conductor wire FRLS PVC insulated using as earth wire complete.
S &F switch piano flush button, single pole, one way, 5 amps complete all as specified and directed.
S & F ceiling rose surface bakelite 2/3 terminals complete all as specified and directed
S & F stepped type electornic fan regulator flush type on the existing phenolic laminated sheet etc as reqd.
S & F switch socket combination 5-in-1, 5/6 AMPs complete
S &F switich socket combination 2-in-1 6 PIN 5/6 AMPs or 15/16 AMPs complete
Supply & fix lamp holder angular/straight insulated body, with back plate suitable for battern futtings, white/ivory finish complete all as directed.
Supply & fixing LED light fitting 1 x 20 W, 220 V AC decorative box type with dirver, holder including LED tube light connecting up with three core flexiable copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
Supply and fixing LED light fitting 1x9W/ 1x10W bulk head luminaries including LED light driver holder connecting up with three core flexible copper flexible copper conductor cable of suitable size complete all as directed.
S&F MCB DB SPN 8 ways double door, IP-42, IK-09 with metal door, rated bus bars earth bar, neutral and complete incl blanking plates as & fixed flush to wall surface complete all as specified and as directed.
S & F MCB single pole & neutral 40 to 63 AMPs. 240 Volts 10 KA repturing capacity. 'C' curve complete all as directed by Engineer-in-Charge
S & F MCB single pole 6 to 32 AMPs, 240 Volts. 10 KA rupturing capacity, C Curve complete all as directed by Engineer-in-charge
M&L for earthing complete with galvanised steel earth plate electrode 600x600x6.3mm thick buried directly in ground earth pit not less than 2.25 mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below ground level connected to galvanised iron or steel earth lead wire 4mm dia size by means of nut/bolt and washer of galvanised iron or steel as shown in electrical plate No. 3 of SSR Part-I 2009 incl necessary excavation and earth work, GI pipe 20mm dia medium grade ISI marked for watering and GI pipe 15 mm dia medioum grade ISI marked pipe for protection of GI earth wire etc, PCC chamber with PCC (1:3:6) type c-2 precast RCC cover with reinforced cement concrete (1:2:4) type B1 (20 mm graded stone aggregate) reinforced with 8mm dia TMT bar @ 150mm c/c both way with provision of 10mm dia MS bar handle funnel, wire mesh, charcoal dust, salt etc connected to DB as indicated including testing complete
Supply, install, testing & commissioning of electric water heater in repairs, storage vertical type, 5 star rated, 50 ltr capacity comprising of high wattage heating element for instant heating, extra thick inner tank of superior grade, rust & shock proof outer body, non-ferrous pressure plate with & incl provn of 04 Nos grouting bolts suitably flushed to wall or any other surface incl Hot & cold water pipe for geyser inlet and outlet connection & electric connection with 3 core PVC insulated sheathed, standed copper conductor cable/flexible chord complete all as specified and as directed. Make : Havells Cat No- GHWAMGSWH050 or equivalent in Crompton/ Bajaj
Supply & fixing rotaitonal moulded polythene water storage tank 1000 ltrs capacity, ISI marked multi multilayer constraction (cylindrical vertical with closed top) hoisted & fixed in position including supply and fixing of 25mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe of having weigth not less than 455 gms including connection complete all as specified and as directed.
M & L for 25mm dia steel tubing medium grade galvanised with all fitting fixed complete to walls and ceilling or floor complete all as specified and as directed.
M & L for 20mm dia steel tubing medium grade galvanised with all fitting fixed complete to walls and ceilling or floor complete all as specified and as directed.
M & L for 15mm dia steel tubing medium grade galvanised with all fitting fixed complete to walls and ceilling or floor complete all as specified and as directed.
Supply & fix 25mm bore gun metal valves, ISI marked with iron wheel head screwed both ends for GI pipe complete all as specified and directed.
Supply & fix 20mm bore gun metal valves, ISI marked with iron wheel head screwed both ends for GI pipe complete all as specified and directed.
Supply and fix stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15 mm, complete all as specified and directed
Supply and fix bib taps, cast copper alloy fancy type with crutch or butterfly handle, screwed down, crewed for iron pipe or for brass ferrule and fixed or size 15mm, complete all as specified and directed
Supply and fixing GI tubing 150mm dia medium grade ISI marked laid in trenches/under floor on ground/floor including all fittings such as elbow, union, reducer, tees, bends etc and short length complete all as specified and as directed by Engr in Charge
Supply and fixing GI tubing 80 mm dia medium grade ISI marked laid in trenches/under floor on ground/floor including all fittings such as elbow, union, reducer, tees, bends etc and short length complete all as specified and as directed by Engr in Charge
Supply and fixing GI tubing 50 mm dia medium grade ISI marked laid in trenches/under floor on ground/floor including all fittings such as elbow, union, reducer, tees, bends etc and short length complete all as specified and as directed by Engr in Charge
Excavation trenches not exceeding 1.5m wide and not exceeding 1.5m depth for laying/repairs to pipe line and getting out in any soft soil all as specified by Engr-in-charge
Returning and filling in excavated soil including spreading, leveling, watering and well ramming in layers not exe 25cm all as directed
Removing surplus excavated soil not exceeding 50m and depositing where directed at level not exceeding 1.5m above starting point.
Supply and fix Sluice valve class PN 1.6 with stainless steel spindle and check nut of size 150mm dia complete as directed.
Supply and fix Sluice valve class PN 1.6 with stainless steel spindle and check nut of size 80mm dia complete as directed.
S & F gun metal gate valves of size 50mm bore ISI marked with iron wheel head screwed both ends for iron pipe and fixed.
M & L for PCC type C2 (1:3:6) using 40mm graded stone aggregates as in supporting pillar/block including necessary form work as required complete for resting GI pipes.
KAMLESH ENTERPRISE
KARMA TSETEN BHUTIA
BIJAY MITTAL
M/S ANIL KUMAR THAKUR
DHARMINDER SINGH
NISHA CONSTRUCTIONS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .